Search

Monitoring the surface subsidence in mining areas is conducive to the prevention and control of geological disasters, and the prediction and early warning of accidents. Hunan Province is located in South China. The mineral resource reserves are abundant; however, large and medium-sized mines account for a low proportion of the total, and the concentration of mineral resource distribution is low, meaning that traditional mining monitoring struggles to meet the needs of large-scale monitoring of mining areas in the province. The advantages of Interferometric Synthetic Aperture Radar (InSAR) technology in large-scale deformation monitoring were applied to identify and monitor the surface subsidence of coal mining fields in Hunan Province based on a Sentinel-1A dataset of 86 images taken from 2018 to 2020, and the process of developing surface subsidence was inverted by selecting typical mining areas. The results show that there are 14 places of surface subsidence in the study area, and accidents have occurred in 2 mining areas. In addition, the railway passing through the mining area of Zhouyuan Mountain is affected by the surface subsidence, presenting a potential safety hazard. [ABSTRACT FROM AUTHOR]

Tianjin, China, has been suggested to have serious ground subsidence due to excessive extraction of groundwater. It is essential to monitor this subsidence, which has potential hazards and risks. Time series InSAR (TS-InSAR), such as small baselines subset (SBAS), is a powerful tool that can monitor ground deformation with high accuracy and at high spatial resolution over a long time interval. However, the high computational complexity may exceed computer memory limit when high-spatial resolution SAR (such as TerraSAR-X, TSX) images are used. In this article, the multi-look approach is introduced to the SBAS tool from StaMPS/MTI (Stanford method for persistent scatter/multi-temporal InSAR) in order to balance the spatial resolution and subsidence information in detection. The looks used for multi-looking are first fixed in terms of the accuracy of deformation and the density of coherent points. Then, the recent subsidence in Tianjin is extracted using multi-looking SBAS based on 48 TSX images acquired from 2009 to 2013. The results are validated by levelling measurements with a root mean square error (RMSE) of 4.7 mm year–1, which demonstrates that SBAS analysis can effectively monitor deformation based on multi-looking TSX acquisitions in the area under investigation. Besides, the results also show that Tianjin has been suffering from subsidence during this period, and there were two separate large subsidence basins located in this study area with more than 500 mm cumulative subsidence. Moreover, the subsidence rate increased after December 2010 in Tianjin. [ABSTRACT FROM AUTHOR]

Due to the high temporal resolution (e.g., 10 s) required, and large data volumes (e.g., 360 images per hour) that result, there remain significant issues in processing continuous ground-based synthetic aperture radar (GBSAR) data. This includes the delay in creating displacement maps, the cost of computational memory, and the loss of temporal evolution in the simultaneous processing of all data together. In this paper, a new processing chain for real-time GBSAR (RT-GBSAR) is proposed on the basis of the interferometric SAR small baseline subset concept, whereby GBSAR images are processed unit by unit. The outstanding issues have been resolved by the proposed RT-GBSAR chain with three notable features: (i) low requirement of computational memory; (ii) insights into the temporal evolution of surface movements through temporarily-coherent pixels; and (iii) real-time capability of processing a theoretically infinite number of images. The feasibility of the proposed RT-GBSAR chain is demonstrated through its application to both a fast-changing sand dune and a coastal cliff with submillimeter precision. [ABSTRACT FROM AUTHOR]

In this paper, aiming at the limitation of persistence scatterers (PS) points selection, a new method for selecting PS points has been introduced based on the average coherence coefficient, amplitude dispersion index, estimated signal-to-noise ratio and displacement standard deviation of multiple threshold optimization. The stability and quality of this method are better than that of a single model. In addition, an atmospheric correction model has also been proposed to estimate the atmospheric effects on Ground-based synthetic aperture radar (GBSAR) observations. After comparing the monitoring results before and after correction, we clearly found that the results are in good agreement with the actual observations after applying the proposed atmospheric correction approach. [ABSTRACT FROM AUTHOR]