Search

Natural convection in fluid-filled enclosures driven solely by a temperature difference represents an important phenomenon due to its numerous engineering applications. Applications span diverse fields such as passive solar heating, solar collectors and the energy efficient design of buildings. In this paper, we study convection inside a rooftop concentrating collector designed to operate at temperatures up to 200 °C. The absorber is contained in a sealed enclosure to minimise convective losses. The main heat losses are due to natural convection inside the enclosure and radiation heat transfer from the absorber tube. A numerical and experimental analysis of the combined laminar natural convection and surface radiation heat transfer inside the collector receiver cavity are presented. A computational fluid dynamics model for the prototype collector has been developed using ANSYS-CFX. Radiation and convection heat loss has been investigated as a function of absorber temperatures, ranging from 70 °C to 200 °C. Measurements of overall heat loss and particle imaging velocimetry (PIV) were used to experimentally determine the heat and mass transport within the enclosure. Excellent qualitative and quantitative agreement between the CFD and experiments were achieved. [ABSTRACT FROM AUTHOR]

Solar heating and cooling (SHC) systems are currently under rapid development and deployment due to their potential to reduce fossil fuel use and to alleviate greenhouse gas emissions in the building sector – a sector which is responsible for ∼40% of the world energy use. The available technologies on the market for thermally driven cooling systems are absorption and adsorption chillers, solid and liquid desiccant cooling systems, and ejector refrigeration cycles. Of these, absorption chillers are considered as the most desirable method for harnessing solar thermal energy due to their relative maturity, reliability, and higher efficiency. In addition, absorption chillers can take advantage of economies of scale in large buildings to obtain a relatively good levelized cost of cooling as compared to other thermally-driven air-conditioning systems. In this paper, the background theory on solar-powered absorption chillers is presented followed by a comprehensive literature review of the recent existing theoretical and experimental investigations on this technology is conducted. The review shows that the majority of solar absorption chillers installed and much of the research around the world is based on single-effect chillers and low-temperature solar thermal collectors, while less emphasis has been placed on the combination of high-temperature solar thermal collectors and multi-effect absorption chillers, especially triple-effect chillers. Research studies indicate the use of gas-fired backup systems for single-effect chillers is inefficient due to its very low primary energy savings. It was also found that the storage tank and piping can be major sources of heat losses in solar absorption cooling systems. Thus, special care should be taken to ensure sufficient and appropriate insulation for all heat loss components. In regions with low direct normal incidence solar resources (e.g. most of Europe), solar multi-effect chillers are relatively inefficient, so single-effect chiller-based solar cooling systems are the best techno-economic choice in such regions. Conversely, multi-effect absorption chillers with high-temperature collectors are indeed promising in regions with high solar resources. However, the review shows that using currently available technology, SHC absorption chillers are not able to economically compete with conventional cooling without government subsidies and incentives. Therefore, improving the economic performance of these systems is essential. While there is clearly more that can be done on chiller and solar collector components themselves, we believe some R&D emphasis going forward should also be dedicated to the balance of the system, including optimization of the system configuration, minimizing parasitic losses, improved design and integration of thermal storage and auxiliary system, and numerous controls and operational aspects. To date, many of these topics have been largely overlooked in favor of chiller performance studies. [ABSTRACT FROM AUTHOR]

This paper presents energetic, economic, and environmental (3E) analyses of four configurations of solar heating and cooling (SHC) systems based on coupling evacuated tube collectors with a single-effect LiBr–H 2 O absorption chiller. In the first configuration (SHC1), a gas-fired heater is used as the back-up system, while a mechanical compression chiller is employed as the auxiliary cooling system in the second configuration (SHC2). The capacity of the absorption chiller is designed based on the maximum building cooling load in these configurations. The third and fourth configurations (SHC3 and SHC4) are similar to SHC2, but the absorption chiller size is reduced to 50% and 20%, respectively. The results show that the highest primary energy saving is achieved by SHC2, leading to a solar fraction of 71.8% and saving 54.51% primary energy as compared to a reference conventional HVAC system. The economic performance of all configurations is still unsatisfactory (without subsidies) due to their high capital costs. However, if a government subsidy of 50% is considered, the results suggest that SHC4 can be economically feasible, achieving a payback period of 4.1 years, net present value of 568,700 AUD and solar fraction of 43%, contributing to 27.16% decrease in the plant primary energy consumption. [ABSTRACT FROM AUTHOR]