Search

Background: Adolescent idiopathic scoliosis (AIS) patients typically undergo surgical treatment as teenagers, follow-ups of >5 years are necessary to evaluate effects on peak pulmonary reserves. However, limited data is available regarding the long-term (>10 years) effects of surgical intervention on pulmonary function (PF) in patients with thoracic AIS., Objective: To provide long-term (>10 years) information on the PF after posterior spinal fusion for treating main thoracic AIS. We especially investigated whether surgical correction for AIS led to impairment of the PF., Methods: A total of 35 patients with main thoracic AIS treated with posterior spinal fusion were included. Radiographs and PF tests, which included measurements of absolute and percent-predicted values of forced vital capacity (FVC) and forced expiratory volume in 1 second (FEV1), were evaluated., Results: Mean age at surgery was 14.9 years (12-19 years). Mean follow-up period was 15.1 years (10-24 years). Although the final postoperative FVC and FEV1 absolute values were higher than the preoperative values, the differences were not statistically significant (p = 0.22 and p = 0.08, respectively). Percent-predicted FVC and FEV1 values between preoperative and final postoperative measurements were not statistically different (p = 0.63 and p = 0.29, respectively). However, for the patients who presented with pulmonary impairment preoperatively, both the FVC and FEV1 significantly increased at the final follow-up (p = 0.01 and p = 0.01, respectively)., Conclusions: Long-term results of AIS patients who underwent posterior spinal fusion in main thoracic curves demonstrated absolute and percent-predicted PF test values similar to preoperative measurements; thus, indicating that posterior spinal fusion did not decrease PF 15 years after the initial surgery. Instead, patients with severe preoperative pulmonary impairment might show some degree of improvement after surgery., Competing Interests: The authors have declared that no competing interests exist.

Background Context: Controversy exists regarding the effects of multilevel facetectomy and screw density on deformity correction, especially thoracic kyphosis (TK) restoration in adolescent idiopathic scoliosis (AIS) surgery., Purpose: This study aimed to evaluate the effects of multilevel facetectomy and screw density on sagittal plane correction in patients with main thoracic (MT) AIS curve., Study Design: A retrospective correlation and comparative analysis of prospectively collected, consecutive, non-randomized series of patients at a single institution was undertaken., Patient Sample: Sixty-four consecutive patients with Lenke type 1 AIS treated with posterior correction and fusion surgery using simultaneous double-rod rotation technique were included., Outcome Measures: Patient demographics and preoperative and 2-year postoperative radiographic measurements were the outcome measures for this study., Methods: Multiple stepwise linear regression analysis was conducted between change in TK (T5-T12) and the following factors: age at surgery, Risser sign, number of facetectomy level, screw density, preoperative main thoracic curve, flexibility in main thoracic curve, coronal correction rate, preoperative TK, and preoperative lumbar lordosis. Patients were classified into two groups: TK<15° group defined by preoperative TK below the mean degree of TK for the entire cohort (<15°) and the TK≥15° group, defined by preoperative TK above the mean degree of kyphosis (≥15°). Independent sample t tests were used to compare demographic data as well as radiographic outcomes between the two groups. There were no study-specific biases related to conflicts of interest., Results: The average preoperative TK was 14.0°, which improved significantly to 23.1° (p<.0001) at the 2-year final follow-up. Greater change in TK was predicted by a low preoperative TK (p<.0001). The TK <15° group showed significant correlation between change in TK and number of facetectomy level (r=0.492, p=.002). Similarly, significant correlation was found between change in TK and screw density (r=0.333, p=.047). Conversely, in the TK ≥15° group, correlation was found neither between change in TK and number of facetectomy level (r=0.047, p=.812), nor with screw density (r=0.030, p=.880). Furthermore, in patients with preoperative TK<15°, change in TK was significantly correlated with screw density at the concave side (r=0.351, p=.036) but not at the convex side (r=0.144, p=.402)., Conclusions: In patients with hypokyphotic thoracic spine, significant positive correlation was found between change in TK and multilevel facetectomy or screw density at the concave side. This indicates that in patients with AIS who have thoracic hypokyphosis as part of their deformity, the abovementioned factors must be considered in preoperative planning to correct hypokyphosis., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Purpose: There is limited consensus on the optimal surgical strategy for double thoracic adolescent idiopathic scoliosis (AIS). Recent studies have reported that pedicle screw constructs to maximize scoliosis correction cause further thoracic spine lordosis. The objective of this study was to apply a new surgical technique for double thoracic AIS with rigid proximal thoracic (PT) curves and assess its clinical outcomes., Methods: Twenty one consecutive patients with Lenke 2 AIS and a rigid PT curve (Cobb angle ≥30º on side-bending radiographs, flexibility ≤30 %) treated with the simultaneous double-rod rotation technique (SDRRT) were included. In this technique, a temporary rod is placed at the concave side of the PT curve. Then, distraction force is applied to correct the PT curve, which reforms a sigmoid double thoracic curve into an approximate single thoracic curve. As a result, the PT curve is typically converted from an apex left to an apex right curve before applying the correction rod for PT and main thoracic curve., Results: All patients were followed for at least 2 years (average 2.7 years). The average main thoracic and PT Cobb angle correction rate at the final follow-up was 74.7 and 58.0 %, respectively. The average preoperative T5-T12 thoracic kyphosis was 9.3°, which improved significantly to 19.0° (p < 0.0001) at the final follow-up. Although 71 % patients had preoperative level shoulders or a positive radiographic shoulder height, all patients had mildly imbalanced or balanced shoulders at the final follow-up. The average preoperative main thoracic apical vertebral rotation angle of 20.7° improved significantly after surgery to 16.4° (p = 0.0046), while the average preoperative total SRS questionnaire score of 3.7 improved significantly to 4.4 (p = 0.0012) at the final follow-up., Conclusions: Radiographic findings and patient outcomes were satisfactory. Thoracic kyphosis can be maintained or improved, while coronal and axial deformities can be corrected using SDRRT for Lenke 2 AIS with a rigid PT curve.

Study Design: Retrospective analysis of a prospectively collected, consecutive, nonrandomized series of patients., Objective: To assess the surgical outcomes of the simultaneous double-rod rotation technique for treating Lenke 1 thoracic adolescent idiopathic scoliosis (AIS)., Summary of Background Data: With the increasing popularity of segmental pedicle screw spinal reconstruction for treating AIS, concerns regarding the limited ability to correct hypokyphosis have also increased., Methods: A consecutive series of 32 patients with Lenke 1 main thoracic AIS treated with the simultaneous double-rod rotation technique at our institution was included. Outcome measures included patient demographics, radiographical measurements, and Scoliosis Research Society questionnaire scores., Results: All 32 patients were followed up for a minimum of 2 years (average, 3.6 yr). The average main thoracic Cobb angle correction rate and the correction loss at the final follow-up were 67.8% and 3.3°, respectively. The average preoperative thoracic kyphosis (T5-T12) was 11.9°, which improved significantly to 20.5° (P < 0.0001) at the final follow-up. An increase in thoracic kyphosis was significantly correlated with an increase in lumbar lordosis at the final follow-up (r = 0.42). The average preoperative vertebral rotation angle was 19.7°, which improved significantly after surgery to 14.9° (P = 0.0001). There was no correlation between change in thoracic kyphosis and change in apical vertebral rotation (r =-0.123). The average preoperative total Scoliosis Research Society questionnaire score was 3.0, which significantly improved to 4.4 (P < 0.0001) at the final follow-up. Throughout surgery and even after, there were no instrumentation failures, pseudarthrosis, infection of the surgical site, or clinically relevant neurovascular complications., Conclusion: The simultaneous double-rod rotation technique for treating Lenke 1 AIS provides significant sagittal correction of the main thoracic curve while maintaining sagittal profiles and correcting coronal and axial deformities., Level of Evidence: 4.

Study Design: Retrospective review., Objective: To assess the long-term outcomes of anterior spinal fusion (ASF) for treating thoracic adolescent idiopathic scoliosis (AIS)., Summary of Background Data: Although ASF is reported to provide good coronal and sagittal correction of the main thoracic (MT) AIS curves, the long-term outcomes of ASF is unknown., Methods: A consecutive series of 25 patients with Lenke 1 MT AIS were included. Outcome measures comprised radiographical measurements, pulmonary function, and Scoliosis Research Society outcome instrument (SRS-30) scores (preoperative SRS-30 scores were not documented). Postoperative surgical revisions and complications were recorded., Results: Twenty-five patients were followed-up for 12 to 18 years (average, 15.2 yr). The average MT Cobb angle correction rate and the correction loss at the final follow-up were 56.7% and 9.2°, respectively. The average preoperative instrumented level of kyphosis was 8.3°, which significantly improved to 18.6° (P = 0.0003) at the final follow-up. The average percent-predicted forced vital capacity and forced expiratory volume in 1 second were significantly decreased during long-term follow-up measurements (73% and 69%; P = 0.0004 and 0.0016, respectively). However, no patient had complaints related to pulmonary function. The average total SRS-30 score was 4.0. Implant breakage was not observed. All patients, except 1 who required revision surgery, demonstrated solid fusion. Late instrumentation-related bronchial problems were observed in 1 patient who required implant removal and bronchial tube repair, 13 years after the initial surgery., Conclusion: Overall radiographical findings and patient outcome measures of ASF for Lenke 1 MT AIS were satisfactory at an average follow-up of 15 years. ASF provides significant sagittal correction of the main thoracic curve with long-term maintenance of sagittal profiles. Percent-predicted values of forced vital capacity and forced expiratory volume in 1 second were decreased in this cohort; however, no patient had complaints related to pulmonary function.

Background: Anterior spinal fusion with instrumentation is used for the treatment of thoracolumbar/lumbar scoliosis. The aim of this long-term, retrospective, hospital-based cohort study was to determine the outcomes of anterior dual-rod instrumentation in a consecutive series of patients with thoracolumbar/lumbar adolescent idiopathic scoliosis managed by a single surgeon at a single institution., Methods: A consecutive series of thirty-two patients with Lenke type-5C thoracolumbar/lumbar adolescent idiopathic scoliosis were included. Outcome measures included patient demographics, radiographic measurements, adjacent-segment degeneration, pulmonary function, and Scoliosis Research Society outcome instrument (SRS-30) scores. Perioperative and postoperative complications were recorded., Results: Thirty patients were followed for a mean of 17.2 years (range, twelve to twenty-three years). The mean thoracolumbar/lumbar Cobb angle correction rate and correction loss at the time of the latest follow-up were 79.8% and 3.4°, respectively. The average percent-predicted forced vital capacity and forced expiratory volume in one second were 91.8% and 81.8%, respectively. The average total SRS-30 score was 4.2. Mild degeneration below the fusion mass was observed in 23% of the patients. No instrumentation failure, pseudarthrosis, surgical site infection, or clinically relevant neurovascular complications were observed. Two patients required surgical revision with posterior spinal instrumentation, one because of subjacent disc wedging and the other because of progression of the thoracic curve deformity., Conclusions: Radiographic findings, pulmonary function, and clinical measures were satisfactory at the time of follow-up, at a minimum of twelve years. Anterior dual-rod instrumentation remains a useful surgical treatment for Lenke type-5C thoracolumbar/lumbar adolescent idiopathic scoliosis.

Object: Use of computer-assisted spine surgery (CASS) technologies, such as navigation systems, to improve the accuracy of pedicle screw (PS) placement is increasingly popular. Despite of their benefits, previous CASS systems are too expensive to be ubiquitously employed, and more affordable and portable systems are desirable. The aim of this study was to introduce a novel and affordable computer-assisted technique that 3-dimensionally visualizes anatomical features of the pedicles and assists in PS insertion. The authors have termed this the 3D-visual guidance technique for inserting pedicle screws (3D-VG TIPS)., Methods: The 3D-VG technique for placing PSs requires only a consumer-class computer with an inexpensive 3D DICOM viewer; other special equipment is unnecessary. Preoperative CT data of the spine were collected for each patient using the 3D-VG TIPS. In this technique, the anatomical axis of each pedicle can be analyzed by volume-rendered 3D models, as with existing navigation systems, and both the ideal entry point and the trajectory of each PS can be visualized on the surface of 3D-rendered images. Intraoperative guidance slides are made from these images and displayed on a TV monitor in the operating room. The surgeon can insert PSs according to these guidance slides. The authors enrolled 30 patients with adolescent idiopathic scoliosis (AIS) who underwent posterior fusion with segmental screw fixation for validation of this technique., Results: The novel technique allowed surgeons, from office or home, to evaluate the precise anatomy of each pedicle and the risks of screw misplacement, and to perform 3D preoperative planning for screw placement on their own computer. Looking at both 3D guidance images on a TV monitor and the bony structures of the posterior elements in each patient in the operating theater, surgeons were able to determine the best entry point for each PS with ease and confidence. Using the current technique, the screw malposition rate was 4.5% in the thoracic region in corrective surgery for AIS., Conclusions: The authors found that 3D-VG TIPS worked on a consumer-class computer and easily visualized the ideal entry point and trajectory of PSs in any operating theater without costly special equipment. This new technique is suitable for preoperative planning and intraoperative guidance when performing reconstructive surgery with PSs.

The authors present a new posterior correction technique consisting of simultaneous double-rod rotation using 2 contoured rods and polyaxial pedicle screws with or without Nesplon tapes. The purpose of this study is to introduce the basic principles and surgical procedures of this new posterior surgery for correction of adolescent idiopathic scoliosis. Through gradual rotation of the concave-side rod by 2 rod holders, the convex-side rod simultaneously rotates with the the concave-side rod. This procedure does not involve any force pushing down the spinal column around the apex. Since this procedure consists of upward pushing and lateral translation of the spinal column with simultaneous double-rod rotation maneuvers, it is simple and can obtain thoracic kyphosis as well as favorable scoliosis correction. This technique is applicable not only to a thoracic single curve but also to double major curves in cases of adolescent idiopathic scoliosis.

Study Design: Retrospective study., Objectives: To compare the surgical outcomes of posterior translational correction and fusion using hybrid instrumentation systems with either sublaminar Nesplon tape or sublaminar metal wire to treat adolescent idiopathic scoliosis (AIS)., Summary of Background Data: Nesplon tape, which consists of a thread of ultra-high molecular weight polyethylene fibers, has advantages over metal wire: (1) its soft and flexible properties avoid neural damage and (2) its flat configuration avoids focal distribution of the stresses to lamina; however, the efficacy of Nesplon tape in the correction of spinal deformity is as yet, still unclear., Methods: Thirty AIS patients at a single institution underwent posterior correction and fusion using hybrid instrumentation containing hook, pedicle screw, and either sublaminar polyethylene taping (15) or sublaminar metal wiring (15). Patients were evaluated preoperatively, immediately after surgery, and at a 2-year follow-up according to the radiographic changes in curve correction, operating time, intraoperative blood loss, complications, and the Scoliosis Research Society patient questionnaire (SRS-24) score., Results: The average correction rate was 63.0% in the Nesplon tape group and 59.9% in the metal wire group immediately after surgery (P = 0.62). Fusion was obtained in all the patients without significant correction loss in both groups. There was no significant difference in operative time, intraoperative blood loss, and postoperative SRS-24 scores between the 2 groups. Complications were superficial skin infection in a single patient in the Nesplon tape group, and transient sensory disturbance in 1 patient and temporal superior mesenteric artery syndrome in another patient in the metal wire group., Conclusions: The efficacy of Nesplon tape in correction of deformity is equivalent to that of metal wire, and fusion was completed without significant correction loss. The soft and flexible properties and flat configuration of Nesplon tape make this a safe application for the treatment of AIS with bone fragility or with the fusion areas containing the spinal cord.

Study Design: The accuracy of pedicle screw placement was evaluated in posterior scoliosis surgeries with or without the use of computer-assisted surgical techniques., Objective: In this retrospective cohort study, the pedicle screw placement accuracy in posterior scoliosis surgery was compared between conventional fluoroscopic and computer-assisted surgical techniques., Summary of Background Data: There has been no study systemically analyzing the perforation pattern and comparative accuracy of pedicle screw placement in posterior scoliosis surgery., Methods: The 45 patients who received posterior correction surgeries were divided into 2 groups: Group C, manual control (25 patients); and Group N, navigation surgery (20 patients). The average Cobb angles were 73.7 degrees and 73.1 degrees before surgery in Group C and Group N, respectively. Using CT images, vertebral rotation, pedicle axes as measured to anteroposterior sacral axis and vertebral axis, and insertion angle error were measured. In perforation cases, the angular tendency, insertion point, and length abnormality were evaluated., Results: The perforation was observed in 11% of Group C and 1.8% in Group N. In Group C, medial perforations of left screws were demonstrated in 8 of 9 perforated screws and 55% were distributed either in L1 or T12. The perforation consistently occurred in pedicles in which those axes approached anteroposterior sacral axis within 5 degrees . The average insertion errors were 8.4 degrees and 5.0 degrees in Group C and Group N, respectively, which were significantly different (P < 0.02)., Conclusion: The medial perforation in Group C occurred around L1, especially when pedicle axis approached anteroposterior sacral axis. This consistent tendency was considered as the limitation of fluoroscopic screw insertion in which horizontal vertebral image was not visible. The use of surgical navigation system successfully reduced the perforation rate and insertion angle errors, demonstrating the clear advantage in safe and accurate pedicle screw placement of scoliosis surgery.

Study Design: A nondestructive biomechanical investigation among five anterior spinal instrumentation systems for scoliosis., Objectives: The purpose of this study is to analyze the static and dynamic biomechanical stability of five different systems., Summary of Background Data: Although a variety of anterior spinal instrumentation systems for scoliosis are available, very few attempts have been made at comparative biomechanical studies., Methods: Thirty calf spines were underwent static biomechanical tests, including flexion-extension, axial rotation, and lateral bending loading modes in the multisegmental spinal model. Five anterior instrumentation systems included: 1) Texas Scottish Rite Hospital system; 2) Bad Wildungen Metz; 3) anterior ISOLA; 4) Cotrel-Dubousset Hoph; and 5) Kaneda Anterior Scoliosis System. The initial and postfatigue stability after a cyclic loading test were analyzed by measuring the range of motion at instrumented segments compared to the intact within the same specimen (% to intact)., Results: Two-rod systems showed a significant decrease in range of motion compared to one-rod systems in flexion-extension (P < 0.001) and axial rotation (P < 0.05). In lateral bending, all systems demonstrated a significant decrease in range of motion of less than 40% to the intact (P < 0.001). After cyclical loading test, all systems increased in range of motion. In flexion-extension, one-rod systems depicted a significant increase in range of motion, compared to two-rod systems (P < 0.05)., Conclusions: In the initial stability analysis, two-rod systems are superior to one-rod systems. For one-rod systems, repeated physiologic loading may result in reduced stability in flexion-extension.

Study Design: A biomechanical study was designed to assess the bone-screw interface fixation strength among five anterior spinal instrumentation systems for scoliosis before and after a fatigue simulation., Objectives: The objectives of the current study were twofold: 1) evaluate the static (initial) strength at the bone-screw interface and 2) evaluate dynamic (post fatigue) strength of the bone-screw interface after a fatigue simulation to investigate a possible mechanism for postoperative loss of correction., Summary of Background Data: Although the recent advancement of anterior instrumentation for scoliosis has permitted shorter fusion segments and improved surgical correction, the loss of correction over the instrumented segments still has been reported in one-rod systems. Little is known about the mechanism for loss of correction., Methods: Twenty-five fresh-frozen calf spines (T6-L6) were used. A total of five instrumentation systems included the following: Anterior ISOLA (ISOLA), Bad Wildungen Metz (BWM), Texas Scottish Rite Hospital system (TSRH), Cotrel-Dubousset Hoph (CDH), and Kaneda Anterior Scoliosis System (KASS). Screw pullout and rotational tests in the sagittal plane using a single vertebra were performed to investigate bone-screw interface fixation strength before and after a fatigue simulation. To simulate cyclic loading that the spine could undergo in vivo, a fatigue simulation using compressive-flexion loading up to 24,000 cycles was carried out., Results: Mean maximum tensile pullout force decreased in the following order: KASS > CDH > BWM > TSRH > ISOLA (F = 29.91, P < 0.0001). KASS blunt tip screw was 26% stronger in pullout force than KASS sharp tip screw (P < 0.05). The one-rod system demonstrated a positive correlation between pullout force and both bone mineral density and screw insertional torque. For fatigue analysis the rotational strength at the most cephalad and caudal segments significantly decreased after a fatigue simulation in the one-rod system (P < 0.05). The two-rod system showed no significant decrease after a fatigue simulation., Conclusions: Simulating the cyclic loading to the construct, screw loosening at the bone-screw interface was produced in the one-rod system. This screw loosening may elucidate one mechanism for loss of correction in the one-rod system. The two-rod system may have the potential to minimize the risk of loss of correction.

Study Design: Analysis of the clinical results of 20 patients with thoracic scoliosis treated by anterior procedure with Kaneda anterior spinal system., Objectives: To evaluate the efficacy of the anterior surgical correction procedure with a new anterior instrumentation in thoracic scoliosis., Summary of Background Data: Posterior correction and fusion with posterior instrumentation has been a main component of the surgical management of thoracic scoliosis. However, to the best of the authors' knowledge, no clinical results of anterior instrumentation surgery for thoracic scoliosis have been published in the English literature., Methods: Anterior correction and fusion using Kaneda anterior spinal system was performed in 20 patients with thoracic scoliosis (3 patients with King Type II curve, 13 with Type III, and 4 with Type IV). The average follow-up was 3 years, with a range of 2 years, 3 months to 4 years, 1 month. There were 1B patients with idiopathic scoliosis (13 adolescents and 5 adults) and 2 patients with a single thoracic curve caused by other etiologies. All patients had correction of scoliosis by fusion within the major thoracic curve. Radiographic evaluations were performed to analyze frontal, sagittal, and rotational deformities of the spine., Results: The average correction rate of scoliosis was 71%. Above the instrumented levels, the correction rate was 75%. Preoperative kyphosis of the instrumented levels of 7 degrees was corrected to 14 degrees of kyphosis. The trunk shift was improved from 17 mm before surgery to 9 mm at final follow-up evaluation. The average improvement of the tilt-angle in the lower and vertebra of fusion was 81%, and was 83% in the stable vertebra. Apical vertebral rotation showed correction rate of 15% in patients without performing resection of the rib head joints and rod rotation maneuver (n = 6). However, the correction rate was improved to 58% after introduction of the technique discussed (n = 14). The angle of tangential rib deformity (rib hump) showed a correction rate of 50%. There was 1.2 degrees of frontal plane and 1.0 degree of sagittal plane correction loss within the instrumented area at final follow-up evaluation. At final follow-up, nonunion at the uppermost segment of the fusion range developed in one patient, and decompensation in the lumbar spine was observed in one patient with Type II curve., Conclusions: Anterior correction with Kaneda anterior spinal system provides excellent correction of the frontal curvature and sagittal alignment by fusing within the range of the major curve, without a significant loss of correction and implant failure. Rigid rotational deformity of the thoracic scoliosis is effectively corrected by resection of the rib head joints and rod rotation maneuver. However, too much correction of the thoracic curve should be avoided, to prevent decompensation of the lumbar curve, especially in Type II curves.

Study Design: The Kaneda multisegmental instrumentation is a new anterior two-rod system for the correction of thoracolumbar and lumbar spine deformities. This system consists of a vertebral plate and two vertebral screws for individual vertebral bodies and two semirigid rods to interconnect the vertebral screws. Clinical results of 25 thoracolumbar and lumbar scoliosis patients treated with this new instrumentation were analyzed., Objectives: To evaluate the efficacy of the new anterior instrumentation in correction and stabilization of thoracolumbar and lumbar scoliosis., Summary of Background Data: Since Dwyer first introduced the concept of anterior spinal instrumentation and fusion for scoliosis, anterior surgery has gradually gained acceptance. In 1976, a useful modification for the anterior spinal instrumentation, which reportedly provided means of lordosation and vertebral body derotation, was described. However, some authors reported a high tendency of the implant breakage, loss of correction, progression of the kyphosis, and pseudoarthrosis as the major complications. To overcome the disadvantages of Zielke instrumentation, the authors have developed a new anterior spinal instrumentation (two-rod system) for the management of thoracolumbar and lumbar scoliosis., Methods: Anterior correction and fusion using Kaneda multisegmental instrumentation was performed in 25 patients with thoracolumbar or lumbar scoliosis. The average follow-up period was 3 years, 1 month (range, 2 years to 4 years, 7 months). There were 20 patients with idiopathic scoliosis (13 adolescents and seven adults) and five patients with other types of scoliosis, including congenital and other etiologies. All patients had correction of scoliosis by fusion within the major curve, and for 16 of the 25 patients, the most distal end vertebra was not included in the fusion (short fusion). Radiographic evaluations were performed to analyze frontal and sagittal alignments of the spine., Results: The average correction rate of scoliosis was 83%. Over the instrumented levels, the correction rate was 90%. Preoperative kyphosis of the instrumented levels of 7 degrees was corrected to 9 degrees of lordosis. Sagittal lordosis of the lumbosacral area beneath the fused segments averaged 51 degrees before surgery and was reduced to 34 degrees after surgery. The trunk shift was improved from 25 mm before surgery to 4 mm at final follow-up evaluation. The average improvement in the lower end vertebra tilt-angle was 97% in those patients whose lower end vertebra was included in the fusion and 83% in patients whose lower end vertebra was not included in the fusion. Apical vertebral rotation showed an average correction rate of 86%. At final follow-up evaluation, all patients demonstrated solid fusion without implant-related complications. There was 1.5 degrees of frontal plane and 1.5 degrees of sagittal plane correction loss within the instrumented area at final follow-up evaluation., Conclusions: New anterior two-rod system showed excellent correction of the frontal curvature and sagittal alignment with extremely high correction capability of rotational deformities. Furthermore, correction of thoracolumbar kyphosis to physiologic lordosis was achieved. This system provides flexibility of the implant for smooth application to the deformed spine and overall rigidity to correct the deformity and maintain the fixation without a significant loss of correction or implant failure compared with conventional one-rod instrumentation systems in anterior scoliosis correction.

Three-dimensional configuration of the scoliotic spine was mathematically expressed by a spatial curve passing through each vertebral centroid ("vertebral body line"). Three-dimensional location of the vertebral centroid was determined from digitization on the frontal and sagittal roentgenograms. Cobb angle, which is clinically used for measuring scoliosis curvature, was calculated in space to evaluate scoliosis deformity three-dimensionally. In forty-five scoliotic spines, regardless of curvature and curve patterns, the spinal configurations were excellently approximated by vertebral body lines. Vertebral body lines swerved from the sagittal plane at the end vertebrae, but aligned on a certain plane within the scoliosis region. Three-dimensional Cobb angle, which was larger than that in the frontal plane, can be utilized to evaluate the scoliosis deformity.

The clinical presentations and radiological features of scoliosis accompanying syringomyelia were analyzed in 14 cases of syringomyelia associated with a in 14 cases of syringomyelia associated with a Chiari malformation in children. Scoliosis was the initial symptom in 11 out of 16 patients (64%) with syringomyelia and present in 14 (88%) at the initial examination. The scoliosis associated with syringomyelia was characterized by a higher incidence of a single curve (6 cases, 43%) and convexity to the left (7 cases, 50%) than seen in idiopathic scoliosis. The syrinx was shifted to the convex side of scoliosis on the axial section at the middle or lower thoracic level in patients with a single curve, and at the cervical or upper thoracic level in patients with a double curve. The authors think that the scoliosis develops in children as a result of damage done to the anterior horn, which innervates the muscles of the trunk, by an asymmetrically expanded syrinx.