Search

Assessment of fetal heart rate (fHR) through non-invasive fetal electrocardiogram (fECG) is challenging task. This study compares the performance of five template subtraction (TS) methods on Labor (12 5-min recordings) and Pregnancy datasets (10 20-min recordings). The methods include TS without adaptation, TS using singular value decomposition (TS SVD ), TS using linear prediction (TS LP ), TS using scaling factor (TS SF ), and sequential analysis (SA). The influence of the chosen maternal wavelet for the continuous wavelet transform (CWT) detector is also compared. The F1 score was used to measure performance. Each recording in both datasets consisted of four signals, resulting in a total comparison of 88 signals for the TS-based methods. The study reported the following results: F1 = 95.71% with TS, F1 = 95.93% with TS SVD , F1 = 95.30% with TS LP , F1 = 95.82% with TS SF , and F1 = 95.99% with SA. The study identified gaus3 as the suitable maternal wavelet for fetal R-peak detection using the CWT detector. Furthermore, the study classified signals from the tested datasets into categories of high, medium, and low quality, providing valuable insights for subsequent fECG signal extraction. This research contributes to advancing the understanding of non-invasive fECG signal processing and lays the groundwork for improving fetal monitoring in clinical settings. [ABSTRACT FROM AUTHOR]

Harmonic estimation is essential for mitigating or suppressing harmonic distortions in power systems. The most important idea is that spectrum analysis, waveform estimation, harmonic source classification, source location, the determination of harmonic source contributions, data clustering, and filter-based harmonic elimination capacity are also considered. The feature extraction method is a fundamental component of the optimization that improves the effectiveness of the Harmonic Mitigation method. In this study, techniques to extract fundamental frequencies and harmonics in the frequency domain, the time domain, and the spatial domain include 67 literature reviews and an overall assessment. The combinations of signal processing with artificial intelligence (AI) techniques are also reviewed and evaluated in this study. The benefit of the feature extraction methods is that the analysis extracts the powerful basic information of the feedback signals from the sensors with the most redundancy, ensuring the highest efficiency for the next sampling process of algorithms. This study provides an overview of the fundamental frequency and harmonic extraction methods of recent years, an analysis, and a presentation of their advantages and limitations. [ABSTRACT FROM AUTHOR]

Fetal phonocardiography (fPCG) is receiving attention as it is a promising method for continuous fetal monitoring due to its non-invasive and passive nature. However, it suffers from the interference from various sources, overlapping the desired signal in the time and frequency domains. This paper introduces the state-of-the-art methods used for fPCG signal extraction and processing, as well as means of detection and classification of various features defining fetal health state. It also provides an extensive summary of remaining challenges, along with the practical insights and suggestions for the future research directions. [ABSTRACT FROM AUTHOR]

Fetal phonocardiography is a non-invasive, completely passive and low-cost method based on sensing acoustic signals from the maternal abdomen. However, different types of interference are sensed along with the desired fetal phonocardiography. This study focuses on the comparison of fetal phonocardiography filtering using eight algorithms: Savitzky-Golay filter, finite impulse response filter, adaptive wavelet transform, maximal overlap discrete wavelet transform, variational mode decomposition, empirical mode decomposition, ensemble empirical mode decomposition, and complete ensemble empirical mode decomposition with adaptive noise. The effectiveness of those methods was tested on four types of interference (maternal sounds, movement artifacts, Gaussian noise, and ambient noise) and eleven combinations of these disturbances. The dataset was created using two synthetic records r01 and r02, where the record r02 was loaded with higher levels of interference than the record r01. The evaluation was performed using the objective parameters such as accuracy of the detection of S1 and S2 sounds, signal-to-noise ratio improvement, and mean error of heart interval measurement. According to all parameters, the best results were achieved using the complete ensemble empirical mode decomposition with adaptive noise method with average values of accuracy = 91.53% in the detection of S1 and accuracy = 68.89% in the detection of S2. The average value of signal-to-noise ratio improvement achieved by complete ensemble empirical mode decomposition with adaptive noise method was 9.75 dB and the average value of the mean error of heart interval measurement was 3.27 ms. [ABSTRACT FROM AUTHOR]

This paper discusses the reduction of background noise in an industrial environment to extend human-machine-interaction. In the Industry 4.0 era, the mass development of voice control (speech recognition) in various industrial applications is possible, especially as related to augmented reality (such as hands-free control via voice commands). As Industry 4.0 relies heavily on radiofrequency technologies, some brief insight into this problem is provided, including the Internet of things (IoT) and 5G deployment. This study was carried out in cooperation with the industrial partner Brose CZ spol. s.r.o., where sound recordings were made to produce a dataset. The experimental environment comprised threeworkplaces with background noise above 100 dB, consisting of a laser/magnetic welder and a press. A virtual device was developed from a given dataset in order to test selected commands from a commercial speech recognizer from Microsoft. We tested a hybrid algorithm for noise reduction and its impact on voice command recognition efficiency. Using virtual devices, the study was carried out on large speakers with 20 participants (10men and 10women). The experiments included a large number of repetitions (100 times for each command under different noise conditions). Statistical results confirmed the efficiency of the tested algorithms. Laser welding environment efficiency was 27% before applied filtering, 76% using the least mean square (LMS) algorithm, and 79% using LMS + independent component analysis (ICA). Magnetic welding environment efficiency was 24% before applied filtering, 70% with LMS, and 75% with LMS + ICA. Press workplace environment efficiency showed no success before applied filtering, was 52% with LMS, and was 54% with LMS + ICA. [ABSTRACT FROM AUTHOR]

Fetal electrocardiography (fECG) is a promising alternative to cardiotocography continuous fetal monitoring. Robust extraction of the fetal signal from the abdominal mixture of maternal and fetal electrocardiograms presents the greatest challenge to effective fECG monitoring. This is mainly due to the low amplitude of the fetal versus maternal electrocardiogram and to the non-stationarity of the recorded signals. In this review, we highlight key developments in advanced signal processing algorithms for non-invasive fECG extraction and the available open access resources (databases and source code). In particular, we highlight the advantages and limitations of these algorithms as well as key parameters that must be set to ensure their optimal performance. Improving or combining the current or developing new advanced signal processing methods may enable morphological analysis of the fetal electrocardiogram, which today is only possible using the invasive scalp electrocardiography method. [ABSTRACT FROM AUTHOR]

This paper introduces a comprehensive fetal Electrocardiogram (fECG) Signal Extraction and Analysis Virtual Instrument that integrates various methods for detecting the R-R Intervals (RRIs) as a means to determine the fetal Heart Rate (fHR) and therefore facilitates fetal Heart Rate Variability (HRV) signal analysis. Moreover, it offers the capability to perform advanced morphological fECG signal analysis called ST segment Analysis (STAN) as it seamlessly allows the determination of the T-wave to QRS complex ratio (also called T/QRS) in the fECG signal. The integration of these signal processing and analytical modules could help clinical researchers and practitioners to noninvasively monitor and detect the life threatening hypoxic conditions that may arise in different stages of pregnancy and more importantly during delivery and could therefore lead to the reduction of unnecessary C-sections. In our experiments we used real recordings from a Fetal Scalp Electrode (FSE) as well as maternal abdominal electrodes. This Virtual Instrument (Toolbox) not only serves as a desirable platform for comparing various fECG extraction signal processing methods, it also provides an effective means to perform STAN and HRV signal analysis based on proven ECG morphological as well as Autonomic Nervous System (ANS) indices to detect hypoxic conditions. [ABSTRACT FROM AUTHOR]

Abdominal fetal ElectroCardioGrams (fECGs) carry a wealth of information about the fetus including fetal Heart Rate (fHR) and signal morphology during different stages of pregnancy. Here we report our results on the implementation and evaluation of two non-adaptive signal processing methods suitable for fECG signal extraction, namely: the Independent Component Analysis (ICA) and the Principal Component Analysis (PCA) Methods. We used the fetal heart rate extracted from fECG signals (in Beats Per Minute - BPM) and Signal-to-Noise Ratio (SNR) as effective performance evaluation metrics for our applied methods. Our findings demonstrated that given adequate SNR, these methods produced excellent results in accurate determination of fHR. Furthermore, we found out that compared to the PCA Method, the ICA Method produces a lower variance in the detection of the fHR. [ABSTRACT FROM AUTHOR]

In this article, we briefly describe the design, construction, and functional verification of a hybrid multichannel fiber-optic sensor system for basic vital sign monitoring. This sensor uses a novel non-invasive measurement probe based on the fiber Bragg grating (FBG). The probe is composed of two FBGs encapsulated inside a polydimethylsiloxane polymer (PDMS). The PDMS is non-reactive to human skin and resistant to electromagnetic waves, UV absorption, and radiation. We emphasize the construction of the probe to be specifically used for basic vital sign monitoring such as body temperature, respiratory rate and heart rate. The proposed sensor system can continuously process incoming signals from up to 128 individuals. We first present the overall design of this novel multichannel sensor and then elaborate on how it has the potential to simplify vital sign monitoring and consequently improve the comfort level of patients in long-term health care facilities, hospitals and clinics. The reference ECG signal was acquired with the use of standard gel electrodes fixed to the monitored person's chest using a real-time monitoring system for ECG signals with virtual instrumentation. The outcomes of these experiments have unambiguously proved the functionality of the sensor system and will be used to inform our future research in this fast developing and emerging field. [ABSTRACT FROM AUTHOR]

As it was mentioned in the previous part of this work (Part I)—the advanced signal processing methods are one of the quickest and the most dynamically developing scientific areas of biomedical engineering with their increasing usage in current clinical practice. In this paper, which is a Part II work—various innovative methods for the analysis of brain bioelectrical signals were presented and compared. It also describes both classical and advanced approaches for noise contamination removal such as among the others digital adaptive and non-adaptive filtering, signal decomposition methods based on blind source separation, and wavelet transform. [ABSTRACT FROM AUTHOR]

Analysis of biomedical signals is a very challenging task involving implementation of various advanced signal processing methods. This area is rapidly developing. This paper is a Part III paper, where the most popular and efficient digital signal processing methods are presented. This paper covers the following bioelectrical signals and their processing methods: electromyography (EMG), electroneurography (ENG), electrogastrography (EGG), electrooculography (EOG), electroretinography (ERG), and electrohysterography (EHG). [ABSTRACT FROM AUTHOR]

Advanced signal processing methods are one of the fastest developing scientific and technical areas of biomedical engineering with increasing usage in current clinical practice. This paper presents an extensive literature review of the methods for the digital signal processing of cardiac bioelectrical signals that are commonly applied in today's clinical practice. This work covers the definition of bioelectrical signals. It also covers to the extreme extent of classical and advanced approaches to the alleviation of noise contamination such as digital adaptive and non-adaptive filtering, signal decomposition methods based on blind source separation and wavelet transform. [ABSTRACT FROM AUTHOR]

Off-the-shelf, consumer-grade EEG equipment is nowadays becoming the first-choice equipment for many scientists when it comes to recording brain waves for research purposes. On one hand, this is perfectly understandable due to its availability and relatively low cost (especially in comparison to some clinical-level EEG devices), but, on the other hand, quality of the recorded signals is gradually increasing and reaching levels that were offered just a few years ago by much more expensive devices used in medicine for diagnostic purposes. In many cases, a well-designed filter and/or a well-thought signal acquisition method improve the signal quality to the level that it becomes good enough to become subject of further analysis allowing to formulate some valid scientific theories and draw far-fetched conclusions related to human brain operation. In this paper, we propose a smoothing filter based upon the Savitzky–Golay filter for the purpose of EEG signal filtering. Additionally, we provide a summary and comparison of the applied filter to some other approaches to EEG data filtering. All the analyzed signals were acquired from subjects performing visually involving high-concentration tasks with audio stimuli using Emotiv EPOC Flex equipment. [ABSTRACT FROM AUTHOR]

Over the last few decades, the Brain-Computer Interfaces have been gradually making their way to the epicenter of scientific interest. Many scientists from all around the world have contributed to the state of the art in this scientific domain by developing numerous tools and methods for brain signal acquisition and processing. Such a spectacular progress would not be achievable without accompanying technological development to equip the researchers with the proper devices providing what is absolutely necessary for any kind of discovery as the core of every analysis: the data reflecting the brain activity. The common effort has resulted in pushing the whole domain to the point where the communication between a human being and the external world through BCI interfaces is no longer science fiction but nowadays reality. In this work we present the most relevant aspects of the BCIs and all the milestones that have been made over nearly 50-year history of this research domain. We mention people who were pioneers in this area as well as we highlight all the technological and methodological advances that have transformed something available and understandable by a very few into something that has a potential to be a breathtaking change for so many. Aiming to fully understand how the human brain works is a very ambitious goal and it will surely take time to succeed. However, even that fraction of what has already been determined is sufficient e.g., to allow impaired people to regain control on their lives and significantly improve its quality. The more is discovered in this domain, the more benefit for all of us this can potentially bring. [ABSTRACT FROM AUTHOR]

This paper focuses on a thorough summary of vital function measuring methods in vehicles. The focus of this paper is to summarize and compare already existing methods integrated into car seats with the implementation of inter alia capacitive electrocardiogram (cECG), mechanical motion analysis Ballistocardiography (BCG) and Seismocardiography (SCG). In addition, a comprehensive overview of other methods of vital sign monitoring, such as camera-based systems or steering wheel sensors, is also presented in this article. Furthermore, this work contains a very thorough background study on advanced signal processing methods and their potential application for the purpose of vital sign monitoring in cars, which is prone to various disturbances and artifacts occurrence that have to be eliminated. [ABSTRACT FROM AUTHOR]

This paper covers a brief review of both the advantages and disadvantages of the implementation of various smoothing filters in the analysis of electroencephalography (EEG) data for the purpose of potential medical diagnostics. The EEG data are very prone to the occurrence of various internal and external artifacts and signal distortions. In this paper, three types of smoothing filters were compared: smooth filter, median filter and Savitzky–Golay filter. The authors of this paper compared those filters and proved their usefulness, as they made the analyzed data more legible for diagnostic purposes. The obtained results were promising, however, the studies on finding perfect filtering methods are still in progress. [ABSTRACT FROM AUTHOR]

Fetal electrocardiography is among the most promising methods of modern electronic fetal monitoring. However, before they can be fully deployed in the clinical practice as a gold standard, the challenges associated with the signal quality must be solved. During the last two decades, a great amount of articles dealing with improving the quality of the fetal electrocardiogram signal acquired from the abdominal recordings have been introduced. This article aims to present an extensive literature survey of different non-adaptive signal processing methods applied for fetal electrocardiogram extraction and enhancement. It is limiting that a different non-adaptive method works well for each type of signal, but independent component analysis, principal component analysis and wavelet transforms are the most commonly published methods of signal processing and have good accuracy and speed of algorithms. [ABSTRACT FROM AUTHOR]