Search

This study aimed to investigate the impact of individual drought, heat, and combined drought and heat stress on twelve cotton genotypes, including eight tolerant and four susceptible genotypes. A field experiment was carried out by employing a randomized complete block split-plot design, with treatments (control, drought, heat, drought + heat), and cotton genotypes assigned to the main plots and sub-plots respectively. The results showed that the combined stress had a more severe impact on the yield and fiber quality of cotton genotypes compared to individual stresses. Among the studied genotypes, FB-Shaheen, FH-207, MNH-886, and White Gold exhibited superior performance in regard to agronomic and fiber quality characters under combined stress environments. Physiological parameters, including transpiration rate, stomatal conductance, relative water contents, and photosynthetic rate, were significantly reduced under combined stress. However, specific genotypes, MNH-886, FH-207, White Gold, and FB-Shaheen, demonstrated better maintenance of these parameters, indicating their enhanced tolerance to the combined stress. Furthermore, the accumulation of reactive oxygen species was more pronounced under combined stress compared to individual stressors. Tolerant genotypes showed lower levels of H2O2 and MDA accumulation, while susceptible genotypes exhibited higher levels of oxidative damage. Antioxidant enzyme activities, such as superoxide dismutase, peroxidase, and catalase, increased under combined stress, with tolerant genotypes displaying higher enzyme activities. Conversely, susceptible genotypes (AA-703, KZ 191, IR-6, and S-15) demonstrated lower increases in enzymatic activities under combined stress conditions. Biochemical traits, including proline, total phenolic content, flavonoids, and ascorbic acid, exhibited higher levels in resistant genotypes under combined stress, while sensitive genotypes displayed decreased levels of these traits. Additionally, chlorophyll a & b, and carotenoid levels were notably decreased under combined stress, with tolerant genotypes experiencing a lesser decrease compared to susceptible genotypes.

To understand the effect of heat stress on morphology and physiology of the cotton, eight cotton genotypes with their 15F1 hybrids (five lines, three testers) were grown in the field conditions under randomized complete block design (RCBD) with two treatments i.e. normal and high-temperature stresses with two replications followed by split-plot arrangement. Data were collected for biochemical and yield-related parameters. Mean values of all studied traits were reduced significantly under high-temperature stress whilst the mean value of lint%, catalase activity, total soluble proteins, peroxidase, and carotenoids were increased under high-temperature. Under both conditions, the number of bolls, boll weight, seed cotton yield, lint index, seed mass per boll, hydrogen peroxide content, catalase activity, total soluble proteins, carotenoids, and chlorophyll contents had high heritability values along with high genetic advance percent mean which revealed, these traits were controlled by additive gene action. The lint%, seed index, short fiber index, fiber strength, fiber fineness, upper half mean length and peroxidase activity had high heritability with moderate genetic advance under heat stress conditions which showed, these traits were controlled by non-additive gene action. Under both temperature conditions, FH-458, IUB-65, CRS-2, and FH-313 were good general combiners for physicochemical and yield-related traits. The cross combination of IUB-013× CRS-2 and FH-458× FH-313 were good specific combiner for plant height and seed cotton yield whilst for fiber quality and biochemical traits, the best specific combiners were VH-329× FH-313 and IUB-013× CRS-2. These identified parents and cross combinations might be used for improving already present commercial varieties under high-temperature stress.

Abstract Background Cotton (Gossypium hirsutum L.) is grown for fiber and oil purposes in tropical and sub-tropical areas of the world. Pakistan is the 4th largest producer of cotton. It has a significant contribution in the GDP of Pakistan. Therefore, the present study was performed to assess the genetic variations and genetic diversity of yield and fiber quality traits in cotton and to analyze the associations present among them. Results Analysis of variance exhibited significant variation for all studied traits except total number of nodes and the height to node ratio. The phenotypic coefficient of variation was higher than the genotypic coefficient of variation for all studied traits. Plant height, monopodial branches, total number of bolls, lint index, seed index, and seed cotton yield displayed high heritabilities in a broad sense with maximum genetic advance. Correlation analysis revealed that seed cotton yield had a significant positive association with plant height, the number of monopodial branches, the number of sympodial branches, ginning outturn (GOT), the number of bolls, seed per boll, seed index, uniformity index, the number of sympodial branches, reflectance, and seed index at the genotypic level while a significant positive relationship was observed with plant height, the number of sympodial branches, boll number, and GOT. Plant height, monopodial branches, GOT, boll weight, seeds per boll, and short fiber index exerted direct positive effects on seed cotton yield. The first 6 principal component analysis (PCs) out of the total fourteen PCs displayed eigenvalues (> 1) and had maximum share to total variability (82.79%). The attributes that had maximum share to total divergence included plant height, uniformity index, the number of sympodial branches, seed per boll, GOT, seed cotton yield, and short fiber index. Conclusion The genotype AA-802, IUB-13, FH-159, FH-458, and CIM-595 were genetically diverse for most of the yield and fiber quality traits and could be utilized for the selection of better performing genotypes for further improvement.

Abstract Cotton (Gossypium spp.) contributes significantly to the economy of cotton-producing countries. Pakistan is the fourth-largest producer of cotton after China, the USA and India. The average yield of cotton is about 570.99 kg.hm− 2 in Pakistan. Climate change and different biotic stresses are causing reduction in cotton production. Transgenic approaches have unique advantage to tackle all these problems. However, how to confer permanent resistance in cotton against insects through genetic modification, is still a big challenge to address. Development of transgenic cotton has been proven to be effective. But its effectiveness depends upon several factors, including heterogeneity, seed purity, diffusion of varieties, backcrossing and ethical concerns. Cotton biotechnology was initiated in Pakistan in 1992–1993 with a focus on acquiring cotton leaf curl virus (CLCuV)-resistant insect-resistant, and improving fiber quality. This review summarizes the use of molecular markers, QTLs, GWAS, and gene cloning for cotton germplasm improvement, particularly in Pakistan.

Abstract The introduction of Bacillus thuringiensis (Bt) cotton has reduced the burden of pests without harming the environment and human health. However, the efficacy of Bt cotton has decreased due to field-evolved resistance in insect pests over time. In this review, we have discussed various factors that facilitate the evolution of resistance in cotton pests. Currently, different strategies like pyramided cotton expressing two or more distinct Bt toxin genes, refuge strategy, releasing of sterile insects, and gene silencing by RNAi are being used to control insect pests. Pyramided cotton has shown resistance against different cotton pests. The multiple genes pyramiding and silencing (MGPS) approach has been proposed for the management of cotton pests. The genome information of cotton pests is necessary for the development of MGPS-based cotton. The expression cassettes against various essential genes involved in defense, detoxification, digestion, and development of cotton pests will successfully obtain favorable agronomic characters for crop protection and production. The MGPS involves the construction of transformable artificial chromosomes, that can express multiple distinct Bt toxins and RNAi to knockdown various essential target genes to control pests. The evolution of resistance in cotton pests will be delayed or blocked by the synergistic action of high dose of Bt toxins and RNAi as well as compliance of refuge requirement.

The ever-changing global environment currently includes an increasing ambient temperature that can be a devastating stress for organisms. Plants, being sessile, are adversely affected by heat stress in their physiology, development, growth, and ultimately yield. Since little is known about the response of biochemical traits to high-temperature ambiance, we evaluated eight parental lines (five lines and three testers) and their 15 F1 hybrids under normal and high-temperature stress to assess the impact of these conditions over 2 consecutive years. The research was performed under a triplicate randomized complete block design including a split-plot arrangement. Data were recorded for agronomic, biochemical, and fiber quality traits. Mean values of agronomic traits were significantly reduced under heat stress conditions, while hydrogen peroxide, peroxidase, total soluble protein, superoxide dismutase, catalase (CAT), carotenoids, and fiber strength displayed higher mean values under heat stress conditions. Under both conditions, high genetic advance and high heritability were observed for seed cotton yield (SCY), CAT, micronaire value, plant height, and chlorophyll-a and b content, indicating that an additive type of gene action controls these traits under both the conditions. For more insights into variation, Pearson correlation analysis and principal component analysis (PCA) were performed. Significant positive associations were observed among agronomic, biochemical, and fiber quality-related traits. The multivariate analyses involving hierarchical clustering and PCA classified the 23 experimental genotypes into four groups under normal and high-temperature stress conditions. Under both conditions, the F1 hybrid genotype FB-SHAHEEN × JSQ WHITE GOLD followed by Ghuari-1, CCRI-24, Eagle-2 × FB-Falcon, Ghuari-1 × JSQ White Gold, and Eagle-2 exhibited better performance in response to high-temperature stress regarding the agronomic and fiber quality-related traits. The mentioned genotypes could be utilized in future cotton breeding programs to enhance heat tolerance and improve cotton yield and productivity through resistance to environmental stressors.

Seed germination is crucial for the life cycle of plants and maximum crop production. This critical developmental step is regulated by diverse endogenous [hormones, reactive oxygen species (ROS)] and exogenous (light, temperature) factors. Reactive oxygen species promote the release of seed dormancy by biomolecules oxidation, testa weakening and endosperm decay. Reactive oxygen species modulate metabolic and hormone signaling pathways that induce and maintain seed dormancy and germination. Endosperm provides nutrients and senses environmental signals to regulate the growth of the embryo by secreting timely signals. The growing energy demand of the developing embryo and endosperm is fulfilled by functional mitochondria. Mitochondrial matrix-localized heat shock protein GhHSP24.7 controls seed germination in a temperature-dependent manner. In this review, we summarize comprehensive view of biochemical and molecular mechanisms, which coordinately control seed germination. We also discuss that the accurate and optimized coordination of ROS, mitochondria, heat shock proteins is required to permit testa rupture and subsequent germination.

Molecular interventions have helped to explore the genes involved in fiber length, fiber strength, and other quality parameters with improved characteristics, particularly in cotton. The current study is an extension and functional validation of previous findings that Gh_A07G1537 influences fiber length in cotton using a chromosomal segment substitution line MBI7747 through RNA-seq data. The recombinant Gh_A07G1537 derived from the MBI7747 line was over-expressed in CCRI24, a genotype with a low profile of fiber quality parameters. Putative transformants were selected on MS medium containing hygromycin (25mg/ml), acclimatized, and shifted to a greenhouse for further growth and proliferation. Transgene integration was validated through PCR and Southern Blot analysis. Stable integration of the transgene (ΔGh_A07G1537) was validated by tracking its expression in different generations (T0, T1, and T2) of transformed cotton plants. It was found to be 2.97-, 2.86-, and 2.92-folds higher expression in T0, T1, and T2 plants, respectively, of transgenic compared with non-transgenic cotton plants. Fiber quality parameters were also observed to be improved in the engineered cotton line. Genetic modifications of Gh_A07G1537 support the improvement in fiber quality parameters and should be appreciated for the textile industry.