Search

Artificial intelligence (AI) in hand surgery is an emerging and evolving field that will likely play a large role in the future care of our patients. However, there remain several challenges to makes this technology meaningful, acceptable and usable at scale. In this review article, we discuss basic concepts in AI, including challenges and key considerations, provide an update on how AI is being used in hand and wrist surgery and propose potential future applications. The aims are to equip clinicians and researchers with the basic knowledge needed to understand and explore the incorporation of AI in hand surgery within their own practice and recommends further reading to develop knowledge in this emerging field. [ABSTRACT FROM AUTHOR]

The use of three-dimensional (3-D) technology in upper extremity surgery has the potential to revolutionize the way that hand and upper limb procedures are planned and performed. 3-D technology can assist in the diagnosis and treatment of conditions, allowing virtual preoperative planning and surgical templating. 3-D printing can allow the production of patient-specific jigs, instruments and implants, allowing surgeons to plan and perform complex procedures with greater precision and accuracy. Previously, cost has been a barrier to the use of 3-D technology, which is now falling rapidly. This review article will discuss the current status of 3-D technology and printing, including its applications, ethics and challenges in hand and upper limb surgery. We have provided case examples to outline how clinicians can incorporate 3-D technology in their clinical practice for congenital deformities, management of acute fracture and malunion and arthroplasty. [ABSTRACT FROM AUTHOR]

Background: Distal ulna fracture fixation plates commonly cause irritation, necessitating removal, due to the narrow area between the ulna articular cartilage and the extensor carpi ulnaris. This study defines the safe zone for plate application and determines whether wrist position affects risk of impingement. Methods: Four different distal ulna anatomic plates (Acumed, Medartis, Skeletal Dynamics, and Synthes) were applied to 12 cadaveric specimens. Safe zone size was measured in circumferential distance and angular arc. Impingement was examined in flexion and extension in neutral, pronation, and supination. Results: The distal ulna safe zone has dimensions of a 92° arc and perimeter circumference of 15 mm. Cumulative extensor carpi ulnaris (ECU) impingement occurred in 0% of the 6 simulated wrist/forearm positions for the Acumed plate, 22% for the Synthes plate, 31% for the Skeletal Dynamics plate, and 68% for the Medartis plate. Impingement was most common in supination. Likelihood of ECU impingement significantly decreased in the following order; Medartis > Skeletal Dynamics > Synthes > Acumed. Conclusion: The ECU tendon's mobility can cause impingement on ulnarly placed distal ulna plates. Intra-operative testing should be performed in supination. Take home points regarding each plate from the 4 different manufacturers: contouring of Medartis plates, when placed ulnarly, is mandatory. The Acumed plate impinged the least but is not designed for far-distal fractures. The Synthes plate is least bulky but not suitable for proximal fractures. The Skeletal Dynamics plate appeared the most versatile with a reduced incidence of impingement compared to other ulnarly based plates. [ABSTRACT FROM AUTHOR]

Three cases are presented in which neurosurgical reconstruction of a Neonatal Brachial Plexus Palsy was combined with orthopaedic reconstruction of a posterior glenohumeral dislocation. The authors believe that a combined procedure is indicated if the neurological deficit meets the criteria for neural reconstruction and the complication of a posterior glenohumeral dislocation has occurred prior to nerve surgery. Two children with C5-6 lesions and a third child with a pan-plexus lesion obtained good shoulder function following the combined reconstruction. [ABSTRACT FROM AUTHOR]

The abductor pollicis longus (APL) is one of the primary radial deviators of the wrist, owing to its insertion at the base of the first metacarpal and its large moment arm about the radioulnar deviation axis. Although it plays a vital role in surgical reconstructions of the wrist and hand, it is often neglected while simulating wrist motions in vitro . The aim of this study was to observe the effects of the absence of APL on the distribution of muscle forces during wrist motions. A validated physiological wrist simulator was used to replicate cyclic planar and complex wrist motions in cadaveric specimens by applying tensile loads to six wrist muscles – flexor carpi radialis (FCR), flexor carpi ulnaris, extensor carpi radialis longus (ECRL), extensor carpi radialis brevis, extensor carpi ulnaris (ECU) and APL. Resultant muscle forces for active wrist motions with and without actuating the APL were compared. The absence of APL resulted in higher forces in FCR and ECRL – the synergists of APL – and lower forces in ECU – the antagonist of APL. The altered distribution of wrist muscle forces observed in the absence of active APL control could significantly alter the efficacy of in vitro experiments conducted on wrist simulators, in particular when investigating those surgical reconstructions or rehabilitation of the wrist heavily reliant on the APL, such as treatments for basal thumb osteoarthritis. [ABSTRACT FROM AUTHOR]