Search

Sandwich structures with a soft core typically exhibit multiple deformation modes such as bending, twisting and compression when subjected to transverse loads. Compressive behavior of soft core significantly affects the structural response, which is usually neglected in conventional plate theories. Additionally, conventional plate theories do not take into account transverse shear stress continuity. In order to address this concern and precisely characterize the characteristics of arbitrary multilayer laminated structures, a novel electromechanical coupled finite element model is developed. This model is based on a compressible layerwise third-order shear deformation theory with a soft core. Notably, the proposed model theory requires only twelve degrees of freedom for each quadratic element node. The accuracy of the model is validated first. Afterwards, several numerical investigations are carried out for piezolaminated sandwich structures with different width-to-thickness ratios, reinforcement angle and skew angle. The results demonstrate the applicability of the current model in predicting the behavior of laminated sandwich plates. [ABSTRACT FROM AUTHOR]

Sandwich structures with thick soft cores subjected to transverse loads are usually resulting in deformations with various modes, including bending, twisting and compressing. In addition, the compression of the core results in a significant influence of the structural response. All classical plate theories are inadequate in predicting the behavior sandwich structures with thick soft core due to the assumption of no thickness change during deformation. To overcome this issue, a hybrid first/third-order shear deformation hypothesis with consideration of compressive effect is proposed for sandwich structures with thick soft cores. The first-order shear deformation theory is applied to both the top and bottom layers, while a refined third-order shear deformation theory that releases the assumption of no thickness change is developed for the thick soft cores. An eight-node quadrilateral plate element with twelve degrees of freedom including compressible displacements is created for finite element modeling. Based on the proposed refined hybrid first/third-order theory, a finite element model is developed using the Hamilton's principle. The numerical model is first validated by the computational results of sandwich structures using commercial software. Then, the influences of various parameters on static displacements, vibrations and compressive deformations are systematically investigated, including e.g. boundary conditions, thickness of the core and face layers, elastic modulus of the core layer and the plate size. The present finite element modeling approach provides a powerful tool to accurately investigate the mechanical response of sandwich structures. [ABSTRACT FROM AUTHOR]