Search

Keywords: Cancellous bone; digital volume correlation (DVC); strain localization; µ-CT; bone fractures EN Cancellous bone digital volume correlation (DVC) strain localization µ-CT bone fractures S42 S44 3 01/29/21 20191002 NES 191002 1. Cancellous bone, digital volume correlation (DVC), strain localization, µ-CT, bone fractures. [Extracted from the article]

This work provides a comprehensive characterization and analysis of deformation and fatigue damage mechanisms in a nickel-based superalloy during ambient temperature fatigue and points to a fundamental deformation mechanism that results in the onset of crack nucleation. Strain and slip irreversibility are investigated at the nanometer scale using high-resolution digital image correlation and high-resolution electron backscatter diffraction, highlighting distinct deformation mechanisms contributing to crack nucleation. It is observed during early fatigue cycling at relatively low applied stress, the formation of intense slip events that induce grain boundary shearing. This results in intense micro-scale strain in the neighboring grains, producing localized plasticity and stresses. Such stresses facilitate fatigue extrusion–intrusion mechanisms during subsequent cycling, resulting in preferred crack nucleation. Finally, the configurations within the microstructure that promote such deformation and damage mechanisms sequence are highlighted. [Display omitted] [ABSTRACT FROM AUTHOR]

In polycrystalline metallic materials, quantitative and statistical assessment of the plasticity in relation to the microstructure is necessary to understand the deformation processes during mechanical loading. Plastic deformation often localizes into physical slip bands at the sub-grain scale. Detrimental microstructural configurations that result in the formation and evolution of slip bands during loading require advanced strain mapping techniques for the identification of these atomically sharp discontinuities. A new discontinuity-tolerant DIC method, Heaviside-DIC, has been developed to account for discontinuities in the displacement field. Displacement fields have been measured at the scale of the physical slip bands over large areas in nickel-based superalloys by high resolution scanning electron microscopy digital image correlation (SEM DIC). However, conventional DIC methods cannot quantitatively measure plastic localization in the presence of discontinuous kinematic fields such as those produced by slip bands. The Heaviside-DIC technique can autonomously detect discontinuities, providing information about their location, inclination, and identify slip systems (in combination with orientation mapping). Using Heaviside-DIC, discontinuities are physically evaluated as sharp shear-localization events, allowing for the quantitative measure of strain amplitude nearby the discontinuities. Measurements using the new Heaviside-DIC technique are compared to conventional DIC methods for identical materials and imaging conditions. [ABSTRACT FROM AUTHOR]

The process of crack initiation has been investigated in three widely used titanium alloys with different microstructures and loading conditions. Using low-cycle fatigue tests, a unique crack nucleation mechanism involving strain localization at (0001) twist boundaries has been identified. In order to constitute a potential crack initiation site, the twist boundary must experience a high resolved shear stress and a high normal stress. Crack initiation at these boundaries is most frequently associated with twist angles spanning the 10° - 20° range. Deformation prior to crack initiation at these rare microstructural configurations has been characterized using transmission electron microscopy and high-resolution digital image correlation across large fields of view. The (0001) twist boundaries are preferential locations for early and intense strain localization. Prior to crack nucleation, deformation proceeds via shear along such boundaries where no β layer at the interface was evidenced. The presently discussed crack formation mechanism is believed to be of broad relevance as it is not significantly influenced by microstructural parameters such as the α grain size, the degree of microtexture, the β phase fraction or the surrounding microstructure as well as α and β compositions. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] The slip localization behavior of the polycrystalline nickel base superalloy Inconel 718 during monotonic tensile loading at room temperature, is investigated for the first time in relation to the 3D microstructure. Multi-modal data merging tools are used to recombine high resolution digital image correlation (HR-DIC) data with 3D electron back-scatter diffraction tomography (3D EBSD), over a wide region of interest. This procedure enables reconstruction of the slip band planes in the 3D microstructure. Statistical analyses conducted over 500 individual slip bands reveal strong correlations between their location and specific microstructure configurations. In particular, over half of the slip bands emanate from triple junction lines (3D lines defined by the junction of three crystals). Moreover, the most intense and longest slip bands, which would become critical fatigue crack nucleation sites during cyclic loading, are located close and parallel to particular annealing twin boundaries and are simultaneously connected to triple junction lines. Crystal plasticity finite elements calculations are performed on the experimental microstructure to identify the slip activity that results in the formation of high intensity slip bands (localized plasticity) or zones of high lattice rotation (non-localized plasticity) in these particular microstructure regions. [ABSTRACT FROM AUTHOR]

The recent development of the high resolution and discontinuity-tolerant digital image correlation technique enables the extraction of discontinuities within a displacement field. The technique provides quantitative analysis of discontinuities arising from slip, shear bands, cracks, and grain boundary sliding in a variety of material systems, including polycrystalline metallic materials. The discontinuity-tolerant digital image correlation method can be implemented to retrieve not only quantitative discontinuity analysis but also the local strain and rotation fields that operate near these discontinuities. The present implementation includes high-resolution digital image correlation (HR-DIC) measurements collected in a scanning electron microscope for analysis of both the plastic and elastic fields that develop during deformation of polycrystalline metallic materials. The combination of the discontinuity-tolerant DIC technique with the computation of internal gradients enables extraction of non-localized strain and rotation fields during plastic deformation of a nickel-based superalloy. Therefore the lattice rotation/expansion and plastic localization that occur during deformation can be determined in a single experiment. This method is validated using synthetic images with preset deformation, and experimental measurements using the electron back scatter diffraction (EBSD) technique. Unlabelled Image • Lattice rotation/expansion and slip localization are quantitatively measured by high resolution digital image correlation under scanning electron microscope • High lattice rotation induced by impingement of slip localization at grain boundaries is observed during deformation of a nickel-based superalloy [ABSTRACT FROM AUTHOR]