Search

An alcohol-soluble hyperbranched conjugated polymer HBPFN with a dimethylamino moiety is synthesized and used as a cathode interlayer. A PCE of 7.7% is obtained for PBDTTT-C-T/PC71 BM based solar cells. No obvious interfacial dipole is found at the interface between the active layer and HBPFN however, an interfacial dipole with the cathode could be one of the reasons for the enhanced performance., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A structure-device performance correlation in bulk heterojunction solar cells for new indandione-derived small molecule electron acceptors, FEHIDT and F8IDT, is presented. Devices based on the former exhibit higher power conversion efficiency (2.4%) and higher open circuit voltage, a finding consistent with reduced intermolecular interactions.

We report the first synthesis of a tetrafluorinated 4,7-bis(3,4-difluorothiophen-2-yl)-2,1,3-benzothiadiazole monomer and its polymerisation with dithieno[3,2-b:2',3'-d]germole by Stille coupling to afford a low band gap polymer with a high ionisation potential. Direct comparison to the non-fluorinated analogue demonstrates that fluorination results in an increase in ionisation potential with no change in optical band gap, and enhanced aggregation over the non-fluorinated polymer. These desirable properties result in a significant enhancement in OPV device performance in blends with PC(71)BM.

Solar cells made by high temperature and vacuum processes from inorganic semiconductors are at a perceived cost disadvantage when compared with solution-processed systems such as organic and dye-sensitized solar cells. We demonstrate that totally solution processable solar cells can be fabricated from inorganic nanocrystal inks in air at temperature as low as 300 °C. Focusing on a CdTe/ZnO thin-film system, we report solar cells that achieve power conversion efficiencies of 6.9% with greater than 90% internal quantum efficiency. In our approach, nanocrystals are deposited from solution in a layer-by-layer process. Chemical and thermal treatments between layers induce large scale grain formation, turning the 4 nm CdTe particles into pinhole-free films with an optimized average crystallite size of ∼70 nm. Through capacitance-voltage measurements we demonstrate that the CdTe layer is fully depleted which enables the charge carrier collection to be maximized.