Search

Objective To demonstrate the feasibility of oblique lumbar interbody fusion (OLIF) combined with 4-screw fixation for treating two-level lumbar degenerative diseases.Methods An intact finite element model of L3-S1 (M0) was constructed and validated.Then,we constructed the M1 model by simulating OLIF surgery at L3/4 and L4/5 segments on the M0 model.By attachment of posterior 4-screw or 6-screw fixation to the M1 model,three 4-screw fixation models (M2-M4) and one 6-screw fixation model (M5) were established.The segmental and overall range of motion (ROM) and the peak von Mises stresses of superior endplate,cage,and posterior screw-rod were investigated under each implanted condition.Results Under the motion modes of forward flexion,backward extension,bilateral (left and right) flexion,and left and right rotation,the L3/4 ROM of M2 model and L4/5 ROM of M3 model increased,while the L3/4 and L4/5 ROM of M4 and M5 models significantly decreased compared with those of M1 model.Under all motion modes,the L4 superior endplate in M2 model and the L5 superior endplate in M3 model showed the maximum peak von Mises stress,and the peak von Mises stresses of L4 and L5 superior endplates in M4 and M5 models were close.The L3/4 cage in M2 model and the L4/5 cage in M3 model showcased the largest peak von Mises stress,and the peak von Mises stresses of cages in M4 and M5 models were close.The peak stresses of internal fixation in M2-M5 models were close.Conclusion Four-screw fixation can replace 6-screw fixation in the OLIF surgery for treating two-level degenerative lumbar diseases.

Purpose: To describe and illustrate a modified technique for using translaminar screw in the cervicothoracic junction (C7-T2)., Methods: 12 patients (8 males and 4 females, average age was 52 years) underwent insertion of unilateral or bilateral translaminar screws by using our modified technique. With this modified technique, a tiny unicortical "hole" was made at the middle of the contralateral lamina, and the screw can be directly visualized through the unicortical "hole" to prevent violating the spinal canal., Results: With this modified technique, the mean operation time was 205 min (range 145-360) and mean estimated blood loss was 445 ml (range 260-1250). The mean length of the laminar screws was 27 (range 24-30) mm. The results of the 12 patients with an average follow-up of 17 (6-33) months demonstrated this modified technique to be safe and effective in the fixation of cervicothoracic junction., Conclusion: In this modified technique, a tiny unicortical "hole" which was made at the middle of the dorsal lamina of cervicothoracic junction (C7-T2). By directly visualizing the screw inserting against the dorsal cortices of the lamina, this modified technique can reduce the risk of violation of the spinal canal and shorten the operation time.

Purpose: To establish reference data on the dimensions of C2 lamina to guide the use of translaminar screws with Wright's technique and a modified technique for pediatric patients in different age groups., Methods: 113 pediatric patients were divided into six age groups, and their cervical vertebrae were studied on CT scans. Laminar height, width, length and screw angle were measured. Statistical analysis was performed using Student t tests, Pearson's correlation and linear regression analysis., Results: Mean laminar height was 10.95 ± 2.81 mm, and mean width was 6.01 ± 0.90 mm. For Wright's technique, mean laminar length was 30.65 ± 3 mm, and the screw angle was 56.02° ± 3.62°. For the modified technique, mean laminar length was 22.07 ± 2.38 mm, and the screw angle was 67.40° ± 3.39°. 95.6% (108/113) of the children could insert a screw into the lamina (laminar width ≥ 4.5 mm), 72.6% (82/113) could accept bilateral translaminar screws (laminar width ≥ 4.5 mm and laminar height ≥ 9 mm)., Conclusion: Our investigation provides insight into the anatomy of C2 lamina in six pediatric age groups. Compared to adults, the benefits of C2 translaminar screws fixation are more obvious in the pediatric spine which has a large C2 lamina. Compared to Wright's technique, the modified technique should insert a screw with bigger insert angle and shorter screw length.