Search

In this study, we evaluated the characteristics of five commercial resin composites used for provisional restorations. The inorganic filler contents of the resins were measured, and three-point bending, wear, surface hardness, water absorption, and staining tests were performed. The specimens underwent additional three-point bending tests after water storage and undergoing thermal stresses at 5°C and 55°C (10,000 cycles). Data were analyzed using one- or two-way analysis of variance and Bonferroni post-hoc tests. Pearson's correlation coefficient was used for pairwise comparisons. Each resin composite presented with different mechanical properties, based on variations in the inorganic filler content. The flexural strength of each resin composite was significantly decreased after water storage. There has a positive correlation between flexural strength and dynamic hardness but a negative correlation between flexural strength and maximum wear depth. The types and contents of the inorganic fillers, the composition of the monomer in the resin matrix, and the addition of plasticizers can affect the properties of the material.

We used a polymicrobial (PM) biofilm model to examine associations of bacterial adhesiveness with surface characteristics of various dental materials. Four types of dental materials (apatite pellet, zirconia, ceramic, and composite resin) with rough and mirror surfaces were used. Surface roughness, surface free energy, zeta potential, and colony-forming units (CFUs) of the biofilm formations were measured. Biofilms were cultured for 24 h under anaerobic conditions, plated onto blood agar medium, and anaerobically cultured for 4 days. After culturing, CFU per mm2 was calculated, and samples were observed under a scanning electron microscope. Means and standard deviations of the experimental data were estimated, and one-way ANOVA and Tukey multiple comparison assays were performed. Pearson correlation coefficients were obtained for the CFU and surface characteristics. Surface roughness and surface free energy appeared to affect generation of PM biofilms on oral materials, and zeta potential was involved in generation of PM biofilms on mirror-ground oral materials.

This study investigated the in vitro anti-demineralization effects of resin-based temporary filling materials containing surface prereacted glass-ionomer (S-PRG) filler on dentin. Bovine root dentin specimens with a 3×3 mm experimental surface were divided into four treatment groups: DuraSeal (DU) as a control, S-PRG filler-free temporary material (S0), material containing 10% (S10) and 20% (S20) S-PRG filler. Each material was applied to 3×2 mm of the experimental surface, and the specimens were immersed in 8% methylcellulose gel demineralization system for one week at 37˚C. Mineral profiles and integrated mineral loss (IML) of lesions induced on the surface (3×1 mm) adjacent to the materials were computed by transversal microradiography. S10 and S20 yielded thick surface layers and shallow lesion bodies, with significantly lower IML than DU and S0 (p

This paper evaluated the wear resistance of resin composite materials with fillers which were modified with a novel hydrophobic silane coupling agent. The novel silane coupling agent containing hydrophobic phenyl group 3-(3-methoxy-4-methacryloyloxyphenyl)propyltrimethoxysilane (p-MBS) was synthesized. The experimental light-cure hybrid composites containing 85wt% of filler modified with this silane were formulated. Twelve specimens were prepared for the three-body-wear test with the ACTA machine and the collected data were analyzed statistically using a one-way ANOVA and Tukey's multiple comparison test as the post hoc test. The wear of the composites containing fillers treated with p-MBS was significantly lower compared with the composite materials containing fillers pretreated with 3-methacryloyloxypropyltrimethoxysilane or the commercially composites (AP-X and ELS extra low shrinkage) after a wear test for 200,000 cycles (p

Three novel aqueous fluoride surfactants (F4, F6, and F8) and a positive control (10F2S-3I) were applied to bovine enamel and the surface free energy was calculated by measuring the surface contact angles of three liquids: distilled water, α-bromonaphthalene and diiodomethane. The specimens were stored in water for 90 days, and then immersed in acetic acid/sodium acetate. The modified specimens recorded higher contact angles and lower surface free energy immediately after treatment than the control (p

Six silane coupling agents having amide group (biosilanes) were synthesized with the aim to construct the material surface that allows cells to be compatible with it without their destruction. These agents were expected to make a soft landing to cytoplasm through the hydrogen bonding between their amide groups and cells. Evaluations of cell affinity using glass substrates modified with the synthesized biosilanes revealed that many cells remain on the modified glass plate. In addition, the implantation into the body of immunodeficient mouse of a composite material composed of porous hydroxyapatite and osteoblast showed the formation of a bone-like structure.