Search

Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) was designed to study high-energy cosmic rays up to PeV and recorded data from August 22nd, 2017 to February 12th, 2019 on the ISS. In this analysis, the Silicon Charge Detector (SCD), CALorimeter (CAL), and Top and Bottom Counting Detectors (TCD/BCD) are used. The SCD is composed of four layers and provides the measurement of cosmic-ray charges with a resolution of $\sim$0.2e. The CAL comprises 20 interleaved tungsten plates and scintillators, measures the incident cosmic-ray particles' energies, and provides a high energy trigger. The TCD/BCDs consist of photodiode arrays and plastic scintillators and provide a low-energy trigger. In this analysis, the SCD top layer is used for charge determination. Here, we present the heavy nuclei analysis using the ISS-CREAM instrument.

The Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) experiment successfully recorded the data for about 539 days from August 2017 to February 2019. In this talk, we report the measurement of the cosmic-ray proton energy spectrum from the ISS-CREAM experiment in the energy range of 2.5 TeV - 650 TeV. For the analysis, we used the silicon charge detector (SCD) placed at the top of the ISS-CREAM payload to identify the incoming cosmic-ray charge. The SCD is finely segmented to minimize charge misidentification due to backscatter effects. The four-layer SCD consists of 10,752 silicon pixels, each of which is 1.37×1.57×0.05 cm^3 in size. The calorimeter (CAL) consists of 20 layers of tungsten/scintillating fibers preceded by carbon targets. It provided cosmic-ray tracking, energy determination, and the high-energy trigger. The Top and Bottom Counting detectors (T/BCD) are above and below the CAL, respectively, and provided the low energy trigger. Each T/BCD is composed of an array of 20×20 photodiodes on plastic scintillators. The measured proton spectral index of 2.67±0.02 between 2.5 and 12.5 TeV is consistent with prior CREAM measurements. The spectrum softens above∼10 TeV consistent with the bump-like structure as reported by CREAM-I+III, DAMPE, and NUCLEON, but ISS-CREAM extends measurements to higher energies than those prior measurement

International audience; Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) experi-ment is designed to study the composition and energy spectra of cosmic-ray particles from 10^12 to 10^15 eV. ISS-CREAM was launched and deployed to the ISS in August 2017. The ISS-CREAM payload employs a Silicon Charge Detector for charge measurements, Top and Bot-tom Counting Detector for electron-hadron separation and a low-energy trigger, a Boronated Scintillator Detector for additional electron-hadron separation, and a Calorimeter (CAL) for en-ergy measurements and a high-energy trigger. The CAL is constructed of 20 layers of tungsten plates interleaved with scintillating fiber ribbons read out by hybrid-photodiodes (HPDs) and densified carbon targets. Each CAL layer is made of 3.5 mm (1 X_0) thick tungsten plates alter-nating with fifty 0.5 mm thick and 1 cm wide scintillating fiber ribbons. Consecutive layers of fiber ribbons are installed orthogonal to each other. Energy deposition in the CAL determines the particle energy and provides tracking information to determine which segment(s) of the charge detectors to use for the charge measurement. Tracking for showers is accomplished by extrapolating each shower axis back to the charge detectors. The performance of the ISS-CREAM CAL during flight is presented.

International audience; Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM) is an experiment for studying the origin, acceleration, and propagation mechanisms of high-energy cosmic rays. The ISS-CREAM instrument was launched on the 14th of August 2017 to the ISS aboard the SpaceX-12 Dragon spacecraft. The Top and Bottom Counting Detectors (TCD/BCD) are parts of the ISS-CREAM instrument and designed for studying electron and gamma-ray physics. The TCD/BCD each consist of an array of 20 × 20 photodiodes on a plastic scintillator. The TCD/BCD can separate electrons from protons by using the difference between the shapes of electromagnetic and hadronic showers in the high energy region. The Boosted Decision Tree (BDT) method, which is a deep learning method, is used in this separation study. We will present results of the electron/proton separation study and rejection power in various energy ranges.

International audience; Cosmic Ray Energetics and Mass for the International Space Station (ISS-CREAM) is designed to directly measure the energy spectra of high-energy cosmic rays, encompassing proton to iron nuclei, over the energy range from 1012 to 1015 eV [1]. The capability to measure an extended energy range enables us to probe the origin and acceleration mechanisms of cosmic rays. The ISS-CREAM instrument is configured with the balloon-borne CREAM calorimeter (CAL) for energy measurements and four layers of a finely segmented Silicon Charge Detector (SCD) for charge measurements. In addition, two new compact detectors have been developed for electron/proton separation: Top and Bottom scintillator-based counting detectors (TCD/BCD) and a boronated scintillator detector (BSD). Simulations use the GEANT3 package [2] with the FLUKA hadronic model [3]. An isotropic event generator was developed for the ISS-CREAM geometry with particles incident from the upper hemisphere. We will present simulation results regarding ISS-CREAM performance, including trigger rates, energy resolution, energy response, tracking resolution, charge efficiency, etc.

International audience; The ISS-CREAM payload was launched on the SpaceX-12 Commercial Resupply Service mission to the International Space Station (ISS) from NASA’s Kennedy Space Center on August 14, 2017. It was successfully installed and activated on the ISS Japanese Experiment Module Exposed Facility as an attached payload on August 22, 2017. The ISS-CREAM instrument is configured with complementary particle detectors capable of measuring elemental spectra for Z = 1 - 26 nuclei in the energy range ~10^12 – 10^15 eV; as well as electrons at multi-TeV energies. The four layers of its finely segmented Silicon Charge Detectors provide precise charge measurements, and its ionization Calorimeter provides energy measurements. In addition, scintillator-based Top and Bottom Counting Detectors and a Boronated Scintillator Detector distinguish electrons from nuclei. The goal is to understand cosmic ray origin, acceleration and propagation by extending direct measurements of cosmic rays to the highest practical energy. On-orbit performance of the instrument and preliminary results from the ongoing analysis are presented.