Search

Composite materials are used in many industries. Their mechanical and physical properties as well as their low weight make them suitable for use in many constructions. Their wide application generates a problem with their disposal. Therefore, it is necessary to design new materials based on waste from polyester–glass laminates in order to introduce a closed circuit in the composite production process. The article presents research aimed at determining solid material composites with polyester–glass recyclate, in order to use these materials for modeling the structure. The aim of this study was to determine the effect of the addition of recyclate to the polyester–glass composite on the deformation and the value of the Poisson number of the material. During the study, samples from composites with the addition of polyester–glass recyclate were used. Samples made in accordance with the standard for plastics PN-EN ISO 527-4_2000P were subjected to static tensile test on a universal testing machine, with variable load parameters. During the test, the longitudinal and transverse elongations of the samples were measured using a strain gauge measuring system. On the basis of the measurements, the values of Poisson numbers were determined, which allowed for a preliminary assessment of the impact of the recyclate content in the composite on its deformability.

This paper presents the results of investigations of the mechanical properties of epoxy–glass composites with the addition of rubber recyclate. For the purposes of the study, seven variants of materials were designed and manufactured, which differed in terms of the percentage of recyclate content (3, 5 and 7%) and the way the recyclate was distributed in the composite (one, two and three layers with a constant share of 5%). Tests of comparative mechanical properties were carried out using a static tensile test. As a result of the conducted tests, the following values were obtained for all variants of materials: tensile strength (Rm), Young's modulus (E) and percentage relative strain ε. In addition, for a deeper analysis of the results obtained, statistical calculations of Kolgomorov–Sinai EK-S metric entropy were performed on the experimental data sets, which were then analyzed. The results of the analysis indicate that the application of metric entropy calculations EK-S can be helpful in identifying changes in the internal structure of the composite material that occur during its loading, and which do not manifest themselves in any other tangible way. The data obtained as a result of the research can be used to optimize production processes and to determine the further direction of development of epoxy–glass composites with the addition of rubber recyclate, while saving time and resources. [ABSTRACT FROM AUTHOR]

The article presents a method of modifying the strength properties of epoxy–glass composite by changing the percentage composition of the matrix by the addition of rubber recyclate. Taking into account environmental protection and economic conditions in the process of recycling and utilisation of waste, it is advisable to look for applications of non-degradable waste materials. Based on epoxy resin, a glass mat with a random direction of fibres and rubber recyclate, a test material with different percentage compositions was produced. Samples from the manufactured materials were subjected to a static tensile test on a ZwickRoell testing machine using the ARAMIS SRX measuring system. In addition, CT (computerized tomography) scans of the inside of the samples were made using a ZEISS METROTOM 6 Scout tomograph, and observations of the internal structures were made using a scanning electron microscope. The use of optical and microscopic techniques enabled the precise determination of strength parameters of the examined composites and the analysis of the behaviour of samples under load. The analysis of deformations over time in the examined samples showed a beneficial effect of the addition of rubber recyclate on the elastic properties of the examined composites. [ABSTRACT FROM AUTHOR]

Currently, there is a noticeable trend of modifying new materials by using additives from the recycling of harmful waste. This is to protect the environment by using waste to produce composites and at the same time to reduce the cost of their production. The article presents an analysis of the impact of the use of rubber recyclate obtained from the utilization of car tires as a sandwich layer of epoxy–glass composites and its impact on the strength parameters of the composite. The presented research is an extension of the previously conducted analyses on composite materials modified with the addition of rubber recyclate. The four variants of the materials produced contained the same percentage amount of rubber recyclate, but differed in the way it was distributed and the number of layers. Static tensile tests as well as impact strength and kinetics of damage to samples made with and without the addition of recyclate were carried out. Observation of the structures of the materials with the use of SEM was also performed. A significant influence of the method of distributing the recyclate in layers on the strength parameters of the materials was found. In the case of composites with three and two sandwich layers of recyclate, more favorable results were obtained compared to the blank sample. In addition, the values of the impact strength measurements were subjected to statistical analysis at the significance level of α = 95%. The distributions were tested for normality with the Shapiro–Wilk test, differences between pairs were tested with the Student's t-test for dependent groups, and ANOVA differences were tested for independent groups. Using the Student's t-test, it was confirmed that between the pairs of variables in the configurations reference sample and modified sample, there were significant statistical differences in the distribution of impact strength measurement results for all the analyzed materials. Statistical analysis showed a significant usefulness in the selection of the material with the best strength parameters and a significant role of statistical methods in the study of anisotropic materials. [ABSTRACT FROM AUTHOR]

The aim of the research was to analyze the strength parameters of epoxy-glass sandwich composites with the addition of rubber recyclate. Material samples were subjected to a static tensile test performed on a universal testing machine in accordance with the current standard for fiber-reinforced composite materials. The test results showed that the addition of rubber recyclate increases the plastic parameters of the composite, which allows considering the use of the tested material for structures loaded with the vibration and noise scale. The use of rubber recyclate to modify the strength parameters of the composite allows to reduce the amount of rubber waste and ensures the durability of the new material. [ABSTRACT FROM AUTHOR]