Search

Silver nanoparticles (AgNPs) are extensively used as an antibacterial agent, and monitoring the dissolution behavior of AgNPs in native biological environments is critical in both optimizing their performance and regulating their safety. However, current assessment methods rely on sophisticated analytical tools that are off-site and time-consuming with potential underestimations, due to complicated sample preparation. Although localized surface plasmon resonance (LSPR) sensing offers a facile method for the detection of AgNP dissolution, it is limited by low sensitivity and poor nanoparticle stability in native biological environments. Herein, we constructed a highly sensitive and stable LSPR sensor using gold-silver core-shell nanoparticles (Au@AgNPs), in combination with polymeric stabilizing agents, for the direct measurement of the Ag shell dissolution in native biological media. The high sensitivity was attributed to the acute and large LSPR shift generated by bimetallic nanoparticles. The sensor was used for the real-time monitoring of the Ag dissolution of Au@AgNPs during their co-culture with both bacteria and fibroblast cells. The media pH was found to dominate the Ag dissolution process, where Au@AgNPs exhibited bactericidal effects in the bacteria environment with relatively low pH, but they showed little toxicity towards fibroblast cells at pH 7.4. The minimum inhibition concentration of Au@AgNPs for bacterial growth was found similar to that of AgNO 3 in terms of released Ag amount. Thus, stabilized Au@AgNPs not only allow the in-situ monitoring of Ag dissolution via LSPR sensing but also constitute an effective antibacterial agent with controlled toxicity, holding great potential for future biomedical and healthcare applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Highly sensitive and reliable detection of β-adrenergic agonists is especially necessary due to the illegal abuse of growth-promoting feed additives. Here, we develop a novel surface plasmon resonance/surface-enhanced Raman scattering (SPR/SERS) dual-mode plasmonic sensor based on core-satellite nanoassemblies for the highly sensitive and reliable detection of ractopamine (RAC). The addition of RAC results in the decomposition of core-satellite nanoassemblies and consequently changes the Rayleigh scattering color of dark-field microscopy (DFM) images and the Raman scattering intensity of SERS spectra. The excellent sensitivity, specificity, and uniformity of this strategy were confirmed by detecting RAC in various complex media in the farm-to-table chain, and the limit of detection (LOD) was 0.03 ng/mL in an aqueous solution. In particular, the convenient access to livestock sewage not only ensures animal welfare but also provides great convenience for the market regulation of β-agonists. The success of our on-site strategy only with a portable Raman device promises great application prospects for β-agonist detection.

This study describes the synthesis of silver nanoparticles (AgNPs) using shortleaf spikesedge extract (SSE) to reduce AgNO 3 . Visual observation, in addition to analyses of UV-vis, EDX, XRD, FTIR, and TEM was employed to monitor the formation of AgNPs. The effects of SSE concentration, AgNO 3 concentration, reaction time, pH, and temperature on the synthesis of AgNPs were studied based on the surface plasmon resonance (SPR) band. From the TEM image, highly-scattered AgNPs of quasi-spherical shape with an average particle size of 17.64 nm, were observed. For the catalytic study, the reduction of methylene blue (MB) was evaluated using two systems. A detailed batch study of the removal efficiency (%RE) and kinetics was done at an ambient temperature, various MB initial concentrations, and varying reaction time. Employing the electron relay effect in System 2, the batch study clearly highlighted the significant role of AgNPs in boosting the catalytic activity for MB removal. At 30-100 mg/L initial concentrations, MB was reduced by 100% in a very short reaction time between 1.5 and 5.0 mins. The kinetic data best fitted the pseudo-first-order model with a maximum reaction rate of 2.5715 min -1 . These findings suggest the promising application of AgNPs in dye wastewater treatment.The SSE-driven AgNPs were prepared using unwanted dried biomass of shortleaf spikesedge extract (SSE) as a reducing as well as stabilizing agent. Employing the electron relay effect, the batch study clearly highlighted the significant role of SSE-driven AgNPs in boosting the catalytic activity for MB removal. At 30-100 mg/L initial concentrations, MB was reduced by 100% in a very short reaction time between 1.5 and 5.0 mins. In this sense, SSE-driven AgNPs acted as an electron relay point that behaves alternatively as acceptor and donor of electrons. The findings revealed the good catalytic performance of SSE-driven AgNPS, proving their viability for dye wastewater treatment.

This study introduces localized surface plasmon resonance (L-SPR) mediated heating filter membrane (HFM) for inactivating universal viral particles by using the photothermal effect of plasmonic metal nanoparticles (NPs). Plasmonic metal NPs were coated onto filter membrane via a conventional spray-coating method. The surface temperature of the HFM could be controlled to approximately 40-60 °C at room temperature, owing to the photothermal effect of the gold (Au) NPs coated on them, under irradiation by visible light-emitting diodes. Due to the photothermal effect of the HFMs, the virus titer of H1Npdm09 was reduced by > 99.9%, the full inactivation time being < 10 min, confirming the 50% tissue culture infective dose (TCID 50 ) assay. Crystal violet staining showed that the infectious samples with photothermal inactivation lost their infectivity against Mardin-Darby Canine Kidney cells. Moreover, photothermal inactivation could also be applied to reduce the infectivity of SARS-CoV-2, showing reduction rate of 99%. We used quantitative reverse transcription polymerase chain reaction (qRT-PCR) techniques to confirm the existence of viral genes on the surface of the HFM. The results of the TCID 50 assay, crystal violet staining method, and qRT-PCR showed that the effective and immediate reduction in viral infectivity possibly originated from the denaturation or deformation of membrane proteins and components. This study provides a new, simple, and effective method to inactivate viral infectivity, leading to its potential application in various fields of indoor air quality control and medical science., (© 2022. The Author(s).)

Bimetal nanochains (NCs) are attracting increasing attention in the fields of catalysis and electrocatalysis due to the synergistic effects in electronic and optical properties, but the fabrication of bimetal NCs remains challenging. Here, we report a general strategy named "nucleation in the irradiation then growth in the dark" for the preparation of Au/M (second metal) NCs. In the irradiation stage, the localized surface plasmon resonance (LSPR) effect of Au NPs is excited to overcome the nucleation energy barrier for the deposition of second metals (Pt, Ag and Pd). In the followed dark process, the preferential growth of second metals on the existed nucleus leads to the formation of nanochain rather than the core/shell nanostructure. In the model reaction of electrocatalytic hydrogen evolution, the optimized Au/Pt NCs showed much better performance compared with the commercial Pt/C., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Exploration of optoelectronic memristors with the capability to combine sensing and processing functions is required to promote development of efficient neuromorphic vision. In this work, the authors develop a plasmonic optoelectronic memristor that relies on the effects of localized surface plasmon resonance (LSPR) and optical excitation in an Ag-TiO 2 nanocomposite film. Fully light-induced synaptic plasticity (e.g., potentiation and depression) under visible and ultraviolet light stimulations is demonstrated, which enables the functional combination of visual sensing and low-level image pre-processing (including contrast enhancement and noise reduction) in a single device. Furthermore, the light-gated and electrically-driven synaptic plasticity can be performed in the same device, in which the spike-timing-dependent plasticity (STDP) learning functions can be reversibly modulated by visible and ultraviolet light illuminations. Thereby, the high-level image processing function, i.e., image recognition, can also be performed in this memristor, whose recognition rate and accuracy are obviously enhanced as a result of image pre-processing and light-gated STDP enhancement. Experimental analysis shows that the memristive switching mechanism under optical stimulation can be attributed to the oxidation/reduction of Ag nanoparticles due to the effects of LSPR and optical excitation. The authors' work proposes a new type of plasmonic optoelectronic memristor with fully light-modulated capability that may promote the future development of efficient neuromorphic vision., (© 2021 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Single-base mutations of Factor V Leiden G1691A and Prothrombin gene G20210A are the main genetic risk factors for inherited thrombotic tendency. The establishment for rapid and efficient detection method is of great significance to the prevention of venous thrombosis. In this work, a multiplexed, highly sensitive and regenerable surface plasmon resonance imaging (SPRi) sensor is described to identify and detect the two pathogenic genes by fixing probes in one-step. The probes are fixed by ployA, which is a simpler, faster and lower cost modification method compared with traditional thiol (-SH). PolyA-DNA-AuNPs is used to amplify the signal to improve sensitivity. The detection limit of the sensor is 8 pM, and it has a wide dynamic range between 8 pM and 100 nM and a good linear relationship between 8 pM to 50 pM. The equilibrium dissociation constant (KD) of 3.0 (± 0.3) pM indicates a high binding capacity. Based on the advantages of high-throughput detection, the SPRi chip can simultaneously identify and detect two genes related to thrombotic Diseases. In addition, more than 90% signal intensity can still be obtained on the surface of the chip after being regenerated of 25 times, indicating that this SPRi sensor has good stability and reproducibility. The established SPRi sensor has the advantages of high-throughput, high-sensitivity, label-free and no need for amplification, which is expected to become an effective technical means for real-time online detection of gene point mutations, and can be extended to detect and quantify a wider range of DNA mutation diseases., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Localized surface plasmon resonance (LSPR) associated with metal nanostructures has developed into highly useful sensor techniques. LSPR spectroscopy often shows absorption peaks which could be used for biomedical detection. Here we report nanoplasmonic sensors using LSPR on nanostructures such as nanoparticles, nanocups, and nanocones to recognize biomolecular. These sensors can be modified for quantitative detection of explosives and evaluation of enzymatic activity. Electrochemical LSPR sensors can also be designed by coupling electrochemistry and LSPR spectroscopy measurements for biochemical detection. Multiple sensing information can be obtained and electrochemical LSPR property can be investigated for biosensors. In some applications, the electrochemical LSPR biosensor can be used to quantify heavy metal ions, neurotransmitters, and sialic acid. The biosensors exhibit better performance than those of conventional optical LSPR measurements. With multitransducers, the nanoplasmonic biosensor can provide a promising approach for biochemical detection in environmental monitoring, healthcare diagnostics, and food quality control., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

Surface enhanced infrared absorption spectroscopic studies (SEIRAS) as a technique to study biological molecules in extremely low concentrations is greatly evolving. In order to use the technique for identification of the structure and interactions of such biological molecules, it is necessary to identify the effects of the plasmonic electric-field enhancement on the spectral signature. In this study the spectral properties of 1,2-Dipalmitoyl-sn-glycero-3 phosphothioethanol (DPPTE) phospholipid immobilized on gold nanoantennas, specifically designed to enhance the vibrational fingerprints of lipid molecules were studied. An AFM study demonstrates an organization of the DPPTE phospholipid in bilayers on the nanoantenna structure. The spectral data were compared to SEIRAS active gold surfaces based on nanoparticles, plain gold and plain substrate (Si) for different temperatures. The shape of the infrared signals, the peak positions and their relative intensities were found to be sensitive to the type of surface and the presence of an enhancement. The strongest shifts in position and intensity were seen for the nanoantennas, and a smaller effect was seen for the DPPTE immobilized on gold nanoparticles. This information is crucial for interpretation of data obtained for biological molecules measured on such structures, for future application in nanodevices for biologically or medically relevant samples.

The purpose of this work is to propose a simple, portable, and sensitive biosensor structure based on singlemode fiber-multicore fiber-multimode fiber-singlemode fiber (SMF-MCF-MMF-SMF) for the detection of creatinine in the human body. Chemical etching has been used to modify the diameter of the sensing probe to approximately 90 μm in order to generate strong evanescent waves (EWs). The sensor probe is functionalized with graphene oxide (GO), gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS 2 -NPs), and creatininase (CA) enzyme. The concentration of creatinine is determined using fiber optic localized surface plasmon resonance (LSPR). While EWs are used to enhance the LSPR effect of AuNPs, two-dimensional (2D) materials (GO and MoS 2 -NPs) are used to increase biocompatibility, and CA is used to increase probe specificity. Additionally, HR-TEM and UV-visible spectroscopy are used to characterize and measure the nanoparticle (NP) morphology and absorption spectrum, respectively. SEM is used to characterize the NPs immobilized on the surface of the fiber probe. The sensor probe's reusability, reproducibility, stability, selectivity, and pH test results are also tested to verify the sensor performance. The sensitivity of proposed sensor is 0.0025 nm/μM, has a standard deviation of 0.107, and has a limit of detection of 128.4 μM over a linear detection range of 0 - 2000 μM.

Ensuring consistently high quality and safety is paramount to food producers and consumers alike. Wet chemistry and microbiological methods provide accurate results, but those methods are not conducive to rapid, onsite testing needs. Hence, many efforts have focused on rapid testing for food quality and safety, including the development of various biosensors. Herein, we focus on a group of biosensors, which provide visually recognizable colorimetric signals within minutes and can be used onsite. Although there are different ways to achieve visual color-change signals, we restrict our focus on sensors that exploit the localized surface plasmon resonance (LSPR) phenomenon of metal nanoparticles, primarily gold and silver nanoparticles. The typical approach in the design of LSPR biosensors is to conjugate biorecognition ligands on the surface of metal nanoparticles and allow the ligands to specifically recognize and bind the target analyte. This ligand-target binding reaction leads to a change in color of the test sample and a concomitant shift in the ultraviolet-visual absorption peak. Various designs applying this and other signal generation schemes are reviewed with an emphasis on those applied for evaluating factors that compromise the quality and safety of food and agricultural products. The LSPR-based colorimetric biosensing platform is a promising technology for enhancing food quality and safety. Aided by the advances in nanotechnology, this sensing technique lends itself easily for further development on field-deployable platforms such as smartphones for onsite and end-user applications., (© 2021 Institute of Food Technologists®.)

This paper describes, for the first time to our knowledge, a fast-response and specific biosensor for detection of Taenia solium , a parasite responsible for neurocysticercosis disease that affects the central nervous system. The biosensor is based on the localized surface plasmon resonance (LSPR) technique on gold nanoparticles (AuNPs) in colloidal suspension that were functionalized and activated with antibodies to perform an immuno-capture effect. The AuNPs were synthetized by Turkevich and seed-mediated growth methods. A variety of concentrations of T. solium antigen were added to test the detection and the dose-response profile. Small antigen concentrations were detected indicating that the limit of detection is lower than 0.1 µg/mL of antigen. The results demonstrate the potential of the AuNPs LSPR biosensor as a clinical tool for neurocysticercosis diagnostic.

Colorimetric sensors based on localized surface plasmon resonance (LSPR) have attracted much attention for biosensor and chemical sensor applications. The unique optical effect of LSPR is based on the nanostructure of noble metals (e.g., Au, Ag, and Al) and the refractive index of the environment surrounding these metal nanomaterials. When either the structure or the environment of these nanomaterials is changed, their optical properties change and can be observed by spectroscopic techniques or the naked eye. Colorimetric-probe-based LSPR provides a simple, rapid, real-time, nonlabelled, sensitive biochemical detection and can be used for point-of-care testing as well as rapid screening for the diagnosis of various diseases. Gold and silver nanoparticles, which are the two most widely used plasmonic nanomaterials, demonstrate strong and sensitive LSPR signals that can be used for the selective detection of several chemicals in biochemical compounds provided by the human body (e.g., urine and blood). This information can be used for the diagnosis of several human health conditions. This paper provides information regarding colorimetric probes based on LSPR for the detection of three major chemicals in human urine: creatinine, albumin, and glucose. In addition, the mechanisms of selective detection and quantitative analysis of these chemicals using metal nanoparticles are discussed along with colorimetric-detection-based LSPR for many other specific chemicals that can be detected in urine, such as catecholamine neurotransmitters, thymine, and various medicines. Furthermore, issues regarding the use of portable platforms for health monitoring with colorimetric detection based on LSPR are discussed.

This research presents an electrochemical immunosensor for collagen I detection using a self-assembled monolayer (SAM) of gold nanoparticles (AuNPs) and covalently immobilized half-reduced monoclonal antibody as a receptor; this allowed for the validation of the collagen I concentration through two different independent methods: electrochemically by Electrochemical Impedance Spectroscopy (EIS), and optically by Surface Plasmon Resonance (SPR). The high unique advantage of the proposed sensor is based on the performance of the stable covalent immobilization of the AuNPs and enzymatically reduced half-IgG collagen I antibodies, which ensured their appropriate orientation onto the sensor's surface, good stability, and sensitivity properties. The detection of collagen type I was performed in a concentration range from 1 to 5 pg/mL. Moreover, SPR was utilized to confirm the immobilization of the monoclonal half-antibodies and sensing of collagen I versus time. Furthermore, EIS experiments revealed a limit of detection (LOD) of 0.38 pg/mL. The selectivity of the performed immunosensor was confirmed by negligible responses for BSA. The performed approach of the immunosensor is a novel, innovative attempt that enables the detection of collagen I with very high sensitivity in the range of pg/mL, which is significantly lower than the commonly used enzyme-linked immunosorbent assay (ELISA).

Gold nanoparticles (AuNPs) represent a relatively simple nanosystem to be synthesised and functionalized. AuNPs offer numerous advantages over different nanomaterials, primarily due to highly optimized protocols for their production with sizes in the range 1-150 nm and shapes, spherical, nanorods (AuNRs), nanocages, nanostars or nanoshells (AuNSs), just to name a few. AuNPs possess unique properties both from the optical and chemical point of view. AuNPs can absorb and scatter light with remarkable efficiency. Their outstanding interaction with light is due to the conduction electrons on the metal surface undergoing a collective oscillation when they are excited by light at specific wavelengths. This oscillation, known as a localized surface plasmon resonance, causes the absorption and scattering intensities of AuNPs to be significantly higher than identically sized non-plasmonic nanoparticles. In addition, AuNP absorption and scattering properties can be tuned by controlling the particle size, shape, and the local refractive index near the particle surface. By the chemical side, AuNPs offer the advantage of functionalization with therapeutic agents through covalent and ionic binding, which can be useful for biomedical applications, with particular emphasis on cancer treatments. Functionalized AuNPs exhibit good biocompatibility and controllable distribution patterns when delivered in cells and tissues, which make them particularly fine candidates for the basis of innovative therapies. Currently, major available AuNP-based cancer therapeutic approaches are the photothermal therapy (PTT) or photodynamic therapy (PDT). PTT and PDT rely upon irradiation of surface plasmon resonant AuNPs (previously delivered in cancer cells) by light, in particular, in the near-infrared range. Under irradiation, AuNPs surface electrons are excited and resonate intensely, and fast conversion of light into heat takes place in about 1 ps. The cancer cells are destroyed by the induced hyperthermia, i.e. the condition under which cells are subject to temperature in the range of 41 °C-47 °C for tens of minutes. The review is focused on the description of the optical and thermal properties of AuNPs that underlie their continuous and progressive exploitation for diagnosis and cancer therapy.

The use of nanoparticle-based colorimetric methods has received considerable attention in a broad range of clinical and biomedical applications due to their high sensitivity, low cost, extreme simplicity and excellent analytical performance. However, the formation of a protein corona has severely limited the application of nanoparticles (NPs) in clinical samples, which can confer colloidal stability to serum-exposed nanoparticles compared to pristine particles. To address this challenge, dialysis, ultrafiltration and phenol : chloroform : isopentanol extraction methods were compared aiming at facile and routine protein separation methods to eliminate the formation of protein corona on NPs and the development of a sensitive and simple therapeutic drug monitoring (TDM) assay for the detection of aminoglycoside antibiotics in serum. Based on the comparison of the sensitivity of the localized surface plasmon resonance (LSPR) aggregation assay in pure water, untreated serum and serum after the different sample preparation methods, we revealed by Coomassie blue staining that proteins in the serum were the predominant interfering molecules to degrade the sensitivity of serum-based aggregation assays. Using dialysis, naked eye semi-quantification was achieved at the clinical level for amikacin, tobramycin and streptomycin. The dialysis efficiency and dialysis coefficient of amikacin were also measured to prove the efficacy of dialysis as a fast and efficient protein-removal method. This strategy is expected to be applicable universally as a pretreatment for the assay of small molecules with plasmonic assays in crude biological samples.

Following the previous chapter, recent synthetic methods of metal-based nanoparticles and their applications based on plasmonic resonance properties are described in this chapter. This differs from the previous chapter, which described the general uses of metal-based nanoparticles, in that various recent advanced applications of metal-based nanoparticles are described in this chapter.

Biomolecule sensing plays an important role in both fundamental biological studies and medical diagnostic applications. Infrared (IR) spectroscopy presents opportunities for sensing biomolecules as it allows their fingerprints to be determined by directly measuring their absorption spectra. However, the detection of biomolecules at low concentrations is difficult with conventional IR spectroscopy due to signal-to-noise considerations. This has led to recent interest on the use of nanostructured surfaces to boost the signals from biomolecules in a method termed surface enhanced infrared spectroscopy. So far, efforts have largely involved the use of metallic nanoantennas (which produce large field enhancement) or graphene nanostructures (which produce strong field confinement and provide electrical tunability). Here, we propose a nanostructured surface that combines the large field enhancement of metallic nanoantennas with the strong field confinement and electrical tunability of graphene plasmons. Our device consists of an array of plasmonic nanoantennas and graphene nanoslits on a resonant substrate. We perform systematic electromagnetic simulations to quantify the sensing performance of the proposed device and show that it outperforms designs in which only plasmons from metallic nanoantennas or plasmons from graphene are utilized. These investigations consider the model system of a representative protein-goat anti-mouse immunoglobulin G (IgG) - in monolayer or sub-monolayer form. Our findings provide guidance for future biosensors for the sensitive quantification and identification of biomolecules.

Shiga toxin-producing Escherichia coli (STEC) are responsible for gastrointestinal diseases reported in numerous outbreaks around the world as well as in the United States. Current detection methods have limitation to implement for rapid field-deployable detection with high volume of samples that are needed for regulatory purposes. Surface plasmon resonance imaging (SPRi) has proved to achieve rapid and label-free screening of multiple pathogens simultaneously, so it was evaluated in this work for the detection of Shiga toxins (Stx1a and Stx2a toxoids were used as the less toxic alternatives to Stx1 and Stx2, respectively). Multiple antibodies (Stx1pAb, Stx1-1mAb, Stx1-2mAb, Stx1d-3mAb, Stx1e-4mAb, Stx2pAb, Stx2-1mAb, Stx2-2mAb, and Stx2-10mAb) were spotted one by one by programed microarrayer, on the same high-throughput biochip with 50-nm gold film through multiple crosslinking and blocking steps to improve the orientation of antibodies on the biochip surface. Shiga toxins were detected based on the SPRi signal difference (ΔR) between immobilized testing antibodies and immunoglobulin G (IgG) control. Among the antibodies tested, Stx1pAb showed the highest sensitivity for Stx1 toxoid, with the limit of detection (LOD) of 50 ng/mL and detection time of 20 min. Both Stx2-1mAb and Stx2-2mAb exhibited high sensitivity for Stx2 toxoid. Furthermore, gold nanoparticles (GNPs) were used to amplify the SPRi signals of monoclonal antibodies in a sandwich platform. The LOD reached the level of picogram (pg)/mL with the help of GNP-antibody conjugate. This result proved that SPRi biochip with selected antibodies has the potential for rapid, high-throughput and multiplex detection of Shiga toxins.

Nanoparticles have been used as signal transducers for optical readouts in biosensors. Optical approaches are cost-effective with easy readout formats for clinical diagnosis. We present a glucose biosensor based on the biocatalytic shape-altering of gold nanostars via silver deposition. Improved sensitivity was observed due to the nanostars clustering after being functionalised with glucose oxidase (GOx). The biosensor quantified glucose in the serum samples with a 1:1000 dilution factor, and colorimetrically distinguished between the concentrations. The assay demonstrated good specificity and sensitivity. The fabricated glucose biosensor is a rapid kinetic assay using a basic entry level laboratory spectrophotometric microplate reader. Such a biosensor could be very useful in resource-constrained regions without state-of-the-art laboratory equipment. Furthermore, naked eye detection of glucose makes this a suitable biosensor for technology transfer to other point-of-care devices., Competing Interests: The authors declare no conflict of interest.

Current techniques for plant virus detection, such as RT- PCR and ELISA, require multistep procedures and rely on sophisticated equipment. Due to the global spread of plant viruses, the development of simpler, faster and cheaper assay methods is inevitable. Gold nanoparticles (AuNPs) had raised much interest during recent years due to their novel optical properties or diagnostic purposes. The localized surface plasmon resonance (LSPR 1 ) of AuNPs had been used in the development of novel colorimetric nano-biosensing systems. The frequency and intensity of the LSPR peak generally depend on the shape, size and the surrounding medium of the AuNPs. In this study, unmodified AuNPs had been used to detect the unamplified Tomato yellow leaf curl virus (TYLCV) genome in infected plants. A specific DNA probe complementary to the coat protein region of virus genome was designed. The extracted total DNA of uninfected and infected plants was mixed with hybridization buffer and the designed probe. The mixture was denatured, annealed and then cooled to room temperature and was followed by AuNPs addition. The color changes in the samples indicating the presence of target virus infections were assessed visually after the addition of salt and confirmed by UV-Vis spectroscopy. The results showed that this strategy allowed for fast and sensitive detection of TYLCV genome and eliminated the need for PCR amplification and detection equipment., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A rapid method is described for the determination of the antibiotic kanamycin. It integrates a kanamycin-binding aptamer and surface plasmon enhanced energy transfer (SPEET) between DNA-templated silver nanoclusters (AgNCs) and gold nanoparticles (AuNPs). The AgNCs and AuNPs were selected as energy donor and energy acceptor, respectively. The aptamer was designed to regulate the energy transfer between AgNCs and AuNPs. The aptamer was adsorbed on the AuNPs. Upon addition of kanamycin, the aptamer-kanamycin complex is formed, and this results in the aggregation of the AuNPs in high salt concentration, the formation of a blue coloration, and in the suppression of the SPEET process. The fluorescence of the AgNCs (with excitation/emission peaks at 560/600 nm) is quenched by the aptamer protected AuNPs in absence of kanamycin. The fluorescence on addition of kanamycin increases linearly in the 5 to 50 nM concentration range, with a lower detection limit of 1.0 nM (at S/N = 3). The assay can be performed within 30 min. It was successfully applied to the determination of kanamycin in spiked milk samples, and recoveries ranged between 90.2 and 95.4%. Conceivably, the strategy has a wide potential for screening by simply changing the aptamer. Graphical abstract Schematic presentation of the aptamer regulated surface plasmon enhance energy transfer (SPEET) between silver nanoclusters (Ag NCs) and gold nanoparticles (Au NCs) in high salt concentration buffer, and of the procedure for the detection of kanamycin.

The clinical assessment of short-stranded nucleic acid biomarkers such as miRNAs could potentially provide useful information for monitoring disease progression, prompting definitive treatment decisions. In the past decade, advancements in biosensing technology have led to a shift towards rapid, real-time and label-free detection systems; as such, surface plasmon resonance (SPR) biosensor-based technology has become of high interest. Here, we developed an automated multiplex transmissive surface plasmon resonance (t-SPR) platform with the use of a capped gold nanoslit integrated microfluidic surface plasmon resonance (SPR) biosensor. The automated platform was custom designed to allow the analysis of spectral measurements using wavelength shift (dλ), intensity (dI) and novel area change (dA) for surface binding reactions. A simple and compact nanostructure based biosensor was fabricated with multiplex real-time detection capabilities. The sensitivity and specificity of the microfluidic device was demonstrated through the use of functionalised AuNPs for target molecule isolation and signal enhancement in combination with probes on the CG nanoslit surface. Our work allows for the multiplex detection of miRNA at femtomolar concentrations in complex media such as urine.

The precise positioning of plasmonic nanoscale objects and organic molecules can significantly boost our ability to fabricate hybrid nanoarchitectures with specific target functionalities. In this work, we used a DNA origami structure to precisely localize three different fluorescent dyes close to the tips of hollow gold nanotriangles. A spectral dependence of plasmon-enhanced fluorescence is evidenced through co-localized AFM and fluorescence measurements. The experimental results match well with explanatory FDTD simulations. Our findings open the way to the bottom-up fabrication of plasmonic routers operating through plasmon energy transfer. They will allow one to actively control the direction of light propagation.

Herein, a dual channel surface plasmon resonance imaging (SPRi) biosensor has been developed for the simultaneous and highly sensitive detection of multiplex miRNAs based on strand displacement amplification (SDA) and DNA-functionalized AuNP signal enhancement. In the presence of target miRNAs (miR-21 or miR-192), the miRNAs could specifically hybridize with the corresponding hairpin probes (H) and initiate the SDA, resulting in massive triggers. Subsequently, the two parts of the released triggers could hybridize with capture probes (CP) and DNA-functionalized AuNPs, assembling DNA sandwiches with great mass on the chip surface. A significantly amplified SPR signal readout was achieved. This established biosensing method was capable of simultaneously detecting multiplex miRNAs with a limit of detection down to 0.15 pM for miR-21 and 0.22 pM for miR-192. This method exhibited good specificity and acceptable reproducibility. Moreover, the developed method was applied to the determination of target miRNAs in a complex matrix. Thus, this developed SPRi biosensing method may present a potential alternative tool for miRNA detection in biomedical research and clinical diagnosis.

Background: Type 1 cardiorenal syndrome (CRS) is a severe complication for acute decompensated heart failure patients. This study aimed at evaluating the feasibility of using the gold nanoparticle-based localized surface plasmon-coupled fluorescence biosensor (LSPCFB) to detect urine cofilin-1 as a biomarker for predicting CRS among patients in the coronary care unit (CCU)., Methods: A total of 44 patients were included with prospectively collected urine and blood samples. Both LSPCFB and conventional enzyme-linked immunosorbent assays (ELISAs) were used to measure urine cofilin-1 at admission to the CCU. The occurrence of CRS was judged within 7 days after admission. The discrimination presented as the area under the receiver operating characteristic curve (AUROC) and calibration of both detection methods were used to assess the predictive ability of urine cofilin-1 measured by the LSPCFB and ELISA., Results: Thirteen patients were diagnosed with CRS, while the other 31 patients were classified into a non-CRS group. For predicting CRS by measuring urine cofilin-1, the LSPCFB had higher accuracy (AUROC: 0.707, p = 0.031; overall accuracy: 79.55%) than the ELISA (AUROC: 0.479, p = 0.827; overall accuracy: 53.27%). The positive and negative predictive values of the LSPCFB were also higher than those of the ELISA (positive predictive value: 70.0 vs. 34.8%; negative predictive value: 82.4 vs. 76.2%)., Conclusions: The gold nanoparticle-based immunoassay LSPCFB could exploit the potential of urine cofilin-1 as a single biomarker to predict CRS among CCU patients., (© 2018 S. Karger AG, Basel.)

The development of sensing systems for the measurement of small molecules is an active area of research. A sensor based approach for the measurement of metabolites can potentially provide the simplicity and portability required for widespread use. Rapid detection and quantitation of small-molecule metabolites can potentially emerge as an effective way to link the metabolite profile to the disease state. Surface plasmon resonance (SPR) combined with molecular recognition elements to deliver high specificity is a sensing platform that has been widely applied for a large range of biomolecules. However, direct detection of small molecules with SPR challenges the refractive index based detection mechanism. The work described here combines a periplasmic binding protein for recognition with target modified gold nanoparticles (AuNPs) in a competitive assay format for folic acid (FA) detection. Specifically, a SPR imaging substrate containing immobilized folate binding protein (FBP) is used to measure the adsorption of FA conjugated AuNPs. The immobilization of the FBP and the binding of the FA conjugated AuNPs are characterized and optimized. It is shown that free FA in solution can be quantitatively measured by competition for the surface binding sites with the functionalized AuNPs. We demonstrate that the dynamic range can be lowered from micromolar to nanomolar by simply decreasing the concentration of FA conjugated AuNPs, thus lowering the limit of detection to 2.9 nM. This type of competitive assay can be applied to a range of small molecules, which paves the way for future multiplexed analysis of metabolites using SPR.

A high sensitive surface plasmon resonance (SPR) biosensor was proposed based on the gold nanoparticles-decorated molybdenum sulfide (AuNPs-MoS 2 ) for the first time. This SPR platform using the AuNPs-MoS 2 nanocomposites as signal labels for the sensitive and facile measurement of microRNA (miRNA) was executed in only two steps. At first, the thiol-modified DNA oligonucleotide probes, including a sequence complementary to the target miRNA-141, were fixed on the Au film to identify the segment sequence of target miRNA-141. Then, the assistant DNA-linked AuNPs-MoS 2 nanocomposites were used to combine with the other section of the miRNA-141. Performance of SPR biosensor was enhanced by taking advantage of the AuNPs-MoS 2 nanocomposites, thus this newly presented sensing assay exhibited high sensitivity toward miRNA with a detection limit of 0.5 fM. Furthermore, the method showed high specificity, resulting in distinguishing differences among miRNA-200 family members. Especially, the assay could also be used to detect human miRNA from cancer cells, and the results were in excellent accord with the ones obtained using qRT-PCR. What is more, this presented method could be feasible for determining miRNA in 10% human serum. This assay may provide a great potential as a miRNA quantification method in complex samples, and exert significant effect on biomedical research and clinical early diagnosis., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Plasmonic gold bipyramids (AuBPs) with sharp tips are promising orientation probes in biological studies because of their anisotropic shape, strong electric field enhancement at the tips, and convenient manipulation into other shapes. Herein, we elucidate the optical properties of single AuBPs at their localized surface plasmon resonance (LSPR) wavelengths using dark-field (DF) microscopy and differential interference contrast (DIC) microscopy and test their use as orientation probes in a dynamic biological environment. Characteristic scattering field distributions together with a simulation study allowed us to achieve the high-throughput determination of the 3D orientation of single AuBPs within a single frame using defocused DF microscopy. We further present the polarization-dependent, periodic DIC images and intensities of single AuBPs at their LSPR wavelengths with high sensitivity. Finally, we successfully tracked the real-time rotational motions of transferrin-modified AuBPs on live cell membranes using DIC microscopy. Therefore, these results support the use of single AuBPs as sensitive orientation probes in dynamic biological studies using DIC microscopy.

Acute myocardial infarction (heart attack) is the fifth leading cause of death in the United States (Dariush et al., Circulation, 2015, 131, e29-e322). This highlights the need for early, rapid, and sensitive detection of its occurrence and severity through assaying cardiac biomarkers in human fluids. Herein we report chip-based fabrication of the first label-free, nanoplasmonic biosensor to assay cardiac troponin T (cTnT) in human biofluids (plasma, serum, and urine) with high specificity. The sensing mechanism is based on the adsorption model that measures the localized surface plasmon resonance (LSPR) wavelength shift of anti-cTnT functionalized gold triangular nanoprisms (Au TNPs) induced by a change of their local dielectric environment upon binding of cTnT. We demonstrate that controlled manipulation of the sensing volume and decay length of Au TNPs together with an appropriate surface functionalization and immobilization of anti-cTnT onto TNPs allows us to achieve a limit of detection (LOD) of our cTnT assay at attomolar concentration (∼15 aM) in human plasma. This LOD is at least 50-fold more sensitive than that of other label-free techniques. Furthermore, we demonstrate excellent sensitivity of our sensors in human serum and urine. Importantly, our chip-based fabrication strategy is extremely reproducible. We believe our powerful analytical tool for detection of cTnT directly in human biofluids using this highly reproducible, label-free LSPR sensor will have great potential for early diagnosis of heart attack and thus increase patients' survival rate.

Plasmon-based sensors are excellent tools for a label-free detection of small biomolecules. An interesting group of such sensors are plasmonic nanorulers that rely on the plasmon hybridization upon modification of their morphology to sense nanoscale distances. Sensor geometries based on the interaction of plasmons in a flat metallic layer together with metal nanoparticles inherit unique advantages but need a special optical excitation configuration that is not easy to miniaturize. Herein, we introduce the concept of nanoruler excitation by direct, electrically induced generation of surface plasmons based on the quantum shot noise of tunneling currents. An electron tunneling junction consisting of a metal-dielectric-semiconductor heterostructure is directly incorporated into the nanoruler basic geometry. With the application of voltage on this modified nanoruler, the plasmon modes are directly excited without any additional optical component as a light source. We demonstrate via several experiments that this electrically driven nanoruler possesses similar properties as an optically exited one and confirm its sensing capabilities by the detection of the binding of small biomolecules such as antibodies. This new sensing principle could open the way to a new platform of highly miniaturized, integrated plasmonic sensors compatible with monolithic integrated circuits.

Aminoglycoside antibiotics are used in the treatment of infections caused by Gram-negative bacteria, and are often dispensed only in severe cases due to their adverse side effects. Patients undergoing treatment with these antibiotics are therefore commonly subjected to therapeutic drug monitoring (TDM) to ensure a safe and effective personalised dosage. The ability to detect these antibiotics in a rapid and sensitive manner in human fluids is therefore of the utmost importance in order to provide effective monitoring of these drugs, which could potentially allow for a more widespread use of this class of antibiotics. Herein, we report on the detection of various aminoglycosides, by exploiting their ability to aggregate gold nanoparticles. The number and position of the amino groups of aminoglycoside antibiotics controlled the aggregation process. We investigated the complementary techniques of surface enhanced Raman spectroscopy (SERS) and localized surface plasmon resonance (LSPR) for dual detection of these aminoglycoside antibiotics and performed an in-depth study of the feasibility of carrying out TDM of tobramycin using a platform amenable to high throughput analysis. Herein, we also demonstrate dual detection of tobramycin using both LSPR and SERS in a single platform and within the clinically relevant concentration range needed for TDM of this particular aminoglycoside. Additionally we provide evidence that tobramycin can be detected in spiked human serum using only functionalised nanoparticles and SERS analysis.

Selectivity is often a major obstacle for localized surface plasmon resonance-based biosensing in complex biological solutions. An additional degree of selectivity can be achieved through the incorporation of shape complementarity on the nanoparticle surface. Here, we report the versatile fabrication of substrate-bound Au-Ag nanobowl arrays through the galvanic ion replacement of silver nanodisk arrays. Both localized surface plasmon resonance (LSPR) and surface enhanced Raman spectroscopy (SERS) were carried out to detect the binding of analytes of varying size to the nanobowl arrays. Large increases in the LSPR and SERS response were measured for analytes that were small enough to enter the nanobowls, compared to those too large to come into contact with the interior of the nanobowls. This size-selective sensing should prove useful in both size determination and differentiation of large analytes in biological solutions, such as viruses, fungi, and bacterial cells.

As an important biomarker and therapeutic target, telomerase has attracted extensive attention concerning its detection and monitoring. Recently, enzyme-assisted amplification approaches have provided useful platforms for the telomerase activity detection, however, further improvement in sensitivity is still hindered by the single-step signal amplification. Herein, we develop a quadratic signal amplification strategy for ultrasensitive surface-enhanced Raman scattering (SERS) detection of telomerase activity. The central idea of our design is using telomerase-induced silver nanoparticles (AgNPs) assembly and silver ions (Ag(+))-mediated cascade amplification. In our approach, each telomerase-aided DNA sequence extension could trigger the formation of a long double-stranded DNA (dsDNA), making numerous AgNPs assembling along with this long strand through specific Ag-S bond, to form a primary amplification element. For secondary amplification, each conjugated AgNP was dissolved into Ag(+), which can effectively induce the 4-aminobenzenethiol (4-ABT) modified gold nanoparticles (AuNPs@4-ABT) to undergo aggregation to form numerous "hot-spots". Through quadratic amplifications, a limit of detection down to single HeLa cell was achieved. More importantly, this method demonstrated good performance when applied to tissues from colon cancer patients, which exhibits great potential in the practical application of telomerase-based cancer diagnosis in early stages. To demonstrate the potential in screening the telomerase inhibitors and telomerase-targeted drugs, the proposed design is successfully employed to measure the inhibition of telomerase activity by 3'-azido-3'-deoxythymidine., (Copyright © 2015 Elsevier B.V. All rights reserved.)

High affinity DNA aptamers against C-reactive protein (CRP) were obtained using a microfluidic chip. The aptamers were then used for the construction of an Au nanoparticle enhanced surface plasmon resonance biosensor, which was introduced for the detection of CRP at concentrations ranging from 10 pM to 100 nM in diluted human serum.

Plasmonic resonances in metallic nanoparticles are exploited to create efficient optical filtering functions. A finite element method is used to model metallic nanoparticle gratings. The accuracy of this method is shown by comparing numerical results with measurements on a two-dimensional grating of gold nanocylinders with an elliptic cross section. A parametric analysis is then performed in order to design efficient filters with polarization dependent properties together with high transparency over the visible range. The behavior of nanoparticle gratings is also modeled using the Maxwell-Garnett homogenization theory and analyzed by comparison with the diffraction of a single nanoparticle. The proposed structures are intended to be included in optical systems that could find innovative applications.

A highly sensitive localized surface plasmon resonance (LSPR) aptasensor for detection of adenosine triphosphate (ATP) has been developed. The sensor utilizes two split ATP aptamers, one (receptor fragment) being covalently attached to the surface of a gold nanorod (GNR) and the other labeled with a random DNA sequence and TAMRA dye (probe fragment). In the presence of both ATP and the probe fragment, a significant shift takes place in the wavelength of the LSPR band. This phenomenon is a consequence of the fact that the split fragments assemble into an intact folded structure in the presence of ATP, which brings about a decrease in the distance between the GNR surface and TAMRA dye and an associated LSPR wavelength. By using this sensor system, concentrations of ATP in the range of 10 pM-10 μM can be determined. In addition, by taking advantage of its denaturation properties, the LSPR aptasensor can be reused by simply subjecting it to quadruple salt-addition/2M NaCl washing steps. That the new method is applicable to biological systems was demonstrated by its use to measure ATP concentrations in E. coli and, thus to determine cell concentrations as low as 1.0×10(3) CFU., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Localized surface plasmon resonance (LSPR) has emerged as a leader among label-free biosensing techniques in that it offers sensitive, robust, and facile detection. Traditional LSPR-based biosensing utilizes the sensitivity of the plasmon frequency to changes in local index of refraction at the nanoparticle surface. Although surface plasmon resonance technologies are now widely used to measure biomolecular interactions, several challenges remain. In this article, we have categorized these challenges into four categories: improving sensitivity and limit of detection, selectivity in complex biological solutions, sensitive detection of membrane-associated species, and the adaptation of sensing elements for point-of-care diagnostic devices. The first section of this article will involve a conceptual discussion of surface plasmon resonance and the factors affecting changes in optical signal detected. The following sections will discuss applications of LSPR biosensing with an emphasis on recent advances and approaches to overcome the four limitations mentioned above. First, improvements in limit of detection through various amplification strategies will be highlighted. The second section will involve advances to improve selectivity in complex media through self-assembled monolayers, "plasmon ruler" devices involving plasmonic coupling, and shape complementarity on the nanoparticle surface. The following section will describe various LSPR platforms designed for the sensitive detection of membrane-associated species. Finally, recent advances towards multiplexed and microfluidic LSPR-based devices for inexpensive, rapid, point-of-care diagnostics will be discussed.

We demonstrate that Pd nanospheres exhibit much higher susceptibility of the localized surface plasmon resonance (LSPR) peak to medium refractive index changes than commonly used plasmonic sensing materials such as Au and Ag. The susceptibility of spherical Au nanoparticle-core/Pd-shell nanospheres (Au/PdNSs, ca. 73 nm in diameter) was found to be 4.9 and 2.5 times higher, respectively, than those of Au (AuNSs) and Ag nanospheres (AgNSs) having similar diameters. The experimental finding was theoretically substantiated using the Mie exact solution. We also showed from a quasi-static (QS) approximation framework that the high susceptibility of Pd LSPR originates from the smaller dispersion of the real part of its dielectric function than those of Au and Ag LSPR around the resonant wavelength. We conclude that the Pd nanoparticle is a promising candidate of "the third plasmonic sensing material" following Au and Ag to be used in ultrahigh-sensitive LSPR sensors.

Two novel surface plasmon resonance immunosensors were fabricated for detection of the Bacillus thuringiensis Cry1Ab protein and to demonstrate their performance in analyzing Cry1Ab protein in crop samples. Sensor 2 was modified by 1,6-hexanedithiol, Au/Ag alloy nanoparticles, 3-mercaptopropionic acid, and protein A (or not [sensor 1]), with Cry1Ab monoclonal antibody. As a result, both of the immunosensors exhibited satisfactory linear responses in the Cry1Ab protein concentration ranges of 10 to 500ngml(-1) and 8 to 1000ngml(-1), and the detection limits were 5.0 and 4.8ngml(-1), respectively. The immunosensors possessed good specificity and acceptable reproducibility. In addition, crop samples could be analyzed after a simple treatment. The transgenic crops could be easily identified from the conventional ones by the two immunosensors., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Rolling circle amplification (RCA) of DNA is a sensitive and cost effective method for the rapid identification of pathogens without the need for sequencing. In this study, a surface plasmon resonance DNA biosensor based on RCA with a gold (Au) nanoparticle surface was established for isothermal identification of DNA. The probes included a specific padlock probe, a capture probe (CP), which is bound to biotin, and an Au nanoparticle-modified probe, which hybridizes with the RCA products. The CP was assembled on gold nanoparticles to increase its ability to bind and hybridize. The linear padlock probe, which was designed to circularize by ligation upon recognition of the bacterial pathogen-specific sequence in 16S rDNA, hybridizes to fully complementary sequences within the CP. Upon recognition, each target gene DNA is distinguished by localization onto the corresponding channel on the chip surface. Then, the immobilized CPs act as primers to begin the in situ solid-phase RCA reaction, which produces long single-stranded DNA. The RCA products fixed on the chip surface cause significant surface plasmon resonance angle changes. We demonstrated that six different bacterial pathogens can be identified simultaneously and that 0.5 pM of synthetic oligonucleotides and 0.5 pg μl(-1) of genomic DNA from clinical samples can be detected by this method with low background signals. Therefore, the multiplex diagnostic method provides a highly sensitive and specific approach for the rapid identification of positive samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Free/total prostate antigen (f/t-PSA) ratio in serum as a promising parameter has been used to improve the differentiation of benign and malignant prostate disease. In order to obtain the accurate and reliable f/t-PSA ratio, the simultaneous detection of f-PSA and t-PSA with high sensitivity and specificity is required. In this work, the dual-channel surface plasmon resonance (SPR) has been employed to meet the requirement. In one channel, t-PSA was directly measured with a linear range from 1.0 to 20.0 ng/mL. In another channel, due to the low concentration of f-PSA in serum, the asynchronous competitive inhibition immunoassay with f-PSA@Au nanoparticles (AuNPs) was developed. As expected, the detection sensitivity of f-PSA was greatly enhanced, and a linear correlation with wider linear range from 0.010 to 0.40 ng/mL was also achieved. On the other hand, a simple method was explored for significantly reducing the non-specific adsorption of co-existing proteins. On basis of this, the f/t-PSA ratios in serum samples from prostate cancer (PCa) or benign prostatic hyperplasia (BPH) patients were measured. And it was found that there was significant difference between the distributions of f/t-PSA ratio in BPH patients (16.44±1.77%) and those in PCa patients (24.53±4.97%). This present work provides an effective method for distinguishing PCa from BPH, which lays a potential foundation for the early diagnosis of PCa., (Copyright © 2014. Published by Elsevier B.V.)

Localized surface plasmon resonance (LSPR) occurring in noble metal nanoparticles (e.g., Au) is a widely used phenomenon to report molecular interactions. Traditional LSPR sensors typically monitor shifts in the peak position or extinction in response to local refractive index changes in the close vicinity of the nanoparticle surface. The ability to resolve minute shifts/extinction changes is to a large extent limited by instrumental noise. A new strategy to evaluate LSPR responses utilizing changes in the shape of the extinction spectrum (the curvature) is proposed. The response of curvature to refractive index changes is investigated theoretically using Mie theory and an analytical expression relating the curvature to the refractive index is presented. The experimentally derived curvatures for 13 nm spherical gold nanoparticles (AuNPs) exposed to solvents with different bulk refractive indices confirm the theoretical predictions. Moreover, both the calculated and experimental findings suggest that the curvature is approximately a linear function of refractive index in regimes relevant to bio and chemical sensing. We demonstrate that curvature is superior over peak shift and extinction both in terms of signal-to-noise (S/N) ratio and reliability of LSPR sensors. With a curvature, one could readily monitor submonolayer adsorption of a low molecular weight thiol molecule (M(w) = 458.6) onto 13 nm AuNPs. It is also worthwhile mentioning that curvature is virtually insensitive to instrumental instabilities and artifacts occurring during measurement. Instabilities such as baseline tilt and shift, shift in peak position as well as sharp spikes/steps in the extinction spectra do not induce artifacts in the sensorgrams of curvature.

Heavy-metal ions pose severe risks for human health and the environment. In particular, mercury-based pollutants are of great environmental concern because of the high toxicity of many Hg compounds. It is important to monitor the levels of potentially toxic metal Hg(II) in aquatic ecosystems. Gold nanoparticles (AuNPs) as nanomaterials have been generally studied. It is because their unique electrical, chemical, optical, and catalytic properties, AuNPs have caused widespread interest for applications in biological and chemical analysis and detection. In the present work, the authors took advantage of the aggregation-induced localized surface plasmon resonance (LSPR) light scattering signal change of sodium thioglycolate functionalized AuNPs in aqueous solutions to develop a highly efficient optical sensor for Hg(II). The as-modified AuNPs demonstrate that high negative charge densities exist on their surfaces at pH 9.0 Britton-Robinson (BR) buffer solution. The AuNPs occur aggregate in solution through chelation in the presence of Hg(II). The scanning electron microscope (SEM) images for the AuNPs display typical shapes of these AuNPs as regular and almost individual spherical particles. The color change of the AuNPs solution was induced by the addition of Hg(II) and it immediately changed from red to purple due to the aggregation. Under optimum conditions, a good linear relationship was obtained from 0.08 to 0.8 μmol x L(-1) with a correlation coefficient of 0.997 6, and the limit of detection (LOD) was 8.0 nmol x L(-1). PEG20000 was employed as a system stabilizer. The proposed method has an excellent selectivity for Hg(II) in aqueous medium over other metal ions. The optimum test of reaction conditions, including the amount of AuNPs, pH value, reaction stability and ionic strength, were also investigated. This method has been used for determination of Hg(II) successfully in environmental water sample. This approach manifested several advantages including short analysis time, high sensitivity, low cost, excellent selectivity and ease of operation.

Inspecting biological cells with bright-field light microscopy often engenders a challenge, owing to their optical transparency. We show that imaging contrast can be greatly enhanced as yeast cells are placed on a silver nanoparticle array. Its near- and far-field traits, revealed by electrodynamic simulations, illustrate that the enhancement is attributed to the sensitivity of its plasmonic characteristics to the attached cells. This study demonstrates that the silver nanoparticle array can serve as the agent for concurrently enhancing Raman scattering and imaging contrast of microorganisms for identification and examination.

Squamous cell carcinoma antigen (SCCa), as a tumor biomarker, plays an important role in adjuvant diagnosis, treatment evaluation, and prognosis prediction for cervical cancer patients. Localized surface plasmon resonance (LSPR) technique based on noble metal nanoparticles bypasses the disadvantages of traditional testing strategies, in terms of free-labeling, short assay time, good sensitivity, and selectivity. Herein, we develop a novel and reusable LSPR biosensor for the detection of SCCa. First, a triangle-shaped silver nanoparticle array was fabricated using the nanosphere lithography method. Next, we investigated and verified the feasibility of amino coupling method using 11-mercaptoundecanoic acid (MUA) to form a functionalized chip surface with monoclonal anti-SCCa antibodies on the silver nanoparticles for distinct detection of SCCa. Different concentrations of SCCa were successfully tested in both buffer and human serum by the ultrasensitive and specific LSPR system, with a linear quantitative detection range of 0.1-1,000 pM under optimal conditions. With appropriate regeneration solution, for example 50 mM glycine-HCl (pH 2.0), the LSPR biosensor featured effective fabrication reproducibility, which reduced both production cost and testing time. Our study represents the first application of the LSPR biosensor in cervical cancer, and demonstrates that the rapid, simple, and reusable nanochip can serve as a potential alternative for clinical serological diagnosis of SCCa in cervical cancer patients.

Over the past five years, new developments in the field of plasmonics have emerged with the goal of finely tuning a variety of metallic nanostructures to enable a desired function. The use of plasmonics in spectroscopy is of course of great interest, due to large local enhancements in the optical near field confined in the vicinity of a metal nanostructure. For a given metal, such enhancements are dependent on the shape of the structure as well as the optical properties (wavelength, phase, polarization) of the impinging light, offering a large degree of control over the optical and spatial localization of the plasmon resonance. In this focal point, we highlight recent work that aims at revealing the spatial position of the localized plasmon resonances using a variety of optical and non-optical methods.

Quantifying carbohydrate-protein (ligand-receptor) interactions is important to understand diverse biological processes and to develop new diagnostic and therapeutic methods. We develop an approach to quantitatively study carbohydrate-protein interactions by Au nanoparticle localized surface plasmon resonance (LSPR) peak position shift at the single particles level. Unlike the previous techniques for single particle LSPR spectral imaging, only the first-order streak of an individual nanoparticle is needed to extract a LSPR spectrum, which has great potential to increase throughput to 500 single particle spectra in each frame. LSPR peak shift of protein modified single Au nanoparticles is found to be a function of its ligand concentration, which can be used to fit the binding constants of the interactions. The moderate interactions of Antithrombin III (AT III) and heparins including low molecular weight heparin (LMWH) are determined as well as the strong interaction of transferrin and antitransferrin and the weak interaction of bovine serum album (BSA) and heparin. The measured binding constants of transferrin to antitransferrin, heparin and LMWH to AT III, and BSA to heparin are (3.0 ± 0.6) × 10(9) M(-1), (3.1 ± 0.3) × 10(6) M(-1), (8.0 ± 0.5) × 10(5) M(-1), and (5.1 ± 0.1) × 10(3) M(-1), respectively, which are in good agreement with the reported values.

We present a sensing platform based on the morphological changes of plasmonic nanoparticles. Detection is achieved by using a stimulus-responsive polyelectrolyte-aptamer thin film to control the rate of diffusion of etchants that alter the shape and size of the nanoparticles. We show that the extent of morphological change and the colorimetric response depends on the amount of analyte bound. Contrary to conventional plasmonic sensors, our detection scheme does not rely on any interparticle interaction and is completely label-free, both in terms of the analyte and the capture probe. It presents new opportunities for designing facile, low-cost, and portable chip-based sensors for biodiagnostic and field analysis.

Metallic nanostructures supporting collective localized surface plasmons (cLSPs) are investigated for the amplification of signal in fluorescence biosensors. cLSPs modes are supported by diffractive arrays of metallic nanoparticles that are embedded in a refractive index-symmetrical environment. They exhibit lower damping and thus their excitation is associated with higher field intensity enhancement and narrower resonance than that for regular localized surface plasmons. Through finite difference time domain (FDTD) simulations, we designed a novel cLSP structure that exhibit two resonances overlapping with absorption and emission wavelengths of assumed fluorophore (similar to Cy5 or Alexa Fluor 647). The simulations of surface plasmon-enhanced fluorescence (PEF) took into account the cLSP-driven excitation, directional emission, and mediated quantum yield in realistic sandwich immunoassays that utilize fluorophore-labeled detection antibodies. Achieved results indicate that cLSP-based structures holds potential for extraordinarily high fluorescence intensity enhancement that exceeds a value of 10(3).