Search

Polymer semiconductors are promising candidates for wearable and skin-like X-ray detectors due to their scalable manufacturing, adjustable molecular structures and intrinsic flexibility. Herein, we fabricated an intrinsically stretchable n-type polymer semiconductor through spatial nanoconfinement effect for ultrasensitive X-ray detectors. The design of high-orientation nanofiber structures and dense interpenetrating polymer networks enhanced the electron-transporting efficiency and stability of the polymer semiconductors. The resultant polymer semiconductors exhibited an ultrahigh sensitivity of 1.52 × 10 4 μC Gy air -1 cm -2 , an ultralow detection limit of 37.7 nGy air s -1 (comparable to the record-low value of perovskite single crystals), and polymer film X-ray imaging was achieved at a low dose rate of 3.65 μGy air s -1 (about 1/12 dose rate of the commercial medical chest X-ray diagnosis). Meanwhile, the hybrid semiconductor films could sustain 100% biaxial stretching strain with minimal degeneracy in photoelectrical performances. These results provide insights into future high-performance, low-cost e-skin photoelectronic detectors and imaging., (© 2022. The Author(s).)

Long distance spin transport and photoresponse are demonstrated in a single F16 CuPc spin valve. By introducing a low-temperature strategy for controlling the morphology of the organic layer during the fabrication of a molecular spin valve, a large spin-diffusion length up to 180 nm is achieved at room temperature. Magnetoresistive and photoresponsive signals are simultaneously observed even in an air atmosphere., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Microelectronic circuits/arrays produced via high-speed printing instead of traditional photolithographic processes offer an appealing approach to creating the long-sought after, low-cost, large-area flexible electronics. Foremost among critical enablers to propel this paradigm shift in manufacturing is a stable, solution-processable, high-performance semiconductor for printing functionally capable thin-film transistors - fundamental building blocks of microelectronics. We report herein the processing and optimisation of solution-processable polymer semiconductors for thin-film transistors, demonstrating very high field-effect mobility, high on/off ratio, and excellent shelf-life and operating stabilities under ambient conditions. Exceptionally high-gain inverters and functional ring oscillator devices on flexible substrates have been demonstrated. This optimised polymer semiconductor represents a significant progress in semiconductor development, dispelling prevalent skepticism surrounding practical usability of organic semiconductors for high-performance microelectronic devices, opening up application opportunities hitherto functionally or economically inaccessible with silicon technologies, and providing an excellent structural framework for fundamental studies of charge transport in organic systems.

This article discusses the recent progress in the development of high-mobility polymer semiconductors with various functionalities. These semiconductors have advantages such as easy solution processing, large-area manufacturing, mechanical strength, and flexibility. The article focuses on the integration of high mobility with stretchability, strong luminescence, photolithography patterning, and efficient thermoelectric conversion. The challenges and future directions in this field are also discussed. The research is supported by various funding sources. [Extracted from the article]

Intrinsically stretchable light‐emitting polymer semiconductors are essential building blocks for bioelectronics and display textiles. Stretchability is challenging for rigid conjugated polymers unless sacrificing charge mobility by introducing amorphous domains. High‐performance light‐emitting properties designed with twisted angle are undesirable for conductive materials. Hence, the concurrent strategies hardly satisfy the balance of stretchability, light‐emitting and mobility. Herein, a morphology engineering is proposed by controlling micro‐crystalline and limiting aggregation, that four intrinsically stretchable emissive polymers with good charge mobility based on indacenodithiophene (IDT) are obtained. Polymers reveal good emission properties with high photoluminescence quantum yields (PLQY) of about 20%, while stretchable modulus and charge mobility are tunable by backbone and weight. Specifically emphasizing, IDT‐2T‐H retains high performance of charge mobility and PLQY even at 100% strain. Therefore, organic light emitting diodes are fabricated based on it and showing the luminance of 176.2 cd cm−2, which verifies the potential of technique to reconcile integration of stretchability, light‐emitting, and mobility. This is the first attempt to integrate balanced mechanical, optical, and electrical properties through micro‐crystalline aggregation‐limited morphology in one polymer, offering a feasible approach to advanced integrated circuit and multi‐functional electronics in the future. [ABSTRACT FROM AUTHOR]

The development of polymer semiconductors with strong luminescence and high mobility has always been challenging, and achieving both properties together is considered paradoxical according to molecular design principles. Studies on novel molecular species with unique optoelectrical characteristics are limited. Herein, a novel fully rigid coplanar thiophene‐pyridal[1,2,3]triazole‐thiophene (T‐PT‐T) class structure with considerable intramolecular noncovalent interactions is proposed. To balance luminescence and carrier transport properties, a series of non‐conventional regioregular conjugated polymers (PPTs) with suitable energy gaps (Egs ≈ 1.8 eV) are developed, which exhibit near‐infrared (NIR, 700–1000 nm) light emission and high mobility. One of the synthesized polymers, PPT‐2, exhibits an excellent photoluminescence quantum yield (PLQY) of 9% in the solid‐state and a high mobility reaching 0.35 cm2 V−1 s−1, indicating superior performance compared to other NIR light‐emitting polymer semiconductors. The authors believe that the class structure of fully rigid coplanar "T‐PT‐T" could be harnessed to develop high‐mobility NIR light‐emitting polymer semiconductors. [ABSTRACT FROM AUTHOR]

Large area and highly aligned polymer semiconductor sub-microwires were fabricated using the coaxial focused electrohydrodynamic jet printing technology. As indicated by the results, the sub-microwire arrays have smooth morphology, well reproducibility and controllable with a width of ~110 nm. Analysis shows that the molecular chains inside the sub-microwires mainly exhibited edge-on arrangement and the π-stacking direction (010) of the majority of crystals is parallel to the long axis of the sub-microwires. Sub-microwires based organic field effect transistors showed high mobility with an average of 1.9 cm2 V−1 s−1, approximately 5 times higher than that of thin film based organic field effect transistors. In addition, the number of sub-microwires can be conveniently controlled by the printing technique, which can subsequently concisely control the performance of organic field effect transistors. This work demonstrates that sub-microwires fabricated by the coaxial focused electrohydrodynamic jet printing technology create an alternative path for the applications of high-performance organic flexible device. Here, the authors fabricate large area and highly aligned polymer semiconductor sub-microwires arrays via coaxial focused electrohydrodynamic jet printing technology, achieving high on/off ratio and average mobility that is 5x higher than that of thin film based organic field effect transistors. [ABSTRACT FROM AUTHOR]

Ambipolar polymer semiconductors are potentially serviceable for logic circuits, light-emitting field-effect transistors (LFETs) and polymer solar cells (PSCs). Although several high-performance ambipolar polymers have been developed, their optoelectronic devices are generally processed from toxic chlorinated solvents. To achieve the commercial applications of organic FETs (OFETs), the polymers should be processed from nonchlorinated solvents, instead of chlorinated solvents. However, most conjugated polymers show poor solubility in nonchlorinated solvents. It is of great importance to develop ambipolar polymers that can be processed from nonchlorinated solvents. Here, we develop a nonchlorinated solvent processed polymer named poly[7-fluoro-N, N′-di(4-decyltetradecyl)-7′-azaisoindigo-6′,6″-(thieno[3,2-b]thiophene-2,5-diyl)-7‴-fluoro-N″, N‴-di(4-decyltetradecyl)-7″-azaisoindigo-6,6‴-([2,2″-bithiophene]-5,5″-diyl)] (PITTI-BT) by designing a monomer with a large molar mass. The polymer displays good solubility in p-xylene (PX). Well-aligned films of PITTI-BT are achieved by an off-center spin-coating (SC) method. Based on the high-quality films, the OFETs fabricated from PX solution achieve record ambipolar performance with hole and electron mobilities of 3.06 and 2.81 cm2 V−1 s−1, respectively. The combination of nonchlorinated solvents and good alignment process offers an effective and eco-friendly approach to obtain high-performance ambipolar transistors. [ABSTRACT FROM AUTHOR]

Abstract Organic field-effect transistors (OFETs) have received significant interest due to potential applications from low-cost active circuit to wearable health care devices. Organic semiconductors as one of the key components in OFETs have drawn great attentions during last decades. Among them, antiaromatic and quinoidal materials have become the most intensively studied semiconductors. Therefore, this review describes the chemical structures and efficiency characteristics of π-conjugated materials through antiaromaticity and quinoid strategy for OFETs. In addition, rational designs and synthetic methods for these materials will be summarized, and a practical guideline for accelerating the development of high-performance semiconducting materials and devices will be provided. [ABSTRACT FROM AUTHOR]

Polymer field-effect transistors (PFETs) are promising candidates for future electronics due to easy and inexpensive fabrication. Poly{[ N , N ′-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene) [P(NDI2OD-T2)] based PFET devices with poly (methyl 2-methylpropenoate) (PMMA) as dielectric were fabricated successfully and it was found that the charge transporting behaviors were greatly impacted by the molecular weight of PMMA. Both hole and electron mobilities were improved simultaneously with increasing molecular weight of PMMA. In addition, similar result was also obtained in the PFETs based on a semiconductor, poly{[ N , N ′-bis(2-octyldodecyl)-1,4,5,8-naphthalenediimide-2,6-diyl-alt-5,5′-di(thiophen-2-yl)-2,2′-(E)-2-(2-(thiophen-2-yl)vinyl)thiophene]}. Furthermore, the corresponding complementary-like inverters with PMMA displayed a gain value of 100. We studied the interface between the semiconducting and dielectric layers and found that the low trap density with higher-molecular-weight PMMA attributes to high mobilities of electrons and holes. This work provides a new way to fabricate high-performance PFETs and to improve performance of the complementary circuits through studying the effects of polymeric gate dielectrics, compared to the conventional view of semiconducting materials. [ABSTRACT FROM AUTHOR]

The authors reported organic phototransistors (PTs) with octadecyltrichlorosilane treated SiO2/Si substrate based on anthra[2,3-b]benzo[d]thiophene. The organic PTs show a high mobility of 0.4 cm2 V-1 s-1, a maximum photoresponsivity of about 1000 A/W, and photocurrent/dark-current ratio of around 800 under white light irradiation with 30 μW/cm2. The data are comparable with those of PTs based on amorphous silicon. Meanwhile, it is interesting to see that the devices show a high air-stable property and high photosensitivity via electric-field enhanced process. All these phenomena were attributed to the intrinsic optic-electronic property of the organic semiconductor and optic-electric field effect. [ABSTRACT FROM AUTHOR]

For donor–acceptor conjugated polymers, it is an effective strategy to improve their electron mobilities by introducing electron‐withdrawing groups (EWGs, such as F, Cl, or CF3) into the polymer backbone. However, the introduction of different EWGs always requires a different synthetic approach, leading to additional arduous work. Here, an effective two‐step method is developed to obtain EWG substituted bay‐annulated indigo (BAI) units. This method is effective to introduce various EWGs (F, Cl, or CF3) into BAI at different substituted positions. Based on this method, EWG substituted BAI acceptors, including 2FBAI, 2ClBAI, and 2CF3BAI, are reported for the first time. Furthermore, four polymers of PBAI‐V, P2FBAI‐V, P2ClBAI‐V, and P4OBAI‐V are developed. All the polymers show ambipolar transport properties. Particularly, P2ClBAI‐V exhibits remarkable hole and electron mobilities of 4.04 and 1.46 cm2 V−1 s−1, respectively. These mobilities are among the highest values for BAI‐based polymers. Here, an effective two‐step method is developed to obtain an electron‐withdrawing group (EWG) substituted bay‐annulated indigo (BAI) units. Four polymers, PBAI‐V, P2FBAI‐V, P2ClBAI‐V, and P4OBAI‐V, are developed by this method. Particularly, P2ClBAI‐V exhibits remarkable hole and electron mobilities of 4.04 and 1.46 cm2 V−1 s−1, respectively. These mobilities are among the highest values for BAI‐based polymers. [ABSTRACT FROM AUTHOR]

Two structural isomers of six-fused-ring sulfur-containing molecules were synthesized as active materials for p-type organic field-effect transistors, and their optical and electrochemical properties were characterized. Field-effect transistors based on these compounds were fabricated to investigate the relationships between structures and semiconductor properties. [ABSTRACT FROM AUTHOR]