Search

The advanced metering infrastructure (AMI) is an architecture for two-way communication between electric, gas and water meters and city utilities. The AMI network is a wireless sensor network that provides communication for metering devices in the neighborhood area of the smart grid. Recently, the applicability of a routing protocol for low-power and lossy networks (RPL) has been considered in AMI networks. Some studies in the literature have pointed out problems with RPL, including sub-optimal path selection and instability. In this paper, we defend the viewpoint that careful planning of the transmission power in wireless RPL networks can significantly reduce the pointed problems. This paper presents a method for planning the transmission power in order to assure that, after convergence, the size of the parent set of the RPL nodes is as close as possible to a predefined size. Another important feature is that all nodes in the parent set offer connectivity through links of similar quality. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSN) are being increasingly used for data acquisition and control of remote devices. However, they present some constraints in critical and large-scale scenarios. The main limitations come from the nature of their components, such as lossy links, and devices with power supply limitations, poor processing power and limited memory. The main feature of software-defined networks (SDN) is the separation between the control plane and the data plane, making available a logically unified view of the topology in the controllers. In this way, it is possible to build network applications that take into account this unified view, which makes the SDN an alternative approach to solve the mentioned limitations. This paper presents the SD6WSN (software-defined 6LoWPAN wireless sensor network) architecture, developed to control the behavior of the data traffic in 6LoWPAN according to the SDN approach. It takes into account the specific characteristics of WSN devices, such as low data transfer rate, high latency, packet loss and low processing power, and takes advantage of the flexibility provided by flow-based forwarding, allowing the development of specific networking applications based on a unified view. We provide a detailed description of how we have implemented SD6WSN in the Contiki operating system. The new architecture is assessed in two experiments. The first considers a typical advanced metering infrastructure (AMI) network and measures the overhead of SD6WSN control messages in configurations involving different path lengths. The results indicate that the overhead introduced is not excessive, given the advantages that the SDN approach can bring. The second considers a grid-topology to evaluate the average latency of the peer-to-peer communication. It was observed that the average latency in the SD6WSN is considerably lower than that obtained with standard 6LoWPAN, showing the potential of the proposed approach. [ABSTRACT FROM AUTHOR]