Search

A fiber/Ag-Cu films surface plasmon resonance (SPR) refractive index (RI) sensor composed of multimode fiber-no-core-fiber-multimode fiber (MMF-NCF-MMF) structure is designed. The sensing region length and Cu film deposition time of sensor are gradually optimized by the control variable method, which finally achieves the improvement of sensor properties. We experimentally compared the sensing performance of the fiber/Ag film and fiber/Ag-Cu films sensor. Experimental results show that the fiber/Ag-Cu films sensor has good linearity (R-square = 0.993), and its sensitivity is as high as 3957 nm/RIU in the refractive index detection range of 1.3328-1.3853, which is 1109 nm/RIU higher than the sensitivity of a conventional fiber/Ag film sensor. The sensor presented in this paper adopts the structure with composite metal film, which outperforms the common single-layer metal film in chemical stability such as oxidation resistance and mechanical hardness. Meanwhile, the SPR sensor with MMF-NCF-MMF structure has the advantages of convenient manufacture and compact structure. In conclusion, it can bestow a unique advantage in the field of biological detection or chemical analysis.

A high sensitivity plasmonic temperature sensor based on a side-polished photonic crystal fiber is proposed in this work. In order to achieve high sensitivity and high stability, the gold layer is coated on the side-polished photonic crystal fiber to support surface plasmon resonance. The mixture of ethanol and chloroform is used as the thermosensitive liquid. The performances of the proposed temperature sensor were investigated by the finite element method (FEM). Simulation results indicate that the sensitivity of the temperature sensor is as high as 7.82 nm/°C. It has good linearity (R 2 = 0.99803), the resolution of 1.1 Ă— 10âˆ'3 °C, and the amplitude sensitivity of 0.1008 °Câˆ'1. In addition, the sizes of the small air hole and polishing depth have little influence on the sensitivity. Therefore, the proposed sensor shows a high structure tolerance. The excellent performance and high structure tolerance of the sensor make it an appropriate choice for temperature measurement. [ABSTRACT FROM AUTHOR]

A dual-polarized photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR) was proposed for measuring the refractive indexes (RIs) of liquids. A gold film and a liquid analyte were successively wrapped around the outer surface of the PCF to stimulate the external SPR effect, which greatly reduced the manufacturing difficulties, compared to depositing the gold film and filling the inner air holes of the PCF with liquid analyte. The performance of the proposed PCF sensor was numerically investigated using the finite-element method. The results show that the proposed PCF sensor can realize dual-polarized detection in the RI range of 1.36–1.42. The x and y polarization (X-P and Y-P) core modes were coupled to the X-P second-order and Y-P first-order surface-plasmon polariton modes, respectively. As the the RI of the analyte increased, the wavelength sensitivity increased and, as a result, maximum values of 15 900 nm RIU−1 for X-P and 16 900 nm RIU−1 for Y-P were achieved. Correspondingly, we obtained a maximum amplitude sensitivity of 2026.05 RIU−1 for X-P and 2102.65 RIU−1 for Y-P. In addition, the fabrication tolerance of the proposed PCF was increased to ±0.4 μm, which made the proposed PCF a favorable candidate for the detection of liquids. [ABSTRACT FROM AUTHOR]

Highlights • The proposed PCF structure is a combination of circular layout and D-shaped. • The gold film is deposited on the polishing surface, the analyte is placed on the outer layer of the D-shaped PCF. • The proposed PCF sensor is feasible for the structural parameters with fabrication tolerance of ±1%. • The proposed sensor easy to fabricate and has high sensitivity. Abstract A high sensitivity D-shaped photonic crystal fiber sensor based on surface plasmon resonance is proposed for refractive index sensing. By using finite element method, the sensing properties of the proposed sensor are investigated. The numerical results show a very high average sensitivity of 14600 nm/RIU with the high resolution of 6.80 × 10−6 RIU for refractive index (RI) of analytes ranging from 1.420 to 1.435. The layout of the air holes is designed to be circular and only two layers in this D-shaped photonic crystal fiber. The metallic gold is used as the surface plasmon resonance activity material, which is deposited on the polishing surface. The analyte is placed on the outer layer of the D-shaped photonic crystal fiber. This D-shaped photonic crystal fiber solves the difficulty of gold-plated film and fill analyte in the holes. The proposed PCF structure is a combination of circular layout and D-shaped, which also leads to the proposed sensor easy to fabricate and has considerable sensitivity. [ABSTRACT FROM AUTHOR]

• A novel SPR sensor based on D-shaped PCF with offset-core is proposed and demonstrated for the liquid RI measurement. • The structural design of the D-shaped fiber makes the placement of the liquid to be tested more convenient. • The SPR sensor with high sensitivity can be realized by introducing the offset-core. • Ultra-high wavelength sensitivity and amplitude sensitivity of 42,000 nm/RIU and 2204.49 RIU−1 are obtained. We propose a novel D-shaped offset-core photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR) for the liquid refractive index (RI) measurement. The D-shaped structural design makes the placement of the liquid to be tested more convenient. The offset-core is designed to improve the sensitivity of the SPR sensor. The optical propagation characteristics of the proposed sensor were investigated by the finite element method (FEM). Numerical results show that more energy of the core mode transfers to the gold surface as the analyte RI increases. The wavelength sensitivity increases with the increase of RI, and the maximum wavelength sensitivity can reach to 42,000 nm/RIU. What's more, the maximum amplitude sensitivity is up to 2204.49 RIU−1. The proposed sensor shows excellent performances in terms of wavelength sensitivity and amplitude sensitivity than some previous reported sensors. We believe that it can become a favorable competitor in the liquid RI measurement fields. [ABSTRACT FROM AUTHOR]

A narrowband dual-polarization filter based on photonic crystal fiber (PCF) with Au-Ag double-layer films is proposed. The cladding of PCF is composed of three layers of air holes, and Au-Ag double-layer films are coated on two symmetrical air holes to excite surface plasmon resonance (SPR) effect. The special mechanism of the Au-Ag double-layer films takes advantage of the narrower full width at half maximum (FWHM) of silver. On the other hand, gold is used to protect the silver from oxidation and improve the stability of the filter, and can also enhance SPR effect. The simulation results show that the dual-polarization filter with double-layer metal films has higher resonance absorption and better spectra than that with the single-layer metal film. When the thickness of the double-layer metal films is 22.5 nm (the thickness of silver film is 18 nm), the confinement loss of dual-polarization filter at 1430 nm is achieved to 64.08 dB/cm (y-pol core mode) and at 1530 nm is achieved to 37.26 dB/cm (x-pol core mode). The wavelength range of crosstalk (CT) greater than 20 dB and less than −20 dB are 1410–1450 nm and 1510–1550 nm for the device length of 10 mm, respectively. The CT is achieved 555.07 dB and −321.54 dB at the wavelength of 1430 nm and 1530 nm, respectively. These characteristics show that the filter has excellent performance, and will become a suitable candidate for a narrowband polarization filter. [ABSTRACT FROM AUTHOR]

In this paper, a dual-polarizated photonic crystal fiber filter (PCF) based on surface plasmon resonance (SPR) was proposed. Its polarization characteristics were numerically researched by finite element method (FEM). The results indicate that the polarization filtering of the filter be able to fulfill in dual communication bands of 1310 and 1550 nm. The confinement loss reaches 80,711.4 dB/m for the x polarization core mode at the wavelength of 1310 nm, while 46,614.5 dB/m for the y polarization core mode at the wavelength of 1550 nm. When the length of PCF is 2.5 mm, the extinction ratios of x and y polarization core modes can achieve 1705.27 and − 883.46 dB, respectively. For the communication windows of 1310 and 1550 nm, the filtering bandwidths can reach to 390 and 350 nm, respectively. These excellent characteristics are beneficial to the design and manufacture of filter devices. • A PCF dual windows polarization filter based on SPR is proposed. The square arrangement of air holes is easy to prepare. • The losses of the filter at dual windows can reach 80,711.4 dB/m and 46,614.5 dB/m. • When L PCF = 2.5 mm, the ER of the two orthogonal modes can reach 1705.27 and − 883.46 dB. The bandwidth can reach 390 nm and 350 nm. [ABSTRACT FROM AUTHOR]

• The D-shaped microstructure fiber sensor is suitable for external plasmonic sensing. • The fiber sensor performs sensing detection by means of double resonance peaks. • The fiber sensor has high sensitivity, high resolution and high figure of merit at the near-infrared wavelength. • Double-peaks detection is simultaneously self-calibrated as both detection and verification. A miniature D-shaped microstructure fiber sensor is proposed for external plasmonic sensing. The hollow core not only effectively modulates the core field, but also efficiently facilitates the excitation of surface plasmon resonance near the micro-opening. The refractive indices of analyte ranging from 1.37 to 1.41 can be detected by double-loss peaks tracing in the near-infrared wavelength. And the more reliable method of double-peaks detection achieves detection and verification simultaneously, which improves largely the accuracy of sensing detection. In addition, the transmission properties and sensing characteristics for the designed sensor is explored as well corresponding to various geometrical parameters. An average wavelength sensitivity is 26,927 nm/RIU with the resolution of 3.71 × 10−6 RIU, and the maximum amplitude sensitivity of 5059 RIU−1 is obtained with the resolution of 1.97 × 10−6 RIU, moreover, the maximum figure of merit can reach to 1282, which can be found a wide application prospect in the field of chemical, biological and medical. [ABSTRACT FROM AUTHOR]

A dual-polarized microstructure fiber sensor is based on surface plasmon resonance, which is arranged of pentagonal lattice to achieve refractive index sensing in the near-infrared spectrum. The gold nanowire-filled fiber sensor exhibits excellent sensing characteristics and improved transmission properties. Finite element method is used for computational analysis and structural optimization for the fiber sensor. When the refractive index of the analyte range from 1.32 to 1.38, dual-polarizd sensing can be implemented as a self-calibration with wavelengths increasing from 700 to 1200 nm. For the proposed sensor, the highest wavelength sensitivity of 10,286 nm/RIU is exhibited with a sensor resolution of 9.72×10−6 RIU, and the corresponding amplitude sensitivity and figure of merit are as high as 544.0 RIU−1 and 146.9. Moreover, the sensing length of at least 1.14 mm ensures accurate detection of optical signals for proposed sensor. Owing to the above advantages, the proposed sensor is suitable for high integration and high precision sensitivity detection. [ABSTRACT FROM AUTHOR]