Search

Hydrophobic ion pairing is a promising strategy to raise the lipophilic character of therapeutic peptides and proteins. In past studies, docusate, an all-purpose surfactant with a dialkyl sulfosuccinate structure, showed highest potential as hydrophobic counterion. Being originally not purposed for hydrophobic ion pairing, it is likely still far away from the perfect counterion. Thus, within this study, docusate analogues with various linear and branched alkyl residues were synthesized to derive systematic insights into which hydrophobic tail is most advantageous for hydrophobic ion pairing, as well as to identify lead counterions that form complexes with superior hydrophobicity. The successful synthesis of the target compounds was confirmed by FT-IR, 1 H-NMR, and 13 C-NMR. In a screening with the model protein hemoglobin, monostearyl sulfosuccinate, dioleyl sulfosuccinate, and bis(isotridecyl) sulfosuccinate were identified as lead counterions. Their potential was further evaluated with the peptides and proteins vancomycin, insulin, and horseradish peroxidase. Dioleyl sulfosuccinate and bis(isotridecyl) sulfosuccinate significantly increased the hydrophobicity of the tested peptides and proteins determined as logP or lipophilicity determined as solubility in 1-octanol, respectively, in comparison to the gold standard docusate. Dioleyl sulfosuccinate provided an up to 8.3-fold higher partition coefficient and up to 26.5-fold higher solubility in 1-octanol than docusate, whereas bis(isotridecyl) sulfosuccinate resulted in an up to 6.7-fold improvement in the partition coefficient and up to 44.0-fold higher solubility in 1-octanol. The conjugation of highly lipophilic alkyl tails to the polar sulfosuccinate head group allows the design of promising counterions for hydrophobic ion pairing. STATEMENT OF SIGNIFICANCE: Hydrophobic ion pairing enables efficient incorporation of hydrophilic molecules into lipid-based formulations by forming complexes with hydrophobic counterions. Docusate, a sulfosuccinate with two branched alkyl tails, has shown highest potential as anionic hydrophobic counterion. As it was originally not purposed for hydrophobic ion pairing, its structure is likely still far away from the perfect counterion. To improve its properties, analogues of docusate with various alkyl tails were synthesized in the present study. The investigation of different alkyl residues allowed to derive systematic insights into which tail structures are most favorable for hydrophobic ion pairing. Moreover, the lead counterions dioleyl sulfosuccinate and bis(isotridecyl) sulfosuccinate bearing highly lipophilic alkyl tails provided a significant improvement in the hydrophobicity of the resulting complexes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier Ltd.)

Considering the remarkable applicability of ionic liquids (ILs) in bio-catalysis involving enzymes, herein, we report new IL based aqueous microemulsions as a catalytic reactor for cytochrome c (Cyt-c). Microemulsions (μEs), comprising water as the polar component, imidazolium (cation) and dioctylsulfosuccinate (AOT) (anion) based biamphiphilic ionic liquid (BAIL) as the surfactant and a hydrophobic ionic liquid (HIL) as the non-polar component have been prepared and characterized. The use of BAIL has promoted the formation of μEs without any co-surfactant, owing to its higher surface activity. The effect of ester- or amide-functionalization of the alkyl chain of the imidazolium cation of BAILs on the phase behavior of μEs has been investigated. The prepared μEs have been characterized via conductivity, dynamic light scattering (DLS), UV-vis absorption and steady-state fluorescence (using external polarity probes) techniques. The prepared μEs have been employed as nano-reactors for exploring the catalytic activity of Cyt-c. The formed BAIL-water nano-interfaces in reverse μEs have exerted a positive effect on the catalytic activity of Cyt-c stored in a water pool of reverse μEs. A five-fold higher rate constant in μEs as compared to buffer establishes μEs as a better catalytic medium. Furthermore, the differing nature of nano-interfaces created by BAILs and water in reverse μEs, depending on the functionalization of the alkyl chain of the cationic part of BAIL, has exerted varying influence on the catalytic activity of Cyt-c. It is expected that the present work will result in providing a versatile platform for the creation of new IL and water based μEs for bio-catalytic applications.

The structure and conductivity of AOT (sodium bis(2-ethylhexyl) sulfosuccinate) solutions (2.5 × 10 -4 -2.5 × 10 -1 M) in n-hexadecane-chloroform mixture at the chloroform concentration from 50 to 100 vol% were studied. The diffusion ordered spectroscopy NMR study revealed that in the indicated range, the observed hydrodynamic diameter of micelles depends only on the AOT concentration and does not depend on the chloroform content. Molar fractions of free AOT molecules and those aggregated into micelles were calculated using the Lindman's law: at concentrations above 2.5 × 10 -1 М, the solutions contain mostly the micelles, whereas at concentrations below 2.5 × 10 -4 M, the solutions contain AOT molecules. The transition region contains both the AOT molecules and the micelles. Conductivity measurements were used to determine free charge carriers in the bulk of solutions and their contributions to conductivity., (© 2020 Wiley-VCH GmbH.)

Encapsulation of crocin (CN), having large nonlinear optical (NLO) properties, can be utilized in studies of photodynamic therapy (PDT). For this purpose, photo-physical and NLO properties of CN encapsulation with and without cell culture medium (CCM) were investigated. As well, nonlinear absorption (NLA) coefficient and nonlinear refractive (NLR) indices were found to be 10 -7 (cm W -1 ) and 10 -12 (cm 2  W -1 ); respectively. The results revealed that NLO properties of CN had changed through its dipole moment. Reflecting on the theory of Bilot and Kawski, it was evidenced that the dipole moment of CN could change with a nano-droplet size. Furthermore, it was demonstrated that RPMI-1640 as a growth medium had failed to change NLO properties of CN encapsulated in nano-droplet. Accordingly, the encapsulated CN in nano-droplet in the form of a photosensitizer (PS) was suggested as a good candidate to examine PDT under in-vitro conditions.

Objective: The aim of this study was to develop self-emulsifying drug delivery systems (SEDDS) for oral delivery of therapeutic proteins through hydrophobic ion pairing. Method: Horseradish peroxidase (HRP), a model protein, was ion paired with sodium docusate to increase its hydrophobicity. The formed enzyme - surfactant complex was incorporated into SEDDS, followed by permeation studies across Caco-2 cell monolayer and freshly excised rat intestine. Results: Hydrophobic ion pairs (HIP) were formed between HRP and sodium docusate with the efficiency of 87.49 ± 1.35%. The formed complex maintained 60.97 ± 1.48% of the original enzyme activity. The ion pair was subsequently loaded into SEDDS with a payload of 0.1% (mass per cent, m/m). The obtained emulsion formed by SEDDS had a droplet size in the range from 20 to 200 nm with negative zeta potential. Permeation mechanism of the enzyme was energy-dependent and the encapsulation of the HIP complex in SEDDS enhanced the permeation of the enzyme through the Caco-2 cell monolayer and freshly excised rat intestine by 4 times and 2.5 times compared to the free enzyme, respectively. Conclusion: According to these findings, hydrophobic ion pairing followed by incorporation to SEDDS might be considered as a potential strategy for oral delivery of therapeutic proteins.

A high resolution mass spectrometry method was developed for the environmental impact monitoring of oil spill dispersants. Previously reported instability of dioctyl sulfosuccinate (DOSS) dispersant tracer was addressed by the new procedure. The method monitors both DOSS and its degradation product, monooctyl sulfosuccinate (MOSS), by liquid chromatography time-of-flight mass spectrometry. The related isomer, 4-(2-ethylhexyl) 2-sulfobutanedioate, was chromatographically resolved from MOSS but was not a product of DOSS degradation. Using this direct injection method (10 μL), the practical lower limit of quantitation was 0.5 nM for each analyte, a concentration equivalent to 0.22 ng mL -1 , or 0.30 ng mL -1 including initial dilution factor with acetonitrile. The method was shown applicable to analysis of the dispersants Corexit® EC9500 A, Finasol OSR 52, Slickgone NS, and Slickgone EW for which DOSS is an active ingredient. A marine microcosm study of Corexit EC9500A, together with diluted bitumen (dilbit), at 15 ± 1 °C, provided evidence of the stoichiometric conversion of DOSS to MOSS under conditions reflecting a western Canadian marine environment. The advantage of the developed method is in its ability to extend environmental seawater sample collection time from 4 days for DOSS alone, to 14 days when both DOSS and MOSS are simultaneously analysed and results combined. The collection time is likely extended beyond the 14 day period with cooler temperatures. Preservation of collected seawater samples using sodium hydroxide, converting DOSS into MOSS in situ, was rejected due to stability issues. Addition of disodium ethylenediaminetetraacetic acid did not improve hold times, thus eliminating the theory of cation induced micelle effects causing DOSS loss., (Copyright © 2019. Published by Elsevier B.V.)

Peptides are rarely orally administrated due to rapid degradation in the gastrointestinal tract and low absorption at the epithelial border. The objective of this study was to encapsulate a model water-soluble peptide in biodegradable and biocompatible solid lipid-based nanoparticles, i.e. Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) in order to protect it from metabolic degradation. Leuprolide (LEU) and a LEU-docusate Hydrophobic Ion Pair (HIP) were encapsulated in SLN and NLC by High Pressure Homogenization. The particles were characterized regarding their Encapsulation Efficiency (EE), size, morphology, peptide release in FaSSIF-V2, and protective effect towards proteases. Nanoparticles of 120 nm with platelet structures were obtained. Formation of HIP led to a significant increase in LEU EE. Particle size was moderately affected by the presence of simulated fluids. Nonetheless, an important burst release was observed upon dispersion in FaSSIF-V2. NLC were able to improve LEU-HIP resistance to enzymatic degradation induced by trypsin but presented no advantages in presence of α-chymotrypsin. SLN provided no protection regarding both proteases. Despite an increased amount of encapsulated peptide in solid lipid-based nanoparticles following HIP formation, the important specific surface area linked to their platelet structures resulted in an important peptide release upon dispersion in FaSSIF-V2 and limited protection towards enzymatic degradation., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The toxic action of surfactant used as a stabilizer of metal nanoparticles have been studied with the aim to determine separate contributions of surfactant monomers and micelles to cell viability decrease. Basing on (1) the well-known ability of surfactant molecules to form micelles in solution at a critical micelle concentration (CMC) and (2) the results reported in literature, showing that toxicity of various surfactants increases when their concentration exceeds CMC, we supposed that surfactant molecules and micelles may differ in their toxic effect on cells. This supposition was verified on the anionic surfactant aerosol-OT (AOT) used as a stabilizer of silver nanoparticles (AgNPs) in studies of their cytotoxicity on Jurkat cells by means of the MTT test. Two samples of AgNPs stabilized with AOT in concentrations higher (3 mM) and lower (1 mM) than its CMC in water were introduced to the cell medium as water solutions diluted to obtain nanoparticle concentrations in the range 1-7 μg/mL. Cell viability changes were registered after 24 h incubation. It was found that AgNPs of similar average size (about 16 nm), synthesized by the same procedure, introduced to the same concentrations in cell medium, produced a different effect on cell viability. Namely, decrease in cell viability was observed for AgNPs with 3 mM AOT, while no noticeable changes were registered for AgNPs with 1 mM AOT. A similar difference was detected for the corresponding dilutions of 3 mM and 1 mM AOT water solutions. We assumed that the toxicity dependence on AOT concentration originated from the difference in toxic action of the two different AOT forms - molecules (monomers) and micelles - present in the AgNPs and AOT solution. The approach was suggested for estimation of the separate contributions of monomers and micelles to the total AOT toxicity; changes of these contributions with AgNPs or AOT concentration were also determined. The results obtained may prove to be useful in studies of the biological activity of surfactants applied both as nanoparticle stabilizers and as agents working in medicine as suppressors of various infections., (Copyright © 2019 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The present study investigated oil dispersant toxicity to fish species typical of the cooler regions of Canada, together with less well-documented issues pertaining to oil dispersant monitoring. The oil dispersant toxicity of Corexit EC9500A was assessed for the freshwater fish species rainbow trout and the seawater species coho, chinook, and chum, with a final median lethal concentration (LC50) acute lethality range between 35.3 and 59.8 mg/L. The LC50 range was calculated using confirmed 0-h dispersant concentrations that were justified by fish mortality within the first 24 h of exposure and by variability of the dispersant indicator dioctyl sulfosuccinate (DOSS) used to monitor concentrations at later time points. To investigate DOSS as an oil dispersant indicator in the environment, microcosm systems were prepared containing Corexit EC9500A, Finasol OSR52, Slickgone NS, and Slickgone EW dispersants together with diluted bitumen. The DOSS indicator recovery was found to be stable for up to 13 d at 5 °C, 8 d at 10 °C, but significantly less than 8 d at ≥15 °C. After 3 d at temperatures ≥15 °C, the DOSS indicator recovery became less accurate and was dependent on multiple environmental factors including temperature, microbial activity, and aeration, with potential for loss of solvents and stabilizers. A final assessment determined DOSS to be a discrepant indicator for long-term monitoring of oil dispersant in seawater. Environ Toxicol Chem 2018;37:1309-1319. © 2018 SETAC., (© 2018 SETAC.)

Effective and efficient spreading of drug formulations on the pulmonary mucosal layer is key to successful delivery of therapeutics through the lungs. The pulmonary mucus layer, which covers the airway surface, acts as a barrier against therapeutic agents, especially in the case of chronic lung diseases due to increased thickness and viscosity of the mucus. Therefore, spreading of the drug formulations on the airways gets harder. Although spreading experiments have been conducted with different types of formulations on mucus-mimicking subphases, a highly effective formulation is yet to be discovered. Adding surfactant to such formulations decreases the surface tension and triggers the Marangoni forces to enhance the spreading behavior. In this study, catanionic (cationic + anionic) surfactant mixtures composed of dodecyltrimethylammonium bromide (DTAB) and dioctyl sulfosuccinate sodium salt (AOT) mixed at various mole ratios are prepared and their spreading behavior on both mucin and cystic fibrosis (CF) mucus models is investigated for the first time in the literature. Synergistic interaction is obtained between the components of the DTAB/AOT mixtures, and this interaction has enhanced the spreading of the formulation drop on both the mucin and CF mucus models when compared with the spreading performances of selected conventional surfactants. It is proposed that the catanionic surfactant mixtures, especially when mixed at the molar ratios of 8/2 and 7/3 (DTAB/AOT), improve the spreading even on the cystic fibrosis sputum model. As it is vital to transport a sufficient amount of drug to the targeted region for the treatment of diseases, this study presents an important application of the fundamentals of colloidal science to pharmaceutical nanotechnology.

Reverse micelles (RMs) made with sodium bis(2-ethylhexyl)sulfosuccinate suspended in isooctane are commonly used experimental models of aqueous microenvironments. However, there are important unanswered questions about the very characteristic that makes them of interest, namely their size. To explore the factors that determine the size of RMs, all-atom molecular dynamics simulations of RMs with different sizes but the same water-loading ratio were performed. An Anton 2 machine was used so that systems of the necessary size could be extended into the microsecond timescale, and mass exchange processes could be observed. Contrary to hypothesis, there were no net gains or losses of water by diffusion between RMs of different size. However, gains and losses did occur following fusion events. RM fusion followed RM contact only when waters were present among the hydrophobic surfactant chains at the point of contact. The presence of an encapsulated 40-residue amyloid beta peptide did not directly promote RM fusion, but it quickly and efficiently terminated each fusion event. Before fusion terminated, however, the size of the peptide-containing RM increased without a corresponding change in its water-loading ratio. We conclude that the mass transfer between RMs is most likely accomplished through transient fusion events, rather than through the diffusion of component molecules through the organic phase. The behavior of the amyloid beta peptide in this system underscores its propensity to embed in, and fold in response to, multiple interactions with the surfactant layer.

In the present work, milled nanocrystals of a poorly soluble compound using different stabilizers were prepared and characterized. The aim of the study was to evaluate a fundamental set of properties of the formulations prior to i.v. injection of the particles. Two polyethylene oxide containing stabilizers; (distearoyl phosphatidylethanol amine (DSPE)) -PEG2000 and the triblock copolymer Pluronic F127, were investigated, with and without polyvinylpyrrolidone K30/Aerosol OT (PVP/AOT) present. The solubility in water was around 10nM for the compound, measured from nanocrystals, but 1000 times higher in 4% human serum albumin. The particles were physically stable during the time investigated. The zeta potential was around -30 and -10mV for DSPE-PEG2000 and Pluronic F127 stabilized particles, respectively, at the conditions selected. The dissolution rate was similar for all four formulations and similar to the theoretically predicted rate. Critical micelle concentrations were determined as 56nM and 1.4μM for DSPE-PEG2000 and Pluronic F127, respectively. The adsorption isotherms for the PEG lipid showed a maximum adsorbed amount of about 1.3mg/m 2 , with and without PVP/AOT. Pluronic F127 showed a higher maximum amount adsorbed, at around 3.1mg/m 2 , and marginally lower with PVP/AOT present. Calculated data showed that the layer of Pluronic F127 was thicker than the corresponding DSPE-PEG2000 layer. The total amount of particles distributed mainly to the liver, and the hepatocellular distribution in vitro (Liver sinusoidal endothelial cells and Kupffer cells), differed depending on the stabilizing mixture on the particles. Overall, DSPE-PEG2000 stabilized nanocrystals (with PVP/AOT) accumulated to a larger degree in the liver compared to particles with Pluronic F127 on the surface. A theoretical model was developed to interpret in vivo pharmacokinetic profiles, explaining the balance between dissolution and liver uptake. With the present, fundamental data of the nanocrystal formulations, the platform for forthcoming in vivo studies was settled., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this study, surfactant dioctyl sodium sulphosuccinate (DOSS)-mediated immobilized bacterial pretreatment of waste activated sludge (WAS) was experimentally proved to be an efficient and economically feasible process for enhancing the biodegradability of WAS. The maximal floc disruption with negligible cell cleavage was achieved at surfactant dosage of 0.009 g/g SS. Results of the outcome of bacterial pretreatment of sludge biomass revealed that chemical oxygen demand (COD) solubilization for deflocculated (EPS removed-bacterially pretreated) sludge was 20 %, which was higher than that of flocculated (14 %) or control (5 %). The pretreatment was swift in deflocculated sludge with a rate constant of about 0.064 h -1 . Biochemical methane potential (BMP) assay resulted in significant methane yield at 0.24 gCOD/gCOD for deflocculated sludge. Economic assessment of the proposed method showed a net profit of about 57.39 USD/ton of sludge.

The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 8 dialkyl sulfosuccinate salts for use in cosmetics, finding that these ingredients are safe in cosmetics in the present practices of use and concentration when formulated to be nonirritating. The dialkyl sulfosuccinate salts primarily function as surfactants in cosmetics. The Panel reviewed the new and existing available animal and clinical data in making its determination of safety. The Panel found it appropriate to extrapolate the data on diethylhexyl sodium sulfosuccinate to assess the safety of the entire group because all of the diesters are of a similar alkyl chain length, all are symmetrically substituted, and all have similar functions in cosmetic formulations., (© The Author(s) 2016.)

Keeping in view the role of neurotransmitters (NTs) in central nervous system diseases and in controlling various physiological processes, present study is aimed to study the binding of neurotransmitters (NTs) such as norepinephrine hydrochloride (NE) and serotonin hydrochloride (5-HT) with twin tailed surfactant sodium bis(2-ethylhexyl)sulfosuccinate (AOT). Spectroscopic and electrochemical measurements combined with microcalorimetric measurements were used to characterize the interactions between AOT and NTs. Meteoric modifications to emission profile and absorption spectra of NTs upon addition of AOT are indicative of the binding of NTs with AOT. Distinct interactional states such as formation of ion-pairs, induced and regular micelles with adsorbed NTs molecules have been observed in different concentration regimes of AOT. The formation of ion-pairs from oppositely charged NTs and AOT is confirmed by the reduced absorbance, quenched fluorescence intensity and decrease in peak current (ipa) as well as shifts in peak potential (Epa) values. The stoichiometry and formation of the NTs-AOT complexes has been judged and the extent of interactions is quantitatively discussed in terms of binding constant (K) and free energy of binding (ΔG°). The enthalpy (ΔH°mic) and free energy of micellization (ΔG°mic) for AOT in presence and absence of NTs are determined from the enthalpy curves., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Hypothesis: Sodium dioctylsulfosuccinate (Aerosol OT or NaAOT) is a well-studied charging agent for model poly(methyl methacrylate) (PMMA) latexes dispersed in nonpolar alkane solvents. Despite this, few controlled variations have been made to the molecular structure. A series of counterion-exchanged analogs of NaAOT with other alkali metals (lithium, potassium, rubidium, and cesium) were prepared, and it was expected that this should influence the stabilization of charge on PMMA latexes and the properties of the inverse micelles., Experiments: The electrophoretic mobilities of PMMA latexes were measured for all the counterion-exchanged AOT analogs, and these values were used to calculate the electrokinetic or ζ potentials. This enabled a comparison of the efficacy of the different surfactants as charging agents. Small-angle scattering measurements (using neutrons and X-rays) were performed to determine the structure of the inverse micelles, and electrical conductivity measurements were performed to determine the ionized fractions and Debye lengths., Findings: Sodium AOT is a much more effective charging agent than any of the other alkali metal AOTs. Despite this, the inverse micelle size and electrical conductivity of NaAOT are unremarkable. This shows a significant non-periodicity in the charging efficiency of these surfactants, and it emphasizes that charging particles in nonpolar solvents is a complex phenomenon., (Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.)

A series of eight sodium sulfonic acid surfactants with differently branched tails (four double-chain sulfosuccinates and four triple-chain sulfocarballylates) were studied as charging agents for sterically stabilized poly(methyl methacrylate) (PMMA) latexes in dodecane. Tail branching was found to have no significant effect on the electrophoretic mobility of the latexes, but the number of tails was found to influence the electrophoretic mobility. Triple-chain, sulfocarballylate surfactants were found to be more effective. Several possible origins of this observation were explored by comparing sodium dioctylsulfosuccinate (AOT1) and sodium trioctylsulfocarballylate (TC1) using identical approaches: the inverse micelle size, the propensity for ion dissociation, the electrical conductivity, the electrokinetic or ζ potential, and contrast-variation small-angle neutron scattering. The most likely origin of the increased ability of TC1 to charge PMMA latexes is a larger number of inverse micelles. These experiments demonstrate a small molecular variation that can be made to influence the ability of surfactants to charge particles in nonpolar solvents, and modifying molecular structure is a promising approach to developing more effective charging agents.

Knowledge of how intermolecular interactions of amyloid-forming proteins cause protein aggregation and how those interactions are affected by sequence and solution conditions is essential to our understanding of the onset of many degenerative diseases. Of particular interest is the aggregation of the amyloid-β (Aβ) peptide, linked to Alzheimer's disease, and the aggregation of the Sup35 yeast prion peptide, which resembles the mammalian prion protein linked to spongiform encephalopathies. To facilitate the study of these important peptides, experimentalists have identified small peptide congeners of the full-length proteins that exhibit amyloidogenic behavior, including the KLVFFAE sub-sequence, Aβ16-22, and the GNNQQNY subsequence, Sup357-13. In this study, molecular dynamics simulations were used to examine these peptide fragments encapsulated in reverse micelles (RMs) in order to identify the fundamental principles that govern how sequence and solution environment influence peptide aggregation. Aβ16-22 and Sup357-13 are observed to organize into anti-parallel and parallel β-sheet arrangements. Confinement in the sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles is shown to stabilize extended peptide conformations and enhance peptide aggregation. Substantial fluctuations in the reverse micelle shape are observed, in agreement with earlier studies. Shape fluctuations are found to facilitate peptide solvation through interactions between the peptide and AOT surfactant, including direct interaction between non-polar peptide residues and the aliphatic surfactant tails. Computed amide I IR spectra are compared with experimental spectra and found to reflect changes in the peptide structures induced by confinement in the RM environment. Furthermore, examination of the rotational anisotropy decay of water in the RM demonstrates that the water dynamics are sensitive to the presence of peptide as well as the peptide sequence. Overall, our results demonstrate that the RM is a complex confining environment where substantial direct interaction between the surfactant and peptides plays an important role in determining the resulting ensemble of peptide conformations. By extension the results suggest that similarly complex sequence-dependent interactions may determine conformational ensembles of amyloid-forming peptides in a cellular environment.

Carrier with high drug loading content is one of the most important issues in drug delivery system. In the present work, an ion-pair amphiphilic molecule composed of anticancer drug cation and surfactant anion is used for straightforward fabricating vesicles for cancer therapy. Anticancer drug (cytarabine hydrochloride) and anionic surfactant (AOT) are selected for the fabrication of ion-pair amphiphilic molecule. One amphiphilic molecule contains one drug cation, thus the drug loading content is 50% (mol/mol) in theory. The in vitro drug release study shows that the release time of cytarabine is about 3 times of the pure cytarabine solution and the permeability of cytarabine has been improved about 160 times tested by parallel artificial membrane permeability assay model. However, the hemolytic toxicity is largely decreased in the studied concentration range. The in vitro cytotoxicity results show that cytarabine-AOT amphiphiles have a much lower IC50 (drug concentration resulting in 50% cell death) value and a higher cell inhibition rate comparing with their respective components, indicating its effective therapy for leukemic cells. To obtain a longer and a convenient drug release system, the prepared vesicles are further incorporated into the thermosensitive PLGA-PEG-PLGA hydrogel to prepare a subcutaneous administration. The in vivo drug release results indicate that cytarabine-AOT vesicle-loaded hydrogel is a good injectable delivery system for controlled release of cytarabine for cancer therapy., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Photodynamic therapy is a potentially curative treatment for various types of cancer. It involves energy transfer from an excited photosensitizer to surrounding oxygen molecules to produce cytotoxic singlet oxygen species, a process termed as type II reaction. The efficiency of photodynamic therapy is greatly reduced because of the reduced levels of oxygen, often found in tumor microenvironments that also house cancer stem cells, a subpopulation of tumor cells that are characterized by enhanced tumorigenicity and resistance to conventional therapies. We show here that encapsulation of a photosensitizer, methylene blue, in alginate-Aerosol OT nanoparticles leads to an increased production of reactive oxygen species (ROS) under both normoxic and hypoxic conditions. ROS generation was found to depend on the interaction of the cationic photosensitizer with the anionic alginate polymer. Dye-polymer interaction was characterized by formation of methylene blue dimers, potentially enabling electron transfer and a type I photochemical reaction that is less sensitive to environmental oxygen concentration. We also find that nanoparticle encapsulated methylene blue has the capacity to eliminate cancer stem cells under hypoxic conditions, an important goal of current cancer therapy.

Negatively charged supramolecular aggregates formed in vacuo by n bis(2-ethylhexyl)sulfosuccinate (AOT(-)) anions and n + n(c) sodium counterions (i.e., [AOT(n) Na(n+nc)](nc)) have been investigated by molecular dynamics (MD) simulations for n = 1 to 20 and n(c) = -1 to -5. By comparing the maximum excess charge values of negatively and positively charged AOTNa aggregates, it is found that the charge storage capability is higher for the latter systems, the difference decreasing as the aggregation number increases. Statistical analysis of physical properties like gyration radii and moment of inertia tensors of aggregates provides detailed information on their structural properties. Even for n(c) = -5, all stable aggregates show a reverse micelle-like structure with an internal core, including sodium counterions and surfactant polar heads, surrounded by an external layer consisting of the surfactant alkyl chains. Interestingly, the reverse micelle-like structure is retained also in proximity of fragmentation. Moreover, the aggregate shapes may be approximated by elongated ellipsoids whose longer axis increases with n and |n(c)|. The fragmentation patterns of a number of these aggregates have also been examined and have been found to markedly depend on the aggregate charge state. The simulated fragmentation patterns of a representative aggregate show good agreement with experimental data obtained using low collision voltages.

The current work investigates the apolar charging behavior of organic pigment particles and the role that synergists play in regard to particle charging. Organic pigments are often used in apolar paints, inks, and most recently electrostatic lithography. For electrolithography to work, the particles must be both stable and possess the correct polarity and magnitude of charge. It is therefore important to better understand the charging behavior and potential charging mechanisms of these particles that have received little or no attention in the literature. Unfortunately, these already complex systems are further complicated by the fact that the stability of organic pigments is often improved through the use of synergists. Synergists are designed to enhance the adsorption of steric stabilizers to the particles. However, their effect on particle charging has not been previously published. In this study, the particle zeta potential is determined for apolar dispersions of magenta and cyan particles in heptane (with and without synergist present). The particles are dispersed with three different surfactants commonly used in apolar charging studies: Span 80, Aerosol-OT, and OLOA 11000. Acid-base interactions appear to play an important role, particularly for cyan. However, due to the complexity of these systems, any general rule must be applied with caution as the particle, surfactant, and synergist chemistry all determine the nature of the particle charge., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The precise measurements of morin absorbance in presence of surfactant/solvent/water systems at 25 °C by UV-vis technique are reported. The surfactant used in presented study was sodium bis(2-ethylhexyl) sulfosuccinate called Aerosol-OT or AOT. The solvents selected were: ethanol, ethylene glycol, and n-decanol. The concentrations of AOT were varied between 0.001 and 0.4 mol/kg. Morin concentration in quvette during UV-vis registration was not equals in all solvent because of its different solubility and absorption intensity depending on the solvent. Water concentration in the studied systems was defined by R parameter according to relation: R=[H2O]/[AOT] and was equal 0, 30 and 40 in ethanol; 0, 10, 20 and 30 in ethylene glycol and 0, 10, 20, 30, and 40 in n-decanol. In presented work a Nernstian distribution of morin between the organic and micellar phases was assumed. The intensity of morin absorbance as a function of AOT concentration was analyzed. Using Non-linear Regression Procedure (NLREG) morin binding constant (K' [mol/kg]), and morin distribution constant (K) between organic phase and AOT micellar phase have been calculated. The experimental results have shown a significant influence of solvent, surfactant and water presence on morin UV-vis spectrum. Calculated data pointed out on different transfer of morin molecules from the organic to micellar phase depending on the solvent. Moreover, results of calculations indicate on competition between morin and water molecules interacting with AOT polar heads. Morin molecules privileged location in AOT reversed micelles strongly depends on the solvent. In case of systems with ethylene glycol as solvent is possible morin molecules location in polar cores of AOT reversed micelles as results of strong interaction between AOT polar heads and morin hydroxyl groups, whereas in case of ethanol and n-decanol morin molecules are located in palisade layer., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The influence of the monomer diallyldimethylammonium chloride (D) on the lamellar liquid crystal formed by the anionic surfactant aerosol OT (AOT) and water is investigated, determining the lamellar spacings by SAXS and the quadrupolar splittings by deuterium NMR, as a function of the D or AOT concentrations. The cationic monomer D induces a destabilization of the AOT lamellar structure such that, at a critical concentration higher than 5 wt %, macroscopic phase separation takes place. When the monomer, which is dissolved in the AOT lamellae, is polymerized in situ by X-ray initiation, a new collapsed lamellar phase appears, corresponding to the complexation of the surfactant with the resulting polymer. A theoretical model is employed to analyze the variation of the interactions between the AOT bilayers and the stability of the lamellar structure.

Lipase (LP) from Candida rugosa was immobilized and stabilized in polyaniline nanofibers (PANFs) via a three-step process of enzyme adsorption, precipitation, and cross-linking, which generates the final immobilization called "EAPC". The activity of EAPC was 5.1 and 5.9 times higher than those of LP immobilizations via enzyme adsorption (EA) and enzyme adsorption/cross-linking (EAC), respectively. After incubation in an aqueous buffer under shaking (200 rpm) for 84 days, EAPC maintained 74% of its initial activity, while EA and EAC retained 11 and 24% of their initial activities, respectively. Highly stable and active EAPC was employed for the resolution of racemic ibuprofen via esterification of S-(+)-ibuprofen with 1-propanol in isooctane. The addition of 100 mM dioctyl sulfosuccinate (AOT) into the reaction medium increased the esterification activity by 61-fold, which can be explained by the better dispersion of EAPC in isooctane. EAPC showed 42% conversion in the esterification of racemic ibuprofen after 102 h, whereas EA and EAC showed only 1.2 and 1.4% conversion in the same condition, respectively. The EAPC approach increases both loading and stability of LP, and the combination of EAPC with the surfactant addition can be employed for efficient enzymatic reactions in organic solvents.

In this contribution we have tried to investigate whether the mechanical properties of the reverse micellar (RM) interface dictate the physical properties of entrapped water molecules in the RM waterpool. We choose AOT/Igepal-520/cyclohexane (Cy) mixed RM as a model system which exhibits synergistic water solubilization behavior as a function of interfacial stoichiometry. Such a phenomenon associates systematic modification of the interface curvature. Dynamic light scattering (DLS) studies reveal linear increase in the droplet size and aggregation number of the RMs with increasing XIgepal (mole fraction of Igepal in the surfactant mixture). FTIR study in the 3000-3800 cm(-1) region identifies that the relative population of the surface-bound water molecules is higher in AOT RM compared to that in Igepal RM, and in mixed systems it also follows a linear trend with XIgepal. Water relaxation dynamics as probed by time-resolved fluorescence spectroscopy using Coumarin-500 also reveals an overall linear trend with no characteristic feature around the solubilization inflation point. Our study clearly identifies that the physical properties of water in RM are mostly governed by the interfacial stoichiometry and water content, and merely bares any dependence on the mechanical properties of the interface.

The concentration-dependent aggregation of two surfactants, anionic sodium dioctylsulfosuccinate (Aerosol OT or AOT) and nonionic pentaethylene glycol monododecyl ether (C12E5), has been studied in cyclohexane-D12 using small-angle neutron scattering (SANS). A clear monomer-to-aggregate transition has been observed for both surfactants, spherical inverse micelles for AOT and hank-like micelles for C12E5. This suggests that a critical micelle concentration exists for surfactants of these kinds in nonpolar solvents. The nature of the transition is different for the two surfactants. AOT aggregates are the same size and shape with decreasing concentration until a sharp critical micelle concentration, after which they cannot be detected. However, C12E5 aggregates gradually decrease in size. These differences demonstrate that the strength of the solvophobic effect can influence the formation of surfactant aggregates in nonaqueous solvents.

The main objective of this study was to evaluate the potential of lipid nanosystems for topical delivery of the naturally occurring flavonoid quercetin. These lipid based nanosystems were manufactured using a solvent free probe ultrasonication process. Formulation factors such as the nature of the lipid (solid/combination of solid and liquid) in solid lipid nanoparticle (SLN) and nanostructured lipid carrier (NLC) systems and drug loading were evaluated to produce an optimum formulation with adequate physical stability for up to 14 weeks at 2-8°C. The mean particle size of the optimized formulation was around 282 nm, with a zeta potential value of -36.57 ± 2.67 mV, indicating the formation of a stable system. Release studies showed a biphasic release profile, characterized by an initial burst release followed by a more controlled release pattern from both SLN and NLC systems. The NLC system showed the highest improvement in topical delivery of quercetin manifested by the amount of quercetin retained in full thickness human skin, compared to a control formulation with similar composition and particle size in the micrometer range. This study demonstrated the feasibility of nanostructured lipid carrier systems for improved topical delivery of quercetin., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Context: Water-in-oil microemulsions (w/o ME) are ideal for parenteral drug delivery. However, no such formulations have been tested for biocompatibility in in vitro cell cultures. Furthermore, sterilization of w/o MEs is a challenging process that has not been previously developed and validated., Purpose: To formulate pharmaceutically relevant water-in-oil (w/o) microemulsion's systems suitable for use as a parenteral formulation., Methods: w/o MEs were prepared using dioctyl sodium sulfosuccinate (DOSS), ethyl oleate (EO), and water. Formulations were characterized using polarized light microscopy, electrical conductivity, rheology, and dynamic light scattering. An aseptic filtration method for sterilization was developed using membrane filtration. The biocompatibility of selected MEs were evaluated in NIH3T3 cell cultures. Dissolution studies were performed on microemulsions containing methylene blue to evaluate the drug release profile., Results: The maximum amount of water incorporated in the formulations was 14% w/w. DOSS/EO/water microemulsions exhibited Newtonian flow. Particle sizes for these MEs were less than 30 nm in size. Formulations filtered aseptically were free of bacteria when gram-stained and visualized under a microscope. All MEs showed no toxicity to NIH 3T3 cells., Discussion: The absence of birefringence and low conductivity values indicated that the formulations were w/o microemulsions. The filtration method of sterilization was validated by the absence of microbial growth on blood agar plates over a 14-day period. In vitro dye release studies demonstrate sustained release of the model drug over a 72-h time period., Conclusion: Characteristics delineated in this study demonstrate the potential for these formulations to be used as parenteral preparations.

Nanosuspensions of the example compounds ketoconazole and itraconazole were shown to aggregate upon reducing the pH to levels comparable to that known to exist in the stomach. Manipulation of the surfactant/polymer ratio in the suspension vehicle did not elucidate the cause of the aggregation. X-ray diffraction on ketoconazole solids failed to identify a form change as causative. Ultimately, ketoconazole intrinsic dissolution rate experiments implicated surface salt formation between ketoconazole and the vehicle surfactant as the cause of the aggregation. The generality of the phenomenon is discussed., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The dependence of critical micelle concentration (cmc) of sodium dioctylsulfosuccinate (AOT) on the amount of ethylene glycol (EG) in water + EG medium was reported to be unusual and different from that of other surfactants to the extent that the cmc of AOT in EG is lower than in water. It is yet to be understood why AOT behaves so in water + EG medium, although AOT is known to have some special properties. Hence in the present study cmc of AOT in water + EG medium in the range from 0 to 100% (by weight) EG is measured by using surface tension and fluorescence emission methods. In contrast to what was reported, this study revealed that with respect to EG amount the cmc of AOT follows the general trend and AOT has higher cmc in EG than in water. On the other hand, it was surprisingly found that a break in the surface tension isotherm occurs in the premicellar region when the amount of EG exceeds 50% rendering a bisigmoidal shape to the surface tension isotherm. UV spectral study showed that AOT and EG undergo hydrogen bonding in the premicellar region when the EG amount is ≥50% and this hydrogen bonding becomes less on adding NaCl. The density functional theory calculations also showed formation of hydrogen bonds between EG and AOT through the sulfonate group of AOT providing thereby support to the experimental findings. The calculations predicted a highly stable AOT-EG-H(2)O trimer complex with a binding energy of -37.93 kcal mol(-1). The present system is an example, which is first of its kind, of a case where hydrogen bonding with surfactant and solvent molecules results in a surface tension break.

We observe standing waves of chemical concentration in thin layers [quasi-two-dimensional (2D)] and capillaries [three-dimensional (3D)] containing the aqueous Belousov-Zhabotinsky reaction in a reverse microemulsion stabilized by the ionic surfactant sodium bis-2-ethylhexyl sulfosuccinate (AOT) and with cyclo-octane as the continuous phase. The 3D structures are oscillatory lamellae or square-packed cylinders at high and low volume fractions, respectively, of aqueous droplets. These patterns correspond to oscillatory labyrinthine stripes and square-packed spots in the 2D configuration. Computer simulations, as well as observations in E. coli, give qualitative agreement with the observed patterns and suggest that, in contrast to Turing patterns, the structures are sensitive to the size and shape of the system.

The dramatic impact of differing environments on proton transfer dynamics of the photoacid HPTS prompted us to investigate these systems with two highly complementary methods: ultrafast time-resolved transient absorption and two-dimensional NMR spectroscopies. Both ultrafast time-resolved transient absorption spectroscopy and time-resolved anisotropy decays demonstrate the proton transfer dynamics depend intimately on the specific reverse micellar system. For w(0) = 10 reverse micelles formed with anionic AOT surfactant, the HPTS proton transfer dynamics are similar to dynamics in bulk aqueous solution, and the corresponding (1)H 2D NOESY NMR spectra display no cross peaks between HPTS and AOT consistent with the HPTS residing well hydrated by water in the interior of the reverse micelle water pool. In contrast, ultrafast transient absorption experiments show no evidence for HPTS photoinduced proton transfer reaction in reverse micelles formed with the cationic CTAB surfactant. In CTAB reverse micelles, clear cross peaks between HPTS and CTAB in the 2D NMR spectra show that HPTS embeds in the interface. These results indicate that the environment strongly impacts the proton transfer reaction and that complementary experimental techniques develop understanding of how location critically affects molecular responses.

The water/sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micelle (RM) system is revisited by using, for the first time, molecular probes to investigate interface properties. The solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) and 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) in the water/NaDEHP/toluene system is studied, and the results are compared with those obtained in water/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/toluene RM media. The results demonstrate that the micropolarity, microviscosity, interfacial water structure, molecular probe partition, and intramolecular electron-transfer processes are dramatically altered for NaDEHP RM interfaces in comparison to the AOT systems. Because of organic nonpolar solvent penetration into the interface, NaDEHP RM media offer an interface with lower micropolarity and microviscosity than AOT media. Also, the interfacial water in the NaDEHP system shows enhanced water-water hydrogen-bond interaction in comparison with bulk water. The AOT RM interface represents a unique environment for PRODAN to undergo dual emission., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The interaction of amphiphilic molecules such as lipids and surfactants with the hydrophilic drug carboplatin was investigated to identify suitable self-assembling components for a potential gel-based delivery formulation. (1) H-NMR Studies in sodium bis(2-ethylhexyl) sulfosuccinate (aerosol-OT, AOT)-based reverse micelles show that carboplatin associates and at least partially penetrates the surfactant interface. Langmuir monolayers formed by dipalmitoyl(phosphatidyl)choline are penetrated by carboplatin. Carboplatin was found to also penetrate the more rigid monolayers containing cholesterol. A combined mixed surfactant gel formulation containing carboplatin and cholesterol for lymphatic tissue targeting was investigated for the intracavitary treatment of cancer. This formulation consists of a blend of the surfactants lecithin and AOT (1 : 3 ratio), an oil phase of isopropyl myristate, and an aqueous component. The phases of the system were defined within a pseudo-ternary phase diagram. At low oil content, this formulation produces a gel-like system over a wide range of H(2) O content. The carboplatin release from the formulation displays a prolonged discharge with a rate three to five times slower than that of the control. Rheological properties of the formulation exhibit pseudoplastic behavior. Microemulsion and Langmuir monolayer studies support the interactions between carboplatin and amphiphilic components used in this formulation. To target delivery of carboplatin, two formulations containing cholesterol were characterized. These two formulations with cholesterol showed that, although cholesterol does little to alter the phases in the pseudo-ternary system or to increase the initial release of the drug, it contributes significantly to the structure of the formulation under physiological temperature, as well as increases the rate of steady-state discharge of carboplatin., (Copyright © 2011 Verlag Helvetica Chimica Acta AG, Zürich.)

The recovery of lysozyme from an aqueous solution containing precipitated lysozyme-AOT complexes formed by the direct addition of sodium bis-(2-ethylhexyl) sulfosuccinate (AOT) to a lysozyme solution was studied using both solvents, and a counterionic surfactant. Ethanol,methanol and solvent mixtures dissolved the surfactant precipitate and recovered lysozyme as a solid. Recovery efficiency and protein stability varied with the type of solvent used. An entirely different method of recovery was also evaluated using a counterionic surfactant: tri-octylmethylammonium chloride (TOMAC) which bound to AOT releasing lysozyme into solution.Complete recovery (100%) of lysozyme was achieved at a molar ratio of 2:1(TOMAC:AOT), and the original protein activity was maintained in the final aqueous phase.The recovered lysozyme retained its secondary structure as observed in circular dichroism(CD) spectra. Specific activity studies show that counterionic surfactant extraction does not alter the biological activity of the enzyme., (© 2011 American Institute of Chemical Engineers)

The interfacial and bulk properties of mixtures of the anionic surfactant (dioctyl sulphosuccinate sodium salt, AOT) with zwitterionic surfactants 3-(N,N-dimethyldodecylammonio) propane sulfonate (DPS), 3-(N,N-dimethyltetradecylammonio) propane sulfonate (TPS), 3-(N,N-dimethylhexadecylammonio) propane sulfonate (HPS) have been studied employing surface tension, fluorescence, and viscometric techniques in aqueous media at 25 °C. It is observed that these mixtures exhibit synergism and these synergistic interactions increase with the enhancement of the hydrocarbon chain of the zwitterionic surfactant. The various physicochemical properties such as critical micelle concentration (cmc), surface excess concentration (Г(max)), minimum area per molecule (A(min)), aggregation number (N(agg)), interaction parameters (β(σ), β(m)), and thermodynamic parameters such as standard Gibbs free energy of adsorption (ΔG(ads)(o)), excess free energy of micellization (ΔG(ex)), and standard Gibbs free energy of micellization (ΔG(m)(o)) have been evaluated. The negative values of ΔG(m)(o) and ΔG(ads)(o) show that the micelle formation and adsorption of surfactant at the air/solution interface is energetically favorable, while a negative value of ΔG(ex) ensures stability of the mixed micelles formed. The Regular Solution Approximation, Motomura and Rosen's approaches have been used to explain and compare the results. The packing parameter (p) ensures the formation of vesicles or bilayers for AOT+DPS/TPS mixtures, which can potentially be used as delivery agents for industrial applications., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Surfactants such as Aerosol OT (AOT) are commonly used to stabilize and electrically charge nonpolar colloids in devices such as electronic ink displays. The electrical behavior of such devices is strongly influenced by the presence of charged inverse micelles, formed by excess surfactant that does not cover the particles. The presence of charged inverse micelles results in increased conductivity of the solution, affecting both the energy consumption of the device and its switching characteristics. In this work, we use transient current measurements to investigate the electrical properties of suspensions of the surfactant Aerosol OT in dodecane. No particles are added, to isolate the effect of excess surfactant. The measured currents upon application of a voltage step are found to be exponentially decaying, and can be described by an analytical model based on an equivalent electric circuit. This behavior is physically interpreted, first by the high generation rate of charged inverse micelles giving the suspension resistor like properties, and second by the buildup of layers of charged inverse micelles at both electrodes, acting as capacitors. The model explains the measurements over a large range of surfactant concentrations, applied voltages, and device thicknesses., (© 2011 American Chemical Society)

The removal of hydrophobic organic pollutants in water to surfactant-coated aluminum hydroxide [surfactant-Al(OH)(3)] was investigated. Anionic surfactants such as sodium dodecyl sulfate (SDS), sodium bis(2-ethylhexyl)sulfosuccinate (AOT), and sodium oleate were sorbed on positively charged aluminum hydroxide at pH 7 and formed hydrophobic aggregates that can incorporate hydrophobic organic pollutants in water. Because of the hydrophobic interaction and decrease in the positive charge, surfactant-Al(OH)(3) was coagulated into precipitates that can readily be separated from water. Hydrophobic organic pollutants such as alkylphenols, polycyclic aromatic hydrocarbons, estrogens, chlorinated antifungals, and pesticides were well collected to the precipitates and thus efficiently removed from water. The collection of hydrophobic organic pollutants was correlated to their aqueous-octanol distribution coefficient. The decomposition of hydrophobic organic pollutants was examined using a bacterial agent (Bacillus subtilis). Hydrophobic organic compounds collected to AOT-Al(OH)(3) or sodium oleate-Al(OH)(3) were insufficiently decomposed. On the other hand, nonylphenol, octylphenol, and pendimethalin collected to SDS-Al(OH)(3) were decomposed within 1 week. The decomposition was accelerated by the collection to SDS-Al(OH)(3)., (© 2010 Elsevier Ltd. All rights reserved.)

The world constructed by self-organization of some amphiphils was discussed on the basis of micelle formation, vesicle formation, and oriented-nano-wire formation. First, the micelle formation of a both water- and oil- soluble surfactant, Aerosol OT, was discussed. Solution states of micelles and monomer were discussed on the basis of thermodinamic and NMR spectroscopic analyses of micelle formation. Next, micelle-vesicle transition was discussed. It was proposed that the phospholipid LUV formation by removing detergents and destruction by adding detergents occurred via 4 stages. The 4 stage model instead of the 3 stage model could not only elucidate the complicated phenomena observed during micelle-vesicle transition, but predicted the size and properties of the vesicles formed by detergent removal from mixed micelles. Next, the vesicle formation of a fatty acid with a single hydrophobic chain different from phospholipid, which has two hydorophobic chains, was discussed. The vesicle formation was strongly affected by the presence of preformed vesicles and the size was biased on the preformed vesicles. It was shown there exist two pass ways in the process of micelle-vesicle transition by pH jump. One is fission of the preformed vesicles after transfer of monomers from newly added oleate micelles and the other is transition from the mixed micelles after partial solubilization by the oreate micelles. Then, the vesicle formation of HCO-10, which has 3 hydrophobic chains, the mixed vesicle formation of phosphatidylethanolamine and lysophosphtidylcholine, which can not form vesicles, and the phospholipid vesicle formation and destruction by removing and adding PEG-lipid, were discussed. Lastly, oriented nano wire formation of mulamyldipeptid-conjugated lipids with ca 5 nm of diameter was discussed.

The polydispersity of the reverse micelles is determined mainly by the fluctuations of their composition. The composition of the reverse micelle is a two-dimensional random variable whose components are the numbers of water (i) and surfactant (j) molecules. In this study the fluctuations of the composition of the reverse micelles are considered in the Gaussian approximation. It is shown that the standard deviation of the quantity w=i/j may be calculated from the dependence of the water vapor pressure above the microemulsion on the molar ratio W=[water]/[surfactant]. The estimation based on the literature data for microemulsion system sodium bis(2-ethylhexyl)sulfosuccinate/water/isooctane at 37°C in the range W=0-18 has shown that the relative standard deviation of the quantity w is about 10%. It is shown that the value of the composition fluctuations is related to the dependence of average composition on the concentration of reverse micelles at constant parameter W., (Copyright © 2010 Elsevier Inc. All rights reserved.)

The amphiphile Aerosol OT (1,4-bis(2-ethylhexyl)sodium sulfosuccinate, AOT) forms, in reverse micellar nanoaggregates of water, RM, in isooctane, ion pairs (IPs) with the cationic fluorescent probe dye, rhodamine 3B, (3,6-bis(ethylamino)-9-[2-(ethoxycarbonyl)phenyl]-9H-xanthen-9-ylium, R3B), as either contact ion pairs, CIPs, or solvent (water) separated ion pairs, SSIPs. The ground-state AOT R3B ion pairs' equilibria as well as the dynamics of R3B electronic excited states show the progressive hydration of AOT(-) R3B(+) toward solvent separated ion pairs, SSIPs as the characteristic reverse micelle parameter w(0) = [H(2)O]/[AOT] increases. The apparent limiting hydration constant of R3B ion pairs, K(hyd) = 2.8 +/- 0.2, corresponds to full hydration of AOT, consistent with 1-3 water molecules per AOT polar head. Transient relaxations at w(0) = 0.2, with a 375 +/- 15 ps decay at 550 nm decrease to 115 +/- 15 ps at w(0) = 7.2 turning into corresponding rises at 588 nm. At higher w(0), water induced dynamics becomes faster. The lifetime is longer in RM with smaller w(0), due to the presence of CIPs that inhibit intrinsic nonradiative decay processes, which in contrast shorten the decay times at higher w(0), due to the presence of SSIPs. The pairs' electronic excited-state properties are sensitive to viscosity and local polarity of the surrounding environment of the interfacial regions of AOT reverse micellar nanoaggregates.

Electrostatic forces are typically produced in low polarity solvents by the addition of surfactants or charge-control additives. Although widely used, there is no consensus on the mechanism by which surfactants control the level of particle charge. We report an investigation using highly sensitive, single particle optical microelectrophoresis measurements combined with a small-angle neutron scattering study to establish the mechanism of charging by the surfactant AOT in the nonpolar solvent n-dodecane. We show that polymer-grafted particles with no chemically bound surface charges only charge above the critical micellar concentration of the surfactant. The surface potential increases gradually with increasing surfactant concentration c, before finally saturating at high c. The increase in the surface potential is correlated to the amount of surfactant adsorbed onto the surface of the particle. Using deuterated AOT and contrast variation techniques, we demonstrate that the surfactant is adsorbed within the polymer layer surrounding the particle core, probably as individual molecules rather than surfactant aggregates. A simple thermodynamic model accounts for the concentration dependence of the observed surface potential.

The UV-vis absorption properties of azo dyes are known to exhibit a variation with the polarity and acidity of the dye environment. The spectral properties of a series of anionic azo dyes were characterized to further probe the interaction of these dyes with two types of surfactant aggregates: (1) the spherical micelles formed in aqueous solution by alkyltrimethylammonium bromide (C(n)TAB) surfactants with n=10-16 and (2) the unilamellar vesicles spontaneously formed in water from binary mixtures of the oppositely-charged double-tailed surfactants cationic didodecyldimethylammonium bromide (DDAB) and anionic sodium dioctylsulfosuccinate (Aerosol OT or AOT). The observed dye spectra reflect the solvatochromic behavior of the dyes and suggest the location and orientation of the dye within the surfactant aggregates. Deconvolution of the overall spectra into sums of Gaussian curves more readily displays any contributions of tautomeric forms of the azo dyes resulting from intramolecular hydrogen bonding. The rich variation in UV/vis absorption properties of these anionic azo dyes supports their use as sensitive tools to explore the nanostructures of surfactant aggregates., (Copyright 2010 Elsevier B.V. All rights reserved.)

Vesicles prepared from surfactant sodium dioctyl sulfosuccinate (AOT) were characterized by micropipet aspiration for determining membrane bending rigidity and area expansion modulus and mechanism of rupture. Unilamellar vesicles (ULV) and multilamellar vesicles (MLV) were studied. The mechanical properties calculated using micropipet aspiration for ULV were found to be 5-10 k(B)T, K(a) = 100 +/- 20 mN/m and for MLV were 8-15 k(B)T, K(a) = 120 +/- 30 mN/m. These properties fall with the range of lipid (PC) membrane measurements (values). However, the membrane rigidity of multilamellar vesicles was found to be approximately 3 times larger than that of unilamellar vesicles. The apparent area expansion moduli of multilamellar vesicles are of the order 1.4 times, sustained far greater areal strain before rupture compared to that of unilamellar vesicles. A dynamic structural change in MLV is demonstrated upon stress by micropipet aspiration. MLV at stress undergoes various stages of deformation. The fluctuation in size and shape of MLV led to separation of bilayers from the stack and decrease in vesicle diameter facilitating in formation of new equilibrium MLV, for it to sustain the specified membrane tension, a new mechanism that is demonstrated experimentally.

The interactions between the anionic surfactant sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and the polycation poly(diallydimethylammonium chloride) (PDDAC), the aggregations of AOT and PDDAC-bound AOT in PDDAC/AOT aqueous solutions, and the influence of salt on the interactions and aggregations have been studied by isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and negative staining transmission electron microscopy (TEM). The adsorptions of AOT onto PDDAC and the formations of PDDAC-bound AOT micelles, free AOT micelles, and AOT vesicles were examined, and the corresponding critical concentrations were determined. Combining calculations of thermodynamic parameters with the above three experimental techniques, it was shown that the micellization of free AOT is driven by entropy gain, while the adsorption of AOT onto PDDAC and the micellization of PDDAC-bound AOT are driven by both enthalpy and entropy. It was also found that addition of salt enhances the binding of AOT onto PDDAC through the ion exchange and favors the formations of PDDAC/AOT micelles, free AOT micelles, and free AOT vesicles but prevents the transition of PDDAC/AOT micelles to the vesicles. Thermodynamic analysis suggested that the adsorption of AOT onto PDDAC and the micellization of PDDAC/AOT in PDDAC/AOT brine solutions are different in mechanism compared with that in corresponding aqueous solutions.

Self-assembly of the anionic surfactant AOT with the protein alpha-lactalbumin in isooctane/brine mixtures results in phase structures whose type, size, and shape differ considerably from those formed by the surfactant alone. Small-angle X-ray scattering was used to determine the size and shape of these structures for 5.4 < pH < 11.2 and 0.25, 0.33, and 0.4 wt % NaCl. All pH values were above the reported isoelectric point for the protein. The composition of the system (except for salt) was fixed, with 2.5 wt % surfactant in equivolume mixtures of oil and water and either 0 or 0.4 wt % protein. Under these conditions, AOT in the absence of protein always formed spherical, water-in-oil (w/o) microemulsion droplets in the organic phase with no self-assembly in the aqueous phase. In the presence of alpha-lactalbumin, self-assembled structures were formed in both aqueous and organic phases, and the size and shape of these was tuned by both pH and [NaCl]. Protein-surfactant interaction was weakest at the most alkaline pH, with protein-free, spherical droplets forming in the organic phase and surfactant-decorated soluble protein clusters forming in the aqueous phase. As pH was decreased, protein increasingly partitioned to the organic phase and droplets became ellipsoidal and much larger in volume, with these effects enhanced at lower salt concentration. Aqueous structures were also strongly affected by pH, shifting from prolate protein/surfactant aggregates at alkaline pH to oil-in-water, oblate microemulsion droplets at neutral pH. At acidic pH and higher salt concentration, self-assembly shifted toward a third, anisotropic aqueous phase, which contained discoid bilayer structures. It is proposed that hydrophobic attraction causes association of the protein with the surfactant monolayer, and pH and [salt] tune the system via the protein by modifying electrostatic repulsion and monolayer curvature.

To determine the relative importance of the confining geometry and nanoscopic length scale versus water/interface interactions, the dynamic interactions between water and interfaces are studied with ultrafast infrared spectroscopy. Aerosol OT (AOT) is a surfactant that can form two-dimensional lamellar structures with known water layer thickness as well as well-defined monodispersed spherical reverse micelles of known water nanopool diameter. Lamellar structures and reverse micelles are compared based on two criteria: surface-to-surface dimensions to study the effect of confining length scales, and water-to-surfactant ratio to study water/interface interactions. We show that the water-to-surfactant ratio is the dominant factor governing the nature of water interacting with an interface, not the characteristic nanoscopic distance. The detailed structure of the interface and the specific interactions between water and the interface also play a critical role in the fraction of water molecules influenced by the surface. A two-component model in which water is separated into bulk-like water in the center of the lamellar structure or reverse micelle and interfacial water is used to quantitatively extract the interfacial dynamics. A greater number of perturbed water molecules are present in the lamellar structures as compared to the reverse micelles due to the larger surface area per AOT molecule and the greater penetration of water molecules past the sulfonate head groups in the lamellar structures.

Polyelectrolyte/surfactant complexes formed between well-defined linear flexible polyelectrolytes, namely, quaternized poly[3,5-bis(dimethylaminomethylene)hydroxystyrene] (Q-N-PHOS), bearing two cationic sites on each repeating unit, and two different anionic surfactants, namely, sodium dodecyl sulfate (SDS) with one hydrocarbon tail and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) with two hydrocarbon chains, are studied by means of fluorescence spectroscopy, electrophoretic, dynamic and static light scattering, and atomic force microscopy. Depending on the surfactant state in initial solutions (i.e., below or above nominal critical micelle concentration, cmc) and final (-/+) charge ratio, self-assembly in nanoparticles of variable size, stability, and effective charge is possible. Spherical, rather polydispserse complexes are formed in all cases. Critical aggregation concentrations (cac) depend on the surfactant type, while hydrophobicity of the main polyelectrolyte chain plays a role in colloidal stability of the complex nanoparticles.

Colloidal silver nanoparticles were synthesized in water-in-oil microemulsion using silver nitrate solubilized in the water core of a microemulsion as source of silver ions, hydrazine hydrate solubilized in the water core of another one as reducing agent, cyclohexane as the continuous phase, and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) as the surfactant. The main factors affecting the formation of silver nanoparticles were systematically studied. Ultraviolet-visible (UV-Vis) spectra were used for analyzing the effects of reaction parameters, including the type of reducing agents, the molar ratio of water to surfactant and the concentration of AgNO3 and AOT and so on, on the formation of silver nanoparticles. Original results for the controllable synthesis of silver nanoparticles were obtained when the synthesis proceeded in AOT-cyclohexane-AgNO3 microemulsion. The UV-Vis spectra of silver sols formed in the microemulsion with various parameters were studied systematically. The results show that the amount and average size of the obtained nanoparticles obviously depend on the above parameters. When the concentration of AgNO3 is lower, smaller silver nanoparticles are easy to form by increasing the concentration of AgNO3 appropriately. The higher W value was found to form larger numbers of silver nanoparticles with larger particle size. Compared to the solubility of NaBH4 in AOT reverse micelles, hydrazine hydrate is well soluble in these micelles, and thus it is favorable to reduce the silver ions solubilized in the water core of AOT-cyclohexane-AgNO3 microemulsion. The increase in the concentration of AOT induces an increase in the number of AOT micelles and a decrease in the molar ratio of water to surfactant. As a result, the solubilization capacity of reactants in the micelles increases and the radii of the micelles decrease. That is to say, with the increase in AOT concentration, the amount of the formed nanoparticles increases and the average size of the particles decreases.