Search

Pb‐free Sn‐based perovskite solar cells (PSCs) have significant potential for application in photovoltaic devices because of their suitable bandgap, low exciton binding energy, high carrier mobility, and long diffusion length. However, their performance is hampered by several issues. Sn‐based perovskites are highly susceptible to oxidation, which induces a high concentration of defects and degrades the chemical stability of the perovskite crystals. Herein, the anion formate (HCOO−) can effectively suppress the oxidation of Sn in the pure formamidinium tin triiodide (FASnI3) perovskite without using A‐site cationic additives. Moreover, the presence of formate results in a uniform pinhole‐free perovskite film with a low trap density, reduced charge carrier recombination, and improved charge extraction. Density functional theory calculations show that formate‐treated FASnI3 has improved stability against oxidative Sn degradation. The formate‐treated PSC achieves a power conversion efficiency of 12.11% at a high open‐circuit voltage of 0.71 V. The device exhibits improved stability in ambient air in which it maintained over 80% of its initial power conversion efficiency after 180 min because oxidation is inhibited owing to the strong interaction between Sn and formate. [ABSTRACT FROM AUTHOR]

The pace of advancement and increasing power conversion efficiencies (PCEs) have provided the possibility for organic solar cells (OSCs) to be commercialized in a variety of applications, including semitransparent photovoltaics. The application of dielectric–metal–dielectric (DMD) transparent electrodes to OSCs is an effective way to achieve semitransparent OSCs with different colors. Herein, a DMD multilayer structure based on two Sb2O3 layers and silver (Ag) thin films as the top electrode is introduced. An ultrathin Sb2O3 layer is deposited between the electron transport layer and the Ag film as a bottom layer for the Sb2O3/Ag/Sb2O3 electrode; this layer inhibits Ag atom diffusion and aggregation, which leads to uniform formation of ultrathin Ag films. The thickness of the middle metal layer influences fill factor and short‐circuit current density values, which correlate well with device resistance and light reflection. For the top Sb2O3 layer, the thickness allows the selective transmittance of specific wavelengths of visible light while reflecting wavelengths that are not transmitted, creating a dichroic effect. OSCs are successfully fabricated using three kinds of colorful active layers in conjunction with Sb2O3/Ag/Sb2O3 electrodes, resulting in vividly colored devices with PCE of 6.33–7.88% and average visible transmittances of 23–30%. [ABSTRACT FROM AUTHOR]

This study demonstrates high-performance, ternary-blend polymer solar cells by modifying a binary blend bulk heterojunction (PPDT2FBT:PC71BM) with the addition of a ternary component, PPDT2CNBT. PPDT2CNBT is designed to have complementary absorption and deeper frontier energy levels compared to PPDT2FBT, while being based on the same polymeric backbone. A power conversion efficiency of 9.46% is achieved via improvements in both short-circuit current density ( JSC) and open-circuit voltage ( VOC). Interestingly, the VOC increases with increasing the PPDT2CNBT content in ternary blends. In-depth studies using ultraviolet photoelectron spectroscopy and transient absorption spectroscopy indicate that the two polymers are not electronically homogeneous and function as discrete light harvesting species. The structural similarity between PPDT2CNBT and PPDT2FBT allows the merits of a ternary system to be fully utilized to enhance both JSC and VOC without detriment to fill-factor via minimized disruption of semi-crystalline morphology of binary PPDT2FBT:PC71BM blend. Further, by careful analysis, charge carrier transport in this ternary blend is clearly verified to follow parallel-like behavior. [ABSTRACT FROM AUTHOR]

ABSTRACT P(BDT-TCNT) and P(DTBDAT-TCNT), which has an extended conjugation length, were designed and synthesized for applications in organic solar cell (OSCs). The solution absorption maxima of P(DTBDAT-TCNT) with the extended conjugation were red-shifted by 5-15 nm compared with those of P(BDT-TCNT). The optical band gaps and highest occupied molecular orbital (HOMO) energy levels of both P(BDT-TCNT) and P(DTBDAT-TCNT) were similar. The structure properties of thin films of these materials were characterized using grazing-incidence wide-angle X-ray scattering and tapping-mode atomic force microscopy, and charge carrier mobilities were characterized using the space-charge limited current method. OSCs were formed using [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as the electron acceptor and 3% diphenylether as additive suppress aggregation. OSCs with P(BDT-TCNT) as the electron donor exhibited a power conversion efficiency (PCE) of 4.10% with a short-circuit current density of JSC = 9.06 mA/cm2, an open-circuit voltage of VOC = 0.77 V, and a fill factor of FF = 0.58. OSCs formed using P(DTBDAT-TCNT) as the electron donor layer exhibited a PCE of 5.83% with JSC = 12.2 mA/cm2, VOC = 0.77 V, and FF = 0.62. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 3182-3192 [ABSTRACT FROM AUTHOR]

In article number 1600637, Alan J. Heeger, Han Young Woo, Jin Young Kim, and co‐workers demonstrate high performance ternary blend polymer solar cells including two donor polymers which share the same polymeric backbone. Real charge carrier behavior of ternary blends is firstly clarified via transient absorption spectroscopy as parallel bulk‐heterojunction. [ABSTRACT FROM AUTHOR]