Search

Deep-marine two-part strata consisting of a sand-rich basal part overlain sharply by a mud-rich upper part have been termed linked debrites, hybrid event beds, transitional flow deposits, and bipartite facies. In continental slope and proximal basin floor strata of the Neoproterozoic Windermere Supergroup (western North America) and distal basin-floor strata of the Ordovician Cloridorme Formation (eastern North America), bipartite facies form the middle of a depositional continuum hundreds of meters long consisting upflow of thick-bedded, matrix-poor sandstone (<20% detrital mud matrix) to thin-bedded, sandy mudstone (50%–90% mud matrix). This consistent lithofacies change is interpreted to reflect particle settling in a rapidly but systematically evolving, negligibly sheared sand-mud suspension developed along the margins (Windermere) and downflow terminus (Cloridorme) of a high-energy, mud-enriched avulsion jet. In both study areas, beds of similar lithofacies type succeed one another vertically and transform to the next facies in the depositional continuum at about the same along-strike position, forming stratal units two to nine beds thick whose grain-size distribution gradually decreases upward. This spatial and temporal regularity is interpreted to be caused by multiple surges of a single, progressively waning turbidity current, with sufficient lag between successive surges for the deposition of a traction-structured sandstone overlain by mudstone cap. Furthermore, the systematic back-stepping or side-stepping recognized at the stratal unit scale is interpreted to have been driven by a combination of knickpoint migration and local topographic steering of the flows, which continued until the supply of mud from local seafloor erosion became exhausted, the main channel avulsed elsewhere, or a new stratal element developed. [ABSTRACT FROM AUTHOR]

The partitioning of different grain‐size classes in gravity flow deposits is one of the key characteristics used to infer depositional processes. Turbidites have relatively clean sandstones with most of their clay deposited as part of a mudstone cap or as a distal mudstone layer, whereas sand‐bearing debrites commonly comprise mixtures of sand grains and interstitial clay; hybrid event beds develop alternations of clean and dirty (clay‐rich) sandstones in varying proportions. Analysis of co‐genetic mudstone caps in terms of thickness and composition is a novel approach that can provide new insight into gravity flow depositional processes. Bed thickness data from the ponded Castagnola system show that turbidites contain more clay overall than do hybrid event beds. The Castagnola system is characterized by deposits of two very different petrographic types. Thanks to this duality, analyses of sandstone and mudstone composition allow inference of which proportion of the clay in each of the deposit types was acquired en route. In combination with standard sedimentological observations the new data allow insight into the likely characteristics of their parent flows. Clean turbidites were deposited by lower concentration, long duration, erosive, muddy turbidity currents which were more efficient at fractionating clay particles away from their basal layer. Hybrid event beds were deposited by shorter duration, higher‐concentration, less‐erosive sandier flows which were less efficient at clay fractionation. The results are consistent with data from other turbidite systems (for example, Marnoso‐arenacea). The approach represents a new method to infer the controls on the degree of clay partitioning in gravity flow deposits. [ABSTRACT FROM AUTHOR]

Shelf‐margin clinothem successions can archive process interactions at the shelf to slope transition, and their architecture provides constraints on the interplay of factors that control basin‐margin evolution. However, detailed textural analysis and facies distributions from shelf to slope transitions remain poorly documented. This study uses quantitative grain‐size and sorting data from coeval shelf and slope deposits of a single clinothem that crops out along a 5 km long, dip‐parallel transect of the Eocene Sobrarbe Deltaic Complex (Ainsa Basin, south‐central Pyrenees, Spain). Systematic sampling of sandstone beds tied to measured sections has captured vertical and basinward changes in sedimentary texture and facies distributions at an intra‐clinothem scale. Two types of hyperpycnal flow‐related slope deposits, both rich in mica and terrestrial organic matter, are differentiated according to grain size, sorting and bed geometry: (i) sustained hyperpycnal flow deposits, which are physically linked to coarse channelized sediments in the shelf setting and which deposit sand down the complete slope profile; (ii) episodic hyperpycnal flow deposits, which are disconnected from, and incise into, shelf sands and which are associated with sediment bypass of the proximal slope and coarse‐grained sand deposition on the medial and distal slope. Both types of hyperpycnites are interbedded with relatively homogenous, organic‐free and mica‐free, well‐sorted, very fine‐grained sandstones, which are interpreted to be remobilized from wave‐dominated shelf environments; these wave‐dominated deposits are found only on the proximal and medial slope. Coarse‐grained sediment bypass into the deeper‐water slope settings is therefore dominated by episodic hyperpycnal flows, whilst sustained hyperpycnal flows and turbidity currents remobilizing wave‐dominated shelf deposits are responsible for the full range of grain sizes in the proximal and medial slope, thus facilitating clinoform progradation. This novel dataset highlights previously undocumented intra‐clinothem variability related to updip changes in the shelf process‐regime, which is therefore a key factor controlling downdip architecture and resulting sedimentary texture. [ABSTRACT FROM AUTHOR]

[Display omitted] Deep-lacustrine systems are considerably less studied than their marine counterparts, mostly due to the low number of large and continuous outcrops worldwide. This study details outcrops and cores from Chang 7, Ordos Basin, China, which are composed dominantly of fine-grained deposits interbedded with amalgamated sandstones. Thick sandstone deposits, previously described as massive sandstones and interpreted as sandy debrites, are here re-interpreted as amalgamated sandstones, deposited by high-density turbidity currents associated with deep-lacustrine slope channels. Two outcrops composed of these deposits, which form intervals ranging from 6 to 20 m thick, laterally ranging from 600 to 1200 m, preserving evidence of sediment bypass such as erosional features and abundant trough cross-bedding, have been interpreted as lacustrine slope channels. Deposits composed dominantly of interbedded thin-bedded normal-graded sandstone and mudstone, with common occurrences of ripple cross-lamination (>70 % of the beds), interbedded with sporadic amalgamated medium-bedded sandstones have been interpreted as levee deposits. These deposits outcrop laterally to slope channel deposits, supporting the interpretation they are genetically and architecturally related. Similar deposits are also described in core, overlying channelised sand-prone deposits. Interbedded thin- to medium-bedded normal-graded sandstones and mudstones, which are not associated with a confining surface (non-channelised), nor an adjacent slope channel, have been interpreted as terminal splays. The re-interpretation of the sandstone-prone deposits of the Yanchang Formation as slope channel-levees to terminal splays provides a different approach to lateral and temporal distribution of architectural elements in intracratonic lacustrine basins, and therefore hydrocarbon exploration and production. [ABSTRACT FROM AUTHOR]

The Marnoso-arenacea Formation in the Italian Apennines is the only ancient rock sequence where individual submarine sediment density flow deposits have been mapped out in detail for over 100 km. Bed correlations provide new insight into how submarine flows deposit sand, because bed architecture and sandstone shape provide an independent test of depositional process models. This test is important because it can be difficult or impossible to infer depositional process unambiguously from characteristics seen at just one outcrop, especially for massive clean-sandstone intervals whose origin has been controversial. Beds have three different types of geometries (facies tracts) in downflow oriented transects. Facies tracts 1 and 2 contain clean graded and ungraded massive sandstone deposited incrementally by turbidity currents, and these intervals taper relatively gradually downflow. Mud-rich sand deposited by cohesive debris flow occurs in the distal part of Facies tract 2. Facies tract 3 contains clean sandstone with a distinctive swirly fabric formed by patches of coarser and better-sorted grains that most likely records pervasive liquefaction. This type of clean sandstone can extend for up to 30 km before pinching out relatively abruptly. This abrupt pinch out suggests that this clean sand was deposited by debris flow. In some beds there are downflow transitions from turbidite sandstone into clean debrite sandstone, suggesting that debris flows formed by transformation from high-density turbidity currents. However, outsize clasts in one particular debrite are too large and dense to have been carried by an initial turbidity current, suggesting that this debris flow ran out for at least 15 km. Field data indicate that liquefied debris flows can sometimes deposit clean sand over large (10 to 30 km) expanses of sea floor, and that these clean debrite sand layers can terminate abruptly. [ABSTRACT FROM AUTHOR]

Abstract: The West Crocker Formation (Oligocene–Early Miocene), NW Borneo, consists of a large (>20 000 km2) submarine fan deposited as part of an accretionary complex. A range of gravity-flow deposits are observed, the most significant of which are mud-poor, massive sandstones interpreted as turbidites and clast-rich, muddy sandstones and sandy mudstones interpreted as debrites. An upward transition from turbidite to debrite is commonly observed, with the contact being either gradational and planar, or sharp and highly erosive. Based on their repeated vertical relationship and the nature of the contact between them, these intervals are interpreted as being deposited from one flow event which consisted of two distinct flow phases: fully turbulent turbidity current and weakly turbulent to laminar debris flow. The associated bed is called a co-genetic turbidite–debrite, with the upper debrite interval termed a linked debrite. Linked debrites are best developed in the non-channellised parts of the fan system, and are absent to poorly-developed in the proximal channel-levee and distal basin floor environments. Due to outcrop limitations, the genesis of linked debrites within the West Crocker Formation is unclear. Based on clast size and type, it seems likely that a weakly turbulent to laminar debris-flow flow phase was present when the flow event entered the basin. A change in flow behaviour may have led to deposition of a sand-rich unit with ‘turbidite’ characteristics, which was subsequently overlain by a mud-rich unit with ‘debrite’ characteristics. Flow transformation may have been enhanced by the disintegration and incorporation into the flow of muddy clasts derived from the upstream channel floor, channel mouth or from channel-levee collapse. Lack of preservation of this debrite in proximal areas may indicate either bypass of this flow phase or that the available outcrops fail to capture the debris flow entry point. Establishing robust sedimentological criteria from a variety of datasets may lead to the increasing recognition of co-genetic turbidite-debrite beds, and an increased appreciation of the importance of bipartite flows in the transport and deposition of sediments in deepwater environments. [Copyright &y& Elsevier]