Search

In this article we present a novel method for the estimation of sulphur deposit resources based on high-resolution shallow reflection seismic survey and well logging. The study area was sited in the northern part of the Carpathian Foredeep (SE Poland), where sulphur ore occurs in carbonate rocks at a depth of about 120 m, with a thickness of approximately 25 m. The results of many years of seismic monitoring performed in the area of the sulphur deposit allowed us to determine the quantitative relationships between the amplitude of the seismic signal reflected from the top of the deposit and its petrophysical parameters such as porosity and sulphur content. The method of evaluating sulphur deposit is based on extensive statistics concerning the reservoir properties obtained from borehole data. We also discuss a methodology for conducting field acquisition and processing of seismic data in the aspect of mapping the actual amplitudes of the signal reflected from the top of a deposit. The results of estimating the abundance of carbonate sulphur deposits are presented based on the example of a seismic cross-section from the Osiek sulphur mine. Obtained results allow indicating the most prospective zones suitable for exploitation. [ABSTRACT FROM AUTHOR]

In this article, we present a high-resolution shallow seismic surveying method for imaging the inner structure of the Miocene evaporitic formation, where sulfur ore occurs. The survey was completed in the northern part of the Carpathian Foredeep (SE Poland) where sulfur deposits occur up to a depth of ca. 260 m. In this region, the sulfur ore is strata-bound and exists within a carbonate interval of a thickness of approximately 28 m. The average sulfur content reaches up to 30%. Five seismic profiles were acquired with a total length of 2450 m. The acquisition was designed to obtain high-resolution, long offsets and a satisfactory signal-to-noise ratio. In the field, we used 48 channels and variable end-on roll-along spread that allowed us to record offsets of up to 375 m. Data processing was aimed at preserving relative amplitudes (known as RAP, relative amplitude preservation processing), an approach that is necessary for seismic inversion application. With the utilization of well log data and results of simultaneous inversion, we were able to calculate the elastic properties of the deposit to evaluate sulfur ore content and changes in lithology. The sulfur content is strongly dependent on the carbonate reservoir's porosity. To evaluate porosity changes and associated sulfur content, a simultaneous inversion procedure was used. This is a pioneering approach in which we applied pre-stack inversion methods to shallow carbonate sediments. [ABSTRACT FROM AUTHOR]