Search

The industrial and medical sectors have a great interest in chitosan due to its unique properties, such as abundance, renewability, non-toxicity, antibacterial activity, biodegradability, and polyfunctionality. In this work, two modified chitosan Schiff bases (ChSB-1 and ChSB-2) were made using condensation methods, and their potential as corrosion inhibitor for carbon steel in 1 M HCl was investigated using chemical and electrochemical techniques. The ChSB-1 and ChSB-2 inhibitors exhibited remarkable inhibitory performance, as evidenced by the mass loss data, which showed 89.3 % and 91.5 % efficacy at 1 mM concentration, respectively. Because of the electron-donor substituent of methoxy (-OCH 3 ), ChSB-2's active sites have more delocalized electrons than ChSB-1's. The PDP results showed that both ChSB-1 and ChSB-2 inhibitors have anti-corrosion characteristics because heteroatoms caused a protective layer to develop that functioned as mixed-typed inhibitors. The calculated adsorption-free energy ∆G ads o . The ChSB-1 and ChSB-2 inhibitors adsorb on carbon steel in acidic conditions through physisorption and chemisorption interactions, and their adsorption is in line with the Langmuir adsorption model. Inhibited and uninhibited metallic surfaces were subjected to surface morphological assessments using contact angle (CA), the scanning electron microscopy and the energy dispersive X-ray (SEM/EDX) analysis. The DMol -1 . The ChSB-1 and ChSB-2 inhibitors adsorb on carbon steel in acidic conditions through physisorption and chemisorption interactions, and their adsorption is in line with the Langmuir adsorption model. Inhibited and uninhibited metallic surfaces were subjected to surface morphological assessments using contact angle (CA), the scanning electron microscopy and the energy dispersive X-ray (SEM/EDX) analysis. The DMol 3 part of Materials Studio 7.0 software was used to perform the quantum chemical calculations based on DFT to visualize the structural features. Studies from quantum chemistry suggest the possibility of surface interaction between the unoccupied orbitals of the metal surface and the inhibitors ChSB-1, ChSB-2, ChSB-1H + . The results clearly show that the two inhibitors work well as environmentally friendly carbon steel corrosion inhibitors in acidic medium. This could be advantageous for industrial procedures such as pickling, cleaning, acidizing oil drilling in oil wells, and using citrus to de-sediment boilers.+ . The results clearly show that the two inhibitors work well as environmentally friendly carbon steel corrosion inhibitors in acidic medium. This could be advantageous for industrial procedures such as pickling, cleaning, acidizing oil drilling in oil wells, and using citrus to de-sediment boilers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Chitosan grafted with gallic acid (CS-GA), along with CS-GA doped with CeO 2 nanoparticles (CS-GA-CeO 2 ) were synthesized as novel environmentally friendly mild steel corrosion inhibitors. The formation of these derivatives was confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), hydrogen nuclear magnetic resonance spectroscopy ( 1 H NMR), and thermal analysis (TGA). Based on potentiodynamic polarization curves (PDP) measurements, the inhibitors acted primarily as hybrid inhibitors, while following the Langmuir adsorption theory model. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy(XPS) and 3D surface profiles, confirmed that CS-GA-CeO 2 adsorbed on the mild steel forming a protective layer thus preventing the invasion of corrosive media. The corrosion protection mechanism of chitosan derivatives was investigated by molecular dynamics simulations. Electrochemical measurements were used to investigate the corrosion inhibition by CS-GA and CS-GA-CeO 2 on mild steel in a 3.5 % NaCl solution. At room temperature, the highest inhibition efficiency (93.58 %) was achieved at 200 ppm CS-GA-CeO 2 . Modified chitosan nanocomposites were confirmed as promising corrosion inhibitors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study investigates the efficacy of newly synthesized inhibitor with a dual function of corrosion inhibition and biocide for control of microbial influenced corrosion (MIC) in carbon steel API 5LX in the cooling tower water (CTW) environment. Four types of N-substituted tetrabromophthalic inhibitor (N-TBI) were synthesized, and the structural characterization was performed via proton nuclear magnetic resonance spectroscopy, thermogravimetric analysis and high-resolution mass spectrometry. These studies revealed the distinctive optical, thermal, and dielectric properties of the synthesized inhibitors. The corrosion inhibition efficiency has been evaluated by the weight loss (WL) analysis and electrochemical measurements (ECM) and biofilm assay. Biofilm assays and WL showed that inhibitor II exhibited the highest inhibition efficiency 74% and 79% respectively than others. Further ECM showed that the higher charge transfer resistance and the lower corrosion current, suggesting a protective film formed on the metal surface which was due to the adsorption of the N-TBI. Fourier transform infrared spectroscopy confirmed the adsorption of the N-TBI as C-O stretching and C-H bending with the Fe complex. X-ray diffractometer revealed that the presence of inhibitors in the corrosion product (Fe 3 O 4 , Fe 2 O 3 , FeH 2 O 2 , FeS) were highly reduced than the control system. Overall, this study highlighted the potential application of N-TBI with dual function of corrosion inhibition and biocide to control the MIC for carbon steel API 5LX used in the CTW environment., (© 2024. The Author(s).)

A sustainable alternative to conventional concrete involves using recycled aggregates (RA) instead of natural aggregates (NA) and incorporating wheat straw ash (WSA) as a partial replacement for Portland cement. The demand for high-performance concrete (HPC) is rising due to the need for architecturally complex structures and long-span bridges, but HPC's low ductility necessitates reinforcement. Waste tire steel fibers (WTSFs) are gaining popularity for their tensile strength. However, WSA-RA concrete's low early strength is a challenge. Chemical activators like sodium sulfate can enhance early-age strength. This study evaluated the durability and strength of fiber-reinforced concrete with both inactivated and activated WSA. Tests included compressive strength, indirect tensile strength, modulus of rupture (MOR), acid attack resistance, chloride penetration, sorptivity, and water absorption. Activated WSA-RA concrete showed significantly improved early strength. The mixture with 30% RA, 40% WSA, WTSFs, and activator exhibited the highest strength at 90 days. At 60% RA content, activated concrete with 40% WSA and 2.5% WTSFs outperformed the control. Durability was enhanced with a 14-17% reduction in water absorption and sorptivity and a 25.2% decrease in chloride penetration. Acid resistance improved by 26%. X-ray diffraction (XRD) confirmed these findings with elevated hydration product peaks. This study demonstrates that chemical activation of WSA optimizes the engineering properties of WSA-modified HPC with WTSFs and RA, providing a sustainable solution to their challenges., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Althoey et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The interaction of microalgae on the reinforced concrete with corrosion inhibitor is not well understood. Moreover, the inhibition role of microalgae on corrosion has been reported in recent years. In this study, the corrosion inhibition behavior of Q235 carbon steel (CS) due to the presence of Chlorella sp. and benzotriazole (BTA) in alkaline artificial seawater was investigated by means of weight loss, electrochemical measurements including open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization curves, and surface analysis including scanning electron microscopy, energy dispersion spectrometer, and X-ray photoelectron spectroscopy. The results of reduced corrosion rates in the algae-BTA system demonstrated that Chlorella sp. could facilitate the corrosion inhibition efficiency of BTA on the CS specimens. Moreover, polarization measurement showed the algae-BTA system had a mixed-type corrosion inhibition effect. The mechanisms of inhibition were proposed to be the precipitation of iron complexes such as Fe-BTA-EPS and Fe-BTA and iron compounds on the steel surface in the presence of the microalgae and BTA - . This study highlights the application of CS corrosion control by combining biological and chemical approaches that can be used for future research and practice, rather than purely chemical approaches., (© 2024. The Author(s).)

Carbon steel microbiologically influenced corrosion (MIC) by sulfate reducing bacteria (SRB) is known to occur via extracellular electron transfer (EET). A higher biofilm sessile cell count leads to more electrons being harvested for sulfate reduction by SRB in energy production. Metal surface roughness can impact the severity of MIC by SRB because of varied biofilm attachment. C1018 carbon steel coupons (1.2 cm 2 top working surface) polished to 36 grit (4.06 μm roughness which is relatively rough) and 600 grit (0.13 μm) were incubated in enriched artificial seawater inoculated with highly corrosive Desulfovibrio ferrophilus IS5 at 28 ℃ for 7 d and 30 d. It was found that after 7 d of SRB incubation, 36 grit coupons had a 11% higher sessile cell count at (2.0 ± 0.17) × 10 8  cells/cm 2 , 52% higher weight loss at 22.4 ± 5.9 mg/cm 2 (1.48 ± 0.39 mm/a uniform corrosion rate), and 18% higher maximum pit depth at 53 μm compared with 600 grit coupons. However, after 30 d, the differences diminished. Electrochemical tests with transient information supported the weight loss data trends. This work suggests that a rougher surface facilitates initial biofilm establishment but provides no long-term advantage for increased biofilm growth., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Desiccation-induced cracks in a compacted clay liner significantly deteriorate the hydraulic barrier performance of landfill covers. The present study explores the effects of polypropylene (PP) fiber reinforcement on the hydrological response and crack resistance of compacted steel slag (SS; 90 wt%) - bentonite (10 wt%) mixtures under drying and wetting cycles. Comprehensive tests were conducted to explore the impact of different fiber lengths (6-12 mm) and contents (0-0.4 % wt.%), including hydraulic conductivity tests for measuring the saturated hydraulic conductivity (k s ), unconfined-penetration tests for measuring the tensile strength, small-sized plate tests for quantifying crack development, and large-sized bucket tests for studying the hydrological response and crack characteristics. Higher fiber contents and longer fiber lengths increased the k s -value of the specimens. For a 0.3 % fiber content, the tensile strength peaked for the 9-mm fiber. Consistently, the specimen reinforced with the 9-mm fibers exhibited significantly fewer cracks than those reinforced with the 6-mm and 12-mm fibers. It was because the 6-mm fibers had a shorter anchorage length, while the 12-mm fibers tended to agglomerate. The large-sized bucket tests showed that fiber reinforcement limited crack development significantly under wetting and drying cycles, reducing the rainfall infiltration by 40 % and enhancing the soil water retention capacity. Finally, a 0.3 wt% of 9-mm PP was recommended to reinforce the compacted SS-bentonite mixtures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The iron and steel-making industries have garnered significant attention in research related to low-carbon transitions and the reuse of steel slag. This industry is known for its high carbon emissions and the substantial amount of steel slag it generates. To address these challenges, a waste heat recovery process route has been developed for molten steel slag, which integrates CO 2 capture and fixation as well as efficient utilization of steel slag. This process involves the use of lime kiln flue gas from the steel plant as the gas quenching agent, thereby mitigating carbon emissions and facilitating carbonation conversion of steel slag while simultaneously recovering waste heat. The established carbonation model of steel slag reveals that the insufficient diffusion of CO 2 gas molecules within the product layer is the underlying mechanism hindering the carbonation performance of steel slag. This finding forms the basis for enhancing the carbonation performance of steel slag. The results of Aspen Plus simulation indicate that 1 t of steel slag (with a carbonation conversion rate of 15.169 %) can fix 55.19 kg of CO 2 , process 6.08 kmol of flue gas (with a carbon capture rate of 92.733 %), and recover 2.04 GJ of heat, 0.43 GJ of exergy, and 0.68 MWh of operating cost. These findings contribute to the development of sustainable and efficient solutions for steel slag management, with potential applications in the steel production industry and other relevant fields., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In the present study the authors' main goal is to avoid the corrosive attack of the chloride ions of 3.5% NaCl solution in saline medium on the mild steel (MS), by addition of small amount of a new derivative of the hydrazide called ligand (HL), as a corrosion inhibitor. This study had been achieved by employing different electrochemical measurements such as, open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and potentio-dynamic polarization (PDP) methods. The results of the electrochemical test (OCP), showed that, the open circuit potential of the mild steel in saline solution, was guided to more positive direction in presence of the ligand (HL), at its ideal concentration (1 × 10 -3  M), compared to the (OCP), of the mild steel in absence of (HL). The results of the electrochemical methods, EIS and PDP presented that, the ligand (HL), was acted as a good corrosion inhibitor for hindering the corrosion process of the mild steel in 3.5% sodium chloride, as it was recorded a good percentage of the inhibition efficiency (77.45%, 53.41%, by EIS and PDP techniques respectively), at its optimum concentration (1 × 10 -3  M). Also, the corrosion rate of the mild steel in the saline medium without (HL), was listed about (0.0017 mm/year), while in existence of (HL), was decreased to a value about (0.00061 mm/year). As well, some of electrical properties of (HL), and its derivative [Pd(II), Cr(III), and Ru(III)], complexes were investigated such as; the activation energy (E a(ac) ), which recorded values in the range of 0.02-0.44 (eV) range and electrical conductivity which listed values at room temperature in the range of 10 -5 -10 -8  S.cm -1 . The results of the AC and DC electrical conductivity measurements for (HL), and its derivative [Pd(II), Cr(III) and Ru(III)] complexes indicate semiconducting nature which suggests that these compounds could be used in electronic devices. Also, the complexes exhibited higher conductivity values than (HL). Photophysical studies showed good florescence properties of HL that indicated that it can be used to determine most of the drugs with no fluorescence properties by quenching and calculating quantum yield. Moreover, the hydrazide ligand (HL), has shown selectivity as an active anticancer candidate drug for both breast and colon cancer in humans. Density function theory demonstrated that, the frontier molecular orbital HOMOs of the complexes have exhibited similar behavior and the charge density has localized in the metallic region of all the studied complexes. Also, the values of the energy gap of the ligand (HL), and its complexes Pd(II), Cr(III) and Ru(III), had been arranged in this order HL > Cr(III) > Ru(III) > Pd(II). All characterization using different spectroscopic techniques were reported to elucidate the proposed structures such as; thermal analysis, elemental analysis of C, H, and N atoms, spectral analysis using IR, UV, 1 H NMR techniques, scanning electron microscopy and energy dispersive X-ray analyses., (© 2024. The Author(s).)

Textile industries stand out as one of the main polluters of water resources, generating large amounts of liquid effluents with variable composition and intense coloration. The objective of this work is the integration of the reductive process using commercial steel wool, combined with oxidative processes, in the treatment of textile effluent. The effect of the variables of the reductive process were studied using a 32 factorial design. After 30 minutes, the reductive process allowed a reduction of 68% COD, 46% TOC, 62% true color and 72% of total phenols, but showed an increase in color apparent and turbidity, due to the iron species formed by the oxidation of steel wool during the process. With the combined process using sunlight, the reduction was 73% COD, 50% TOC, 97% phenols, 93% true color and 48% apparent color. With artificial light, the reduction was 94% COD, 63% TOC, 95% phenols, 98% true color and 65% apparent color. The evaluation of the acute toxicity against Daphnia magna indicated that after the proposed treatments, the effluent did not present toxicity or the toxicity was reduced. It is concluded that the combined process can be considered an efficient alternative for the treatment of textile effluent.

Sensor array methods have received much attention in recent years. In this study, a colorimetric sensor array consisting of three kinds of steel slag-based composites (including porphyrin-functionalized non-magnetic steel slag (NMSS-Por), alkali-excited steel slag (A-SS), and platinum modified steel slag (ALANH-Pt)) was developed for the detection and recognition of tetracycline antibiotics (TCs) such as tetracycline (TC), oxytetracycline (OTC) and doxycycline (DOX). Linear discriminant analysis (LDA) and hierarchical cluster analysis (HCA) showed that the colorimetric sensor array has excellent recognition ability for TCs. The detection limits of this sensor array for TC, OTC, and DOX were 0.059 μM, 0.111 μM and 0.118 μM, respectively, which provided higher sensitivity compared to the colorimetric sensors composed of a single steel slag-based composite material. At the same time, the array sensor has anti-interference ability, and this study provides a new application route for steel slag.

To investigate the effect of steel slag used as substrate on the rooting of Hydrangea macrophylla cuttings, and to develop a new mixed substrate that can partially replace conventional cutting substrates and realize the high-efficient utilization of solid waste, we examined the physical and chemical properties of different mixed substrates containing 10% (T 1 ), 20% (T 2 ), 30% (T 3 ), and 40% (T 4 ) volume fractions of steel slag, and investigated the rooting of H. macrophylla 'Red Beauty' cuttings growing on these substrates, with conventional cutting substrates (peat and perlite) as the control (CK). The results showed that pH value, electrical conductivity, and bulk density of the mixed substrates were significantly higher than those of CK. The aeration porosity of T 2 was higher than other treatments, while the total porosity and water holding porosity differed little from others. Both fresh weight and dry weight of all the four treatments were higher than those of CK, with stem diameter being higher than that of CK (except T 4 ), plant height showing no significant difference compared to CK (except T 4 ), and leaf chlorophyll content being significantly lower than CK. Root length ranked as T 2 >CK>T 1 >T 3 >T 4 , the root surface area and root volume both ranked as T 2 >T 1 >CK>T 4 >T 3 , the root tip ranked as T 2 >CK>T 1 >T 4 >T 3 . Both average root diameter and root activity were significantly higher than that of CK, with the highest value being observed in T 2 . Soluble sugar content in the leaves of T 2 was the highest, followed by T 4 , T 3 , CK, and T 1 . The weight ranking of root growth indices was root activity > average root diameter > root volume > root surface area > root tip number > root length. Redundancy analysis indicated that pH value, electrical conductivity, aeration porosity, and water holding porosity of substrates were key factors influencing root growth and development of cuttings. Our results suggested that substrates mixed with 10% to 40% steel slag could be used for H. macrophylla cutting propagation, and 20% (T 2 ) being the best one because it could significantly improve the survival rate, growth status, and root development of cuttings. Steel slag would be a novel substrate to partially replace conventional unrenewable substrates such as peat and perlite for flower seedling propagation, which could reduce agricultural production cost and provide a high-value utilization way of industry solid waste.

To characterize the source and effects of bacterial communities on corrosion of intertidal structures, three different UK coastal sites were sampled for corrosion materials, sediment and seawater. Chemical analyses indicate the activity of sulfate-reducing microbes (SRBs) at 2 sites (Shoreham and Newhaven), but not at the third (Southend-on-Sea). Microbial communities in the deep sediment and corrosion samples are similar. The phylum Proteobacteria is dominant (40.4% of the total ASV), followed by Campilobacterota (11.3%), Desulfobacterota and Firmicutes (4%-5%). At lower taxonomic levels, corrosion causing bacteria, such as Shewanella sp. (6%), Colwellia sp. (7%) and Mariprofundus sp. (1%), are present. At Southend-on-sea, the relative abundance of Campilobacterota is higher compared to the other two sites. The mechanism of action of microorganisms at Shoreham and Newhaven involves biogenic sulfuric acid corrosion of iron by the combined action of SRBs and sulfur-oxidizing microbes. However, at Southend-on-sea, sulfur compounds are not implicated in corrosion, but SRBs and other electroactive microbes may play a role in which cathodic reactions (electrical MIC) and microbial enzymes (chemical MIC) are involved. To contribute to diagnosis of accelerated intertidal corrosion types, we developed a rapid identification method for SRBs using quantitative polymerase chain reaction high-resolution melt curve analysis of the dsrB gene., (© 2024 The Author(s). Environmental Microbiology Reports published by John Wiley & Sons Ltd.)

The fluctuating water-line corrosion of EH40 steel in sterile and biotic media was investigated with a wire beam electrode. When the coupons were partially immersed in the sterile medium, the position of the low water-line acted as the cathodic zone and the area below the low water-line constantly served as the main anodic zone. The thin electrolyte layers with uneven thickness promoted the galvanic current of the region below the low water-line. Different from the sterile environment, the metabolism of Halomonas titanica with oxygen as the final electron acceptor reduced the dissolved oxygen concentration, which resulted in the position of the low water-line acting as the anodic zone., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Anaerobic digestion for flexible biogas production can lead to digestion inhibition under high shock loads. While steel slag addition has shown promise in enhancing system buffering, its limitations necessitate innovation. This study synthesized the nitrogen-doped activated carbon composite from steel slag to mitigate intermediate product accumulation during flexible biogas production. Material characterization preceded experiments introducing the composite into anaerobic digestion systems, evaluating its impact on methane production efficiency under hydraulic and concentration sudden shocks. Mechanistic insights were derived from microbial community and metagenomic analyses, facilitating the construction of the modified Anaerobic Digestion Model No. 1 (ADM1) to quantitatively assess the material's effects. Results indicate superior resistance to concentration shocks with substantial increment of methane production rate up to 33.45% compared with control group, which is mediated by direct interspecies electron transfer, though diminishing with increasing shock intensity. This study contributes theoretical foundations for stable flexible biogas production and offers an effective predictive tool for conductor material reinforcement processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In the present work, Verbena Officinalis (VO) leaf extract was used as potential corrosion inhibitor for the corrosion of carbon steel (CS) in 0.5 M H 2 SO 4 medium. Further, the corrosion inhibiting nature of VO leaf extract towards the CS was evaluated using mass loss (ML), potentiodynamic polarization (PDP), electrical impedance spectroscopy (EIS) and surface morphological analyses using atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS) techniques. Calculation of activation energy E a ∗ using Arrhenius equation shows the increase in activation energy when adding the VO leaf extract in 0.5 M H 2 SO 4 medium and the maximum activation energy ( E a ∗  = 49.9 kJ mol -1 ) was observed for 1000 mg L -1 VO leaf extract in acid medium. The negative free energy values suggested the spontaneous and the stability of the adsorbed layer of VO leaf extract on the CS surface. Using EIS measurements, high percent inhibitory effectiveness of 91.1% for 1000 ppm solutions was achieved. With an increase in VO leaf extract dose, the double layer capacitance (C dl ) values fall while the values of charge transfer (R ct ) increase. This showed that a protective layer of VO leaf extract on CS surface was formed. The polarization curves showed that the VO leaf extract acts as a mixed-type inhibitor. It is discovered that the adsorption of VO leaf extract molecules adhering to the CS surface followed the Langmuir isotherm. The anti-corrosion action of VO leaf extract is fully demonstrated by some surface techniques., (© 2024. The Author(s).)

Microorganisms in the waterline zone can secrete pigments to avoid damage caused by ultraviolet radiation, some of which have corrosive effects. In this work, we found that the secretion of pyomelanin by P3 strain of Pseudoalteromonas lipolytica significantly increases under strong lighting conditions, accelerating the corrosion of the material. Molecular mechanisms indicate that strong light, as a stressful environmental factor, enhances the expression of melanin secretion-related genes to prevent bacteria from being damaged by ultraviolet radiation. Therefore, this work proposes a new corrosion mechanism in the waterline zone, pigment-producing microorganisms are also involved in the waterline corrosion process., Competing Interests: Declaration of competing interest All authors declare no financial or personal relationships that may be perceived as influencing our work., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The corrosion behavior of carbon steel under the coexistence of carbon dioxide and SRB was studied by means of corrosion weight loss, SEM, EDS, in situ pH test, and other methods. The results showed that Chloride ions, temperature, pH, and oxygen coexist with iron bacteria will affect the corrosion under the coexistence of CO 2 and SRB, and SRB tends to grow in a favorable environment for itself, and the corrosion rate of X52N at 42 days is slightly higher than that at 21 days. However, the pitting depth increased sharply from 21.20 µm in 21 days to 39.79 µm in 42 days. So that the corrosion can be divided into two stages. First, SRB catalyze the dissolution of FeCO 3 , leading to local uniform corrosion. Second, SRB directly obtain electrons from the metal surface, resulting in local pitting. In addition, the environment under the stable mineralized biofilm was found to be slightly alkaline., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Most microbiologically influenced corrosion (MIC) studies focus on the threat of pinhole leaks caused by MIC pitting. However, microbes can also lead to structural failures. Tetrakis hydroxymethyl phosphonium sulfate (THPS) biocide mitigated the microbial degradation of mechanical properties of X80 steel pipeline by Desulfovibrio ferrophilus (IS5 strain), a very corrosive sulfate reducing bacterium. It was found that 100 ppm (w/w) THPS added to the enriched artificial seawater (EASW) culture medium before incubation resulted in 2.8-log reduction in sessile cell count after a 7-d incubation at 28 °C under anaerobic conditions, leading to 94% uniform corrosion rate reduction (from 1.3 to 0.07 mm/a), and 84% pitting corrosion rate reduction (from 0.70 to 0.11 mm/a). The X80 dogbone coupon incubated with 100 ppm THPS for 7 d suffered 3% loss in ultimate tensile strain and 0% loss in ultimate tensile strength compared with the abiotic control in EASW. In comparison, the no-treatment X80 dogbone coupon suffered losses of 13% in ultimate tensile strain and 6% in ultimate tensile stress, demonstrating very good THPS efficacy., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

The present study focuses on an environmental approach based on the use of an eco-friendly corrosion inhibitor from the Citrullus colocynthis fruit extract for enhancement corrosion resistance of carbon steel (C-S) in acid medium as an alternative to various organic and non-organic chemical inhibitors. The evaluation of the inhibition properties of the fruit methanolic extract of Citrullus colocynthis (CCE) were performed in molar hydrochloric acid (1 M HCl) medium using gravimetric and electrochemical (potentiodynamic polarization and AC impedance) techniques as well as surface analyses. CCE is rich in amino acids, mainly citrulline and β-(pyrazo-1-yl)-L-analine molecules. Based on the weight loss evaluation, the results demonstrated that this plant extract acts as an effective corrosion inhibitor and a protection level of 93.6% was attained at 500 ppm of CCE after 6 h of metal exposure at 303 K. According to polarization curves, CCE functions as a mixed-type inhibitor. In addition, AC impedance analyses have shown that the incorporation of CCE into the corrosive solution leads to a decrease in load capacity, while improving the charge/discharge function at the interface. This suggests the possibility of the formation of an adsorbed layer on the C-S surface. In addition, scanning electron microscope (SEM) observation, contact angle measurements, and Fourier-transform infrared spectroscopy (FTIR) analyses supported the development of a protective film over CS substrate surface afterwards addition of CCE. Langmuir and/or Temkin isotherms can be used to characterize the adsorption of this organic inhibitor on the C-S surface. X-ray photoelectron spectroscopy (XPS) has revealed that the inhibiting effect of CCE on the corrosion of C-S in 1 M HCl solution is mainly controlled by a chemisorption process and the inhibitive layer is composed of an iron oxide/hydroxide mixture where CCE molecules are incorporated. In order to understand the relationship between the molecular structure and anti-corrosion effectiveness of these inhibitor molecules, quantum chemical studies were carried out using density functional theory (DFT) and molecular dynamics (MD) simulation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Steel mill wastewater sludge, as an iron-enriched solid waste, was expected to be converted into iron-enriched biochar with acceptable environmental risk by pyrolysis. The purpose of our study was to evaluate the chemical speciation transformation of heavy metals in biochar under various pyrolysis temperatures and its reutilization for tetracycline (TC) removal. The experimental data indicated that pyrolysis temperature was a key factor affecting the heavy metals speciation and bioavailability in biochar, and biochar with pyrolysis temperature at 450 °C was the most feasible for reutilization without potential risk. The endogenous iron-enriched biochar (FSB450) showed highly efficient adsorption towards TC, and its maximum adsorption capacity could reach 240.38 mg g -1 , which should be attributed to its excellent mesoporous structure, abundant functional groups and endogenous iron cycling. The endogenous iron was converted to a stable iron oxide crystalline phase (Fe 3 O 4 and MgFe 2 O 4 ) by pyrolysis, which underwent a valence transition to form a coordination complex with TC by electron shuttling in the FSB450 matrix. The study provides a win-win approach for resource utilization of steel wastewater sludge and treatment of antibiotic contamination in wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Heavy carbon industries produce solid side stream materials that contain inorganic chemicals like Ca, Na, or Mg, and other metals such as Fe or Al. These inorganic compounds usually react efficiently with CO 2 to form stable carbonates. Therefore, using these side streams instead of virgin chemicals to capture CO 2 is an appealing approach to reduce CO 2 emissions. Herein, we performed an experimental study of the mineral carbonation potential of three industrial steel slags via aqueous, direct carbonation. To this end, we studied the absorption capacities, reaction yields, and physicochemical characteristics of the carbonated samples. The absorption capacities and the reaction yields were analyzed through experiments carried out in a reactor specifically designed to work without external stirring. As for the physicochemical characterization, we used solid-state Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Using this reactor, the absorption capacities were between 5.8 and 35.3 g/L and reaction yields were in the range of 81-211 kg CO 2 /ton of slag. The physicochemical characterization of the solid products with solid FTIR, XRD and SEM indicated the presence of CaCO 3 . This suggests that there is potential to use the carbonated products in commercial applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

This study evaluated Aloe vera extract as a green inhibitor to prevent corrosion in seawater environments. A. vera extract was produced by maceration with methanol-water at room temperature. Electrochemical techniques were used to evaluate the corrosion inhibitor effectiveness of the A. vera extract. The morphology of the corrosion products was analyzed by FE-SEM equipped with EDS and AFM. FT-IR and LCMS characterized the functional and structural groups in this extract. The electrochemical measurements show that A. vera extract could effectively reduce the corrosion of API 5L steel in seawater environments. Inhibition efficiency (IE) increases with increasing concentration. Optimal corrosion inhibition efficiency of around 83.75% (PDP) and 88.60% (EIS) was obtained by adding 300 mg L -1 of extract at 310 K. Furthermore, the higher the concentration of A. vera extract, the greater the activation energy (E a ), with the highest activation energy being 48.24 kJ mol -1 for the concentration of 300 mg L -1 . Conversely, increasing the temperature and exposure duration reduces the corrosion inhibition efficiency (IE) values; the best exposure period was 30 min with 88.34% IE by a concentration of 300 mg L -1 at 300 K. This corrosion inhibition is achieved by the adsorption process of A. vera bioactive on metal surfaces with a mixed inhibitor through a physisorption-chemisorption mechanism. This finding was confirmed by the smoother surface morphology of the steel treated with A. vera extract than without. This unveiling investigation found that A. vera extract has the potential to be an environmentally friendly corrosion inhibitor in the seawater environment., (© 2024. The Author(s).)

The purpose of this study is to evaluate the corrosion resistance in natural seawater (Năvodari area) of two types of low-alloy carbon steels BVDH36 and LRAH36 by electrochemical methods. The electrochemical methods used were the evolution of the free potential (OCP), electrochemical impedance spectroscopy (EIS), polarization resistance (R p ) and corrosion rate (V corr ), potentiodynamic polarization (PD), and cyclic voltammetry (CV). The studies were completed by ex situ characterization analyzes of the studied surfaces before and after corrosion such as: optical microscopy, scanning electron microscopy and X-ray diffraction analysis. The results of the study show us that the polarization resistance of the low-alloy carbon steel BVDH36 is higher compared to the polarization resistance of the low-alloy carbon steel LRAH36. It is also observed that with the increase in the immersion time of the samples in natural seawater, the polarization resistance of the BVDH36 alloy increases over time and finally decreases, and for the carbon steel LRAH36 the polarization resistance increases.

MALDI-TOF MS identifications of microorganisms in a clinical laboratory were investigated, comparing steel targets with MBT Biotargets. By using MBT Biotargets, the score values of yeast identifications increased, whereas the score values of Gram-negative bacteria decreased. Switching to MBT Biotargets did not negatively impact overall frequencies of high confidence identifications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

The issue of material failure attributed to microbiologically influenced corrosion (MIC) is escalating in seriousness. Microorganisms not only facilitate corrosion but certain beneficial microorganisms also impede its occurrence. This study explored the impact of marine B. velezensis on the corrosion behavior of X65 steel in simulated offshore oilfield produced water. B. velezensis exhibited rapid growth in the initial stages, and the organic acid metabolites were found to promote corrosion. Subsequently, there was an increase in cross-linked "networked" biofilms products, a significant rise in the prismatic shape of corrosion products, and a tendency for continuous development in the middle and late stages. The organic/inorganic mineralized film layer formed on the surface remained consistently complete. Metabolic products of amino acid corrosion inhibitors were also observed to be adsorbed into the film. B. velezensis altered the kinetics of the X65 steel cathodic reaction, resulting in a deceleration of the electrochemical reaction rate. The mineralization induced by B. velezensis effectively slowed down the corrosion rate of X65 steel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The microbiologically influenced corrosion inhibition (MICI) of Q235 carbon steel by Shewanella putrefaciens and mediated calcium deposition were investigated by regulating microbial mineralization. In a calcium-rich medium, S. putrefaciens rapidly created a protective calcium carbonate layer on the steel surface, which blocked Cl - diffusion. Without calcium, the biofilm and rust layer mitigated pitting corrosion but did not prevent Cl - penetration. Potentiodynamic polarization results indicated that the current densities (i corr values) of the corrosion produced in the S. putrefaciens-inoculated media with and without calcium were 0.4 μA/cm 2 and 0.6 μA/cm 2 , respectively. Similarly, compared with those under sterile conditions, the corrosion inhibition rates were 92.2% and 87.4% higher, respectively. Electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) confirmed that the MICI was caused by the combination of microbial aerobic respiration and the deposited layers. Even under nonbiological conditions, S. putrefaciens-induced calcium carbonate deposition inhibited corrosion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Natural gums due to availability, multifunctionality, and nontoxicity are multifaceted in application. In corrosion inhibition applications, their performance, in unmodified form is unsatisfactory because of high hydration rate, solubility issues, algal and microbial contamination, as well as thermal instability. This work attempts to enhance the inhibitive performance of Berlinia grandiflora (BEG) and cashew (CEG) exudate gums through various modification approaches. The potential of biogenic BEG and CEG gums-silver (Ag) nanocomposites (NCPs) for corrosion inhibition of mild steel in 1 M HCl is studied. The nanocomposites were characterized using the FTIR, UV-vis, and TEM techniques. The corrosion studies through the gravimetric and electrochemical (PDP, EIS, LPR, and EFM) analyses reveal moderate inhibition performance by the nanocomposites. Furthermore, the PDP results reveal that both inhibitors are mixed-type with maximum corrosion inhibition efficiencies (IEs) of 61.2 % and 54.2 % for BEG-Ag NCP and CEG-Ag NCP, respectively at an optimum concentration of 1.0 %. Modification of these inhibitors with iodide ion (KI) significantly increased the IE values to 90.1 % and 88.5 % for BEG-Ag NCP and CEG-Ag NCP at the same concentration. Surface observation of the uninhibited and inhibited steel samples using SEM/EDAX, 3D Surface profilometer, and AFM affirm that the modified nanocomposites are highly effective., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Owing to the effects of seawater erosion, dry/wet cycles, dissolved oxygen and microorganisms, the corrosion of steel in marine tidal environments is a serious threat to the safe and stable operation of marine equipment and facilities. Among them, microbiologically influenced corrosion (MIC) of steel has received increasing attention. Cathodic protection (CP) is frequently used to control the corrosion of offshore steel structures. However, in the presence of microorganisms, implementation of CP and its specific effects remain controversial. In this study, the influence of Pseudomonas sp. on the CP efficiency of Zn sacrificial anodes (ZnSAs) during the tidal corrosion of X80 steel was studied. The results showed that CP efficiency exceeded 92% in an abiotic tidal environment. However, in the biotic tidal environment, Pseudomonas sp. significantly reduced the CP efficiency. Pseudomonas sp. and its biofilm promoted the corrosion of steel under CP, inhibited the formation of a complete calcareous deposit layer, which weakened the CP efficiency of ZnSA in the marine tidal environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study explores the impacts of neem oil biodiesel (BD), which was produced and characterized using GC-MS, FTIR, and UV-Vis spectroscopic techniques to elucidate pure and corrosion-product neem oil BD at room temperature (25 °C) and different immersion durations of 0, 28, 42, and 56 days. The OM and SEM were also employed to study the surface, structural integrity, and interphase interaction between the BD and the carbon steel (C1020) before and after immersion for different durations. The dominant fatty acid (FA) group in both pure and corrosion-product neem oil BD was C 18 , with a total composition of 72.3 %, hence determining the nature of the BD interaction with the carbon steel. The study revealed that carbon steel (C1020) was susceptible to attacks by neem oil BD, and the duration of immersion had substantial influence on the surface morphology and structural integrity of the steel. It is therefore anticipated that this study will significantly advance the field of alternative fuel research., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lifting-correction is a technique to restore buildings experiencing uneven settlement, while ensuring the safety and integrity of the main structural system. This study was based on a real light-steel building structure and provided a detailed description of scenarios involving uneven settlement and the process of lifting and correction. Additionally, a sophisticated finite element (FE) model was established using the generic FE software ABAQUS, with refined material constitutive models to ensure the accuracy of simulation results. Firstly, the impact of uneven settlement on the structure was examined, including modal and stress field analyses. Different methods of breaking column (BC) and lifting column (LC) were compared and scrutinized to identify optimal approaches and minimize damage and disturbance to the building. Four methods have been proposed and compared, including simultaneously breaking columns, breaking columns with chessboard style, simultaneously lifting columns and lifting columns in multiple stages. The four methods were comprehensively evaluated from the perspectives of stress fields, displacement responses, damage and energy dissipation. The results indicated that after uneven settlement, the eigenvalues and frequencies of the structure decrease, the structure tended to be unstable. Simultaneously, as stress increases, some joints' materials enter the yielding stage, affecting the overall structural stability and safety. When damage occurs in some joints, the structural safety was compromised. The comparison between the two BC methods, including the chessboard style and simultaneously BC methods, it was revealed that the former causes less disturbance to structural initial stress field. The comparison between the two LC methods, including, simultaneously and LC in multiple stages, it was revealed that the latter performs slightly better in terms of stress fields, displacement fields, damage, energy dissipation and internal forces. Therefore, the methods of BC in chessboard style and LC in multiple stages were recommended to use in engineering practice to ensure less structural disturbance. The findings obtained from this study can provide guidance for structural engineers to solve the uneven settlement of buildings., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Chen et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Electroless nickel plating is a suitable technology for the hydrogen industry because electroless nickel can be mass-produced at a low cost. Investigating in a complex environment where hydrogen permeation and friction/wear work simultaneously is necessary to apply it to hydrogen valves for hydrogen fuel cell vehicles. In this research, the effects of hydrogen permeation on the mechanical characteristics of electroless nickel-plated free-cutting steel (SUM 24L) were investigated. Due to the inherent characteristics of electroless nickel plating, the damage (cracks and delamination of grain) and micro-particles by hydrogen permeation were clearly observed at the grain boundaries and triple junctions. In particular, the cracks grew from grain boundary toward the intergranualr. This is because the grain boundaries and triple junctions are hydrogen permeation pathways and increasing area of the hydrogen partial pressure. As a result, its surface roughness increased by a maximum of two times, and its hardness and adhesion strength decreased by hydrogen permeation. In particular, hydrogen permeation increased the friction coefficient of the electroless nickel-plated layer, and the damage caused by adhesive wear was significantly greater, increasing the wear depth by up to 5.7 times. This is believed to be due to the decreasing in wear resistance of the electroless nickel plating layer damaged by hydrogen permeation. Nevertheless, the Vickers hardness and the friction coefficient of the electroless nickel plating layer were improved by about 3 and 5.6 times, respectively, compared with those of the free-cutting steel. In particular, the electroless nickel-plated specimens with hydrogen embrittlement exhibited significantly better mechanical characteristics and wear resistance than the free-cutting steel., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Shin, Kim. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Steel cord materials were found to have internal porous microstructures and complex fluid flow properties. However, current studies have rarely reported the transport behavior of steel cord materials from a microscopic viewpoint. The computed tomography (CT) scanning technology and lattice Boltzmann method (LBM) were used in this study to reconstruct and compare the real three-dimensional (3D) pore structures and fluid flow in the original and tensile (by loading 800 N force) steel cord samples. The pore-scale LBM results showed that fluid velocities increased as displacement differential pressure increased in both the original and tensile steel cord samples, but with two different critical values of 3.3273 Pa and 2.6122 Pa, respectively. The original steel cord sample had higher maximal and average seepage velocities at the 1/2 sections of 3D construction images than the tensile steel cord sample. These phenomena should be attributed to the fact that when the original steel cord sample was stretched, its porosity decreased, pore radius increased, flow channel connectivity improved, and thus flow velocity increased. Moreover, when the internal porosity of tensile steel cord sample was increased by 1 time, lead the maximum velocity to increase by 1.52 times, and the average velocity was increased by 1.66 times. Furthermore, when the density range was determined to be 0-38, the pore phase showed the best consistency with the segmentation area. Depending on the Zou-He Boundary and Regularized Boundary, the relative error of simulated average velocities was only 0.2602 percent., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Zhao et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The present research demonstrates an innovative investigation of environmentally friendly mild steel (M-steel) corrosion inhibition using the artemisia stems aqueous extract (ASAEx) as an inhibitor in hydrochloric acid 1 M. The standard extraction technique of hydrodistillation was used for producing the aqueous solutions of ASAEx. To assess the ratios of the chemical components, phytochemical screening was used to identify the stems of this plant. We used a variety of methods and techniques in our research on corrosion inhibition, including weight loss measures, surface analysis methods like XPS and SEM/EDS, electrochemical testing like PDP and EIS, as well as computational lead compound evaluation. Maximum inhibitory efficacy was achieved with 400 mg/L ASAEx in 1 M HCl at 303 K, i.e. 90%. The PDP investigation verified the mixed-kind inhibitor status of the ASAEx extract. To describe the surface of M-steel, fitting and synthetic data were used to identify a constant phase element (CPE). SEM surface analysis was also used to detect the ASAEx effect on the surface of M-steel. X-ray photoelectron spectroscopy (XPS) analysis shows the presence of trace molecules of ASAEx on M-steel surface characterizing the bands in Maj-ASAEx (major compound of ASAEx). Density functional theory (DFT) and molecular dynamics simulations (MDs) were used in computational chemistry to clarify the adsorption mechanism and inhibitory impact., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Herein, a novel chitosan Schiff base (CS-FGA) as a sustainable corrosion inhibitor has been successfully synthesized via a simple amidation reaction by using an imidazolium zwitterion and chitosan (CS). The corrosion inhibition property of CS-FGA for mild steel (MS) in a 1.0 M HCl solution was studied by various electrochemical tests and physical characterization methods. The findings indicate that the maximum inhibition efficiency of CS-FGA as a mixed-type inhibitor for MS in 1.0 M HCl solution with 400 mg L -1 reaches 97.6 %, much much higher than the CS and the recently reported chitosan-based inhibitors. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle (WCA) results reveal that the CS-FGA molecules firmly adsorb on the MS surface to form a protective layer. The adsorption of CS-FGA on the MS surface belongs to the Langmuir adsorption isotherm containing both the physisorption and chemisorption. According to the X-ray photoelectron spectroscopy (XPS) and UV-vis spectrum, FeN bonds presented on the MS surface further prove the chemisorption between CS-FGA and Fe to generate the stable protective layer. Additionally, theoretical calculations from quantum chemical calculation (DFT) and molecular simulations (MD) were performed to reveal the inhibition mechanism of CS-FGA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Two green inhibitors extracted from an endemic species (Origanum grosii (Og)) using two solvents of different polarity (water and ethanol), OgW (aqueous extract) and OgE (ethanolic extract), were used for the anticorrosion of mild steel (M steel) in a 1 M HCl medium. Anticorrosive performance of OgW and OgE was assessed using standard electrochemical techniques, EIS/PDP measurements, weight loss method and SEM/EDX surface analysis. The results show that OgW achieves a maximum inhibition efficiency of 92 % and that the extract in aqueous medium (more polar) is more efficient than the extract in ethanolic medium (less polar). Both extracts act as mixed inhibitors and their corrosion process is predominantly governed by a charge transfer. Concentration and temperature effect was studied and shown that they are two antagonistic parameters for the evolution of inhibitory effectiveness of both OgW and OgE. The adsorption isotherms of the two inhibitors OgE and OgW obey to the Langmuir adsorption model. Moreover, the examination of SEM images and EDX spectra support a deposit of both extracts on the metal surface by an adsorption phenomenon. Besides, theoretical approach of the molecular structures of the major compounds M-OgW and M-OgE and inhibition efficiency was examined via DFT calculations and molecular dynamics simulations and it was consistent with the experimental findings., (© 2024 Wiley-VHCA AG.)

Removal of dissolved zinc (Zn) from water by a novel alkali-activated material (AAM) prepared from steel industry slags in a fixed-bed column was investigated. Design of experiments was used to find the optimum operation parameters [flow rate ( Q ) , adsorbent mass, ( m ads ), and initial Zn concentration ( C 0 )] for the removal of Zn 2+ from a ZnCl 2 solution. Regression models for the breakthrough ( q b ), and saturation ( q sat ) capacities of the bed and three other response parameters as functions of Q , m ads and C 0 were fitted with coefficients of determination ( R 2 ) ranging from 0.48 to 0.99. Experimental values of q b and q sat varied within 1.42-7.03 mg Zn/g and 10.57-17.25 mg Zn/g, respectively. The optimum operation parameters were determined to be Q = 1.64 ml/min and m ads = 4.5 g, whereas C 0 had negligible effect on the response parameters in the range 73-107 mg Zn/l. Finally, three empirical breakthrough curve (BTC) models were employed to describe the individual BTCs of which the modified dose - response model was found to give the best fit (0.960 ≤ R 2 ≤ 0.998). The results of the present work demonstrate that the novel AAM has considerable potential to be utilized in water purification applications.

This first study investigated the presence of dioxins and furans in river sediments around a craft village in Vietnam, focusing on Secondary Steel Recycling. Sediment samples were collected from various locations along the riverbed near the Da Hoi Secondary Steel Recycling village in Bac Ninh province. The analysis was conducted using a HRGC/HRMS-DFS device, detecting a total of 17 dioxin/furan isomers in all samples, with an average total concentration of 288.86 ng/kg d.w. The concentrations of dioxin/furan congeners showed minimal variation among sediment samples, ranging from 253.9 to 344.2 ng/kg d.w. The predominant compounds in the dioxin group were OCDD, while in the furan group, they were 1,2,3,4,6,7,8-HpCDF and OCDF. The chlorine content in the molecule appeared to be closely related to the concentration of dioxins and their percentage distribution. However, the levels of furan isomers did not vary significantly. The distribution of these compounds was not dependent on the flow direction, as they were mainly found in solid waste and are not water-soluble. Although the hepta and octa congeners had high concentrations, when converted to TEQ values, the tetra and penta groups (for dioxins) and the penta and hexa groups (for furans) contributed more to toxicity. Furthermore, the source of dioxins in sediments at Da Hoi does not only originate from steel recycling production activities but also from other combustion sites. The average total toxicity was 10.92 ng TEQ/kg d.w, ranging from 4.99 to 17.88 ng TEQ/kg d.w, which did not exceed the threshold specified in QCVN 43:2017/BTNMT, the National Technical Regulation on Sediment Quality. Nonetheless, these levels are still concerning. The presence of these toxic substances not only impacts aquatic organisms in the sampled water environment but also poses potential health risks to residents living nearby.

A mechanical device inspired by the pistol shrimp snapper claw was developed. This technology features a claw characterized by a periodic opening/closing motion, at a controlled frequency, capable of producing oscillating flows at transitional Reynolds numbers. An innovative method was also proposed for determining the corrosion rate of carbon steel samples under oscillating acidic streams (aqueous solution of HCl). By employing very-thin carbon steel specimens (25 μm thickness), with one side coated with Zn and not exposed to the stream, it became possible to electrochemically sense the Zn surface once the steel sample was perforated, thus providing the average dissolution rate into the most relevant pit on the steel surface. Furthermore, a laser light positioned beneath the metallic sample, along with a camera programmed to periodically capture images of the steel surface, facilitated the accurate counting of the number of newly formed pits. The system consisting of the thin steel sample and the Zn coating can be seen as a type of corrosion sensor. Furthermore, the proposed laser illumination method allows corroborating the electrochemical detection of pits and also establishing their location. The techniques crafted in this study pave the way for developing alternative corrosion sensors that boast appealing attributes: affordability, compactness, and acceptable accuracy to detect in time and space localized damage., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Godínez et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In this study, sulfur dots (GA-SDs) synthesized by using Gum Arabic (GA) as a green stabilizer were used as corrosion inhibitors and their inhibition effect for Q235 steel in 3.5- wt% NaCl solution was investigated by weight loss, electrochemical tests, and surface and interface analysis. The results revealed that the inhibition efficiency reached the maximum value of 96.5% at 250 mg/L and the water-soluble GA-SDs were able to adhere to the iron surface through the diffusion and agglomeration effect. The unique antibacterial activities demonstrated a 99.35% inhibition efficiency at 250 mg/L. Moreover, the optical properties endowed the inhibitors with the fluorescence tracing function, which is an effective approach to detecting the residual quantity of water treatment agents. This work may facilitate the development of the next generation of multifunction water treatment agents in industrial circulating water systems., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The corrosion of carbon steel infrastructure in acidic environments poses significant economic and safety challenges. Traditional inhibitors such as chromates are being phased out due to toxicity concerns. Thus, there is a need to develop effective and sustainable green alternatives. In this work, we evaluated an epoxy-based inhibitor, bisphenol A tetrabromo dipropoxy dianiline tetraglycidyl ether (TGEDADPTBBA), for protecting carbon steel against corrosion in 1 M hydrochloric acid. An integrated experiment-computation approach was employed. Polarization curves and electrochemical impedance spectroscopy were used to assess the inhibition efficiency and mechanism of TGEDADPTBBA. Quantum chemical calculations and molecular dynamics simulations provided atomic-level insights into adsorption behavior. Scanning electron microscopy with energy-dispersive X-ray spectroscopy characterized the surface morphology. The results showed that TGEDADPTBBA acted as a highly effective mixed-type inhibitor, achieving over 95% inhibition efficiency at a 10 -3  M concentration. It suppressed corrosion currents while increasing the charge transfer resistance. Theoretical studies revealed that TGEDADPTBBA adsorbed onto steel surfaces via both electrostatic and van der Waals interactions. This stable adsorption facilitated the formation of a protective barrier layer, as observed experimentally. Notably, our work demonstrated the synergistic potential of combining experimental corrosion testing with computational modeling to develop structure-property relationships for innovative inhibitor design. This integrated approach offers insight into inhibition mechanisms and presents TGEDADPTBBA as an attractive green corrosion inhibitor alternative for industrial applications., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

An easy synthesis of two 1,3,4-oxadiazole derivatives, namely, 2-phenyl-5-(pyridin-3-yl)-1,3,4-oxadiazole (POX) and 2-(4-methoxyphenyl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (4-PMOX), and their corrosion-inhibition efficacy against mild steel corrosion in 1 N HCl, is evaluated using weight loss from 303 to 323 K, Electrochemical Impedance Spectroscopy (EIS), Potentiodynamic Polarization (PDP), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), UV-Vis spectroscopy, along with theoretical evaluation. Both POX and 4-PMOX exhibit excellent inhibition efficiency, with values reaching 97.83% and 98% at 500 ppm, respectively. The PDP analysis reveals that both derivatives act as mixed-type inhibitors. The Langmuir adsorption isotherm provides insights into the adsorption phenomena, demonstrating that 4-PMOX exhibits superior adsorption behavior on the mild steel surface compared to POX. This finding is further supported by SEM, DFT, RDF, and MSD analyses. Quantum mechanical parameters, including E HOMO , E LUMO , dipole moment (μ), energy gap (ΔE), etc., are in good agreement with the effectiveness of inhibition performance revealing ΔE values of 3.10 and 2.75 for POX and 4-PMOX, respectively. The results obtained from this study hold significant implications for researchers aiming to design more efficient organic inhibitors to combat metal corrosion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The protective effect of A. annua against microbiologically influenced corrosion (MIC) of A36 steel caused by P. aeruginosa (PA) in a simulated marine environment was investigated using electrochemical, spectroscopic, and surface techniques. PA was found to accelerate the local dissolution of A36 which led to the formation of a porous α-FeOOH and γ-FeOOH surface layer. 2D and 3D profiles of treated coupons, obtained by optical profilometer, revealed the formation of crevices in the presence of PA. On the contrary, adding A. annua to the biotic medium led to the formation of a thinner, more uniform surface without significant damage. Electrochemical data showed that the addition of A. annua prevented the MIC of A36 steel with an inhibition efficiency of 60%. The protective effect was attributed to the formation of a more compact Fe 3 O 4 surface layer, as well as the adsorption of phenolics, such as caffeic acid and its derivatives on the A36 steel surfaces, as detected by FTIR and SEM-EDS analysis. ICP-OES confirmed that Fe and Cr species more readily diffuse from A36 steel surfaces incubated in biotic media (Fe; 1516.35 ± 7.94 μg L -1 cm -2 , Cr; 11.77 ± 0.40 μg L -1 cm -2 ) compared to the inhibited media (Fe; 35.01 ± 0.28 μg L -1 cm -2 , Cr; 1.58 ± 0.01 μg L -1 cm -2 )., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Low-alloy, high-strength structural steel AISI 8630 is exposed to severe microbiologically influenced corrosion (MIC) in its application environment. To address this issue, we independently designed and developed an AISI 8630 steel containing 0.4 wt% Cu (Cu-AISI 8630) to exploit the Cu antimicrobial effect. The corrosion behavior of two steels in the presence of marine Pseudomonas aeruginosa biofilm was explored by analyzing weight loss, electrochemical tests, SEM images, corrosion pit dimensions, and corrosion products. The electrochemical test results showed an increase in R p and a significant positive shift in E corr for Cu-AISI 8630 steel compared to AISI 8630 steel during the immersion cycles. A comparison of the pit morphology of AISI 8630 steel and Cu-AISI 8630 steel after 14 days showed that the maximum MIC pit depth was significantly reduced in the latter compared to the former (3.65 μm vs 9.47 μm). The XPS results showed that protective Cu 2 O and CuO layers were formed on the surface of Cu-AISI 8630 steel. The experimental results show that Cu improves the MIC resistance of Pseudomonas aeruginosa biofilms significantly., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this study, the corrosion inhibition performance of the natural polysaccharide guar gum (GG) for N80 carbon steel in CO 2 -saturated saline solution at different temperatures and immersion times was investigated by weight loss and electrochemical measurements. The results have revealed that GG showed good inhibition performance at lower and higher temperatures. The inhibition efficiency observed via weight loss measurements reached 76.16 and 63.19% with 0.4 g L -1 of GG, at 25 and 50 °C, respectively. The inhibition efficiency of GG increased as the inhibitor concentration and immersion time increased but decreased with increasing temperature. EIS measurements have shown that, even after prolonged exposure, GG was still able to protect the metal surface. Potentiodynamic measurements showed the mixed-type nature of GG inhibitive action. The Temkin and Dubinin-Radushkevich adsorption isotherm models give accurate fitting of the estimated data, and the calculated parameters indicated that the adsorption of GG occurred mainly via an electrostatic or physical adsorption process. The associated activation energy ( E a ) supported the physical adsorption nature of GG. FTIR analysis was used to explain the adsorption interaction between the inhibitor and the N80 carbon steel surface. SEM-EDS and AFM confirmed the adsorption of GG and the formation of an adsorptive layer of GG on the metal surface.Q a ) supported the physical adsorption nature of GG. FTIR analysis was used to explain the adsorption interaction between the inhibitor and the N80 carbon steel surface. SEM-EDS and AFM confirmed the adsorption of GG and the formation of an adsorptive layer of GG on the metal surface.

α-aminophosphonate (α-AP) is used as a novel corrosion inhibitor for carbon steel. The aggressive media applied in this study are HCl and H 2 SO 4 acid solutions. The findings indicate that the morphology of the α-AP compound is cubic, with particles ranging in size from 17 to 23 μm. FT-IR, 1 HNMR, 31 PNMR, and 13 CNMR analysis confirmed the synthesis of the α-AP molecule. It has been discovered that the compound α-AP plays an important role in inhibiting the corrosion of carbon steel in both HCl and H 2 SO 4 acids. This was identifiably inferred from the fact that the addition of α-AP compound decreased the corrosion rate. It is important to report that the maximum inhibition efficiency (92.4% for HCl and 95.7% for H 2 SO 4 ) was obtained at 180 ppm. The primary factor affecting the rate at which steel specimens corrode in acidic electrolytes is the tendency of α-AP compounds to adsorb on the surface of steel through their heteroatoms (O, N, and P). This was verified by SEM/EDX results. The adsorption actually occurs through physical and chemical mechanisms via different active centers which are matched with the calculated quantum parameters. In addition, the adsorption of α-AP follows the Langmuir isotherm.

The corrosion inhibition properties of 2-(1,3,4-thiadiazole-2-yl)pyrrolidine (2-TP) on mild steel in a 1 M HCl solution were investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) measurements. In addition, DFT calculations were performed on 2-TP. The polarization curves revealed that 2-TP is a mixed-type inhibitor. The results indicate that 2-TP is an effective inhibitor for mild steel corrosion in a 1.0 M HCl solution, with an inhibition efficiency of 94.6% at 0.5 mM 2-TP. The study also examined the impact of temperature, revealing that the inhibition efficiency increases with an increasing concentration of 2-TP and decreases with a rise in temperature. The adsorption of the inhibitor on the mild steel surface followed the Langmuir adsorption isotherm, and the free energy value indicated that the adsorption of 2-TP is a spontaneous process that involves both physical and chemical adsorption mechanisms. The DFT calculations showed that the adsorption of 2-TP on the mild steel surface is mainly through the interaction of the lone pair of electrons on the nitrogen atom of the thiadiazole ring with the metal surface. The results obtained from the weight loss, potentiodynamic polarization, EIS and OCP measurements were in good agreement with each other and confirmed the effectiveness of 2-TP as a corrosion inhibitor for mild steel in 1.0 M HCl solution. Overall, the study demonstrates the potential use of 2-TP as a corrosion inhibitor in acid environments., (© 2023. The Author(s).)

Novel imine-tethering cationic surfactants, namely (E)-3-((2-chlorobenzylidene)amino)- N -(2-(decyloxy)-2-oxoethyl)- N,N -dimethylpropan-1-aminium chloride (ICS-10) and (E)-3-((2-chlorobenzylidene)amino)- N,N -dimethyl- N -(2-oxo-2-(tetradecyloxy)ethyl)propan-1-aminium chloride (ICS-14), were synthesized, and the chemical structures were elucidated by various spectroscopic approaches. The surface properties of the target-prepared imine-tethering cationic surfactants were investigated. The effects of both synthesized imine surfactants on carbon steel corrosion in a 1.0 M HCl solution were investigated by weight loss (WL), potentiodynamic polarization (PDP), and scanning electron microscopy (SEM) methods. The outcomes show that the inhibition effectiveness rises with raising the concentration and diminishes with raising the temperature. The inhibition efficiency of 91.53 and 94.58 % were attained in the presence of the optimum concentration of 0.5 mM of ICS-10 and ICS-14, respectively. The activation energy ( E a ) and heat of adsorption ( Q ads ) were calculated and explained. Additionally, the synthesized compounds were investigated using density functional theory (DFT). Monte Carlo (MC) simulation was utilized to understand the mechanism of adsorption of inhibitors on the Fe (110) surface.

The microbial corrosion of marine structural steels (09CrCuSb low alloy steel (LAS) and Q235 carbon steel (CS)) in Desulfovibrio vulgaris medium and Pseudomonas aeruginosa medium based on seawater was investigated. In the D. vulgaris medium, the weight loss and maximum pit depth of 09CrCuSb LAS were 0.59 and 0.56 times as much as those of Q235 CS, respectively. Meanwhile, in the P. aeruginosa medium, the values were 0.53 and 0.67 times, respectively. Compared to Q235 CS, 09CrCuSb LAS contains more alloy elements (Cr, Ni, Cu, Al and Sb), which led to obvious inhibition of sessile bacteria growth but had no effect on planktonic bacteria. The number of live sessile cells on the 09CrCuSb LAS surface was 23.4 % and 26.9 % of that on the Q235 CS surface in the D. vulgaris medium and P. aeruginosa medium, respectively. Fewer sessile cells on the steel surface led to a lower extracellular electron transfer (EET) rate so that less corrosion occurred. In addition, the combined effect of alloying elements on grain refinement and passive film formation also improved the anti-corrosion property of the steels., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)