Search

Antireflection coatings (ARCs) with an indium thin oxide (ITO) layer on silicon heterojunction solar cells (SHJ) have garnered significant attention, which is due to their potential for increasing current density (Jsc) and enhancing reliability. We propose an additional tungsten trioxide (WO3) layer on the ITO/Si structure in this paper in order to raise the Jsc and demonstrate the influence on the SHJ solar cell. First, we simulate the Jsc characteristics for the proposed WO3/ITO/Si structure in order to analyze Jsc depending on the thickness of WO3 using an OPAL 2 simulator. As a result, the OPAL 2 simulation shows an increase in Jsc of 0.65 mA/cm2 after the 19 nm WO3 deposition on ITO with a doping concentration of 6.1 × 1020/cm2. We then fabricate the proposed samples and observe an improved efficiency of 0.5% with an increased Jsc of 0.75 mA/cm2 when using a 20 nm thick WO3 layer on the SHJ solar cell. The results indicate that the WO3 layer can be a candidate to improve the efficiency of SHJ solar cells with a low fabrication cost. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the effects of aluminum oxide (Al2O3) antireflection coating (ARC) on silicon heterojunction (SHJ) solar cells. Comprehensive ARCs simulation with Al2O3/ITO/c-Si structure is carried out and the feasibility to improve the short circuit current density (JSC) is demonstrated. Based on the simulation results, we apply Al2O3 ARC on SHJ solar cells, and the increasement in JSC to 1.5 mA/cm2 is observed with an Al2O3 layer thickness of 20 nm. It is because the total reflectance of SHJ solar cells is decreased by the shifting of the wavelength range on constructive and destructive light interference. As a result, we believe that the proposed Al2O3 ARC can support an effective engineering technic to increase JSC and efficiency of SHJ solar cells. [ABSTRACT FROM AUTHOR]