Search

The purpose of this research is to perform and verify the “modified 50° preparation” suggested by the authors. This procedure was performed with a scrupulous standardization of the tooth’s preparation and then of the laboratory techniques to produce a metal-ceramic crown, and the same for the crown cementation technique of on the preparation of the original sample. After the esthetic evaluations, the obtained sample was included in EPON resin and sectioned in the lingual-vestibular sense. The sections were then observed with an optical microscope in different magnifications for the final evaluations. The geometric design proposed presents the advantages of two great preparation techniques: 50° preparation and circumferential shoulder. The 50° bevel designed in first phase of preparation and the second phase of the circumferential 27° shoulder, together allowed to satisfy the following requirements: aesthetic, marginal accuracy, periodontal compliance, conservation and stability. However, this type of prosthetic preparation is not the only one, but it is one of the marginal designs in prosthetic dentistry.

Bone is a complexly structured tissue and hierarchically organized from macro to nano levels of dimensions. Biomaterial devices developed to replace and interact with bone tissues have been designed from the macro to nano perspective to provide suitable performance in acquiring primary and biological stability. Macro level designed features provide mechanical interlock and primary stability to implants inside the bone. Surface micro and nano structures influence cells behavior to promote the secondary or biological stability, reaching succesfull osseointegration.

In patients with oral-nasal communication the absence of alveolar and/or palatal hard and soft tissue, or contraction resulting from previous surgical repair, needed prosthetic rehabilitation. This clinical report describes a treatment of an oral-nasal communication through a mixed prosthetic rehabilitation, fixed and removable, with attachments performed by EDM technique.

CHARGE is an acronym referring to the aspects of this rare syndromic condition. Patients with CHARGE association are today considered as subjects lacking in pathognomonic dental alterations. The present study is aimed at adding to the body of evidence of the cases reported in literature and the continuous clinical research which show a clinical picture which is strongly associated with patients afflicted by this syndrome.We report a case-series of 8 patients with CHARGE syndrome. The dental features associated with CHARGE syndrome are from case-reports, but without a congruity that can lead to a definition of the dental condition typical of the CHARGE phenotype.The systemic problems affecting these patients are predominant in compromising their quality of life: this is the reason for a frequent lack of a diagnostics and interceptive phase, relative to oral diseases. We report new oral pathological conditions affecting CHARGE patients. Knowledge of these pathological conditions may induce dentists to carry out specific diagnoses of these patients, thus, avoiding the deterioration of oral conditions.

With our study we wanted to compare the diagnostic accuracy of conventional radiography (orthopanoramic and intraoral radiography) and Cone Beam CT (CBCT) for the diagnosis of periapical lesions on the posterior elements of the upper maxilla endodontically treated.The images were analyzed by a radiologist and an endodontist whose interpretation of radiological examinations is unique. Were examined 34 molars (23 first molars and 13 second molars) with a total of 102 roots. The CBCT detected a significantly higher number of lesions (43%, p0.001) compared to conventional radiography. Our results demonstrate that the CBCT can be inserted into the diagnostic routine for the evaluation of all pre-prosthetic posterior elements of the upper jaw endodontically treated in addition to the diagnostic techniques 2D, especially when in the treatment plan is provided the realization of an abutment. The CBCT, which has reduction of cost and absorption of radiation with respect to the conventional CT, is also very useful even when there is a need to perform a surgical treatment-endodontic (apicectomy) of a lesion diagnosed with 2D techniques.

Prosthetic-restorative approach for the restoration of tooth wear. Case report

The aim of the present study was to compare two implant surfaces, the TiOblast (Astra Tech) surface, manufactured by blasting the surface and already present in literature and the Osseospeed (Astra Tech) surface, manufactured by blasting and treating the surface with fluoride ions and recently launched onto the market with the modified surfaces of the latest generation. This study is part of a more extensive research project whose protocol required the insertion of 10 couples of implants; thus in the present discussion partial data are being taken into consideration, with an eye at collecting more data in the future, regarding both microscopy and histomorphometric histological analysis on 5 couples of implants. The purpose of the study is to investigate how the modified surfaces of the latest generation can guarantee a greater osseointegration both from a qualitative and quantitative level compared to the surfaces presently used and that they may represent the first example of "bioactivity", that is, an active interaction with the processes of new bone formation and tissue healing.

The aim of this study is to evaluate the short time aesthetic and functional outcome of a new implant system, the Nobel Active™. The Nobel Active™ features several innovations such as an extensive self-drilling capacity, axial and radial bone compression and an inward tapered collar allowing for marginal bone maintance an soft tissue stabilization. This design makes it possible to place the implant into narrower osteotomies, thus requiring less drilling, compared to conventional implants. The Nobel Active™ implants are available in two different prosthetic connections: Internal connection and external connection. The Nobel Active™ External connection is a 1.5 piece implant, with a primary abutment included with the implant. The Nobel Active™ internal connection is a two piece implant with a standard hexagonal internal connection. In this study we present a single tooth replacement with immediate loading of Nobel Active External connection.

The advent of modern endosseous implant design and improved surface technology has allowed the development of new restorative techniques that decrease patient's total treatment time. Utilizing the latest scanning, CAD/CAM and manufacturing technolgies we are able to manufacture individualized dental restoration with high accuracy and a perfect precision of fit.This report describes the rehabilitation of a completely edentulous patient utilizing a CT-based implant planning with computer-assisted surgical design, simultaneous CAD/CAM fabrication of a surgical template, a flapless surgical placement of the implants, and a prefabricated fixed complete denture for an immediately loaded restoration according to Nobel Biocare's Teeth-in-an-Hour™ (Nobel Biocare Goteborg, Sweden) protocol. This systematic approach to full mouth rehabilitation reduces the time necessary for an edentulous patient to go from severely atrophic alveolar support to implant retained prosthetic restoration. These aspects of minimally invasive and simplified surgery, along with reducing the treatment time and postsurgical discomfort, are beneficial to the patient, and allowing for rehabilitation with the same level of success as in flap surgery.The Teeth-in-an-Hour protocol is a unique solution made possible by the Procera System. With the aid of the CT scans and a virtual planning software, a custom fabricated precision drill guide and a pre-manufactured prosthesis can be made before surgery. The execution of implant placement is performed with a flapless procedure that results in minimal surgical intervention. This results in a short and non-traumatic surgery with a minimum of postoperative complications, allowing the patient to leave the chair with a fixed prosthesis. Utilizing the latest scanning, CAD/CAM and manufacturing technologies the dental team is able to develop individualized zirconia full arch framework with high accuracy and precision of fit.

Implant supported rehabilitation of thin edentulous ridges with horizontal atrophy necessitates a regenerative approach. Within the procedures for horizontal bone defects augmentation, ridge expansion techniques permit dislocation of the buccal bone plate in a labial direction and simultaneous implant insertion in single-stage surgery, abbreviating overall treatment time.

The aim of this study is to describe the current role of imaging in pre-surgical planning, reporting 25 cases of paranasal sinus tumors examined in our Institute. Between June 2006 and May 2008, we identified 25 patients with malignant tumors of the paranasal sinuses. All of the patients were evaluated with CT and/or MR exams. US were used to assess regional lymph node involvement. When necessary CT-PET scanning using FDG, was done. Diagnostic imaging is essential during the initial work-up of a patient suspected of having a paranasal sinus tumor. The role of imaging is to define the tumor extension, nodal involvement, metastases and recurrences in the postoperative patient. CT and MR imaging are the primary modalities employed; each have advantages and disadvantages but tend to be complementary. The involvement of fine bone structures is best evaluated with CT. In assessing the extent of the tumor, MR provides excellent soft tissue detail, allowing for delineation of neoplasm from surrounding inflammatory tissue and secretions. For evaluation of lymph node enlargement color-Doppler US, CT and MR provide morphologic data, while CT-PET provides metabolic data. CT-PET can be used to stage nodal and metastatic disease and for assessing the efficacy of therapy or recurrent disease.

Aim of the work was to execute a review of the international literature about the cementation of zirconia restorations, analyzing the properties of the cements most commonly used in clinical activities.It was performed, through PubMed, a bibliographic search on the international literature of the last 10 years using the following limits: studies in English, in vitro studies, randomized clinical trial, reviews, meta-analysis, guide-lines. Were excluded from the search: descriptive studies, case reports, discussion articles, opinion's leader.From studies results that common surface treatments (silanization, acid etching) are ineffective on zirconia because it has an inert surface without glassy component (on which this surface treatments act primarily), instead the sandblasting at 1atm with aluminium oxide (Al(2)O(3)) results significantly effective for the resulting roughening that increase the surface energy and the wettability of the material. Furthermore it has been shown that zinc phosphate-based cements, Bis-GMA-based and glass-ionomer cements can't guarantee a stable long-term adhesion, instead resin cements containing phosphate monomer 10-methacryloyloxyidecyl-dihyidrogenphosphate (MDP) have shown higher adhesion and stability values than the other cements. In particular, it has seen that bond strength of zirconia copings on dentin, using MDP-based cement, is about 6,9MPa; this value is comparable to that obtained with gold copings cementation.ANALYZED STUDIES HAVE LED TO THE FOLLOWING CONCLUSIONS: sandblasting with aluminium oxide (Al(2)O(3)) is the best surface treatment to improve adhesion between resin cements and zirconia; resin cements containing phosphate ester monomers 10-methacryloyloxyidecyl-dihyidrogenphosphate (MDP) have shown in the studies an higher bond strength and stability after ageing treatment; the best procedure for cementing zirconia restorations results the combination of sandblasting with aluminium oxide (Al(2)O(3)) at 50μm and MDP-based cements.