Search

In this work, we describe compatibility assessments of a recombinant, trivalent non-replicating rotavirus vaccine (t-NRRV) candidate with a mock trivalent Sabin inactivated polio vaccine (t-sIPV). Both t-sIPV and t-NRRV are incompatible with thimerosal (TH), a preservative commonly used in pediatric pentavalent combination vaccines (DTwP-Hib-HepB) distributed in low- and middle-income countries (LMICs), preventing the development of a heptavalent combination. The compatibility of t-NRRV with a mock DTwP-Hib-HepB formulation is described in a companion paper. This case study highlights the analytical and formulation challenges encountered when combining a mock t-sIPV vaccine (unadjuvanted) with Alhydrogel® (AH) adjuvanted t-NRRV. Selective and stability-indicating competition ELISAs were implemented to monitor antibody binding to each of the six antigens (±AH). Simple mixing caused the undesired desorption of t-NRRV from AH with the concomitant binding of t-sIPV to AH. Although the former effect was mitigated by dialyzing sIPV bulks, decreased sIPV storage stability was observed at accelerated temperatures in the bivalent combination with a rank-ordering of P[8] > P[6] > P[4] and sIPV3 > sIPV2 > sIPV1. The compatibility of AH-adsorbed t-sIPV with alternative preservatives was evaluated, and parabens (methyl, propyl) were identified for potential use in this multi-dose bivalent formulation. Along with a companion paper, the lessons learned are discussed to facilitate the future formulation development of pediatric combination vaccines with new antigens. [ABSTRACT FROM AUTHOR]

Introducing new recombinant protein antigens to existing pediatric combination vaccines is important in improving coverage and affordability, especially in low- and middle-income countries (LMICs). This case-study highlights the analytical and formulation challenges encountered with three recombinant non-replicating rotavirus vaccine (NRRV) antigens (t-NRRV formulated with Alhydrogel® adjuvant, AH) combined with a mock multidose formulation of a pediatric pentavalent vaccine used in LMICs. This complex formulation contained (1) vaccine antigens (i.e., whole-cell pertussis (wP), diphtheria (D), tetanus (T), Haemophilus influenza (Hib), and hepatitis B (HepB), (2) a mixture of aluminum-salt adjuvants (AH and Adju-Phos®, AP), and (3) a preservative (thimerosal, TH). Selective, stability-indicating competitive immunoassays were developed to monitor binding of specific mAbs to each antigen, except wP which required the setup of a mouse immunogenicity assay. Simple mixing led to the desorption of t-NRRV antigens from AH and increased degradation during storage. These deleterious effects were caused by specific antigens, AP, and TH. An AH-only pentavalent formulation mitigated t-NRRV antigen desorption; however, the Hib antigen displayed previously reported AH-induced instability. The same rank-ordering of t-NRRV antigen stability (P[8] > P[4] > P[6]) was observed in mock pentavalent formulations and with various preservatives. The lessons learned are discussed to enable future multidose, combination vaccine formulation development with new vaccine candidates. [ABSTRACT FROM AUTHOR]

During the multi-dose formulation development of recombinant vaccine candidates, protein antigens can be destabilized by antimicrobial preservatives (APs). The degradation mechanisms are often poorly understood since available analytical tools are limited due to low protein concentrations and the presence of adjuvants. In this work, we evaluate different analytical approaches to monitor the structural integrity of HPV16 VLPs adsorbed to Alhydrogel™ (AH) in the presence and absence of APs (i.e., destabilizing m-cresol, MC, or non-destabilizing chlorobutanol, CB) under accelerated conditions (pH 7.4, 50 °C). First, in vitro potency losses displayed only modest correlations with the results from two commonly used methods of protein analysis (SDS-PAGE, DSC). Next, results from two alternative analytical approaches provided a better understanding of physicochemical events occurring under these same conditions: (1) competitive ELISA immunoassays with a panel of mAbs against conformational and linear epitopes on HPV16 VLPs and (2) LC-MS peptide mapping to evaluate the accessibility/redox state of the 12 cysteine residues within each L1 protein comprising the HPV16 VLP (i.e., with 360 L1 proteins per VLP, there are 4320 Cys residues per VLP). These methods expand the limited analytical toolset currently available to characterize AH-adsorbed antigens and provide additional insights into the molecular mechanism(s) of AP-induced destabilization of vaccine antigens. [ABSTRACT FROM AUTHOR]

Aluminum-salt vaccine adjuvants (alum) are commercially available as micron-sized particles with varying chemical composition and crystallinity. There are reports of enhanced adjuvanticity when the alum's particle size is reduced to the nanometer range. Previously, we demonstrated that a recombinant receptor-binding domain (RBD)-based COVID-19 vaccine candidate (RBD-J; RBD-L452K-F490W) formulated with aluminum hydroxide (Alhydrogel®; AH) and CpG 1018™ (CpG) adjuvants induced potent neutralizing antibody responses in mice yet displayed instability during storage. In this work, we evaluated whether sonication of AH to the nanometer size range (nanoAH) could further enhance immunogenicity or improve storage stability of the above formulation. The addition of CpG to nanoAH (at mouse doses), however, caused re-agglomeration of nanoAH. AH-CpG interactions were evaluated by Langmuir binding isotherms and zeta potential measurements, and stabilized nanoAH + CpG formulations of RBD-J were then designed by (1) optimizing CpG:Aluminum dose ratios or (2) adding a small-molecule polyanion (phytic acid, PA). Compared with the micron-sized AH + CpG formulation, the two stabilized nanoAH + CpG formulations of RBD-J demonstrated no enhancement in SARS-CoV-2 pseudovirus neutralizing titers in mice, but the PA-containing nanoAH + CpG formulation showed improved RBD-J storage stability trends (at 4, 25, and 37 °C). The formulation protocols presented herein can be employed to evaluate the potential benefits of the nanoAH + CpG adjuvant combination with other vaccine antigens in different animal models. [ABSTRACT FROM AUTHOR]

Polyvalent antigen display is an effective strategy to enhance the immunogenicity of subunit vaccines by clustering them in an array-like manner on a scaffold system. This strategy results in a higher local density of antigens, increased high avidity interactions with B cells and other antigen presenting cells, and therefore a more effective presentation of vaccine antigens. In this study, we used lumazine synthase (LS), an icosahedral symmetry capsid derived from Bacillus anthracis, as a scaffold to present 60 copies of a linear B cell epitope (PB10) from the ricin toxin fused to the C terminus of LS via four different linkers. We then investigated the effects of linker length, linker rigidity and formaldehyde crosslinking on the protein assembly, conformational integrity, thermal stability, in vitro antibody binding, and immunogenicity in mice. Fusion of the PB10 peptide onto LS, with varying linker lengths, did not affect protein assembly, thermal stability or exposure of the epitope, but had a minor impact on protein conformation. Formaldehyde crosslinking considerably improved protein thermal stability with only minor impact on protein conformation. All LS_PB10 constructs, when administered to mice by injection without adjuvant, elicited measurable anti-ricin serum IgG titers, although the titers were not sufficient to confer protection against a 10× lethal dose ricin challenge. This work sheds light on the biophysical properties, immunogenicity and potential feasibility of LS from B. anthracis as a scaffold system for polyvalent antigen display. [ABSTRACT FROM AUTHOR]

Continuous glucose monitoring (CGM) devices offer diabetes patients a convenient approach to assist in controlling blood glucose levels. A prototype CGM has been developed that uses the emission profile of a polarity-sensitive fluorophore (acrylodan) conjugated to a glucose/galactose-binding protein (SM4-AC) to measure the concentration of glucose in vivo. During development, a decrease in the devices signal intensity was observed in vivo over time, which was postulated to be result of oxidative degradation of SM4-AC. A comprehensive physicochemical analysis of SM4-AC was pursued to identify potential mechanisms of signal intensity loss in this CGM during in vitro forced oxidation studies. An assessment of the structural integrity and conformational stability of SM4-AC indicated a relatively decreased polarity and lower tertiary structure stability compared to unconjugated protein (SM4). The stability and polarity of SM4-AC was also altered in the presence of H2O2. Furthermore, a time-dependent loss in the fluorescence signal of SM4-AC was observed when incubated with H2O2. An LC-MS peptide mapping analysis of these protein samples indicated that primarily two Met residues in SM4-AC were susceptible to oxidation. When these two residues were genetically altered to an amino acid not prone to oxidation, the glucose binding ability of the protein was retained and no loss of acrylodan fluorescence was observed in the presence of H2O2. Genetic alteration of these two residues is proposed as an effective approach to increase the long-term stability of SM4-AC within this prototype CGM in vivo. [ABSTRACT FROM AUTHOR]

The ability of a GroEL-based bio-layer interferometry (BLI) assay to detect structurally altered and/or aggregated species of pharmaceutically relevant proteins is demonstrated. Assay development included optimizing biotinylated-GroEL immobilization to streptavidin biosensors, combined with biophysical and activity measurements showing native and biotinylated GroEL are both stable and active. First, acidic fibroblast growth factor (FGF-1) was incubated under conditions known to promote (40°C) and inhibit (heparin addition) molten globule formation. Heat exposed (40°C) FGF-1 exhibited binding to GroEL-biosensors, which was significantly diminished in the presence of heparin. Second, a polyclonal human IgG solution containing 6-8% non-native dimer showed an increase in higher molecular weight aggregates upon heating by size exclusion chromatography (SEC). The poly IgG solution displayed binding to GroEL-biosensors initially with progressively increased binding upon heating. Enriched preparations of the IgG dimers or monomers showed significant binding to GroEL-biosensors. Finally, a thermally treated IgG1 monoclonal antibody (mAb) solution also demonstrated increased GroEL-biosensor binding, but with different kinetics. The bound complexes could be partially to fully dissociated after ATP addition (i.e., specific GroEL binding) depending on the protein, environmental stress, and the assay's experimental conditions. Transmission electron microscopy (TEM) images of GroEL-mAb complexes, released from the biosensor, also confirmed interaction of bound complexes at the GroEL binding site with heat-stressed mAb. Results indicate that the GroEL-biosensor-BLI method can detect conformationally altered and/or early aggregation states of proteins, and may potentially be useful as a rapid, stability-indicating biosensor assay for monitoring the structural integrity and physical stability of therapeutic protein candidates. [ABSTRACT FROM AUTHOR]

Abstract: To assess the impact of manufacturing changes on antibody structure and function during the course of product development, three comparability studies were performed for each of two different IgG1 monoclonal antibody product candidates. Comparability study #1 evaluated the effect of changing the cell line and bulk drug substance manufacturing process for cell culture and purification. Results indicated that these process changes led to differences in sialylation of N-glycans and/or C-terminal lysine levels. Comparability study #2 results confirmed that scale-up of the bulk process and transfer to the commercial site, combined with changing from a lyophilized to a liquid dosage form, did not impact the structural or functional integrity of the antibodies. Comparability study #3 examined possible differences arising when the liquid formulation filled into pre-filled syringes and vials. Results indicated nearly identical molecular structure, biological activity, and degradation profiles except for a small yet statistically significant increase in the levels of subvisible particles in pre-filled syringes. These results from comparability studies with two different monoclonal antibodies are discussed with respect to the timing of the manufacturing changes and overall comparability strategies to assure safety and efficacy during development. [Copyright &y& Elsevier]

The development of safe and effective second-generation COVID-19 vaccines to improve affordability and storage stability requirements remains a high priority to expand global coverage. In this report, we describe formulation development and comparability studies with a self-assembled SARS-CoV-2 spike ferritin nanoparticle vaccine antigen (called DCFHP), when produced in two different cell lines and formulated with an aluminum-salt adjuvant (Alhydrogel, AH). Varying levels of phosphate buffer altered the extent and strength of antigen-adjuvant interactions, and these formulations were evaluated for their (1) in vivo performance in mice and (2) in vitro stability profiles. Unadjuvanted DCFHP produced minimal immune responses while AH-adjuvanted formulations elicited greatly enhanced pseudovirus neutralization titers independent of ∼100%, ∼40% or ∼10% of the DCFHP antigen adsorbed to AH. These formulations differed, however, in their in vitro stability properties as determined by biophysical studies and a competitive ELISA for measuring ACE2 receptor binding of AH-bound antigen. Interestingly, after one month of 4°C storage, small increases in antigenicity with concomitant decreases in the ability to desorb the antigen from the AH were observed. Finally, we performed a comparability assessment of DCFHP antigen produced in Expi293 and CHO cells, which displayed expected differences in their N-linked oligosaccharide profiles. Despite consisting of different DCFHP glycoforms, these two preparations were highly similar in their key quality attributes including molecular size, structural integrity, conformational stability, binding to ACE2 receptor and mouse immunogenicity profiles. Taken together, these studies support future preclinical and clinical development of an AH-adjuvanted DCFHP vaccine candidate produced in CHO cells. [ABSTRACT FROM AUTHOR]

The safety and efficacy of protein pharmaceuticals depend not only on biological activity but also on purity levels. Impurities may be process related because of limitations in manufacturing or product related because of protein degradation occurring throughout the life history of a product. Although the pharmaceutical biotechnology industry has made great progress in improving bulk and drug product manufacturing as well as company-controlled storage and transportation conditions to minimize the level of degradation, there is less control over the many factors that may subsequently affect product quality after the protein pharmaceuticals are released and shipped by the manufacturer. Routine handling or unintentional mishandling of therapeutic protein products may cause protein degradation that remains unnoticed but can potentially compromise the clinical safety and efficacy of the product. In this commentary, we address some potential risks associated with (mis)handling of protein pharmaceuticals after release by the manufacturer. We summarize the environmental stress factors that have been shown to cause protein degradation and that may be encountered during typical handling procedures of protein pharmaceuticals in a hospital setting or during self-administration by patients. Moreover, we provide recommendations for improvements in product handling to help ensure the quality of protein pharmaceuticals during use. [ABSTRACT FROM AUTHOR]

Enterotoxigenic Escherichia coli (ETEC) is a common cause for diarrheal infections in children in low- and middle-income countries (LMICs). To date, no ETEC vaccine candidates have been approved. Passive immunization with low-cost, oral formulations of secretory IgA (sIgA) against ETEC is an alternative approach to protect high-risk populations in LMICs. Using a model sIgA monoclonal antibody (anti-LT sIgA2-mAb), the stability profiles of different formulations were assessed during storage and in in vitro digestion models (mimicking in vivo oral delivery). First, by employing various physicochemical techniques and a LT-antigen binding assay, three formulations with varying acid-neutralizing capacity (ANC) were evaluated to stabilize sIgA2-mAb during stress studies (freeze-thaw, agitation, elevated temperature) and during exposure to gastric phase digestion. Next, a low-volume, in vitro intestinal digestion model was developed to screen various additives to stabilize sIgA2-mAb in the intestinal phase. Finally, combinations of high ANC buffers and decoy proteins were assessed to collectively protect sIgA2-mAb during in vitro sequential (stomach to intestine) digestion. Based on the results, we demonstrate the feasibility of low-cost, 'single-vial', liquid formulations of sIgA-mAbs delivered orally after infant feeding for passive immunization, and we suggest future work based on a combination of in vitro and in vivo stability considerations. [ABSTRACT FROM AUTHOR]

The remarkable impact of mRNA vaccines on mitigating disease and improving public health has been amply demonstrated during the COVID-19 pandemic. Many new mRNA-based vaccine and therapeutic candidates are in development, yet the current reality of their stability limitations requires their frozen storage. Numerous challenges remain to improve formulated mRNA stability and enable refrigerator storage, and this review provides an update on developments to tackle this multi-faceted stability challenge. We describe the chemistry underlying mRNA degradation during storage and highlight how lipid nanoparticle (LNP) formulations are a double-edged sword: while LNPs protect mRNA against enzymatic degradation, interactions with and between LNP excipients introduce additional risks for mRNA degradation. We also discuss strategies to improve mRNA stability both as a drug substance (DS) and a drug product (DP) including the (1) design of the mRNA molecule (nucleotide selection, primary and secondary structures), (2) physical state of the mRNA-LNP complexes, (3) formulation composition and purity of the components, and (4) DS and DP manufacturing processes. Finally, we summarize analytical control strategies to monitor and assure the stability of mRNA-based candidates, and advocate for an integrated analytical and formulation development approach to further improve their storage, transport, and in-use stability profiles. [ABSTRACT FROM AUTHOR]

This work describes Part 2 of multi-dose formulation development of a Human Papillomavirus (HPV) Virus-Like Particle (VLP) based vaccine (see Part 1 in companion paper). Storage stability studies with candidate multi-dose formulations containing individual or combinations of seven different antimicrobial preservatives (APs) were performed with quadrivalent HPV VLP (6, 11, 16, 18) antigens adsorbed to aluminum-salt adjuvant (Alhydrogel®). Real-time (up to two years, 2-8°C) and accelerated (months at 25 and 40°C) stability studies identified eight lead candidates as measured by antigen stability (competitive ELISA employing conformational serotype-specific mAbs), antimicrobial effectiveness (modified European Pharmacopeia assay), total protein content (SDS-PAGE), and AP concentration (RP-UHPLC). The AH-adsorbed HPV18 VLP component was most sensitive to AP-induced destabilization. Optimal quadrivalent antigen storage stability while maintaining antimicrobial effectiveness was observed with 2-phenoxyethanol, benzyl alcohol, chlorobutanol, and 2-phenoxyethanol + benzyl alcohol combination. Interestingly, for single-AP containing multi-dose formulations, this rank-ordering of storage stability did not correlate with previously reported biophysical measurements of AP-induced antigen destabilization. Moreover, other APs (e.g., m-cresol, phenol, parabens) described by others for inclusion in multi-dose HPV VLP formulations showed suboptimal stability. These results suggest that each HPV VLP vaccine candidate (e.g., different serotypes, expression systems, processes, adjuvants) will require customized multi-dose formulation development. [ABSTRACT FROM AUTHOR]

Mechanical agitation of monoclonal antibody (mAb) solutions often leads to protein particle formation. In this study, various formulations of an immunoglobulin G (IgG) 1 mAb were subjected to different controlled interfacial stresses using a Langmuir trough, and protein particles formed at the interface and measured in bulk solution were characterized using atomic force microscopy and flow digital imaging. Results were compared to mAb solutions agitated in glass vials and unstressed controls. At lower pH, mAb solutions exhibited larger hysteresis in their surface pressure versus area isotherms and increased number of particles in bulk solution, when subjected to interfacial stresses. mAb samples subjected to 750-1000 interfacial compression-expansion cycles in 6 h contained high particle numbers in bulk solution, and displayed similar particulation trends when agitated in vials. At compression rates of 50 cycles in 6 h, however, particle levels in mAb solutions were comparable to unstressed controls, despite protein aggregates being present at the air-solution interface. These results suggest that while the air-solution interface serves as a nucleation site for initiating protein aggregation, the number of protein particles measured in bulk mAb solutions depends on the total number of compression cycles that proteins at the air-solution interface are subjected to within a fixed time. [ABSTRACT FROM AUTHOR]

Introducing multi-dose formulations of Human Papillomavirus (HPV) vaccines will reduce costs and enable improved global vaccine coverage, especially in low- and middle-income countries. This work describes the development of key analytical methods later utilized for HPV vaccine multi-dose formulation development. First, down-selection of physicochemical methods suitable for multi-dose formulation development of four HPV (6, 11, 16, and 18) Virus-Like Particles (VLPs) adsorbed to an aluminum adjuvant (Alhydrogel®, AH) was performed. The four monovalent AH-adsorbed HPV VLPs were then characterized using these down-selected methods. Second, stability-indicating competitive ELISA assays were developed using HPV serotype-specific neutralizing mAbs, to monitor relative antibody binding profiles of the four AH-adsorbed VLPs during storage. Third, concentration-dependent preservative-induced destabilization of HPV16 VLPs was demonstrated by addition of eight preservatives found in parenterally administered pharmaceuticals and vaccines, as measured by ELISA, dynamic light scattering, and differential scanning calorimetry. Finally, preservative stability and effectiveness in the presence of vaccine components were evaluated using a combination of RP-UHPLC, a microbial growth inhibition assay, and a modified version of the European Pharmacopoeia assay (Ph. Eur. 5.1.3). Results are discussed in terms of analytical challenges encountered to identify and develop high-throughput methods that facilitate multi-dose formulation development of aluminum-adjuvanted protein-based vaccine candidates. [ABSTRACT FROM AUTHOR]

Eight antimicrobial preservatives used in parenteral multidose formulations (thimerosal, 2-phenoxy ethanol, phenol, benzyl alcohol, m -cresol, chlorobutanol, methyl paraben, propyl paraben) were examined for their effects on the storage stability (4 °C, 25 °C) of an Alhydrogel® (AH) adjuvanted formulation of the non-replicating rotavirus vaccine (NRRV) recombinant P[4] protein antigen. The stability of AH-adsorbed P[4] was monitored for antigen-antibody binding, conformational stability, and antigen-adjuvant interaction via competitive ELISA, DSC, and SDS-PAGE, respectively. There was an unexpected correlation between increasing storage stability of the AH-adsorbed P[4] and preservative hydrophobicity (log P) (e.g., the parabens and chlorobutanol were least destabilizing). We used hydrogen exchange-mass spectrometry (HX-MS) to better understand the destabilizing effects of temperature and preservative on backbone flexibility of AH-adsorbed P[4]. Thimerosal addition immediately increased the backbone flexibility across much of the AH-adsorbed P[4] protein backbone (except the N-terminal P2 region and residues G17-Y 38), and further increase in P[4] backbone flexibility was observed after storage (4 °C, 4 weeks). HX-MS analysis of AH-adsorbed P[4] stored for 4 weeks at 25 °C revealed structural alterations in some regions of the epitope involved in P[4] specific mAb binding. These combined results are discussed in terms of a generalized workflow for multi-dose vaccine formulation development for recombinant protein antigens. [ABSTRACT FROM AUTHOR]

To accelerate the formulation development of live-virus vaccine (LVV) candidates, more rapid approaches to rank-order formulations and estimate their real-time storage stability losses are needed. In this case-study, we utilize new and previously described stability data of a live, rotavirus vaccine candidate (RV3-BB) in three different liquid formulations to model and compare predicted vs. experimental RV3-BB stability profiles. Linear-regression extrapolations of limited real-time (2-8 °C) stability data and Arrhenius modeling of accelerated (15, 25, 37 °C) stability data provided predictions of RV3-BB real-time stability profiles (2-8 °C, 24 months). Good correlations of modeled versus experimental stability data to rank-order the RV3-BB formulations were achieved by employing (1) a high-throughput RT-qPCR assay to measure viral titers, (2) additional assay replicates and stability time-points, and (3) a −80 °C control for each formulation to benchmark results at each stability time-point and temperature. Instead of accumulating two-year, 2–8 °C storage stability data, the same rank-ordering of the three RV3-BB formulations could have been achieved by modeling 37°, 25°, 15° (and 2–8 °C) stability data over 1, 3 and 12 months, respectively. The results of this case-study are discussed in the context of accelerating LVV formulation development by expeditiously identifying stable formulations, estimating their shelf-lives, and determining vaccine vial monitoring (VVM) designations. [ABSTRACT FROM AUTHOR]

A two-step developability assessment workflow is described to screen variants of recombinant protein antigens under various formulation conditions to rapidly identify stable, aluminum-adjuvanted, multi-dose vaccine candidates. For proof-of-concept, a series of sequence variants of the recombinant non-replicating rotavirus (NRRV) P[8] protein antigen (produced in Komagataella phaffii) were compared in terms of primary structure, post-translational modifications, antibody binding, conformational stability, relative solubility and preservative compatibility. Based on these results, promising P[8] variants were down-selected and the impact of key formulation conditions on storage stability was examined (e.g., presence or absence of the aluminum-adjuvant Alhydrogel and the preservative thimerosal) as measured by differential scanning calorimetry (DSC) and antibody binding assays. Good correlations between rapidly-generated developability screening data and storage stability profiles (12 weeks at various temperatures) were observed for aluminum-adsorbed P[8] antigens. These findings were extended and confirmed using variants of a second NRRV antigen, P[4]. These case-study results with P[8] and P[4] NRRV variants are discussed in terms of using this vaccine formulation developability workflow to better inform and optimize formulation design with a wide variety of recombinant protein antigens, with the long-term goal of rapidly and cost-efficiently identifying low-cost vaccine formulations for use in low and middle income countries. [ABSTRACT FROM AUTHOR]

In a companion paper, a two-step developability assessment is presented to rapidly evaluate low-cost formulations (multi-dose, aluminum-adjuvanted) for new subunit vaccine candidates. As a case study, a non-replicating rotavirus (NRRV) recombinant protein antigen P[4] was found to be destabilized by the vaccine preservative thimerosal, and this effect was mitigated by modification of the free cysteine (C173S). In this work, the mechanism(s) of thimerosal-P[4] protein interactions, along with subsequent effects on the P[4] protein's structural integrity, are determined. Reversible complexation of ethylmercury, a thimerosal degradation byproduct, with the single cysteine residue of P[4] protein is demonstrated by intact protein mass analysis and biophysical studies. A working mechanism involving a reversible S-Hg coordinate bond is presented based on the literature. This reaction increased the local backbone flexibility of P[4] within the helical region surrounding the cysteine residue and then caused more global destabilization, both as detected by HX-MS. These effects correlate with changes in antibody-P[4] binding parameters and alterations in P[4] conformational stability due to C173S modification. Epitope mapping by HX-MS demonstrated involvement of the same cysteine-containing helical region of P[4] in antibody-antigen binding. Future formulation challenges to develop low-cost, multi-dose formulations for new recombinant protein vaccine candidates are discussed. [ABSTRACT FROM AUTHOR]

In this work, two different in vitro gastric digestion models were used to evaluate the stability of a live attenuated rotavirus vaccine candidate (RV3-BB) under conditions designed to mimic oral delivery in infants. First, a forced-degradation model was established at low pH to assess the buffering capacity of formulation excipients and to screen for RV3-BB stabilizers. Second, a sequential-addition model was implemented to examine RV3-BB stability under conditions more representative of oral administration to infants. RV3-BB rapidly inactivated at < pH 5.0 (37 °C, 1 h) as measured by an infectivity RT-qPCR assay. Pre-neutralization with varying volumes of infant formula (Enfamil®) or antacid (Mylanta®) conferred partial to full protection of RV3-BB. Excipients with sufficient buffering capacity to minimize acidic pH inactivation of RV3-BB were identified (e.g., succinate, acetate, adipate), however, they concomitantly destabilized RV3-BB in accelerated storage stability studies. Both effects were concentration dependent, thus excipient optimization was required to design candidate RV3-BB formulations which minimize acid-induced viral inactivation during oral delivery while not destabilizing the vaccine during long-term 2–8 °C storage. Finally, a statistical Design -of-Experiments (DOE) study examining RV3-BB stability in the in vitro sequential-addition model identified key formulation parameters likely affecting RV3-BB stability during in vivo oral delivery. • Formulation development for oral delivery of a live, rotavirus vaccine candidate (RV3-BB) is described. • RV3-BB virus stability during in vivo oral delivery was mimicked with two different in vitro gastric digestion models. • Pre-neutralization with infant formula (Enfamil®) or antacid (Mylanta®) conferred partial to full protection of RV3-BB. • Formulation excipients (succinate, acetate, adipate) minimized acidic pH inactivation of RV3-BB without preneutralization. [ABSTRACT FROM AUTHOR]

A nonreplicating rotavirus vaccine (NRRV) containing 3 recombinant fusion proteins adsorbed to aluminum adjuvant (Alhydrogel [AH]) is currently in clinical trials. The compatibility and stability of monovalent NRRV antigen with key components of a multidose vaccine formulation were examined using physicochemical and immunochemical methods. The extent and strength of antigen-adjuvant binding were diminished by increasing phosphate concentration, and acceptable levels were identified along with alternate buffering agents. Addition of the preservative thimerosal destabilized AH-adsorbed P2-VP8-P[8] as measured by differential scanning calorimetry. Over 3 months at 4°C, AH-adsorbed P2-VP8-P[8] was stable, whereas at 25°C and 37°C, instability was observed which was greatly accelerated by thimerosal addition. Loss of antibody binding (enzyme-linked immunosorbent assay) correlated with loss of structural integrity (differential scanning calorimetry, fluorescence spectroscopy) with concomitant nonnative disulfide bond formation (sodium dodecyl sulfate-polyacrylamide gel electrophoresis) and Asn deamidation (liquid chromatography -mass spectrometry peptide mapping). An alternative preservative (2-phenoxyethanol) showed similar antigen destabilization. Due to limited availability, only key assays were performed with monovalent P2-VP8-P[4] and P2-VP8-P[6] AH-adsorbed antigens, and varying levels of preservative incompatibility were observed. In summary, monovalent AH-adsorbed NRRV antigens stored at 4°C showed good stability without preservatives; however, future formulation development efforts are required to prepare a stable, preservative-containing, multidose NRRV formulation. [ABSTRACT FROM AUTHOR]

Although live attenuated Rotavirus (RV) vaccines are available globally to provide protection against enteric RV disease, efficacy is substantially lower in low- to middle-income settings leading to interest in alternative vaccines. One promising candidate is a trivalent nonreplicating RV vaccine, comprising 3 truncated RV VP8 subunit proteins fused to the P2 CD4+ epitope from tetanus toxin (P2-VP8-P[4/6/8]). A wide variety of analytical techniques were used to compare the physicochemical properties of these 3 recombinant fusion proteins. Various environmental stresses were used to evaluate antigen stability and elucidate degradation pathways. P2-VP8-P[4] and P2-VP8-P[6] displayed similar physical stability profiles as function of pH and temperature while P2-VP8-P[8] was relatively more stable. Forced degradation studies revealed similar chemical stability profiles with Met1 most susceptible to oxidation, the single Cys residue (at position 173/172) forming intermolecular disulfide bonds (P2-VP8-P[6] was most susceptible), and Asn7 undergoing the highest levels of deamidation. These results are visualized in a structural model of the nonreplicating RV antigens. The establishment of key structural attributes of each antigen, along with corresponding stability-indicating methods, have been applied to vaccine formulation development efforts (see companion paper), and will be utilized in future analytical comparability assessments. [ABSTRACT FROM AUTHOR]

In a companion paper, the structural integrity, conformational stability, and degradation mechanisms of 3 recombinant fusion-protein antigens comprising a non-replicating rotavirus (NRRV) vaccine candidate (currently being evaluated in early-stage clinical trials) are described. In this work, we focus on the aggregation propensity of the 3 NRRV antigens coupled to formulation development studies to identify common frozen bulk candidate formulations. The P2-VP8-P[8] antigen was most susceptible to shaking and freeze-thaw–induced aggregation and particle formation. Each NRRV antigen formed aggregates with structurally altered protein (with exposed apolar regions and intermolecular β-sheet) and dimers containing a non-native disulfide bond. From excipient screening studies with P2-VP8-P[8], sugars or polyols (e.g., sucrose, trehalose, mannitol, sorbitol) and various detergents (e.g., Pluronic F-68, polysorbate 20 and 80, PEG-3350) were identified as stabilizers against aggregation. By combining promising additives, candidate bulk formulations were optimized to not only minimize agitation-induced aggregation, but also particle formation due to freeze-thaw stress of P2-VP8-P[8] antigen. Owing to limited material availability, stabilization of the P2-VP8-P[4] and P2-VP8-P[6] was confirmed with the lead candidate P2-VP8-P[8] formulations. The optimization of these bulk NRRV candidate formulations is discussed in the context of subsequent drug product formulations in the presence of aluminum adjuvants. [ABSTRACT FROM AUTHOR]

Enterotoxigenic Escherichia coli (ETEC) is a major cause of diarrheal disease among children in developing countries, and there are no licensed vaccines to protect against ETEC. Passive immunization by oral delivery of ETEC-specific secretory IgAs (sIgAs) could potentially provide an alternative approach for protection in targeted populations. In this study, a series of physiochemical techniques and an in vitro gastric digestion model were used to characterize and compare key structural attributes and stability profiles of 3 anti–heat-labile enterotoxin mAbs (sIgA1, sIgA2, and IgG1 produced in CHO cells). The mAbs were evaluated in terms of primary structure, N-linked glycan profiles, size and aggregate content, relative apparent solubility, conformational stability, and in vitro antigen binding. Compared to IgG1 mAb, sIgA1 and sIgA2 mAbs showed increased sample heterogeneity, especially in terms of N-glycan composition and the presence of higher molecular weight species. The sIgA mAbs showed overall better physical stability and were more resistant to loss of antigen binding activity during incubation at low pH, 37°C with pepsin. These results are discussed in terms of future challenges to design stable, low-cost formulations of sIgA mAbs as an oral supplement for passive immunization to protect against enteric diseases in the developing world. [ABSTRACT FROM AUTHOR]

Live attenuated viral vaccine/vector candidates are inherently unstable and infectivity titer losses can readily occur without defining appropriate formulations, storage conditions and clinical handling practices. During initial process development of a candidate vaccine against HIV-1 using a recombinant Human Cytomegalovirus vector (rHCMV-1), large vector titer losses were observed after storage at 4 °C and after undergoing freeze-thaw. Thus, the goal of this work was to develop candidate frozen liquid formulations of rHCMV-1 with improved freeze-thaw and short-term liquid stability for potential use in early clinical trials. To this end, a virus stability screening protocol was developed including use of a rapid, in vitro cell-based immunofluorescence focus assay to quantitate viral titers. A library of ∼50 pharmaceutical excipients (from various known classes of additives) were evaluated for their effect on vector stability after freeze-thaw cycling or incubation at 4 °C for several days. Certain additives including sugars and polymers (e.g., trehalose, sucrose, sorbitol, hydrolyzed gelatin, dextran 40) as well as removal of NaCl (lower ionic strength) protected rHCMV-1 against freeze-thaw mediated losses in viral titers. Optimized solution conditions (e.g., solution pH, buffers and sugar type) slowed the rate of rHCMV-1 titer losses in the liquid state at 4 °C. After evaluating various excipient combinations, three new candidate formulations were designed and rHCMV-1 stability was benchmarked against both the currently-used and a previously reported formulation. The new candidate formulations were significantly more stable in terms of reducing rHCMV-1 titer losses after 5 freeze-thaw cycles or incubation at 4 °C for 30 days. This case study highlights the utility of semi-empirical design of frozen liquid formulations of a live viral vaccine candidate, where protection against infectivity titer losses due to freeze-thaw and short-term liquid storage are sufficient to enable more rapid initiation of early clinical trials. [ABSTRACT FROM AUTHOR]

The induction of broadly neutralizing antibodies (bNAbs) is a major goal in the development of an effective vaccine against HIV-1. A soluble, trimeric, germline (gI) bNAb-targeting variant of the HIV-1 envelope glycoprotein (termed BG505 SOSIP.v4.1-GT1.1 gp140, abbreviated to GT1.1) has recently been developed. Here, we have compared this new immunogen with the parental trimer from which it was derived, BG505 SOSIP.664 gp140. We used a comprehensive suite of biochemical and biophysical methods to determine physicochemical similarities and differences between the 2 trimers, and thereby assessed whether additional formulation development efforts were needed for the GT1.1 vaccine candidate. The overall higher order structure and oligomeric states of the 2 vaccine antigens were quite similar, as were their thermal, chemical, and colloidal stability profiles, as evaluated during accelerated stability studies. Overall, we conclude that the primary sequence changes made to create the gl bNAb-targeting GT1.1 trimer did not detrimentally affect its physicochemical properties or stability profiles from a pharmaceutical perspective. This developability assessment of the BG505 GT1.1 vaccine antigen supports using the formulation and storage conditions previously identified for the parental SOSIP.664 trimer and enables the development of GT1.1 for phase I clinical studies. [ABSTRACT FROM AUTHOR]

Abstract A replication-deficient lentiviral vector encoding the tumor antigen gene NY-ESO-1 was characterized in terms of vector morphology, particle size range, concentration, and zeta potential using a variety of physical methods. Environmentally stressed vector samples were then evaluated in terms of viral vector particle size and concentration by nanoparticle tracking analysis (NTA). These NTA stability results correlated reasonably well with a quantitative polymerase chain reaction assay for quantitation of viral genome copy number (r2 = 0.80). Approximately 40 pharmaceutical excipients were examined for their ability to stabilize the vector against exposure to an adsorptive container surface (glass) as well as freeze-thaw cycling using NTA as the screening method. Stabilizing additives that inhibited viral vector particle loss under these conditions included proline, lactose, and mannitol. Several candidate frozen liquid formulations that contained a combination of these lead excipients and various buffering agents were further evaluated for their ability to stabilize the viral vector. The additional benefit of lowering the Tris buffer concentration was observed. This study highlights the use of physical particle assays such as NTA for initial screening of stabilizing excipients to minimize vector loss due to container adsorption and freeze-thaw cycling to facilitate early formulation development of viral vector candidates in frozen liquid formulations. [ABSTRACT FROM AUTHOR]

Abstract The zoonotic equine encephalitis viruses (EEVs) can cause debilitating and life-threatening disease, leading to ongoing vaccine development efforts for an effective virus-like particle (VLP) vaccine based on 3 strains of EEV (Eastern, Western, and Venezuelan or EEE, WEE and VEE VLPs, respectively). In this work, transmission electron microscopy and light scattering studies showed enveloped, spherical, and ∼70 nm sized VLPs. Biophysical studies demonstrated optimal VLP physical stability in the pH range of 7.5-8.5 and at temperatures below ∼50°C. Interestingly, the individual stability profiles differed notably between the 3 VLPs. Numerous pharmaceutical excipients were screened for their VLP stabilizing effects against thermal stress. Sucrose, sorbitol, sodium chloride, and pluronic F-68 were identified as promising stabilizers and the concentrations and combinations of these additives were optimized. Candidate monovalent VLP bulk formulations were incubated at temperatures ranging from −80°C to 40°C to establish freeze-thaw, long-term (2°C-8°C) and accelerated stability trends. Good VLP stability profiles were observed at each storage temperature, except for a distinct instability observed at −20°C. The interaction of monovalent and trivalent VLP formulations with aluminum adjuvants was examined, both in terms of antigen adsorption and desorption over time. The implications of these findings on future vaccine formulation development of EEV VLPs are discussed. [ABSTRACT FROM AUTHOR]

We have used hydrogen exchange–mass spectrometry to characterize local backbone flexibility of 4 well-defined IgG1-Fc glycoforms expressed and purified from Pichia pastoris , 2 of which were prepared using subsequent in vitro enzymatic treatments. Progressively decreasing the size of the N-linked N297 oligosaccharide from high mannose (Man8-Man12), to Man5, to GlcNAc, to nonglycosylated N297Q resulted in progressive increases in backbone flexibility. Comparison of these results with recently published physicochemical stability and Fcγ receptor binding data with the same set of glycoproteins provide improved insights into correlations between glycan structure and these pharmaceutical properties. Flexibility significantly increased upon glycan truncation in 2 potential aggregation-prone regions. In addition, a correlation was established between increased local backbone flexibility and increased deamidation at asparagine 315. Interestingly, the opposite trend was observed for oxidation of tryptophan 277 where faster oxidation correlated with decreased local backbone flexibility. Finally, a trend of increasing C'E glycopeptide loop flexibility with decreasing glycan size was observed that correlates with their FcγRIIIa receptor binding properties. These well-defined IgG1-Fc glycoforms serve as a useful model system to identify physicochemical stability and local backbone flexibility data sets potentially discriminating between various IgG glycoforms for potential applicability to future comparability or biosimilarity assessments. [ABSTRACT FROM AUTHOR]

The effects of 2 squalene-based emulsion adjuvant systems (MedImmune emulsion 0 [ME.0] and Stable Emulsion [SE]) on the structure and stability of the recombinant protein antigen alpha-toxin (AT), a potential vaccine candidate for Staphylococcus aureus infection, were investigated using Fourier-transform infrared spectroscopy and both steady-state and time-resolved intrinsic fluorescence spectroscopy as well as differential scanning calorimetry (DSC). A component study, performed to identify the effects of the individual emulsion's components, showed negligible interactions between AT and ME.0. DSC analysis showed the ME.0 emulsion thermally destabilized AT, probably because of changes in the buffer composition of AT upon mixing. The SE emulsion caused increased alpha-helix and decreased beta-sheet content in AT, and a significant blue shift in the fluorescence spectra relative to that of AT in solution. DSC analysis showed SE exerted a dramatic thermal stabilization effect on AT, probably attributable to an interaction between AT and SE. Size exclusion chromatography showed a complete loss in the recovery of AT when mixed with SE, but not ME.0, indicating a high degree of interaction with SE. This work successfully characterized the biophysical properties of AT in the presence of 2 emulsion adjuvants including a component study to rationalize how emulsion components affect protein antigen stability. [ABSTRACT FROM AUTHOR]

Cross-reacting material 197 (CRM 197 ), a single amino acid mutant of diphtheria toxoid, is a commonly used carrier protein in commercial polysaccharide protein conjugate vaccines. In this study, CRM 197 proteins from 3 different expression systems and 5 different manufacturers were obtained for an analytical comparability assessment using a wide variety of physicochemical and in vitro antigenic binding assays. A comprehensive analysis of the 5 CRM 197 molecules demonstrate that recombinant CRM 197 's expressed in heterologous systems ( Escherichia coli and Pseudomonas fluorescens ) are overall highly similar (if not better in some cases) to those expressed in the traditional system ( Corynebacterium diphtheriae ) in terms of primary sequence/post-translational modifications, higher order structural integrity, apparent solubility, physical stability profile (vs. pH and temperature), and in vitro antigenicity. These results are an encouraging step to demonstrate that recombinant CRM 197 expressed in alternative sources have the potential to replace CRM 197 expressed in C diphtheriae as a source of immunogenic carrier protein for lower cost polysaccharide conjugate vaccines. The physicochemical assays established in this work to monitor the key structural attributes of CRM 197 should also prove useful as complementary characterization methods (to routine quality control assays) to support future process and formulation development of lower cost CRM 197 carrier proteins for use in various conjugate vaccines. [ABSTRACT FROM AUTHOR]

The worldwide switch to inactivated polio vaccines (IPVs) is a key component of the overall strategy to achieve and maintain global polio eradication. To this end, new IPV vaccine delivery systems may enhance patient convenience and compliance. In this work, we examine Nanopatch™ (a solid, polymer microprojection array) which offers potential advantages over standard needle/syringe administration including intradermal delivery and reduced antigen doses. Using trivalent IPV (tIPV) and a purpose-built evaporative dry-down system, candidate tIPV formulations were developed to stabilize tIPV during the drying process and on storage. Identifying conditions to minimize tIPV potency losses during rehydration and potency testing was a critical first step. Various classes and types of pharmaceutical excipients (∼50 total) were then evaluated to mitigate potency losses (measured through D-antigen ELISAs for IPV1, IPV2, and IPV3) during drying and storage. Various concentrations and combinations of stabilizing additives were optimized in terms of tIPV potency retention, and 2 candidate tIPV formulations containing cyclodextrin and a reducing agent (e.g., glutathione), maintained ≥80% D-antigen potency during drying and subsequent storage for 4 weeks at 4°C, and ≥60% potency for 3 weeks at room temperature with the majority of losses occurring within the first day of storage. [ABSTRACT FROM AUTHOR]

Antibodies are molecules that exhibit diverse conformational changes on different timescales, and there is ongoing interest to better understand the relationship between antibody conformational dynamics and storage stability. Physical stability data for an IgG4 monoclonal antibody (mAb-D) were gathered through traditional forced degradation (temperature and stirring stresses) and accelerated stability studies, in the presence of different additives and solution conditions, as measured by differential scanning calorimetry, size exclusion chromatography, and microflow imaging. The results were correlated with hydrogen exchange mass spectrometry (HX-MS) data gathered for mAb-D in the same formulations. Certain parameters of the HX-MS data, including hydrogen exchange in specific peptide segments in the C H 2 domain, were found to correlate with stabilization and destabilization of additives on mAb-D during thermal stress. No such correlations between mAb physical stability and HX-MS readouts were observed under agitation stress. These results demonstrate that HX-MS can be set up as a streamlined methodology (using minimal material and focusing on key peptide segments at key time points) to screen excipients for their ability to physically stabilize mAbs. However, useful correlations between HX-MS and either accelerated or real-time stability studies will be dependent on a particular mAb's degradation pathway(s) and the type of stresses used. [ABSTRACT FROM AUTHOR]

An automated method using biotinylated GroEL-streptavidin biosensors with biolayer interferometry (GroEL-BLI) was evaluated to detect the formation of transiently formed, preaggregate species in various pharmaceutically relevant monoclonal antibody (mAb) samples. The relative aggregation propensity of various IgG1 and IgG4 mAbs was rank ordered using the GroEL-BLI biosensor method, and the least stable IgG4 mAb was subjected to different stresses including elevated temperatures, acidic pH, and addition of guanidine HCl. The GroEL-BLI biosensor detects mAb preaggregate formation mostly before, or sometimes concomitantly with, observing soluble aggregates and subvisible particles using size-exclusion chromatography and microflow imaging, respectively. A relatively unstable bispecific antibody (Bis-3) was shown to bind the GroEL biosensor even at low temperatures (25 ° C). During thermal stress (50°C, 1 h), increased Bis-3 binding to GroEL-biosensors was observed prior to aggregation by size-exclusion chromatography or microflow imaging. Transmission electron microscopy analysis of Bis-3 preaggregate GroEL complexes revealed, in some cases, potential hydrophobic interaction sites between the Fc domain of the Bis-3 and GroEL protein. The automated BLI method not only enables detection of transiently formed preaggregate species that initiate protein aggregation pathways but also permits rapid mAb formulation stability assessments at low volumes and low protein concentrations. [ABSTRACT FROM AUTHOR]

A novel protein adjuvant double-mutant Escherichia coli heat-labile toxin, LT (R192G/L211A) or dmLT, is in preclinical and early clinical development with various vaccine candidates. Structural characterization and formulation development of dmLT will play a key role in its successful process development, scale-up/transfer, and commercial manufacturing. This work describes extensive analytical characterization of structural integrity and physicochemical stability profile of dmLT from a lyophilized clinical formulation. Reconstituted dmLT contained a heterogeneous mixture of intact holotoxin (AB 5 , ∼75%) and free B 5 subunit (∼25%) as assessed by analytical ultracentrifugation and hydrophobic interaction chromatography. Intact mass spectrometry (MS) analysis revealed presence of Lys 84 glycation near the native sugar-binding site in dmLT, and forced degradation studies using liquid chromatography-MS peptide mapping demonstrated specific Asn deamidation and Met oxidation sites. Using multiple biophysical measurements, dmLT was found most stable between pH 6.5 and 7.5 and at temperatures ≤50°C. In addition, soluble aggregates and particle formation were observed upon shaking stress. By identifying the physicochemical degradation pathways of dmLT using newly developed stability-indicating analytical methods from this study, we aim at developing more stable candidate formulations of dmLT that will minimize the formation of degradants and improve storage stability, as both a frozen bulk substance and eventually as a liquid final dosage form. [ABSTRACT FROM AUTHOR]

Crofelemer is a botanical polymeric proanthocyanidin that inhibits chloride channel activity and is used clinically for treating HIV-associated secretory diarrhea. Crofelemer lots may exhibit significant physicochemical variation due to the natural source of the raw material. A variety of physical, chemical, and biological assays were used to identify potential critical quality attributes (CQAs) of crofelemer, which may be useful in characterizing differently sourced and processed drug products. Crofelemer drug substance was extracted from tablets of one commercial drug product lot, fractionated, and subjected to accelerated thermal degradation studies to produce derivative lots with variations in chemical and physical composition potentially representative of manufacturing and raw material variation. Liquid chromatography, UV absorbance spectroscopy, mass spectrometry, and nuclear magnetic resonance analysis revealed substantial changes in the composition of derivative lots. A chloride channel inhibition cell-based bioassay suggested that substantial changes in crofelemer composition did not necessarily result in major changes to bioactivity. In 2 companion papers, machine learning and data mining approaches were applied to the analytical and biological data sets presented herein, along with chemical stability data sets derived from forced degradation studies, to develop an integrated mathematical model that can identify CQAs which are most relevant in distinguishing between different populations of crofelemer. [ABSTRACT FROM AUTHOR]

High protein concentration formulations are required for low-volume administration of therapeutic antibodies targeted for subcutaneous, self-administration by patients. Ultra-high concentrations (≥150 mg/mL) can lead to dramatically increased solution viscosities, which in turn can lead to stability, manufacturing, and delivery challenges. In this study, various categories and individual types of pharmaceutical excipients and other additives (56 in total) were screened for their viscosity reducing effects on 2 different mAbs. The physicochemical stability profile, as well as viscosity ranges, of several candidate antibody formulations, identified and designed based on the results of the excipient screening, were evaluated over a 6-month time period under accelerated and real-time storage conditions. In addition to reducing the solution viscosities to acceptable levels for parenteral administration (using currently available and acceptable delivery devices), the candidate formulations did not result in notable losses of physicochemical stability of the 2 antibodies on storage for 6 months at 25°C. The experiments described here demonstrate the feasibility of a formulation development and selection approach to identify candidate high-concentration antibody formulations with viscosities within pharmaceutically acceptable ranges that do not adversely affect their physicochemical storage stability. [ABSTRACT FROM AUTHOR]

This work describes the formulation design and development of a novel protein based adjuvant, a double mutant of heat labile toxin (dmLT), based on knowledge of the protein’s structural integrity and physicochemical degradation pathways. Various classes of pharmaceutical excipients were screened for their stabilizing effect on dmLT during exposure to thermal and agitation stresses as monitored by high throughput analytical assays for dmLT degradation. Sucrose, phosphate, sodium chloride, methionine and polysorbate-80 were identified as potential stabilizers that protected dmLT against either conformational destabilization, aggregation/particle formation or chemical degradation (e.g., Met oxidation and Lys glycation). Different combinations and concentrations of the selected stabilizers were then evaluated to further optimize dmLT stability while maintaining pharmaceutically acceptable ranges of solution pH and osmolality. The effect of multiple freeze-thaw (FT) cycles on the physical stability of candidate bulk formulations was also examined. Increasing the polysorbate-80 concentration to 0.1% in the lead candidate bulk formulation mitigated the loss of protein mass during FT. This formulation development study enabled the design of a new bulk formulation of the dmLT adjuvant and provides flexibility for future use in combination with a variety of different vaccine dosage forms with different antigens. [ABSTRACT FROM AUTHOR]

Liquid chromatographic methods, combined with mass spectrometry, offer exciting and important opportunities to better characterize complex vaccine antigens including recombinant proteins, virus-like particles, inactivated viruses, polysaccharides, and protein-polysaccharide conjugates. The current abilities and limitations of these physicochemical methods to complement traditional in vitro and in vivo vaccine potency assays are explored in this review through the use of illustrative case studies. Various applications of these state-of-the art techniques are illustrated that include the analysis of influenza vaccines (inactivated whole virus and recombinant hemagglutinin), virus-like particle vaccines (human papillomavirus and hepatitis B), and polysaccharide linked to protein carrier vaccines (pneumococcal). Examples of utilizing these analytical methods to characterize vaccine antigens in the presence of adjuvants, which are often included to boost immune responses as part of the final vaccine dosage form, are also presented. Some of the challenges of using chromatographic and LC–MS as physicochemical assays to routinely test complex vaccine antigens are also discussed. [ABSTRACT FROM AUTHOR]

Adequate protein solubility is an important prerequisite for development, manufacture, and administration of biotherapeutic drug candidates, especially for high-concentration protein formulations. A previously established method for determining the relative apparent solubility (thermodynamic activity) of proteins using polyethylene glycol (PEG) precipitation is adapted for screening and comparing monoclonal antibody (mAb) candidates where only limited quantities (≤1 mg) are available. This micro-PEG assay is used to evaluate various broadly neutralizing mAb candidates to HIV-1 viral spike (gp120 and gp41 glycoproteins). Using ∼1 mg of VRC01-WT mAb per assay, the precision of the micro-PEG assay was established. A series of 7 different broadly neutralizing mAbs to the HIV-1 viral spike proteins were compared by curve shape (%PEG vs. protein concentration), %PEG midpoint determinations, and extrapolated apparent solubility values. Numerous formulation conditions were then evaluated for their relative effects on the VRC01-WT mAb. The PEG midpt and apparent solubility values of VRC01-WT mAb decreased as the solution pH increased and increased as NaCl and arginine were added. A final optimization of the micro-PEG assay established that amounts as low as 0.1-0.2 mg can be used. Thus, the micro-PEG assay has significant potential as a relative solubility screening tool during candidate selection and early formulation development. [ABSTRACT FROM AUTHOR]

Biosimilarity assessments are performed to decide whether 2 preparations of complex biomolecules can be considered "highly similar." In this work, a machine learning approach is demonstrated as a mathematical tool for such assessments using a variety of analytical data sets. As proof-of-principle, physical stability data sets from 8 samples, 4 well-defined immunoglobulin G1-Fragment crystallizable glycoforms in 2 different formulations, were examined (see More et al., companion article in this issue). The data sets included triplicate measurements from 3 analytical methods across different pH and temperature conditions (2066 data features). Established machine learning techniques were used to determine whether the data sets contain sufficient discriminative power in this application. The support vector machine classifier identified the 8 distinct samples with high accuracy. For these data sets, there exists a minimum threshold in terms of information quality and volume to grant enough discriminative power. Generally, data from multiple analytical techniques, multiple pH conditions, and at least 200 representative features were required to achieve the highest discriminative accuracy. In addition to classification accuracy tests, various methods such as sample space visualization, similarity analysis based on Euclidean distance, and feature ranking by mutual information scores are demonstrated to display their effectiveness as modeling tools for biosimilarity assessments. [ABSTRACT FROM AUTHOR]

As part of a series of articles in this special issue describing 4 well-defined IgG1-Fc glycoforms as a model system for biosimilarity analysis (high mannose-Fc, Man5-Fc, GlcNAc-Fc and N297Q-Fc aglycosylated), the focus of this work is comparisons of their physical properties. A trend of decreasing apparent solubility (thermodynamic activity) by polyethylene glycol precipitation (pH 4.5, 6.0) and lower conformational stability by differential scanning calorimetry (pH 4.5) was observed with reducing size of the N297-linked oligosaccharide structures. Using multiple high-throughput biophysical techniques, the physical stability of the Fc glycoproteins was then measured in 2 formulations (NaCl and sucrose) across a wide range of temperatures (10°C-90°C) and pH (4.0-7.5) conditions. The data sets were used to construct 3-index empirical phase diagrams and radar charts to visualize the regions of protein structural stability. Each glycoform showed improved stability in the sucrose (vs. salt) formulation. The HM-Fc and Man5-Fc displayed the highest relative stability, followed by GlcNAc-Fc, with N297Q-Fc being the least stable. Thus, the overall physical stability profiles of the 4 IgG1-Fc glycoforms also show a correlation with oligosaccharide structure. These data sets are used to develop a mathematical model for biosimilarity analysis (as described in a companion article by Kim et al. in this issue). [ABSTRACT FROM AUTHOR]

As part of a series of articles in this special issue evaluating model IgG1-Fc glycoforms for biosimilarity analysis, 3 well-defined IgG1-Fc glycoforms (high mannose-Fc, Man5-Fc, and N-acetylglucosamine-Fc) and a nonglycosylated Fc protein (N297Q-Fc) were examined in this work to elucidate chemical degradation pathways. The 4 proteins underwent a combination of accelerated thermal stability studies and 4 independent forced degradation studies (UV light, metal-catalyzed oxidation, peroxyl radicals, and hydrogen peroxide) at pH 6.0. Our results highlight chemical degradations at Asn315, Met428, Trp277, and Trp313. A cross-comparison of the different Fc glycoforms, stress conditions, and the observed chemical reactions revealed that both the deamidation of Asn315 and the transformation of Trp277 into glycine hydroperoxide were glycan dependent during incubation for 3 months at 40°C. Our data will show that different glycans not only affect chemical degradation differently but also do lead to different impurity profiles, which can affect chemical degradation. [ABSTRACT FROM AUTHOR]

Vaccine formulation development has traditionally focused on improving antigen storage stability and compatibility with conventional adjuvants. More recently, it has also provided an opportunity to modify the interaction and presentation of an antigen/adjuvant to the immune system to better stimulate the desired immune responses for maximal efficacy. In the last decade, there has been a paradigm shift in vaccine antigen and formulation design involving an improved physical understanding of antigens and a better understanding of the immune system. In addition, the discovery of novel adjuvants and delivery systems promises to further improve the design of new, more effective vaccines. Here we describe some of the fundamental aspects of formulation design applicable to virus-like-particle based vaccine antigens (VLPs). Case studies are presented for commercially approved VLP vaccines as well as some investigational VLP vaccine candidates. An emphasis is placed on the biophysical analysis of vaccines to facilitate formulation and stabilization of these particulate antigens. [ABSTRACT FROM AUTHOR]

Although formation of subvisible particles (1-100 μm) during manufacturing and/or storage is a major stability concern with protein therapeutics, particle numbers are often too low to permit for direct experimental measurement of their protein content (mass). The objective of this work was to develop a novel, accurate, and easy-to-implement method to calculate the mass of subvisible protein particles using particle number, size, and morphology data obtained from microflow imaging (MFI) measurements. The method was evaluated using (1) spherical and nonspherical polystyrene standards and (2) shake and stir-stressed IgG1 mAb solutions. For extensively stressed mAb samples, in which protein mass loss after particle removal could be measured experimentally, calculated results were in good agreement and showed improvements in accuracy and precision compared with other methods. Improved estimates of protein mass in particles were made possible by using morphological data to better model particle volume, and by using literature-based values for protein density and particle composition. This method improves estimations of protein particle mass when total amounts are too low to be measured experimentally and also facilitates a better understanding of protein particle formation by accounting for particle mass as well as number. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:536-547, 2015 [ABSTRACT FROM AUTHOR]