Search

This letter presents two high-gain, multidirector Yagi-Uda antennas for use within the 24.5-GHz ISM band, realized through a multilayer, purely additive inkjet printing fabrication process on a flexible substrate. Multilayer material deposition is used to realize these 3-D antenna structures, including a fully printed 120- μm-thick dielectric substrate for microstrip-to-slotline feeding conversion. The antennas are fabricated, measured, and compared to simulated results showing good agreement and highlighting the reliable predictability of the printing process. An endfire realized gain of 8 dBi is achieved within the 24.5-GHz ISM band, presenting the highest-gain inkjet-printed antenna at this end of the millimeter-wave regime. The results of this work further demonstrate the feasibility of utilizing inkjet printing for low-cost, vertically integrated antenna structures for on-chip and on-package integration throughout the emerging field of high-frequency wireless electronics. [ABSTRACT FROM PUBLISHER]

Inkjet printing on flexible paper and additive manufacturing technologies (AMT) are introduced for the sustainable ultra-low-cost fabrication of flexible radio frequency (RF)/microwave electronics and sensors. This paper covers examples of state-of-the-art integrated wireless sensor modules on paper or flexible polymers and shows numerous inkjet-printed passives, sensors, origami, and microfluidics topologies. It also demonstrates additively manufactured antennas that could potentially set the foundation for the truly convergent wireless sensor ad-hoc networks of the future with enhanced cognitive intelligence and “zero-power” operability through ambient energy harvesting and wireless power transfer. The paper also discusses the major challenges for the realization of inkjet-printed/3-D printed high-complexity flexible modules as well as future directions in the area of environmentally-friendly “Green”) RF electronics and “Smart-House” conformal sensors. [ABSTRACT FROM PUBLISHER]

This paper introduces the first-of-its-kind wireless passive sensing platform combining radio frequency identification (RFID), microfluidics, and inkjet printing technology that enables remote fluid analysis and requires as little as 3 \muL of fluid. The demonstrated variable microfluidic capacitors, resonators, and RFID tags are fabricated using a novel rapid, low-cost, and low-temperature additive inkjet process, making them disposable. However, even with their disposable nature, the RF microfluidic devices exhibit repeatability and long-term reusability for accurately detecting water, various alcohols, and % content of water/alcohol mixtures down to 1% water in ethanol. While the main discussion is on fluid sensing, the demonstrated components can also be used in fluid-tunable RF applications. [ABSTRACT FROM AUTHOR]

A complete characterization of the inkjet printing process using metallic nanoparticle inks on a paper substrate for microwave frequencies up to 12.5 GHz as well as its application to low-cost, high gain and wideband antenna design are demonstrated in this work. Laser and heat sintering of metallic nanoparticles are compared on paper substrate for the first time which demonstrate immense cost and time benefits of laser sintering. The antennas fabricated using the characterized process include a Vivaldi for the UWB band which exhibits a significantly higher gain of up to 8 dBi as compared to the currently published inkjet printed antennas, and a novel slow-wave log periodic dipole array which employs a new miniaturization technique to show 20% width reduction. [ABSTRACT FROM PUBLISHER]

For the first time, high quality factor (Q), meander inductors are demonstrated utilizing inkjet-printing on organic paper substrates. Quality factors of up to 25, which is an order of magnitude greater than previous works, and inductance values of up to 8 nH are achieved. The high self-resonance frequency (SRF) of 8 GHz makes it possible for the inductors to be used in the 900 MHz and 2.4 GHz RFID bands, and in 5 GHz Wifi band. Furthermore, a study into the performance and miniaturization effects of inkjet-printing ferromagnetic nanomaterial onto the inductors shows increases in inductance of up to 5%. Applications for inkjet printed inductors include all-printed flexible and wearable filters, resonators, and microwave matching networks. [ABSTRACT FROM PUBLISHER]

Vertically-integrated metal-insulator-metal (MIM) capacitors on silicon are demonstrated for the first time utilizing an entirely additive RF-specific inkjet-printing process. The inkjet-printed MIM capacitors demonstrate a high capacitance per unit area of up to 33 pF/mm^2 by utilizing novel dielectric inks, while achieving quality factors (Q) up to 25 and self-resonant frequencies (SRFs) above 1 GHz. Measurements of dielectric permittivity, leakage current, voltage breakdown, and fabrication repeatability are presented confirming the high-performance operation of the printed MIM capacitors. [ABSTRACT FROM PUBLISHER]