Search

At the Blanco transform fault system (BTFS) off Oregon, 138 local earthquakes and 84 double‐couple focal mechanisms from ocean‐bottom‐seismometer recordings jointly discussed with bathymetric features reveal a highly segmented transform system without any prominent fracture zone traces longer than 100 km. In the west, seismicity is focused at deep troughs (i.e., the West and East Blanco, and Surveyor Depressions). In the east, the BTFS lacks a characteristic transform valley and instead developed the Blanco Ridge, which is the most seismically active feature, showing strike‐slip and dip‐slip faulting. Sandwiched between the two main segments of the BTFS is the Cascadia Depression, representing a short intra‐transform spreading segment. Seismic slip vectors reveal that stresses at the eastern BTFS are roughly in line with plate motion. In contrast, stresses to the west are clockwise skewed, indicating ongoing reorganization of the OTF system. As we observed no prominent fracture zones at the BTFS, plate tectonic reconstructions suggest that the BTFS developed from non‐transform offsets rather than pre‐existing transform faults during a series of ridge propagation events. Our observations suggest that the BTFS can be divided into two oceanic transform systems. The eastern BTFS is suggested to be a mature transform plate boundary since ∼0.6 Ma. In contrast, the western BTFS is an immature transform system, which is still evolving to accommodate far‐field stress change. The BTFS acts as a natural laboratory to yield processes governing the development of oceanic transform faults. Plain Language Summary: The Blanco transform fault system (BTFS) northwest off the coast of Oregon is seismically very active. We used 1 year of ocean bottom seismometer data collected between September 2012 and October 2013 to locate 138 local earthquakes. The events align perfectly with the morphologic features of the BTFS, dividing the BTFS into five transform segments and two short intra‐transform spreading centers. Furthermore, we observe different seismotectonic behaviors of the western and eastern BTFS based on the along‐strike variation in morphology, magnetization, focal depth distribution, and strain partitioning. Although many segmented oceanic transform systems were formed from a single transform fault in response to rotations in plate motion, the BTFS turns out to be originated from non‐transform offsets between ridge segments, as we observed no prominent fracture zone traces neither in morphology nor gravity field data. A clockwise shift in the Juan de Fuca/Pacific pole of rotation at ∼5 Ma followed by a series of ridge propagation events initiated the formation of the BTFS, integrated each segment of the BTFS by shortening the ridge segments in between. Our observations suggest that the Blanco Ridge and the Gorda transform segment in the eastern BTFS were formed at ∼1.6 and 0.6 Ma, respectively, and ever since, the eastern BTFS became a mature transform boundary. In contrast, seismic slip vectors comparing to plate motion directions reveal that stresses in the western BTFS are systematically skewed, suggesting the immature transform plate boundary is still adjusting to the new stress regime. Key Points: Local seismicity of the Blanco transform fault system (BTFS) reveals along‐strike variations dominated by strike‐slip and oblique dip‐slipThe BTFS developed from non‐transform offsets rather than discrete transform faults in response to plate rotation and ridge propagationThe BTFS consists of a mature plate boundary in the east and an immature system in the west, separated by a central spreading center [ABSTRACT FROM AUTHOR]

The Liguro-Provençal basin was formed as a back-arc basin of the retreating Calabrian–Apennines subduction zone during the Oligocene and Miocene. The resulting rotation of the Corsica–Sardinia block is associated with rifting, shaping the Ligurian Basin. It is still debated whether oceanic or atypical oceanic crust was formed or if the crust is continental and experienced extreme thinning during the opening of the basin. We perform ambient noise tomography, also taking into account teleseismic events, using an amphibious network of seismic stations, including 22 broadband ocean bottom seismometers (OBSs), to investigate the lithospheric structure of the Ligurian Basin. The instruments were installed in the Ligurian Basin for 8 months between June 2017 and February 2018 as part of the AlpArray seismic network. Because of additional noise sources in the ocean, OBS data are rarely used for ambient noise studies. However, we carefully pre-process the data, including corrections for instrument tilt and seafloor compliance and excluding higher modes of the ambient-noise Rayleigh waves. We calculate daily cross-correlation functions for the AlpArray OBS array and surrounding land stations. We also correlate short time windows that include teleseismic earthquakes, allowing us to derive surface wave group velocities for longer periods than using ambient noise only. We obtain group velocity maps by inverting Green's functions derived from the cross-correlation of ambient noise and teleseismic events, respectively. We then used the resulting 3D group velocity information to calculate 1D depth inversions for S-wave velocities. The group velocity and shear-wave velocity results compare well to existing large-scale studies that partly include the study area. In onshore France, we observe a high-velocity area beneath the Argentera Massif, roughly 10 km below sea level. We interpret this as the root of the Argentera Massif. Our results add spatial resolution to known seismic velocities in the Ligurian Basin, thereby augmenting existing seismic profiles. In agreement with existing seismic studies, our shear-wave velocity maps indicate a deepening of the Moho from 12 km at the south-western basin centre to 20–25 km at the Ligurian coast in the north-east and over 30 km at the Provençal coast. The maps also indicate that the south-western and north-eastern Ligurian Basin are structurally separate. The lack of high crustal vP/vS ratios beneath the south-western part of the Ligurian Basin preclude mantle serpentinisation there. [ABSTRACT FROM AUTHOR]

The northern margin of the Ligurian Basin shows notable seismicity at the Alpine front, including frequent magnitude 4 events. Seismicity decreases offshore towards the Basin centre and Corsica, revealing a diffuse distribution of low-magnitude earthquakes. We analyse data of the amphibious AlpArray seismic network with focus on the offshore component, the AlpArray ocean bottom seismometer (OBS) network, consisting of 24 broadband OBSs deployed for 8 months, to reveal the seismicity and depth distribution of micro-earthquakes beneath the Ligurian Sea. Two clusters occurred between ∼ 10 km to ∼ 16 km depth below the sea surface, within the lower crust and uppermost mantle. Thrust faulting focal mechanisms indicate compression and an inversion of the Ligurian Basin, which is an abandoned Oligocene–Miocene rift basin. The basin inversion is suggested to be related to the Africa–Europe plate convergence. The locations and focal mechanisms of seismicity suggest reactivation of pre-existing rift-related structures. Slightly different striking directions of presumed rift-related faults in the basin centre compared to faults further east and hence away from the rift basin may reflect the counter-clockwise rotation of the Corsica–Sardinia block. High mantle S-wave velocities and a low Vp/Vs ratio support the hypothesis of strengthening of crust and uppermost mantle during the Oligocene–Miocene rifting-related extension and thinning of continental crust. [ABSTRACT FROM AUTHOR]

The aftershock distribution of the 2014 Mw 8.1 Iquique earthquake offshore northern Chile, identified from a long‐term deployment of ocean bottom seismometers installed eight months after the mainshock, in conjunction with seismic reflection imaging, provides insights into the processes regulating the updip limit of coseismic rupture propagation. Aftershocks updip of the mainshock hypocenter frequently occur in the upper plate and are associated with normal faults identified from seismic reflection data. We propose that aftershock seismicity near the plate boundary documents subduction erosion that removes mass from the base of the wedge and results in normal faulting in the upper plate. The combination of very little or no sediment accretion and subduction erosion over millions of years has resulted in a very weak and aseismic frontal wedge. Our observations thus link the shallow subduction zone seismicity to subduction erosion processes that control the evolution of the overriding plate. Plain Language Summary: To better understand the controls on shallow seismicity and subduction erosion following large subduction earthquakes, we use marine recordings of the Mw 8.1 2014 Iquique earthquake aftershocks and long‐offset multi‐channel seismic data. By comparing the aftershock locations and seismic imaging, we observe that most aftershocks occurred in the upper continental plate and abruptly stopped in the frontal forearc. The amplitude characteristics of upper‐crust reflections indicate a fractured and fluid‐filled outer forearc, which is associated with the absence of aftershocks. Large‐scale faulting, as evidenced by disrupted reflections in the seismic image, can be correlated to upper plate seismicity. We propose that the aftershocks updip of the main earthquake area reflect active subduction erosion processes. Key Points: We investigate structure and seismicity at the updip end of the 2014 Iquique earthquake rupture using amphibious seismic dataSeismicity updip of the 2014 Iquique earthquake occurs over a broad range likely interpreted to be related to the basal erosion processesCoseismic stress changes and aftershocks activate extensional faulting of the upper plate and subduction erosion [ABSTRACT FROM AUTHOR]

The Liguro-Provençal basin was formed as a back-arc basin of the retreating Calabrian-Apennines subduction zone during the Oligocene and Miocene. The resulting rotation of the Corsica-Sardinia block is associated with rifting, shaping the Ligurian Sea. It is still debated whether oceanic or atypical oceanic crust was formed or if the crust is continental and experienced extreme thinning during the opening of the basin. We invert velocity models using an amphibious network of seismic stations, including 22 broadband Ocean Bottom Seismometers (OBS) to investigate the lithospheric structure of the Ligurian sea. The instruments were installed in the Ligurian Sea for eight months between June 2017 and February 2018 as part of the AlpArray seismic network. Because of additional noise sources in the ocean, OBS data are rarely used for ambient noise studies. However, we attentively pre-process the data, including corrections for instrument tilt and seafloor compliance. We took extra care to exclude higher modes of the ambient-noise Rayleigh waves. We calculate daily cross-correlation functions for the LOBSTER array and surrounding land stations. Additionally, we correlate short time windows that include teleseismic earthquakes that allow us to derive surface wave group velocities for longer periods than using ambient noise only. Group velocity maps are obtained by inverting Green's functions derived from the cross-correlation of ambient noise and teleseismic events, respectively. We then used the resulting 3D group velocity information to calculate 1D depth inversions for S-wave velocities. The shear-wave velocity results show a deepening of the Moho from 12 km at the southwestern basin centre to 20-25 km at the Ligurian coast in the northeast and over 30 km at the Provençal coast. We find no hint on mantle serpentinisation and no evidence for an Alpine slab, at least down to depths of 25 km. However, we see a separation of the southwestern and northeastern Ligurian Basin that coincides with the promoted prolongation of the Alpine front. [ABSTRACT FROM AUTHOR]

The northern margin of the Ligurian Basin shows notable seismicity at the Alpine front, including frequent magnitude 4 events. Seismicity decreases offshore towards the Basin centre and Corsica, revealing a diffuse distribution of low magnitude earthquakes. We analyse data of the amphibious AlpArray seismic network with focus on the offshore component, the AlpArray OBS network, consisting of 24 broadband ocean bottom seismometers deployed for eight months, to reveal the seismicity and depth distribution of micro-earthquakes beneath the Ligurian Sea. Two clusters occurred between ~10 km to ~16 km depth below sea surface, within the lower crust and uppermost mantle. Thrust faulting focal mechanisms indicate compression and an inversion of the Ligurian Basin, which is an abandoned Oligocene rift basin. The Basin inversion is suggested to be related to the Africa-Europe plate convergence. The locations and focal mechanisms of seismicity suggest reactivation of pre-existing rift structures. Slightly different striking directions of faults in the basin centre compared to faults further east and hence away from the abandoned rift may mimic the counter-clockwise rotation of the Corsica-Sardinia block during ~20-16 Ma. The observed cluster events support the hypothesis of strengthening of crust and uppermost mantle during rifting related extension and thinning of continental crust. [ABSTRACT FROM AUTHOR]

The Sumatran subduction zone exhibits strong seismic and tsunamogenic potential with the prominent examples of the 2004, 2005 and 2007 earthquakes. Here, we invert travel-time data of local earthquakes for vp and vp=vs velocity models of the central Sumatran forearc. Data were acquired by an amphibious seismometer network consisting of 52 land stations and 10 ocean-bottom seismometers located on a segment of the Sumatran subduction zone that had not ruptured in a great earthquake since 1797 but witnessed recent ruptures to the north in 2005 (Nias earthquake, Mw D 8:7) and to the south in 2007 (Bengkulu earthquake, Mw D 8:5). The 2-D and 3-D vp velocity anomalies reveal the downgoing slab and the sedimentary basins. Although the seismicity pattern in the study area appears to be strongly influenced by the obliquely subducting Investigator Fracture Zone to at least 200 km depth, the 3-D velocity model shows prevailing trench-parallel structures at depths of the plate interface. The tomographic model suggests a thinned crust below the basin east of the forearc islands (Nias, Pulau Batu, Siberut) at ~180 km distance to the trench. vp velocities beneath the magmatic arc and the Sumatran fault zone (SFZ) are around 5 km s-1 at 10 km depth and the vp=vs ratios in the uppermost 10 km are low, indicating the presence of felsic lithologies typical for continental crust. We find moderately elevated vp=vs values of 1.85 at ~150 km distance to the trench in the region of the Mentawai Fault. vp=vs ratios suggest an absence of large-scale alteration of the mantle wedge and might explain why the seismogenic plate interface (observed as a locked zone from geodetic data) extends below the continental forearc Moho in Sumatra. Reduced vp velocities beneath the forearc basin covering the region between the Mentawai Islands and the Sumatra mainland possibly reflect a reduced thickness of the overriding crust. [ABSTRACT FROM AUTHOR]

Abstract: The Sumatran margin suffered three great earthquakes in recent years (Aceh-Andaman 26 December 2004 Mw=9.1, Nias 28 March 2005 Mw=8.7, Bengkulu 12 September 2007 Mw=8.5). Here we present local earthquake data from a dense, amphibious local seismic network covering a segment of the Sumatran margin that last ruptured in 1797. The occurrence of forearc islands along this part of the Sumatran margin allows the deployment of seismic land-stations above the shallow part of the thrust fault. In combination with ocean bottom seismometers this station geometry provides high quality hypocentre location for the updip end of the seismogenic zone in an area where geodetic data are also available. In this region, the Investigator Fracture Zone (IFZ), which consists of 4 sub-ridges, is subducted below the Sunda plate. This topography appears to influence seismicity at all depth intervals. A well-defined linear streak of seismicity extending from 80 to 200 km depth lies along the prolongation of closely spaced IFZ sub-ridges. More intermediate depth seismicity is located to the southeast of this string of seismicity and is related to subducted rough oceanic seafloor. The plate interface beneath Siberut Island which ruptured last in 1797 is characterised by almost complete absence of seismicity. [ABSTRACT FROM AUTHOR]

On April 2014 the Iquique Mw 8.1 earthquake ruptured the interpolate contact between the oceanic Nazca and continental South American plates offshore northern Chile between 19.5°S to 21°S in April 2014. This earthquake did not fully release the strain accumulated since the last great megathrust (Mw 8.8) in 1877 and had left an unbroken segment in the south. From December 2014 to November 2016, we deployed an offshore network of 15 Ocean Bottom Seismometers (OBS) that covered the rupture area and the unbroken southern segment using the Chilean Navy ship OPV Toro and R/V Sonne. That data set is supplemented by five weeks of data from 67 OBS installed for a controlled source seismic experiment during cruise MGL1610 of the R/V Marcus Langseth in late 2016. Data acquired onshore by stations from of the IPOC (Integrated Plate Boundary Observatory Chile) and CSN (Chilean Seismological Service) networks are also included.We present first results of this ongoing project, which include double-difference hypocenter relocations based on waveform cross-correlation. Most of the seismicity occurs between 19.5 and 21°S up-dip of the patch of maximum coseismic slip during the 2014 earthquake, while the seismicity in seismogenic depths is highly concentrated forming well-defined clusters. The observed seismicity provides constraints on the structure of the marine forearc and enables us to relate the seismicity distribution to the background seismicity, seafloor morphology, and regional tectonics. [ABSTRACT FROM AUTHOR]