Search

Laser powder bed fusion (LPBF) includes a few printing techniques widely used, in recent years, concerning the additive manufacturing of Ti6Al4V alloys. These produced parts, typically utilized in sectors such as aerospace and biomedical, are characterized by very high added value. It is therefore fundamental to identify the influence of process parameters typical of LPBF technology on the occurrence of warping leading to process failure. This study deals with the characterization of single-track and “micro-scale” level warping phenomena which may lead to protrusion of material over the powder bed and process failure before normal termination. This phenomenon was investigated as a function of process parameters, referring also to the strength and ductility characteristics of the manufactured samples. With this purpose, several samples were printed using variable process parameters both in terms of line energy density (LED) values and in terms of laser power and speed combinations such as to guarantee constant LED values. For the samples that did not show significant micro-warping phenomena, in addition to the transversal and longitudinal geometric characterization of the single track, tensile tests were performed to determine both the resistance of the material and the ductility characteristics. The single tracks, for given process parameters, were printed on a homogeneous material substrate. For every single track, a microstructural and morphological transverse and longitudinal characterization has been carried out and the measured geometrical features were correlated to the process parameters. The obtained results allowed the identification of a new threshold parameter, indicating the limit operating conditions beyond which significant warping phenomena and process failure occur.

Laser powder bed fusion is one of the additive manufacturing technologies which has developed more rapidly in recent years as it enables the production of very complex geometries. Titanium alloys are among the most popular materials in the aerospace industry thanks to excellent mechanical and corrosion resistance. The corrosion behavior and mechanical properties of samples made of Ti6Al4V and characterized by the geometrical features typical of brackets were investigated taking into account the effects of process parameters on porosity and microstructure. A comparison between the corrosion resistance of samples with complex geometry (3D) and specimens characterized by simple geometry (FLAT) was carried out to understand the role of the part geometry in the passive film formation mechanism, also highlighting the effect of the lack of passivation film formed naturally by exposure to air. Finally, the samples with complex geometry were anodized in a fluoride-free aqueous solution and the corrosion resistance was evaluated.

Magnesium alloys, because of their good specific material strength, can be considered attractive by different industry fields, as the aerospace and the automotive one. However, their use is limited by the poor formability at room temperature. In this research, a numerical approach is proposed in order to determine an analytical expression of material formability in hot incremental forming processes. The numerical model was developed using the commercial software ABAQUS/Explicit. The Johnson-Cook material model was used, and the model was validated through experimental measurements carried out using the ARAMIS system. Different geometries were considered with temperature varying in a range of 25–400 °C and wall angle in a range of 35–60°. An analytical expression of the fracture forming limit, as a function of temperature, was established and finally tested with a different geometry in order to assess the validity.

Ultrafine grained (UFG) materials are of great potential in industry due to their enhanced mechanical strength and other promising features, such as ability to superplastic deformation or excellent corrosion resistance. Nevertheless, one of the main limitations lies in their low thermal stability, which leads to excessive grain growth at elevated temperature. It influences mainly further processes performed at high temperature, such as joining. It causes detrimental problems during conventional fusion welding, as significant grain growth is observed and therefore the advantages as a result of small average grain size disappear. Therefore, the idea of applying solid state joining process seems to be suitable for UFG materials. Among the group of solid state welding processes there are methods based on friction. One of these methods, which is suitable for samples in the form of rectangular bars, is linear friction welding (LFW). Present study is the first comprehensive work describing the results of UFG aluminium welded using LFW method with additional emphasis put on a position of shear planes of welded samples. The results have shown, that UFG regime has not been preserved in a weld zone. Welding of UFG sample with an average grain size of 1 μm resulted in a grain growth in weld zone to 1.6−2 μm. Chosen parameters allowed to weld samples only locally, nevertheless, results from tensile tests performed on mini samples showed a great potential of the LFW method for joining UFG samples. The tensile strength of welds was in the range of 83–90 % of initial material.

In recent years, the aircraft industry has shifted its preference for metal parts to titanium and its alloys, such as the high-strength Titanium Grade5 alloy. Because of Titanium Grade 5 limited formability at ambient temperature, forming operations on this material require high temperatures. In these conditions, a peculiar microstructure evolves as a result of the heating and deformation cycles, which has a significant impact on formability and product quality. On the other hand, additive manufacturing technologies, as selective laser melting and electron beam melting, are increasingly being used and are replacing more traditional approaches such as machining and forging. Fundamental parts characteristics as mechanical and microstructural properties, geometric accuracy and surface quality strongly depend on the selection of the manufacturing method. The authors of this paper seek to identify the strengths and limitations imposed by the intrinsic characteristics of different manufacturing alternatives for the production of parts of aeronautical significance, providing guidelines for the choice of the most appropriate manufacturing route for given application and part design.

This work aims at evaluating the mechanical performance of joints in an AA6016 alloy, manufactured by means of two alternative processes: friction stir welding and adhesive bonding. Given its wide use in industrial fields such as automotive and aeronautics, an overlap configuration of joints was selected for the study, and a specific method based on the overlap length evaluation has been developed to allow comparisons among the cases. Two substrate thicknesses are considered in order to vary the overall joint stiffness, and the effect of such geometrical parameter on the mechanical behavior of the joined system is experimentally investigated. The experimental findings highlight that the stiffness of the joint may emphasize the effect of inherent defects due to process, severely affecting the mechanical and failure behavior of overlap-configured joints under static- or cyclic-load conditions.

Explosion welding (EXW) is a solid-state joining process used to produce lap joints out of metal plates of dissimilar materials. During the process, a controlled explosive detonation results in a pressure wave pushing one of the plates to be welded, called flyer, against the other with high velocity. The high pressure and temperature generated, because of the impact energy decaying into heat, create the conditions for solid bonding phenomenon to take place. Due to the complexity of experimental tests, numerical simulation is considered a fundamental design tool for the process. Different approaches are found in literature to simulate the process. In this paper, a dual step Lagrangian–Eulerian approach is proposed to evaluate the effect of different explosives on the final quality of the weld. The numerical model was developed using the commercial software ABAQUS. A three dissimilar materials joint is considered, made of two outer plates of AA5083 aluminum alloy and A516 steel, respectively, and an intermediate layer made of AA1050 aluminum alloy. The model was first validated by comparing the wavy profile of the intermediate layer after the weld, and then used to evaluate the effect of different explosive by analyzing the distribution of the main process parameters as well as the presence of voids.

This paper describes magnetic field-assisted single-point incremental forming (M-SPIF) with a Nd-Fe-B magnet ball tool. In M-SPIF, the tool driven by magnetic force plastically deforms a sheet. The polarity of the magnet tool helps to make the magnetic force (i.e., forming force) more controllable. In creating a truncated cone, the direction of the magnetic force gradually points more outward as the process progresses, and material is forced outwards from the cone center, increasing thinning in M-SPIF, while the cone center remains undeformed in traditional SPIF. Moreover, M-SPIF creates less localized plastic strain than traditional SPIF while forming the desired geometry.

In the last decades, different techniques were proposed to join aluminum sheets with composites materials. Each of them has advantages and weak points over the others and new techniques and patents are continuously developed to overcome these difficulties. In this paper an experimental and numerical investigation on a new Friction Stir Welding based approach to mechanically join AA6082-T6 to self-reinforced polypropylene is presented. The aluminum sheet is pre-holed along both the sides of the weld line and a pinless tool generates the heat and pressure needed to prompt back-extrusion of the composite. New experimental fixtures and hole designs were investigated in order to enhance the mechanical resistance of the joints and a numerical model was set up to study the process mechanics.

Friction Stir Processing (FSP) has been demonstrated feasible to create local Metal Matrix Composites (MMCs) in light alloys matrix. In this research, local MMCs were produced contextually to the weld using Friction Stir Welding (FSW). SiC particles were added to AA7075 lap joints by creating a proper groove on the top surface of the bottom sheet. Different welds were produced with increasing number of tool passes. The effect of the multiple passes was investigated through shear tests, macro and micro observations, average grain size and microhardness measurements. The welded joints were compared to a reference weld produced with no reinforcements. It was found that poor mixing between matrix and reinforcement phase is obtained with one tool pass. On the contrary, proper mixing is obtained with three tool passes, resulting in an increase in the maximum load in shear tests of 50% with respect to the reference conditions.

Friction Stir Welding (FSW) is one of the most used solid-state welding processes in the aeronautical, aerospace, ground transportation and naval fields. Stationary Shoulder Friction Stir Welding (SSFSW) is a recently introduced variant of the process allowing lower heat input into the joints, with beneficial effects in terms of joint mechanical properties, microstructure and top surface finish. In the paper, lap joints produced by SSFSW and made out of AA6082-T6 aluminum alloy sheets have been analyzed with the aim to investigate the effect of the stationary shoulder on the lap joints surface, metallurgical, and mechanical properties. The lap joints produced by SSFSW have been compared to the ones produced by “conventional” FSW in order to highlight the differences between the two processes. The top surface of the joints obtained with the two processes has been quantitatively evaluated. Finally, a dedicated numerical model has been utilized to highlight the causes of the observed differences through the distributions of the main field variables, namely temperature, strain and strain rate. It was found that SSFSW results in narrower weld nugget and smaller areas involved by micro hardness reduction caused by smaller peak temperature and high temperature zone. Additionally, better surface quality was found for the joint welded by SSFSW with lower heights and flash, allowing to avoid subsequent finishing operations needed for most industrial applications.

Conventional metal chips recycling processes are energy-intensive with low efficiency and permanent material losses during re-melting. Solid state recycling allows direct recycling of metal scraps into semi-finished products. It is expected that this process category would lower the environmental performance of metals recycling. Friction Stir Consolidation is a new solid-state technique taking advantage of friction heat generation and severe plastic deformation to consolidate chips into billets. In this research, the feasibility of Friction Stir Consolidation as aluminum chips recycling process is analyzed. Specifically, an experimental campaign has been carried out with varying main process parameters. Three main aspects have been evaluated in order to highlight products quality and environmental impact of the process: (i) metallurgical and mechanical properties of the consolidated products; (ii) primary energy demand, as compared to conventional processes; (iii) forgeability of the consolidated products, as compared to parent material. Results revealed that a proper process parameters selection results in fully consolidated aluminum disk with satisfactory mechanical properties. Also, the new recycling strategy allows substantial energy savings with respect the conventional (remelting based) route.

Tailored blanks characterized by variable thickness were friction stir welded (FSWed) with the aim to obtain constant joint properties along the weld seam, regardless of the thickness change. To pursue this goal, the heat input was kept constant by in-process control of tool rotation. A dedicated numerical model of the process was used to determine the tool rotation values as a function of the sheet thickness. The mechanical properties and the microstructure of the FSWed joints, produced with varying process parameters, were studied. It was found that the proposed approach can produce joints with uniform properties along the weld line in terms of stress–strain curve shape, joint strength, elongation at failure, and microstructure.

Manufacturing processes, as used for discrete part manufacturing, are responsible for a substantial part of the environmental impact of products. Despite that, most of metalworking processes are still poorly documented in terms of environmental footprint. To be more specific, the scientific research has well covered conventional machining processes, concerning the other processes there is a lack of knowledge in terms of environmental load characterization instead. The present paper aims to contribute to fill this knowledge gap and an energetic analysis of Friction Stir welding (FSW) is presented. Following the CO2PE! methodological approach, power studies and a preliminary time study have been performed in order to comply with the In-Depth approach. The influence of the most relevant process parameters is analyzed regarding the required FSW energy. Finally, a few potential improvement strategies to reduce FSW energy consumption are reported.

The manufacturing sector accounts for a high share of global electrical energy consumption and CO 2 emissions, and therefore, the environmental impact of production processes is being more and more investigated. An analysis of power and energy consumption in friction stir welding processes can contribute to the characterization of the process from a new point of view and also provide useful information about the environmental impact of the process. An in-depth analysis of electrical energy demand of friction stir welding is here proposed. Different machine tool architectures, including an industrial dedicated machine, have been used to weld aluminum and steel sheets under different process conditions. The influence of tool rotation and feed rate was investigated. A power study, with breakdown analysis, was carried out to identify the contribution of the main sub-units and to determine the total demand. Different setups have been analyzed in order to identify the conditions resulting in the highest energy and mechanical efficiency. Potential control strategies for energy consumption reduction of FSW process are proposed.

A two-stage approach for the simulation of Linear Friction Welding is presented. The proposed model, developed using the commercial simulation package DEFORM, is 3D Lagrangian, thermo-mechanically coupled. The first phase of the process was modelled with two distinct workpieces, while the remaining phases were simulated using a single-block model. The Piwnik–Plata criterion was set up and used to determine the shifting from the dual object to the single-block model. The model, validated against experimental temperature measurements, is able to predict the main field variables distributions with varying process parameters. Titanium alpha and beta phases evolution during the whole process has been predicted and the obtained results have been correlated to the experimentally measured micro-mechanical properties of the joints.

In the last decades, several direct-recycling techniques have been developed and investigated in order to avoid material remelting, typical of the conventional aluminum alloys recycling processes. Moreover, the remelting step for aluminum recycling is affected by permanent material losses. Solid-state recycling processes have proven to be a suitable strategy to face such issues. Friction Consolidation is an innovative solid state-recycling technology developed for metal chips. During the process, a rotating die is plunged into a hollow chamber containing the material to be processed. The work of friction forces decaying into heat soften the material and, together with the stirring action of the die, enable solid bonding phenomena producing a consolidated metal disc. This technology has been successively applied to metal chips; in this paper, the feasibility of the process to recycle sheet metal scrap is investigated. The quality of the obtained billets is evaluated through morphological observation and hardness measurements.

This paper presents the results of an experimental and numerical campaign on Linear Friction Welding of dissimilar AA2011-T8 and AA6082-T6 aluminum alloys. Experimental tests were carried out with constant oscillation amplitude and process time. Varying oscillation frequency, interface pressure, specimen geometry and mutual position were used. Grain size measurements, HV tests and EDX analysis were considered to characterize the microstructure of the joints as a function of the input process parameters. A thermal numerical model was utilized to predict the temperature profiles in the joints during the process. The obtained results allowed the identification of four weld categories: sound joints, “bonding limit” condition and two different unwelded joints. The investigation of the causes of the different joint behavior permitted to obtain a few design guidelines on the LFW of dissimilar alloys with different geometry.

In the present study, a combined experimental and numerical investigation on Linear Friction Welding (LFW) of AA2011-T3 aluminum alloy was carried out in order to find the temperature dependent shear coefficient to be used in a 3D numerical model of the process. Torque, oscillation frequency and pressure were acquired in order to calculate the shear stress at the interface. A numerical thermal model was used to calculate the temperature at the interface between the specimens starting from experimental temperatures acquired through a thermocouple embedded in the LFW specimens. Finally, the calculated shear coefficient was used to model the contact between the two specimens in a dedicated 3D, Lagrangian, thermo-mechanically coupled rigid-viscoplastic numerical model of the LFW process. A narrow range of variation of the shear factor vs temperature curve was found with varying LFW process parameters and good agreement was obtained for the temperature prediction of the 3D model of the process. Keywords: Linear friction welding, Shear coefficient, FEM model, Aluminum alloys

Friction Stir Extrusion is a novel technique for direct recycling of metal scrap. In the process, a dedicated tool produces both the heat and the pressure to compact and extrude the original raw material, i.e., machining chip, as a consolidated component. A proper fixture was used to carry out an experimental campaign on Friction Stir Extrusion of AZ31 magnesium alloy. Variable tool rotation and extrusion ratio were considered. Appearance of defects and fractures was related to either too high or too low power input. The extruded rods were investigated both from the metallurgical and mechanical points of view. Tensile strength up to 80 % of the parent material was found for the best combination of process parameters. A peculiar 3D helical material flow was highlighted through metallurgical observation of the specimens.

Two different in-process control strategies were developed and compared with the aim to produce AZ31 magnesium alloy joints by friction stir welding on sheet blanks with a non-uniform thickness. To this purpose, sheets with dip or hump zones were welded by either changing the rotational speed or the tool plunging in order to keep constant the value of the vertical force occurring during the welding stage of the process. The influence of the main process parameters on the tool force, the micro- and macromechanical properties, and the joints microstructures in the dip and hump zones were analyzed. The results showed that using the rotational speed change-based approach, the hump zones are subjected to increased heat input with consequent increase of the heat-affected zone extension and average grain size (up to 11 μm). On the contrary, using the tool plunge change-based approach, the weld seam thickness in the dip zones is reduced, resulting in a decreased joint strength, with respect to tool rotation approach, equal to about 18%.

Ultrafine Grained (UFG) metals are characterized by an average grain size of

The production of most mechanical component requires machining operation, thus usually implying the cut material to be wasted as scrap. Traditional recycling techniques are not able to efficiently recycle metal chips because of some critical aspects that characterize such kind of scraps (shape, oxide layers, contaminating residues, etc). Friction Stir Extrusion is an innovative solid state direct-recycling technique for metal machining chips. During the process, a rotating tool is plunged into a hollows matrix to compact, stir and finally, back extrudes the chips to be recycled in a full dense rod. This process results to be particularly relevant since no preliminary treatment of the scrap is required. Experimental campaigns have been carried out in order to investigate the effects on process mechanics of the introduction of silicon carbide micro powders.

Difficult to weld aluminium alloys can be effectively joined by different alternative processes. Friction Stir Welding (FSW), among the solid-state processes and adhesive bonding represent two very attractive techniques. They allow the production of highly resistant joints avoiding the formation of the typical fusion weld defects. The aim of this work is to identify, analyse and compare the mechanical properties of AA6016 aluminium alloy joints made out of 1 mm thick sheets. FSW lap joints were and epoxy bonded joints were produced. Using the FSW results as benchmark, the overlap required in the bonded joint was identified to ensure the same static strength. Once the geometric configurations of the joints are known, the static and dynamic resistance of welds and bonding have been compared.

In the present work, friction stir welding experiments on AZ31 magnesium alloy sheets, characterized by a variable thickness along the welding line, were carried out. The approach adapted during welding consisted in maintaining constant the heat input to the joint. To this purpose, the rotational speed of the pin tool was increased with decreasing thickness and decreased with increasing thickness in order to obtain the same temperatures during welding. The amount by which the rotational speed was changed as a function of the sheet thickness was defined on the basis of the results given by FEM simulations of the FSW process. Finally, the effect of the in-process variation of the tool rotational speed on the mechanical and microstructural properties of FSWed joints was analysed by comparing both the nominal stress vs. nominal strain curves and microstructure of FSWed joints obtained in different process conditions. It was observed that FSW performed by keeping constant the heat input to the joint leads to almost coincident results both in terms of the curve shape, ultimate tensile strength and ultimate elongation values, and microstructure.

Friction Stir Extrusion (FSE) is a novel process designed to directly recycle machining chips. An experimental campaign was carried out on AZ31 milling chips using variations in extrusion ratio, force and tool rotation rate. The process mechanics were studied and correlated to the material flow, which was elucidated through use of a copper marker. A 3D, Lagrangian, thermo-mechanically coupled dedicated numerical model was set up and validated through temperature measurements. The combination of experimental and numerical results permitted to reconstruct the complex 3D material flow induced by tool rotation and plunge into the extrusion billet chamber.

In the paper solid state bonding conditions obtained in friction stir welding (FSW) of AA5754-H111 butt joints are analysed, considering the so called zigzag line in the transverse section of the joints. A wide experimental campaign was carried out varying both tool advancing speed and tool rotational one. The effects of the process on the mechanical properties of the joint were highlighted and micro- and macro-observations were used in order to explain the reasons of the enhanced mechanical properties found for the welded material. Numerical results derived from a FEM model previously developed by the authors were utilised to point out the different mechanical and metallurgical behavior of the obtained joints.

Linear Friction Welding (LFW) is a solid-state joining process applied to non-axisymmetric components. LFW involves joining of materials through the relative motion of two components undergoing an axial force. In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and eventually bonding conditions. In the paper the authors present a designed and assembled laboratory fixture for LFW operations and the results of an experimental and numerical campaign aimed to weld steel parts. The dedicated fixture permitted to highlight the effect of the most important process parameters. Process conditions allowing effective bonding conditions were highlighted and local conditions of pressure and temperature determining effective bonding of the specimens were determined.

One of the most relevant aspects of friction stir welding is the possibility to weld different materials. In the present paper, the authors present an improved continuum finite element model for the simulation of friction stir welding processes aimed to obtain T joints, made of a stringer in AA7175-T73511 and of a skin in AA2024-T4. The model, taking into account the thermomechanical behaviours of the two different materials, is utilised to study the occurring material flow and residual stress state. Numerical results are compared with experimental observations: the model is able to predict the material flow, obtaining important information on the joint failure mode.

FSW of titanium alloys is nowadays one of the most challenging welding operations, even with a solid state process, due to the thermo-mechanical and thermo-chemical characteristics of such materials. Due to the relevant application of titanium alloys in the aeronautic and aerospace industries, in the recent years few attempts were carried out to develop FSW processes aimed to maximize the mechanical performances of the welded parts. In the paper a new fixture is presented allowing obtaining effective FSW joints of titanium blanks, which were investigated through mechanical and metallurgical tests highlighting the peculiarities of FSW of titanium alloys.

Spot welding can be considered a very common joining technique in automotive and transportation industries as it permits to obtain effective lap-joints with short process times and what is more it is easily developed through robots and automated systems. Recently the Friction Stir Spot Welding (FSSW) process has been proposed as a natural evolution of the already known Friction Stir Welding (FSW) process, allowing to obtain sound spot joints that do not suffer from the insurgence of typical welding defects due to the fusion of the base material. In the paper, a modified Friction Stir Spot Welding (FSSW) process, with a spiral circular movement given to the tool after the sinking stage, is proposed. A continuum based numerical model for Friction Stir Spot Welding process is developed, that is 2D Lagrangian implicit, coupled, rigid-viscoplastic. This model is used to investigate the distribution of the main field variables, namely temperature, strain and strain rate, as well as the Zener-Hollomon parameter which, in turn, strongly affects the Continuous Dynamic Recrystallization (CDRX) process that takes place in the weld nugget. Numerical and experimental results are presented showing the effects of the process parameters on the joint performances and the mechanical effectiveness of the modified process.

In this paper, the authors present the results of a wide experimental campaign on aeronautical T-shaped parts of industrial interest characterized by dissimilar materials for the skin and stringer. The friction stir welding process engineering was developed with the aim to determine the specific process parameters determining the soundness on the obtained T-parts both from the metallurgical and mechanical point of view. Furthermore, the performance of the obtained T-joints was investigated.

Aluminum alloys are widely used in the aircraft industries even if such materials present lower ductility with respect to steels, anisotropy phenomena and, more important, they are often “difficult” to be welded or even “non-weldable”. In the last years the friction stir welding process (FSW) was proposed and applied in order to get good mechanical and technological performances of the joints. In this paper, an experimental and numerical investigation on the lap joining of AA2198-T4 aluminum alloy blanks by FSW is presented. In particular the joints strength and metallurgical properties are investigated by varying the joint configuration and the tool geometry and rotational speed. It is found that the use of cylindrical–conical pin tools and the correct choice of the relative sheet positioning increase the welded nugget extension and integrity improving the mechanical performances of the obtained joints.

Friction stir welding (FSW) is an energy efficient and environmentally "friendly" (no fumes, noise, or sparks) welding process, during which the workpieces are welded together in a solid-state joining process at a temperature below the melting point of the workpiece material under a combination of extruding and forging. Since its invention in 1991 by TWI, such process has been reaching a continuously increasing popularity among aerospace, automotive and shipbuilding industries due its capability to weld unweldable or difficult-to-weld light alloys in different joint morphologies. In this paper a wide experimental campaign is carried out in order to obtain T and lap joints characterized by dimensions of industrial interest from two sheets, the stringer and the skin, of different materials. In particular a peculiar clamping fixture has been designed in order to assure a perfect contact between the stringer and the skin and to develop the “transparency” welding; a proper welding tool has been utilized allowing to obtain at the same time a sound joint and the designed final component fillet radii. Finally T-pull tests together with macro and micro observations have been developed at the varying of the main process parameters.

Friction stir spot welding (FSSW) has been proposed as an effective technology to spot weld the so-called “difficult to be welded” metal alloys. In the paper, a variation of the FSSW process has been considered. A tool path is given after the sinking phase nearby the initial penetration site; in this way a larger welding spot is obtained and more material is involved in the bonding process. The process mechanics of such modified FSSW process is highlighted and the joint strength undergoing tensile tests is considered at the varying both of the assigned tool path and of a few process parameters. Macro- and micro-analyses are made in order to analyze the local material microstructure evolution. It is found that improved performances, with respect to the “traditional” FSSW process, are obtained for all the considered case studies.

A numerical and an experimental campaign were carried out with varying oscillation frequency and interface pressure. The local values of the main field variables at the contact interface between the specimens were predicted by a Lagrangian, implicit, thermo-mechanical FEM model and used as input of a dedicated Neural Network (NN). The NN, integrated in the FEM environment, was designed in order to calculate both a Boolean output, indicating the occurrence of welding, and a continuous output, indicating the quality of the obtained solid state weld. The analysis of the obtained results allowed three different levels of bonding quality, i.e., no weld, sound weld and excess of heat, to be correctly identified and predicted.

In the paper, a numerical and experimental study was carried out to highlight the effect of the distance d between the weld seam and the reinforcement on the residual stress distribution in Friction Stir Welded AA6082-T6 structures. An L-shaped profile was welded to a sheet metal with varying tool rotation and distance d from the weld seam. The Cut Compliance method was used to determine the resulting longitudinal residual stress. A dedicated FE model for FSW was set up, validated and utilized to predict the longitudinal residual stress in the assembled part. The analysis allowed the identification of a few design guidelines in order to reduce the detrimental effects of the residual stresses.

The results of an experimental and numerical analysis on Friction Stir Welding of dissimilar lap joints made out of AISI304 and Ti-6Al-4 V thin sheets are presented. The mixed joints, welded with varying process parameters, have been characterized from a mechanical and metallurgical point of view. A numerical model able to take into account the behaviour of the two different materials has been used. The numerical results have been utilized to explain the joint properties and the occurring material flow. The effect of the heat input, tilt angle and sheets mutual position has been investigated. It is found that both hooking defects and tunnels may occur with incorrect choice of process parameters. Good nugget integrity is obtained when the titanium sheet is used as upper sheet and high heat input is conferred to the joint. Finally, welding speed influences the nugget morphology as low values contribute to minimize the formation of the hooking defect.

In the paper the results of a wide range of experiments on friction stir welding (FSW) of aluminium alloys are reported. In particular, the AA6082-T6 butt joints fatigue resistance was investigated by varying the most relevant process parameters. In addition, a revolutionary pitch was utilized in order to investigate the effects of the tool rotating speed and the tool feed rate. Observations of the fracture insurgence were developed for different levels of applied load.

Although friction stir welding (FSW) has been successfully used to join materials that are difficult-to-weld or unweldeable by fusion welding methods, it is still in its early development stage and, therefore, a scientific knowledge based predictive model is of significant help for thorough understanding of FSW process. In this paper, a continuum based FEM model for friction stir welding process is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. This model is calibrated by comparing with experimental results of force and temperature distribution, then is used to investigate the distribution of temperature and strain in heat affect zone and the weld nugget. The model correctly predicts the non-symmetric nature of FSW process, and the relationships between the tool forces and the variation in the process parameters. It is found that the effective strain distribution is non-symmetric about the weld line while the temperature profile is almost symmetric in the weld zone.

Friction stir welding (FSW) is a solid state welding process used to weld difficult to be welded or unweldable materials as aluminium alloys. In the last years, other materials have been successfully tested as magnesium, titanium and nickel based alloys. Dissimilar joints can be obtained by FSW, but issues arise concerning the correct choice of the process parameters. In the paper, the results of an experimental and numerical campaign aimed to produce dissimilar AZ31-AA6016-T6 butt joints are presented. The effect of sheet mutual position and main process parameters was investigated. It was found that intermetallics are the main cause of the poor quality of the joints. Sound joints can be produced only if the magnesium alloy is in the advancing side.

New research trends for Friction Stir Welding include the use of highly resistant materials as steels and titanium alloys. In the paper a continuum based FEM model for Friction Stir Welding of lap joint made out of thin stainless steel sheets is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. The model, whose potential has been analyzed though temperature distribution comparisons, is able to predict temperature, strain and strain rate distributions, with varying process variables. In this way the FEM model can be applied for effective process and tool design.

Friction Stir Welding (FSW), as a solid state welding process, seems to be one of the most promising techniques for joining titanium alloys avoiding a large number of difficulties arising from the use of traditional fusion welding processes. In order to pursue cost savings and a time efficient design, the development of numerical simulations of the process can represent a valid choice for engineers. In the paper an artificial neural network was properly trained and linked to an existing 3D FEM model for the FSW of Ti–6Al–4V titanium alloy, with the aim to predict both the microhardness values and the microstructure of the welded butt joints at the varying of the main process parameters. A good agreement was found between experimental values and calculated results.

The prediction of residual stresses is a relevant and, under many points of view, still open issue for a proper welding process design. In the present paper a 3D FE model, with general validity for different joint configurations, was used to simulate the Friction Stir Welding (FSW) process of butt joints through a single block approach. The model is able to predict the residual stresses by considering thermal actions only, thanks to a new time efficient approach. A good agreement between calculated and experimentally measured data was found; the effectiveness of the presented numerical procedure was evaluated by comparing the calculation times of the proposed method with the ones of already known FE approaches.

Friction stir welding (FSW) is an energy efficient and environmentally "friendly" (no fumes, noise, or sparks) welding process, during which the sheets are welded together in a solid-state joining process. FSW is mature for simple configurations but a significant lack of knowledge is found when dealing with different designs such as T-sections, corner welds and box sections. The present work explores the feasibility of producing corner fillet geometries using FSW. Although such a kind of geometry has traditionally been considered unfeasible for the process, it seems to have a great potential to be used for T-joint configurations, a recurrent design pattern in transport applications. A specific tool has been developed and a set of welds has been produced with it. The process has been analysed by both micro and macro observations and a dedicated numerical model tuned by comparison of the thermal histories experimentally measured by embedded thermocouples. According to the obtained results, the proposed model is able to represent a useful design tool for the process. Main problem pending to be solved is how to avoid the formation of a tunnel defect in the weld centre line due to a suck effect of the tool on the stirred material.

This paper presents the results of a combined experimental and numerical investigation focused on the effects of an in process water cooling treatment aimed at improving the final quality of friction stir welded butt joints in terms of mechanical resistance and metallurgy of the processed material. Micro and macro observations, together with the evolution of an already developed finite element tool, have been used to analyze specimens obtained under different process conditions. Water cooling was found to enhance joint strength, reducing the material softening usually observed in the thermo-mechanically affected zone area, with no detrimental effect on nugget integrity.

Friction stir welding (FSW) now definitively reached a large interest in the scientific community and what is more in the industrial environment, due to the advantages of such solid state welding process with respect to the classic ones. The latter aspects are relevant also with reference to joints characterized by a complex geometry. What is more, advanced FEM tools permit to develop effective engineering of the processes; quantitative results can be acquired from numerical simulations once basic information, as the process mechanics and the material flow, are certain. Material flow plays a fundamental role in FSW since it determines the effectiveness of the joints or, in turn, the insurgence of defects. In the paper, the material flow in the FSW of aluminum alloys T-joints is investigated at the varying of the most relevant technological and geometrical parameters with numerical simulations and experiments. In particular, to investigate the metal flow, a wide campaign of experimental tests and observations was developed utilizing a thin foil of brass as marker, placed at the interface of the two blanks to be welded. Some relevant conclusions on the process mechanics and on the actual material flow determining the material bonding are outlined, permitting an insight of the FSW of T-joints.

Friction stir welding (FSW) has been reaching a continuously increasing popularity among joining processes since its invention in 1991. Although mainly used for aluminium alloys, it has been successfully applied also to steels. In the present paper, a continuum based FEM model for FSW of steels is proposed, which is three-dimensional Lagrangian implicit, coupled, rigid viscoplastic. The model, whose potential has been analysed through temperature distribution comparisons, is able to predict temperature, strain and strain rate distributions, together with thermal and mechanical loads on the welding tool, at varying main process variables. In this way, the FEM model can be used for process and tool design.