Search

Hole transporting materials (HTMs) with high charge carrier mobilities and receptive functionalities have gained significant attention recently due to their direct effect on boosting the efficiency and lifetime of perovskite solar cells (PVSCs). Herein, two new simple small molecular diketopyrrolopyrrole-based HTMs with different central π-bridges (thieno[3,2-b]thiophene (DPP-TT), and dithieno[3,2-b : 2′,3′-d] thiophene (DPP-DTT)) were synthesized via a facile molecular engineering approach. Both small molecules exhibited strong absorption between 500 and 750 nm and an optical bandgap of ∼1.48 and 1.52 eV; however, their crystalline natures were significantly different, resulting in marked differences in their coating ability and PVSC performances. Thus, optimized DPP-TT-based PVSC devices with a lithium (bis(trifluoromethanesulfonyl)imide) dopant demonstrated a maximum PCE of 15.57% with superior energy level matching and an optimal trade-off between aggregation and processability, resulting in effective perovskite layer passivation via high surface coverage and suppression of charge recombination. In comparison, DPP-DTT had a slightly lower PCE of 14.49%, attributed to its poor film quality caused by its high aggregation tendency. Additionally, these HTMs delivered superior stability owing to superior hydrophobic characteristics. These findings provide valuable insight into the design of new HTMs with varying central π-bridge, which is a simple and effective approach. [ABSTRACT FROM AUTHOR]

The effect of the cross‐coupling catalyst tetrakis(triphenylphosphine)palladium(0) (Pd(PPh3)4) on the performance of a model organic bulk‐heterojunction solar cell composed of a blend of poly([2,6′‐4,8‐di(5‐ethylhexylthienyl)benzo[1,2‐b;3,3‐b]dithiophene]{3‐fluoro‐2[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl}) (PTB7‐Th) donor and 3,9‐bis(2‐methylene‐((3‐(1,1‐dicyanomethylene)‐6,7‐difluoro)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene (IOTIC‐4F) non‐fullerene acceptor is investigated. The effect of intentional addition of different amounts of Pd(PPh3)4 on morphology, free charge carrier generation, non‐geminate bulk trap‐ and surface trap‐assisted recombination as well as bimolecular recombination and charge extraction is quantified. This work shows that free charge carrier generation is affected significantly, while the impact of Pd(PPh3)4 on non‐geminate recombination processes is limited because the catalyst does not facilitate efficient trap‐assisted recombination. The studied system shows substantial robustness towards the addition of Pd(PPh3)4 in small amounts. [ABSTRACT FROM AUTHOR]

Three symmetrically difluorinated organic semiconductors (namely D5T2F‐P, D5T2F‐S, and D5T2F‐T) containing rhodanine‐flanked pentathiophene structures are synthesized and used as donors in all‐small‐molecule organic solar cells (ASM‐OSCs) prepared with the small‐molecule acceptor 2,2′‐((2Z,2′Z)‐((4,4,9,9‐tetrahexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(methanylylidene))bis(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile (IDIC‐4F). The different substitutional positions of fluorine atoms (–F) in the conjugated backbone of the donor molecule lead to various material and photovoltaic properties being exhibited. Among the three isomers, the centrally fluorinated D5T2F‐P exhibits a redshifted absorption spectrum, downshifted highest occupied molecular orbital (HOMO) energy level, and improved miscibility with IDIC‐4F in the blend films, all of which result in superior device performance. The power conversion efficiency (PCE) of the ASM‐OSCs based on D5T2F‐P:IDIC‐4F reaches an impressive value of 9.36% with an open‐circuit voltage (VOC) value of 0.86 V and a short‐circuit current density (JSC) value of 16.94 mA cm−2, whereas those of D5T2F‐S (6.11%) and D5T2F‐T (5.42%) are much lower. In comparison, an ASM‐OSC based on the nonfluorinated analogue DRCN5T fabricated under the same conditions exhibits poorer performance (8.03% with IDIC‐4F), revealing 16% enhancement in the PCE achieved through backbone fluorination. The PCE of 9.36% may be one of the highest efficiencies of oligothiophene‐based ASM‐OSCs reported in the literature to date. [ABSTRACT FROM AUTHOR]

Abstract: Two narrow bandgap non‐fullerene acceptors (NBG‐NFAs), namely, COTIC‐4F and SiOTIC‐4F, are designed and synthesized for the fabrication of efficient near‐infrared organic solar cells (OSCs). The chemical structures of the NBG‐NFAs contain a D′‐D‐D′ electron‐rich internal core based on a cyclopentadithiophene (or dithienosilole) (D) and alkoxythienyl (D′) core, end‐capped with the highly electron‐deficient unit 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile (A), ultimately providing a A‐D′‐D‐D′‐A molecular configuration that enhances the intramolecular charge transfer characteristics of the excited states. One can thereby reduce the optical bandgap (Egopt) to as low as ≈1.10 eV, one of the smallest values for NFAs reported to date. In bulk‐heterojunction (BHJ) OSCs, NBG‐NFA blends with the polymer donor PTB7‐Th yield power conversion efficiencies (PCE) of up to 9.0%, which is particularly high when compared against a range of NBG BHJ blends. Most significantly, it is found that, despite the small energy loss (Egopt − eVOC) of 0.52 eV, the PTB7‐Th/NBG‐NFA bulk heterojunction blends can yield short‐circuit current densities of up to 22.8 mA cm−2, suggesting that the design and application of NBG‐NFA materials have substantial potential to further improve the PCE of OSCs. [ABSTRACT FROM AUTHOR]