Search

To achieve the carbonization utilization of Triarrhena lutarioriparia straw and relieve the environmental pressure caused by improper disposal in the Dongting Lake area, the agricultural efficiency of biochar derived from Triarrhena lutarioriparia was clarified. Two typical paddy soils in southern China, namely reddish clayey soil developed from a Quaternary laterite parent material and granitic sandy soil developed from a granite parent material, were selected. Six treatments with different dosage of biochar (0, 1%, 2%, 4%, 6%, and 8% of the soil mass，0-20 cm soil depth) were set. Rice pot experiments were conducted in 2020 to study the effects of different application rates of Triarrhena lutarioriparia biochar on rice nutrient utilization characteristics in two typical soils. The results showed different application rates of Triarrhena lutarioriparia biochar and soil types had certain effects on dry matter accumulation and nutrient uptake by rice organs and aboveground structures. With the addition of biochar, compared with the treatment without biochar, the accumulation of dry matter of rice increased from 0.6% to 18.6% and from 15.5% to 42.4% in the granitic sandy soil and reddish clayey soil, respectively. With the addition of 4% biochar, the accumulation of nitrogen, phosphorus, and potassium nutrients in the rice plant of the treatment increased by 8.6%, 10.5%, and 82.5% in the granitic sandy soil and by 33.8%, 100.0%, and 125.3% in the reddish clayey soil, respectively. The quadratic regression equation and fertilizer – carbon coupling model fitting showed that the optimal addition amounts of biochar in the granitic sandy soil and reddish clayey soil were 2.51% and 4.80% for nitrogen utilization, 4.33% and 7.03% for phosphorus utilization, and 4.67% and 4.81% for potassium utilization, respectively. Therefore, the application of Triarrhena lutarioriparia biochar is conducive to promoting the accumulation and growth of nitrogen, phosphorus and potassium nutrients in rice, and the amount of biochar added and soil conditions are important factors affecting the coupling effect of fertilizer and carbon. [ABSTRACT FROM AUTHOR]

Based on the soil temperature and humidity data of soybean farmland under conservation tillage in Northeast China in the published article, the impact of conservation tillage measures on the soil hydrothermal status of soybean farmland in Northeast China was quantitatively assessed by using conventional tillage (CT) as a control, no-tillage (NT), reduced tillage (RT), straw mulching (SM), and no-till straw mulching (NTSM) as treatments. The results showed: compared with CT, conservation tillage increased the soil volume water content of 0-170cm soil layer in soybean farmland in Northeast China by 9.2%, and reduced the temperature of the shallow soil layer (0-30cm) by 8.2%. Four conservation tillage could increase soil moisture under different climatic conditions; straw mulching could increase soil moisture content throughout the growth period of soybeans, and the effect on soil hydrothermal was greatest during the nutrition period of soybean, and soil temperature increased with the increase of straw mulching; the magnitude of soil temperature reduction by conservation tillage decreases with the decrease of soil clay particles, the magnitude of soil moisture increased by conservation tillage decreases with the increase of soil depth. Among them, NTSM at different soil depths was the most obvious effect of water storage and moisture retention, and the soil moisture in the soil layer of 0-20cm was increased by 32.9%. In summary, conservation tillage could increase soil moisture but reduce soil temperatures. Temperature, precipitation, growth period, straw mulching amount, soil type and soil depth all had an impact on soil hydro-thermality in soybean farmland under conservation tillage. [ABSTRACT FROM AUTHOR]

Calcic vertisol is a typical kind of low-yield field with a total area of about 4 million hm2 in China. Calcareous concretion with particle size larger than 2 mm has been one of the representative characteristics of calcic vertisol. The limitation of soil available water is an important reason for crop failure in this region. Therefore, the curve of soil water retention dominates the estimation of available water content. However, most studies focused on the effects of calcareous concretion on soil water retention of calcic vertisol mainly under laboratory conditions. It is lacking that under field conditions. In this study, both field surveys and laboratory experiments were conducted to explore the effect of calcareous concretion distribution in 0-1 m soil profile on soil water retention. Firstly, the spatial distribution of calcareous concretion was investigated in the study plot with 150 m length, 50 m width, and 1 m depth. After then, soil profiles (0-1 m soil depth) were chosen to divide into 5 layers with a 20 cm interval. Disturbed and undisturbed soil samples were collected in each layer. Physicochemical properties were evaluated to measure the distribution of soil particle size, size and content of calcareous concretion, bulk densities of soil, and calcareous concretions. Meanwhile, the curves of soil water retention were determined using high speed centrifuge. A pressure plate method was conducted to measure water retention curves in calcareous concretion. The results showed that the mass contents of clay, silt, and sand were 30.56%-39.75%, 39.88%-45.34%, and 18.67%-24.45%, respectively, which belonged to silty clay soil in the classification standard of the United States Department of Agriculture (USDA). Clayey particles decreased, but sandy particles increased significantly with the increase of soil depth. Calcareous concretion was mainly distributed in the soil depth of >20-100 cm, where the content and size increased as soil depth increased. Calcareous concretions content in the surface soil (0-20 cm) was very low (with mass content 0.02%), where only a few calcareous concretions of 2-5 mm were discovered. The maximum content of calcareous concretion was detected at > 80-100 cm (up to 11.42%), where the calcareous concretion content was 8.04% in the size of >8-30 mm. Soil bulk density ranged from 1.23-1.61 g cm-3. The densities of calcareous concretions were 2.01, 2.21, and 2.23 g cm-3 with the size of 2-5 mm, >5-8 mm, and >8-30 mm, respectively. Soil bulk density increased along with the calcareous concretion content increasing. Water retention curves of soil and calcareous concretion were well fitted by the van Genuchten model, with the determination coefficient larger than 0.95. The saturated water content of surface soil (0-20 cm) was significantly higher than that of 20-100 cm soil. Nevertheless, the Gravitational-water content in the surface soil (0-20 cm) was much larger than that in the soil of > 20-100 cm, which was related to macropores formed during tillage. In the subsurface (>20-100 cm), soil gravitational-water content and available water-holding capacity increased with the increase of soil depth, but the field capacity and wilting point decreased. Calcareous concretion maintained a non-negligible amount of water, 0.25, 0.22, and 0.20 cm3 /cm3 in the particles with the size of 2-5 mm, >5-8 mm, and >8-30 mm, respectively. But the water-holding capacities of calcareous concretion were significantly lower than that of soil. The effects of calcareous concretion on water-holding capacity mainly occurred in the subsurface soil. Soil saturated water content, field capacity, and wilting point decreased with increasing calcareous concretion. Interestingly, calcareous concretion content was positively correlated with the soil sand content, but negatively correlated with the soil clay content. Calcareous concretion can bind soil particles together to prevent sand weathering, and thereby effectively improve soil texture. More calcareous concretion led to higher sand contents, and thus increased the available water-holding capacity in soil. This finding can provide a theoretical basis to accurately assess the soil water-holding capacity in calcic vertisol for precision irrigation and high crop productivity. [ABSTRACT FROM AUTHOR]

Rice-wheat rotation area, with heavy clay soil texture, that it is wheat planting area accounts for more than 37% of the total wheat sowing area in China as one of the major grain production bases, and rice-wheat rotation is the main cropping pattern in this region. Meanwhile, because of the shortage crop stubble and more rainfall in autumn, which lead to serious wet damage during the tilling and seeding stage for this field. Currently, most of the existing no-tillage and less-tillage seeding equipment for wheat sowing in rice stubble areas were optimized and developed on the basis of traditional contact-type wheat seeding technology, which lead to adhesion and serious blockage phenomenon, as well as increasing of operating resistance and power consumption during working. Therefore, a innovative technical proposal of non-contact type pneumatic seeding technology that could avoid contacting between sowing parts and soil was introduced in this paper, which in order to solve the problems of soil adhesion, blockage, drag increment as well as poor sowing quality for wheat seeders under the condition of sticky heavy loam clay in rice-wheat rotation areas. Experiment that utilized a self-made platform for wheat pneumatic seeding was conducted, which could rip wheat seed into the soil condition of clean seed bed without straw and stubble mulching by high pressure accelerating airflow. During the pneumatic seeding experiment, keeping a certain pneumatic seeding height HG and incident angle α between the accelerating tube and topsoil surface, high-pressure gas was injected from the upper apex of the air nozzle and ejected from the bottom of it, which a stable high-speed airflow was formed in the accelerator tube (the length of the accelerator tube is 600 mm and the diameter is 10 mm). Then wheat seeds were put into the seed entrance and absorbed at a high speed under the negative air pressure of the ejector, during which the rubber sleeve could protect wheat seeds from damaging. After mixing with airflow, wheat seeds were accelerated by high-speed air flow in the accelerating tube. Finally, the wheat seeds flew out and ripped into the soil at a certain incident angle and high pneumatic seeding velocity. At the same time, high-speed photography technology was used to study the parameters of pneumatic seeding velocity, vertical velocity and pneumatic seeding depth under six levels (15°, 30°, 45°, 60°, 75°, 90°) of incident angles, and pneumatic seeding experiments under five different accelerating air pressures of 0.2 MPa, 0.4 MPa, 0.6 MPa, 0.8 MPa and 1 MPa for each incident angle were carried out respectively. Pneumatic seeding experimental results showed that: For pneumatic seeding in soil without straw and stubble mulching, when the incident angle increases continuously, wheat seeds can achieve higher vertical component of pneumatic seeding velocity deeper and pneumatic seeding depth at the same accelerating air pressures, the probability of horizontal slip and bounce of wheat seeds after touching soil show an decreasing trend, and pneumatic seeding depth has a positive correlation with pneumatic seeding velocity under each incident angle. Moreover, wheat seeds show various pneumatic seeding depth and soil impact effect without damage after pneumatic seeding. When the incident angles and the vertical component of pneumatic seeding velocity were more than 45° and 25 m/s respectively, wheat seeds can be completely ripped into the soil and the emergence rate is more than 86%. The best pneumatic seeding effect achieved as incident angle is 90°. In order to realize wheat vertical pneumatic seeding in field operation, the horizontal component of pneumatic seeding velocity should be equal to the operating speed of seeder and the vertical component of pneumatic seeding velocity should be greater than 25 m/s, which the seeder operating speed shows positively and negatively correlated with pneumatic seeding velocity and incident angle, respectively. The experimental results can provide basic data and technical support for the development of non-contact wheat seeding equipment in rice-wheat rotation area. [ABSTRACT FROM AUTHOR]

[Display omitted] • High soil P content was found in eastern and northern subtropical China. • Soil clay strongly and negatively affected regional-scale variation in soil P. • Humidity index and DBH indirectly affected soil available P via soil clay content. • Extending the rotation period benefits the recovery of soil P availability. Evaluating the environmental effects on soil phosphorus (P) availability is the key to understanding P cycling and regulating forest productivity. However, what and how environmental factors affect soil P availability in regional plantation ecosystems remains unclear. The study evaluated the effects of climatic factors, nitrogen deposition rate, stand attributes, litter characteristics, and soil-associated properties on soil P availability in Masson pine plantations across subtropical China using stepwise regression and structural equation modelling (SEM) analyses. At the 0–20 cm and 20–40 cm soil depths, soil total P ranged from 0.24 to 0.43 g kg−1 and from 0.24 to 0.48 g kg−1, respectively. Similarly, soil available P varied from 0.35 to 7.55 mg kg−1 and from 0.14 to 4.34 mg kg−1, respectively. Soil total and available P had high values in the eastern and northern distribution areas of subtropical China. Soil total P linearly decreased with an increase in bulk density, clay and pH but linearly increased with an increase in DBH. These four factors had a similar contribution (15.5–35.1 %) to soil total P. Soil available P linearly decreased with an increase in bulk density and clay. The relative contribution of clay (48.1–75.7 %) to soil available P was higher than that of bulk density (16.2–33.5 %). Soil total P decreased during the initial 30 years of plantations and then increased. But other variables (e.g., climate, nitrogen deposition, and litter) had no significant impacts on soil P. Overall, the SEM explained 35.4 % and 28.1 % of soil available P variations at the 0–20 cm and 20–40 cm soil depths, respectively, and revealed that clay had strong total effects (β = -0.526 and −0.396) on the soil available P. These results reveal the dominant roles of soil texture (especially clay) in affecting soil P availability in Masson pine plantations and suggest that extending the rotation period benefits soil P recovery in pine plantation ecosystems of subtropical China. [ABSTRACT FROM AUTHOR]

This study aimed to improve runoff simulations and explore deep soil hydrological processes for a watershed in the center of the Loess Plateau (LP), China. This watershed, the Wuding River Basin (WRB), has very complex topography, with soil depths ranging from 0 to 197 m. The hydrological model used for our simulations was the Community Land Model (CLM) version 5 developed by the National Center for Atmospheric Research. Actual soil depths and river channels were incorporated into CLM to realistically represent the physical features of the WRB. Through sensitivity tests, CLM with 150 soil layers produced the most reasonable results and was adopted for this study. Our results showed that CLM with actual soil depths significantly suppressed unrealistic variations of the simulated sub-surface runoff when compared to the default simulations with a fixed soil depth of 8 m. In addition, CLM with higher-resolution soil layering slightly improved runoff simulations, but generated simulations with much smoother vertical water flows that were consistent with the uniform distribution of soil textures in our study watershed. The runoff simulations were further improved by the addition of river channels to CLM, where the seasonal variability of the simulated runoff was reasonably captured. Moreover, the magnitude of the simulated runoff remarkably decreased with increased soil evaporation by lowering the soil water content threshold, which triggers surface resistance. The lowered threshold was consistent with the loess soil, which has a high sand component. Such soils often generate stronger soil evaporation than soils dominated by clay. Finally, with the above changes in CLM, the simulated total runoff matched very closely with observations. When compared with those for the default runoff simulations, the correlation coefficient, root-mean-square error, and Nash Sutcliffe coefficient for the improved simulations changed dramatically from 0.02, 10.37 mm, and -12.34 to 0.62, 1.8 mm, and 0.61. The results in this study provide strong physical insight for further investigation of hydrological processes in complex terrain with deep soils. [ABSTRACT FROM AUTHOR]