Search

Non‐fullerene acceptors (NFAs) have enabled power conversion efficiencies exceeding 19% in organic solar cells (OSCs). However, the open‐circuit voltage of OSCs remains low relative to their optical gap due to excessive non‐radiative recombination, and this now limits performance. Here, an important aspect of OSC design is considered, namely management of the triplet exciton population formed after non‐geminate charge recombination. By comparing the blends PM6:Y11 and PM6:Y6, it is shown that the greater crystallinity of the NFA domains in PM6:Y11 leads to a higher rate of triplet‐triplet annihilation (TTA). This is attributed to the four times larger ground state dipole moment of Y11 versus Y6, which improves the long range NFA out‐of‐plane ordering. Since TTA converts a fraction of the non‐emissive triplet states into bright singlet states, it has the potential to reduce non‐radiative voltage losses. Through a kinetic analysis of the recombination processes under 1‐Sun illumination, a framework is provided for determining the conditions under which TTA may improve OSC performance. If these could be satisfied, TTA has the potential to reduce non‐radiative voltage losses by up to several tens of millivolts. [ABSTRACT FROM AUTHOR]

The great progress in organic photovoltaics (OPV) over the past few years has been largely achieved by the development of non-fullerene acceptors (NFAs), with power conversion efficiencies now approaching 20%. To further improve device performance, loss mechanisms must be identified and minimized. Triplet states are known to adversely affect device performance, since they can form energetically trapped excitons on low-lying states that are responsible for non-radiative losses or even device degradation. Halogenation of OPV materials has long been employed to tailor energy levels and to enhance open circuit voltage. Yet, the influence on recombination to triplet excitons has been largely unexplored. Using the complementary spin-sensitive methods of photoluminescence detected magnetic resonance and transient electron paramagnetic resonance corroborated by transient absorption and quantum-chemical calculations, exciton pathways in OPV blends are unravelled employing the polymer donors PBDB-T, PM6, and PM7 together with NFAs Y6 and Y7. All blends reveal triplet excitons on the NFA populated via non-geminate hole back transfer and, in blends with halogenated donors, also by spin-orbit coupling driven intersystem crossing. Identifying these triplet formation pathways in all tested solar cell absorber films highlights the untapped potential for improved charge generation to further increase plateauing OPV efficiencies. [ABSTRACT FROM AUTHOR]

Organic solar cells (OSCs) have recently shown a rapid improvement in their performance, bringing power conversion efficiencies to above 18%. However, the open‐circuit voltage of OSCs remains low relative to their optical gap and this currently limits efficiency. Recombination to spin‐triplet excitons is a key contributing factor, and is widely, but not universally, observed in donor–acceptor blends using both fullerene and nonfullerenes as electron acceptors. Here, an experimental framework that combines time‐resolved optical and magnetic resonance spectroscopies to detect triplet excitons and identify their formation mechanisms, is reported. The methodology is applied to two well‐studied polymer:fullerene systems, PM6:PC60BM and PTB7‐Th:PC60BM. In contrast to the more efficient nonfullerene acceptor systems that show only triplet states formed via nongeminate recombination, the fullerene systems also show significant triplet formation via geminate processes. This requires that geminate electron–hole pairs be trapped long enough to allow intersystem crossing. It is proposed that this is a general feature of fullerene acceptor systems, where isolated fullerenes are known to intercalate within the alkyl sidechains of the donor polymers. Thus, the study demonstrates that engineering good donor and acceptor domain purity is key for suppressing losses via triplet excitons in OSCs. [ABSTRACT FROM AUTHOR]

The power conversion efficiencies (PCEs) of single‐junction organic solar cells (OSC) have now reached over 18%. This rapid recent progress can be attributed to the development of new nonfullerene electron acceptors (NFAs) that are paired with suitable high performing polymer electron donors. Substantial improvements in the PCEs and long‐term stability enabled by NFA OSCs have allowed the development and integration of these systems into many niche and novel applications. Here, the recent progress that has been made in understanding the device photophysics of high performing polymer:NFA blends is highlighted. As the bulk heterojunction morphology is intrinsically linked to the device photophysics, this review focuses on studies that have provided noteworthy morphological insights using advanced techniques such as solid‐state NMR and resonant soft X‐ray scattering. Through this, some of the major challenges that must be overcome to attain PCEs of over 20% in NFA OSCs are addressed. [ABSTRACT FROM AUTHOR]

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor ππ interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs. [ABSTRACT FROM AUTHOR]