Search

Quaternary sputtered TiAlSiN coatings were investigated for their high temperature structural stability, surface morphology, mechanical behaviors, surface chemical bonding states, solar absorptance and thermal emittance for possible solar selective surface applications. The TiAlSiN films were synthesized, via unbalanced magnetron sputtered technology, on AISI M2 steel substrate and annealed at 500 °C - 800 °C temperature range. SEM micrographs show nanocomposite-like structure with amorphous grain boundaries. Nanoindentation analyses indicate a decrease of hardness, plastic deformation and constant yield strength for the coatings. XPS analysis show mixed Ti, Al and Si nitride and oxide as main coating components but at 800 °C the top layer of the coatings is clearly composed of only Ti and Al oxides. Synchrotron radiation XRD (SR-XRD) results indicate various Ti, Al and Si nitride and oxide phases, for the above annealing temperature range with a phase change occurring with the Fe component of the substrate. UV–Vis spectroscopy, FTIR spectroscopy studies determined a high solar selectivity, s of 24.6 for the sample annealed at 600 °C. Overall results show good structural and morphological stability of these coatings at temperatures up to 800 °C with a very good solar selectivity for real world applications. [ABSTRACT FROM AUTHOR]

Silicon nanowires (SiNWs) have been grown on crystalline silicon (Si), indium tin oxide (ITO) and stainless steel (SS) substrates using a gold catalyst coating with a thickness of 200 nm via pulsed plasma-enhanced chemical vapor deposition (PPECVD). Their morphological, mineralogical and surface characteristics have been investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman analysis. SiNWs growth is accompanied by oxidation, thus yielding partially (SiO) and fully oxidized (SiO) Si sheaths. The mean diameters of these SiNWs range from 140 to 185 nm. Si with (111) and (220) planes exists in SiNWs grown on all three substrates while Si with a (311) plane is detected only for Si and ITO substrates. Computational simulation using density functional theory (DFT) has also been conducted to supplement the experimental Raman analyses for crystalline Si and SiO. XPS results reveal that ca. 30 % of the SiNWs have been oxidized for all substrates. The results presented in this paper can be used to aid selection of appropriate substrates for SiNW growth, depending on specific applications. [ABSTRACT FROM AUTHOR]

Abstract: New cobalt-based metal oxide thin films (MxCoyOz with M=Mn, Cu, Ni) have been deposited on commercial aluminum and glass substrates using sol–gel dip-coating method. The as-deposited films were characterized by a wide range of complementary techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), spectrophotometry and nanoindentation techniques. A light absorption study for coatings on glass substrates within a wavelength range of 300–1100nm was also conducted. Topographical and morphological investigations showed the presence of nano-sized, grain-like particles in the copper–cobalt oxide coatings, which consequently had the roughest surface among the three coatings. All coatings on glass substrate exhibited higher absorption of ultraviolet (UV) light compared to visible light, while coatings on aluminum substrate generally had low reflectance (<50%) of UV light, moderate reflectance (<80%) of visible light and high reflectance (up to 100%) of infrared light. Implications of optical properties as a function of film thickness controlled by dip-heating cycles were discussed. The elastic modulus (E) and hardness (H) of thin film samples compared with stand‐alone commercial aluminum substrate were also measured. [Copyright &y& Elsevier]

Abstract: A series of nano hydroxyapatite–gelatine composites with different dilute solutions of gelatine concentrations were synthesized by a thermally assisted low-power ultrasonic irradiation method. The gelatine hydroxyapatite, (Gel–HAP) nanoparticles were prepared using Ca(NO3)2 and KH2PO4 in the presence of gelatine in an aqueous solution. The synthesised products were heat treated between 100 and 400°C. The effect of the addition of gelatine on the nucleation and growth of synthesised nano HAP was investigated. Characterisation was performed using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FT-IR). The characterisation results indicate that gelatine has been appended to the nano HAP forming regular spherical shaped crystals of nano sized Gel–HAP. [Copyright &y& Elsevier]

In this study, novel iron-based spiky microparticles (approximately 1–2μm in diameter) were synthesized using iron oxalate precursors using a straightforward one-step hydrothermal reaction. The microparticles’ morphological, mineralogical and chemical properties were investigated using scanning electron microscopy (SEM), X-ray diffractometry (XRD), Raman spectroscopy and UV-Vis spectroscopy. The physico-chemical characteristics of spiky microparticles were also compared with cubic iron microparticles synthesized using standalone iron as well as with the addition of glycine. XRD and Raman analyses identified substantial presence of humboldtine, a type of ferrous oxalate dehydrate mineral, in the resultant yellowish solid hydrothermal product. The mechanism involving reactions of species in the hydrothermal process was described herein. The results described in this study afford vital insights into the design of iron oxalate-based microparticles synthesis processes. [ABSTRACT FROM AUTHOR]

Abstract: Nanostructured hydroxyapatite (HAP) was prepared by a wet precipitation method using Ca(NO3) and KH2PO4 as the main material and NH3 as the precipitator under ultrasonic irradiation. The Ca/P ratio was set at 1.67 and the pH maintained at a minimum of 9. The temperature conditions and ultrasound influences were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FT-IR). The results showed that Nano-HAP can be obtained by this method and the particles were achieved to around 30nm. [Copyright &y& Elsevier]