Search

This study is focused on a comparison of experimental neutron flux data from the VR-1 reactor with results from Serpent calculation. Serpent data were calculated by the dynamic part of the code and the steady-state criticality calculation. The Serpent calculation was performed with the JEFF 3.3 and ENDF/B-VIII.0 nuclear data library. This paper expands previous work and focuses on the integral control rod worth. Comparison of the ENDF/B-VIII.0 and JEFF 3.3 nuclear data libraries with experimental data is especially valuable. The comparison shows better performance of JEFF 3.3 nuclear data instead of ENDF/B-VIII.0 for the transient calculation of the cases presented in this article. In addition, the comparison of static and dynamic reactivity provided an interesting difference, especially for small rod insertion. Moreover, the study confirms that the Serpent dynamic external source simulation mode provides an accurate description of reactor behavior, and that the shape of the integral control rod worth is close to one experimentally measured. • Control rod drop experiment was performer at VR-1 reactor. • Results from experiment were compared with Serpent dynamic calculation. • Diff. nuclear data libraries were used to study difference in delayed neutron data. • JEFF 3.3 nuclear data library provides better description compared to ENDF/B-VIII.0. [ABSTRACT FROM AUTHOR]

• CASL VERA represents a new tool for fuel loading pattern optimization for SMR simulations. • The single fuel assembly calculations provided by the CASL VERA are in a good agreement against the Polaris or Serpent calculation. • The 3D full core calculations with water reflector are in a good agreement against Serpent calculation code. • The 3D full core calculations with stainless steel reflector are in a worse agreement with Serpent calculation code. The optimal stainless steel fraction to het reasonably good results against the Serpent code, was set up to 90%. • Stainless steel reflector extends core operation, moreover it balances the power generation in the SMR NuScale core. Three-dimensional (3D) full-core calculations are an integral part of fuel reload design for today's light water reactors (LWRs). The current approaches are typically based on the nodal diffusion codes that calculate criticality state points and power distributions as a function of burnup. The CASL VERA (Consortium for Advanced Simulation of Light Water Reactors, Virtual Environment for Reactor Applications) code represents one of the latest advancements in 3D full-core calculation analysis based on transport theory methods employing the Method of Characteristics (MOC) and coupled multi-physics. In this article, a publicly released version of the NuScale reactor core is analysed with the VERA code (version 3.9 and 4.1) and contrasted against some static Serpent and Polaris based simulations. The analysis shows an excellent agreement for the lattice-level calculations as well as with some of the 3D full-core models. However, larger deviations were found in cases with heavy reflector models, whereby the reflector composition was found to impact the differences between the VERA and Serpent results. In this analysis, it was determined that greater than 90% stainless steel content in the heavy reflector leads to higher deviations between the VERA results and the Serpent results. The burnup calculations showed that the presence of the heavy reflector extends the cycle length and also leads to a flatter power distribution in the core, which can generally be interpreted as more efficient. [ABSTRACT FROM AUTHOR]

This paper presents results obtained by reproducing a VVER-1000 lattice physics benchmark using the Serpent2 code. The benchmark data are related to the initial cycles of the Khmelnitskiy nuclear power plant. This study compares results obtained with the Serpent2 code against those calculations published in the benchmark document. Detailed descriptions are provided for two fuel assemblies; one without gadolinium in the fuel pins, and the other with gadolinium. A sensitivity study is performed utilizing different nuclear data libraries, different depletion sequences (including pin by pin burnup) and different number of radial regions within the fuel pins containing gadolinium. The infinite multiplication factor behavior and isotopic concentrations of major isotopes are compared and discussed. It is concluded that Serpent2 provided reasonable results in comparison with the other codes used in the benchmark. [ABSTRACT FROM AUTHOR]

• Benchmark study of a VVER 1000 core simulation of hot zero power (HZP) tests. • The Serpent-NESTLE combination is capable of providing high quality simulations. • The Serpent-NESTLE combination and MCNP, both, provided reasonable results. This article presents a benchmark study of a VVER 1000 core simulation of hot zero power (HZP) tests. Measured experimental data from the Temelin Unit 2 nuclear power plant's operation test during its first reactor startup were compared using MCNP as well as the combination of Serpent + NESTLE lattice-to-diffusion nodal simulation. Results from full-core 3D models included multiplication factor and moderator temperature coefficients (MTC) that were compared to experimental data, which revealed a very good agreement with criticality states during HZP tests, and a reasonable agreement for MTC. Therefore, it is concluded that the Serpent-NESTLE combination and MCNP, both, provided reasonable results for this benchmark. The Serpent-NESTLE code combination was used for the first time in this study and has shown to be capable of providing high quality simulations in an efficient fashion. To encourage future benchmarks by other researchers, this article makes a special effort to document the core design information and details that would facilitate such efforts. [ABSTRACT FROM AUTHOR]