Search

Objectives: The aim of this study is to analyze long-term results of the total aortic arch replacement with the frozen elephant trunk technique for primary chronic type B aortic dissection., Methods: Among 322 patients who had the frozen elephant trunk technique, 43 (13.4%) patients (median age, 64.0 years) with primary chronic type B aortic dissection were analyzed. The patients underwent surgery at a median of 27.0 months after the onset of aortic dissection. The false lumen was patent in 30 (69.8%) patients preoperatively., Results: Two patients suffered paraplegia and another died of cerebral infarction. Complete thrombosis of the peri-stent false lumen was achieved in 36 (83.7%) patients. Overall survival, freedom from aortic events, and freedom from aortic reintervention were 83.5%, 37.2%, and 42.2% at 5 years, respectively. Survival rates of the patients with or without aortic events were 75.0% and 95.8% at 5 years (Log-rank, p = 0.22). Late aortic events occurred in 19 (44.2%) patients including distal stent graft-induced new entry, type Ib endoleak, and false lumen dilation. The ratio of the stent graft diameter to the preoperative short axis diameter of the true lumen (hazard ratio, 1.90; 95% confidence interval, 1.01-3.59), and the maximal diameter of a postdissection aneurysm (1.07; 1.01-1.12) were the significant multivariate risk predictors of late aortic events., Conclusions: Late aortic events occurr fairly frequently, and new strategies need to be explored to enhance the effectiveness of this procedure in the future., (© 2024. The Author(s), under exclusive licence to The Japanese Association for Thoracic Surgery.)

The purpose of the present study was to evaluate the clinical outcome of peripheral stent placement after failed balloon angioplasty in patients with grafts who are on hemodialysis. We examined 30 Wallstents that were placed in 26 patients because balloon angioplasty failed or early restenosis (<3 months) occurred within 3 months. We retrospectively reviewed 267 consecutive balloon angioplasties performed in 71 patients with graft access between August 2000 and March 2007. Stent placements accounted for 30 (11.2%) of the 267 balloon angioplasties. The clinical success rate of stent placement was 93.3% (28 of 30 stent placements). The 3-, 6-, and 12-month primary patency rates were 73.3%, 39.3%, and 17.7%, respectively. The 1-, 2-, and 3-year secondary patency rates were 90.2%, 83.8%, and 83.8%, respectively. Primary patency was significantly prolonged by stent placement after early restenosis compared with previous balloon angioplasty alone (P = 0.0059). Primary patency after stent placement was significantly lower than after successful balloon angioplasty without indications for stent placement (P = 0.0279). Secondary patency rates did not significantly differ between stent placement and balloon angioplasty alone. The mean number of reinterventions required to maintain secondary patency after stent placement was significantly larger than that after balloon angioplasty alone (Mann-Whitney U test, P = 0.0419). We concluded that peripheral stent placement for graft access is effective for salvaging vascular access after failed balloon angioplasty and for prolonging patency in early restenosis after balloon angioplasty. However, reinterventions are required to maintain secondary patency after stent placement. Furthermore, peripheral stent placement for graft access cannot achieve the same primary patency as balloon angioplasty alone.

We used metal wires and fibers to fabricate a composite knitted stent and then compare the mechanical characteristics of this stent with those of a pure metallic stent of the same construction in order to develop a stent that offers a comparable degree of expandability as metallic stents but can be used for highly curved lesions that cannot be treated using metallic stents. We fabricated two types of composite knitted stent (N-Z stents), using nitinol wire with a diameter of 0.12 mm and polypara-phenylene-benzobisoxazole (PBO) multifilament fiber (Zyron AS; Toyobo, Osaka, Japan). Stents were knitted into a cylindrical shape using the same textile pattern as a Strecker stent. Two loop lengths (L) of nitinol wire were used in the N-Z stents: L = 1.84 mm (N-Z stent L = 1.84) and L = 2.08 mm (N-Z stent L = 2.08). For the sake of comparison, we fabricated a metallic stent of nitinol using the same textile pattern (N-N stent L = 1.92). We applied a radial compression force diametrically to each stent and applied a bending force diametrically at the free end of a stent with one end fixed in order to evaluate the relationship between stent elasticity and load values. In addition, we macroscopically evaluated the generation of kinks when the stent was bent 180 degrees . The radial compressive force when the stent diameter was reduced by 53% was 6.44 N in the case of N-Z stent L = 1.84, 6.14 N in the case of N-Z stent L = 2.08, and 4.96 N in the case of N-N stent L = 1.92 mm. The composite stent had a radial compressive force higher than that of a metallic stent. The restoring force to longitudinal direction at a 90 degrees bending angle was 0.005 N for N-Z stent L = 1.84, 0.003 N for N-Z stent L = 2.08, and 0.034 N for N-N stent L = 1.92. The restoring force of the composite stent was significantly lower. Finally, the composite stent generated no definitive kinks at a bending angle of 180 degrees , regardless of loop length. However, the N-N stent clearly produced kinks, causing blockage of the inner cavity. In conclusion, the use of a metal and fiber composite in the construction of a knitted stent ensures an expansion performance comparable to that of metallic stents, while providing better kink resistance.

Background: Although metallic stents are characterized by strong expanse of force, thin walls, and easy stent deployment, their removal from the body is usually difficult or impossible due to the difficulty of unraveling their mesh structure. A stent built of a composite material comprising a metallic wire and a polylactic acid (PLA) fiber, in which the metallic wire component could be unraveled after PLA fiber degradation in the body, should allow easy stent removal., Purpose: To evaluate the mechanical strength and retrievability of a composite material stent comprising a metallic wire and a PLA fiber., Material and Methods: We produced a composite material stent comprising a metallic wire and a biodegradable fiber (hybrid stent). As the metallic wire is not cross-linked with itself, but with the PLA fibers only, the hybrid stent can be easily unraveled after PLA fiber degradation. This stent was built with a 0.2-mm stainless-steel wire and a 0.23-mm PLA fiber knitted in the same textile as an Ultraflex stent. For comparison, an identical stent was built using PLA fiber only (PLA stent). The mechanical strength of these stents was tested by the radial expansive force response against circumferential shrinkage stress load. Change in radial force due to PLA fiber degradation was estimated by adding an artificial PLA degeneration process, by immersing each stent in a water bath at 80 degrees C for 48 hours. Retrievability of the hybrid stent after PLA degeneration was examined by hooking and pulling out the residual stainless-steel wire from a silicon tube., Results: The hybrid stent exhibited a linear response in radial expansive force within the range of 15% diameter reduction. The PLA stent did not exhibit linear response at over 15% diameter reduction. Decrease of radial expansive force after PLA degradation was within 5% of the original force in the hybrid stent, but the PLA stent did not create effective radial expansive force. Hybrid stents, even after PLA degradation, exhibited a linear response in radial expansive force, within the range of 15% diameter reduction. The metallic component of the heat-processed hybrid stent was easily unraveled by pulling out the wire., Conclusion: The hybrid stent comprising a stainless-steel wire and a PLA fiber appears to provide effective radial expansive force and retrievability.

Spontaneous and isolated dissecting aneurysm of the superior mesenteric artery is a rare event that has been successfully treated by surgery in several reported cases. To our knowledge, we present the first case of a patient with spontaneous and isolated dissecting aneurysm of the superior mesenteric artery that was successfully treated by endovascular stent-graft placement.