Search

Selection of condenser cooling technology can affect the financial as well as technical viability of concentrating solar power (CSP) plants. Detailed comparative assessment of three cooling technologies, i.e., wet, dry, and hybrid, is therefore desirable so as to facilitate selection of optimum cooling technology for the plant. Despite the high efficiency of wet cooling technology, considering the fact that the potential plant locations are generally in arid regions suffering from water scarcity, it is imperative to explore and consider other water conserving condenser cooling options. A review and comparison of technical, economic, and environmental aspects of the three condenser cooling technologies for CSP plants have been presented. Adoption of dry or hybrid technology as against wet cooling technology may lead to reduced thermal performance and increased parasitic power requirement resulting in the high cost of electricity generation. However, the same also results in reduced cooling water requirement up to 92% and thus increase the potential of solar thermal power generation considerably as sites in arid areas can also be utilized. [ABSTRACT FROM AUTHOR]

For large-scale dissemination of solar thermal power plants, in countries identified with huge potential, governments are offering various incentives. In an attempt towards studying the effectiveness of various incentives in reducing the levelised cost of electricity (LCOE) delivered by solar thermal power plants in India, this paper presents simple mathematical frameworks that facilitate the determination of the required level of an incentive so as to ensure that the LCOE is within a pre-specified limit. For example, for a 50 MW solar thermal power plant at Barmer (Rajasthan), LCOE of Rs. 9.75 per kWh can be achieved by providing 6.3% viability gap funding or an interest subsidy of 3% or provision of 32% investment tax credits to the equity investor or provision of production tax credits to the equity investor at the rate of Rs. 0.81 per kWh for first 10 years of operation of a plant. [ABSTRACT FROM AUTHOR]

Results of a preliminary techno-economic appraisal of solar thermal power generation at three locations in India are presented. The study uses System Advisor Model developed by NREL, USA. The results of the study provide useful insight into (a) selecting appropriate reference direct normal irradiance for design of solar thermal power plants, (b) identifying suitable combinations of solar multiple and hours of thermal energy storage and (c) cost reduction potential. The parabolic trough technology is used for exemplifying the procedure for this purpose. The estimated levelised unit cost of electricity is in the range of Rs (US$1=Indian rupees 51.66 on 5 October 2012) 16–21 per kWh for the most likely range of input parameters. The results also indicate possibility of about 30% reduction in unit cost of electricity by year 2021. [ABSTRACT FROM AUTHOR]

of a HOMER based techno-economic assessment of an electricity supply option based on a hybrid system comprising of a PV component, a diesel generator (DG) and electricity grid have been presented in this paper. The study includes analysis of electricity unavailability data for 132 locations in India spread over state capitals, district headquarters, municipal areas and villages. The values of Net Present Cost (NPC) and Cost of Electricity (CoE) have been estimated for 25 selected locations in the country and a comparison with corresponding values for conventional alternative (grid+DG) has also been presented. The study internalizes all relevant location specific parameters. The values of NPC and CoE are lower in the range of 9.5%–36.6% and 16%–33.6% respectively for the proposed system (grid+PV+DG) as compared to conventional system at all 25 locations considered. The inclusion of PV component results in reduced purchase of grid electricity and much lower hours of operation of DG. • Analyzed real-time hourly grid power supply outage status for outdoor telecom towers at 132 locations • Designed optimal hybrid systems for powering BTS in telecom towers at 25 selected locations in India, • Presented a detailed techno-economic comparison of solar PV based hybrid system for powering BTS • The values of NPC and CoE are lower in the range of 9.5%–36.6% and 16%–102.4% respectively for the hybrid system • The PV component results in reduced purchase of grid electricity, DG operation, electricity fed to grid, and CO 2 emissions [ABSTRACT FROM AUTHOR]

The sizing of a solar thermal power plant directly affects its cost and also the annual electricity output and hence its financial attractiveness. It involves deciding appropriate values of design DNI, solar multiple and hours of thermal storage to achieve high annual capacity utilization factor (CUF) with the least cost of electricity delivered. An analysis of the impact of these design parameters on the performance of parabolic trough concentrator (PTC) and linear Fresnel reflector (LFR) based solar thermal power plants is presented using System Advisor Model for eight locations in India. Annual electricity output is estimated using radiation data source of SEC-NREL. Levelized unit cost of electricity (LUCE) is estimated using benchmark capital cost and other financial conditions specified by the Central Electricity Regulatory Commission of Government of India. For a design DNI of 950 W/m 2 , LUCE is minimum in solar multiple range of 1.4–1.6 for PTC based plants and of 1.8–2.0 for LFR based plants. With a solar multiple of 1.0, LUCE is minimum in design DNI range of 550–700 W/m 2 for PTC based plants and 450–550 W/m 2 for LFR based plants. [ABSTRACT FROM AUTHOR]

Realistic assessment of utilization potential of solar energy for thermal power generation and identification of niche areas/locations for this purpose is critically important for designing and implementing appropriate policies and promotional measures. This paper presents the results of a detailed analysis undertaken for estimating the potential of solar thermal power generation in India. A comprehensive framework is developed that takes into account (i) the availability of wastelands (ii) Direct Normal Irradiance (DNI) (iii) wastelands that are habitat to endangered species and/or tribal population and/or that is prone to earthquakes and (iv) suitability of wasteland for wind power generation. Finally, using an approach developed for the allocation of wastelands suitable for solar power generation between thermal and photovoltaic routes, the potential of solar thermal power generation is assessed for two threshold values of DNI – 1800 kW h/m 2 and 2000 kW h/m 2 . With all the wastelands having wind speeds of 4 m/s or more allocated for wind power generation, the estimated potential for solar thermal power generation is 756 GW for a threshold DNI value of 1800 kW h/m 2 and 229 GW for a threshold DNI value of 2000 kW h/m 2 . Results obtained can be used for identification of best suited areas for solar thermal power generation in India. [ABSTRACT FROM AUTHOR]