Search

This article describes the synthesis of a hydrophobic protective coating for concrete based on a silane derivative of fatty acids. The coating was obtained through a thiol-ene click addition reaction using methyl oleate and 3-mercaptopropyltrimethoxysilane in the presence of the photoinitiator 2,2-dimethoxy-2-phenylacetophenone (DMPA). This reaction proved to be more efficient compared with other tested (photo)initiators, considering the double bond conversion of oleate. The coating was applied to concrete using two methods: immersion and brushing. Both methods exhibited similar consumption of methyl oleate-based silane (UVMeS) at approximately 20 g/m2. The hydrophobic properties of the coatings were evaluated based on the contact angle, which for the modified surfaces was above 93°, indicating their hydrophobic nature. The penetration depth of the silane solution into the concrete was also studied; it was 5–7 mm for the immersion method and 3–5 mm for the brushing method. The addition of tetraethoxysilane (TEOS) to the silane solution slightly improved the barrier properties of the coating. [ABSTRACT FROM AUTHOR]

The effectiveness of protective coatings based on 3-(2,2,3,3,4,4,5,5-octafluoropentyloxy)propyltriethoxysilane (OFTES) in protecting concrete surfaces against water was tested. For the synthesis of OFTES, 2,2,3,3,4,4,5,5-octafluoropentanol, which is a by-product in the synthesis of poly(tetrafluoroethylene), was used. The proposed silane is a cheaper alternative to the fluorinated organosilicon compounds currently used. The coatings were deposited by the sol-gel method. As a result of the creation of chemical bonds between the concrete surface and the silane, a coating was created that permanently increases the hydrophobicity of the concrete. Fluorine chains attached to silicon atoms are an effective barrier that prevents access to water and limits its impact on the concrete surface. As a result of the proposed silanization, the concrete surface obtained a hydrophobic character at contact angles of up to 126°, and the water absorption of the concrete decreased by up to 96%. [ABSTRACT FROM AUTHOR]

The earlier obtained organosilicon derivatives of rapeseed oil were used for the production of coatings protecting steel surface against corrosion. Vegetable oils have been hitherto used for temporary protection of metals against corrosion, while thanks to the synthesis of appropriate organosilicon derivatives, it is now possible to create durable protective coatings. Due to the presence of alkoxysilyl groups and the use of the sol-gel process, the coatings obtained were bonded to the steel surface. The effectiveness of the coatings was checked by electrochemical methods and steel surface analysis. [ABSTRACT FROM AUTHOR]