Search

Post-operative paralytic ileus (POI) occurs after surgery because of gastrointestinal dysfunction caused by surgical invasion. We therefore investigated the frequency of POI after laparoscopic colorectal surgery in patients with colorectal cancer using a strictly defined POI diagnosis and identified associated risk factors.Patients who underwent initial laparoscopic surgery for colorectal cancer between January 2014 and December 2018 were included. The primary end point was the incidence of POI. A multivariate logistic regression analysis revealed the contributing risk factors for POI.Of the 436 patients, 94 (21.6%) had POI. Compared with the non-POI group, the POI group had significantly higher frequencies of infectious complications (p 0.001), pneumonia (p 0.001), intra-abdominal abscess (p = 0.012), anastomotic leakage (p = 0.016), and post-operative bleeding (p = 0.001). In the multivariate analysis, the right colon (odds ratio [OR] 2.180, p = 0.005), pre-operative chemotherapy (OR 2.530, p = 0.047), pre-operative antithrombotic drug (OR 2.210, p = 0.032), and post-operative complications of CD grade ≥ 3 (OR 12.90, p 0.001) were independent risk factors for POI.Post-operative management considering the risk of post-operative bowel palsy may be necessary for patients with right colon, pre-operative chemotherapy, pre-operative antithrombotic drug or severe post-operative complications.

The question as to whether laparoscopic surgery should be applied for inguinal hernia after radical prostatectomy remains a debate due to surgical difficulty arising from adhesions in the prevesical space. We report the surgical technique used in our department, its outcomes, and its safety and effectiveness compared with the surgical outcomes of primary transabdominal preperitoneal inguinal hernia repair (TAPP) cases. From February 2013 to January 2017, 30 patients with inguinal hernia were treated with TAPP after radical prostatectomy. At our institution, to avoid bladder injury, we dissect the prevesical space with the layer between the transversalis fascia and superficial layers of the preperitoneal fascia as the dissection plane. The practitioners were three qualified surgeons. Surgical outcome were compared with those of primary TAPP cases. For statistical analyses, we used t test to compare the mean operative durations and Chi square test to compare all other surgical outcomes. The median observation period was 19 months. Intraoperative and postoperative complications did not occur; no onset of recurrence and chronic pain was observed. The mean operative duration was 116.2 min, which was significantly longer than that of primary TAPP patients (87.9 min). However, the operative duration for the last 14 patients had reduced to 101.6 min, which was not significantly different from that of primary TAPP patients. In TAPP for patients following prostatectomy, surgery can be performed safely and reliably without prolonging the operative duration by selecting a skilled practitioner and standardizing the technique.

Deep regions are not visible in three-dimensional (3D) printed rapid prototyping (RP) models prepared from opaque materials, which is not the case with translucent images. The objectives of this study were to develop an RP model in which a skull base tumor was simulated using mesh, and to investigate its usefulness for surgical simulations by evaluating the visibility of its deep regions. A 3D printer that employs binder jetting and is mainly used to prepare plaster models was used. RP models containing a solid tumor, no tumor, and a mesh tumor were prepared based on computed tomography, magnetic resonance imaging, and angiographic data for four cases of petroclival tumor. Twelve neurosurgeons graded the three types of RP model into the following four categories: ‘clearly visible,’ ‘visible,’ ‘difficult to see,’ and ‘invisible,’ based on the visibility of the internal carotid artery, basilar artery, and brain stem through a craniotomy performed via the combined transpetrosal approach. In addition, the 3D positional relationships between these structures and the tumor were assessed. The internal carotid artery, basilar artery, and brain stem and the positional relationships of these structures with the tumor were significantly more visible in the RP models with mesh tumors than in the RP models with solid or no tumors. The deep regions of PR models containing mesh skull base tumors were easy to visualize. This 3D printing-based method might be applicable to various surgical simulations.

We prepared rapid prototyping models of heads with unruptured cerebral aneurysm based on image data of computed tomography angiography (CTA) using a three-dimensional (3D) printer. The objective of this study was to evaluate the anatomical reproducibility and accuracy of these models by comparison with the CTA images on a monitor. The subjects were 22 patients with unruptured cerebral aneurysm who underwent preoperative CTA. Reproducibility of the microsurgical anatomy of skull bone and arteries, the length and thickness of the main arteries, and the size of cerebral aneurysm were compared between the CTA image and rapid prototyping model. The microsurgical anatomy and arteries were favorably reproduced, apart from a few minute regions, in the rapid prototyping models. No significant difference was noted in the measured lengths of the main arteries between the CTA image and rapid prototyping model, but errors were noted in their thickness (p < 0.001). A significant difference was also noted in the longitudinal diameter of the cerebral aneurysm (p < 0.01). Regarding the CTA image as the gold standard, reproducibility of the microsurgical anatomy of skull bone and main arteries was favorable in the rapid prototyping models prepared using a 3D printer. It was concluded that these models are useful tools for neurosurgical simulation. The thickness of the main arteries and size of cerebral aneurysm should be comprehensively judged including other neuroimaging in consideration of errors.

To investigate the association between subarachnoid hemorrhage-induced delayed cerebral vasospasm (DCVS) and oxidative stress, an oxidation product, hydroperoxide, was measured in 3 specimens: peripheral arterial blood, cerebrospinal fluid (CSF), and internal jugular venous blood (IJVB).Hydroperoxide was measured using the diacron reactive oxygen metabolites (d-ROMs) test. The hydroperoxide levels were evaluated based on the rate of change in the d-ROMs test value on day 6 relative with that on day 3 (d-ROMs change rate).The subjects were 20 patients. The d-ROMs change rate in IJVB was significantly higher in patients with DCVS on day 6 than in those without it (P.01). When the patients were classified into the following 3 groups: Group A (no DCVS occurred throughout the clinical course); Group B (DCVS occurred, but no cerebral infarction [CI] was induced); and Group C (DCVS occurred and caused CI), the d-ROMs change rate in IJVB was the highest in Group C, followed by Group B then A (P.01). The d-ROMs change rates in peripheral arterial blood and CSF were not related to the development of DCVS.It was concluded that the more severe DCVS occurs and is more likely to progress to CI as the IJVB hydroperoxide level rises early after the development of subarachnoid hemorrhage.

The clinical characteristics of head trauma were evaluated in 18 wrestlers belonging to a female professional wrestling organization, 13 regular members and five trainees aged 15-34 years. Medical examinations for head trauma were performed in all wrestlers, and wrestlers treated at our emergency outpatient department were clinically evaluated. In addition, the relationships of head trauma with duration of the wrestling career of 1-16 years (mean 8 years) in the regular members, and less than 1 year in the five trainees, and body mass index (BMI) of 21.0-32.0 in the 16 subjects, excluding two trainees, was evaluated. Chronic symptoms were noted in four of the 18 wrestlers with long wrestling careers (16 years in 1, 13 years in 1, and 5 years in 2). Three wrestlers with symptoms immediately after head trauma showed recurrent retrograde amnesia and had low BMI (21.6, 21.6, and 23.1). Five wrestlers were treated at our emergency outpatient clinic, three required hospitalization and two showed intracranial traumatic changes on computed tomography (acute subdural hematoma in 1 and diffuse brain swelling in 1). Head trauma in female professional wrestlers is associated with longer wrestling career and low BMI. Periodic medical examinations are recommended to monitor for signs of head trauma.

The trans-sylvian approach is one of the most frequently employed neurosurgical procedures, but it is difficult for medical students to understand the approach stereoscopically. A three-dimensional model equipped with an arachnoid membrane and sylvian vein was developed which can be repeatedly used to simulate surgery for the education of medical students and residents in the trans-sylvian approach. The model was prepared using existing models of the skull bone, brain, and cerebral artery. Polyvinylidene chloride film, commonly used as plastic wrap for food, was adopted for the arachnoid membrane, and wetted water-insoluble tissue paper for the arachnoid trabeculae. The sylvian vein was prepared by ligating woolen yarn with cotton lace thread at several sites. Students and residents performed the trans-sylvian approach under a microscope, and answered a questionnaire survey. Using this model, simulation of division of the arachnoid membrane and arachnoid trabeculae, and dissection of the sylvian vein was possible. In the questionnaire, the subjects answered 8 questions concerning understanding of the stereoscopic anatomy of the sylvian fissure, usefulness of the simulation, and interest in neurosurgical operation using the following ratings: yes, very much; yes; somewhat; not very much; or not at all. All items rated as ‘yes, very much’ and ‘yes’ accounted for more than 70% of answers. This model was useful for medical students to learn the trans-sylvian approach. In addition, repeated practice is possible using cheap materials, which is advantageous for an educational model.

Punch-drunk syndrome (PDS) refers to a pathological condition in which higher brain dysfunction occurs in a delayed fashion in boxers who have suffered repeated blows to the head. However, the underlying mechanisms remain unknown. This study attempted to elucidate the mechanism of higher brain dysfunction observed following skull vibration in two experiments involving a rat model of PDS. Experiment 1 evaluated the effects of edaravone on histological changes in the rat brain tissue after skull vibration (frequency 20 Hz, amplitude 4 mm, duration 60 minutes). The amount of free radicals formed in response to skull vibration was very small, and edaravone administration reduced the number of glial fibrillary acidic protein and advanced glycation end product-positive cells. Experiment 2 examined the time course of change in learning ability following skull vibration in Tokai High Avoider rats. The learning ability of individual rats was evaluated by the Sidman-type electric shock avoidance test 5 days after the last session of skull vibration or final anesthesia and once a month for 9 consecutive months. Delayed learning disability was not observed in rats administered edaravone immediately after skull vibration. These results suggest that free radical-induced astrocyte activation and subsequent glial scar formation contribute to the occurrence of delayed learning disabilities. Edaravone administration after skull vibration suppressed glial scar formation, thereby inhibiting the occurrence of delayed learning disabilities.