Search

Dynamic soil stress in the ground induced by aircraft loads can lead to excessive and differential settlements. The effect of aircraft speeds on the dynamic stress is complicated due to runway roughness, lift force and wave propagation. In this paper, a virtual prototype model of B777-300 was initially developed to investigate the aircraft loads impacted by runway roughness and lift force. Subsequently, a finite element model of the runway was established for the dynamic stress in the ground subjected to moving aircraft loads. Results show that as aircraft speed increases, the aircraft-load-induced dynamic stress in the ground first increases and then decreases. The critical speed of dynamic stress accompanied with a peak stress varies with soil depth. In the shallow soil layers, dynamic stress in the ground is mainly affected by runway roughness and lift force. The critical speed of dynamic stress is close to the sensitive speed corresponding to peak aircraft loads. With the increase of soil depth and aircraft speed, the effect of dynamic amplification due to wave propagation becomes more pronounced. In the deep soil layers, the critical speed of dynamic stress approaches the Rayleigh wave velocity of soils, especially when soft soil layers exist. [ABSTRACT FROM AUTHOR]

Airport runway roughness can be characterised by power spectral density (PSD) and two spectrum parameters, namely, the unevenness index and waviness. In order to find suitable spectrum parameters for airport runway roughness, seven runway profiles in China were measured to expand the current database of runway profiles. The statistical distributions of the spectrum parameters for runway roughness then were calculated, and the effects of the spectrum parameters on aircraft vibrations were analysed. The results show that the mode of the unevenness index is 0.13, which is a little lower than that of an A-level road, and the mode of waviness is 2.2, which is higher than the waviness recommended in ISO road classification. Moreover, as the unevenness index and the waviness increase, the aircraft vibrations become more severe. The aircraft vibration responses can be represented as a function of waviness, unevenness index, and speed, with a high correlation. At a constant speed, the relationship between the threshold values of the unevenness index and waviness can be shown as a straight line in a log plot. Finally, taking 200 km/h as the representative speed, threshold curves of the spectrum parameters, which are based on ride comfort levels and statistical analysis are proposed for the the simulation of aircraft vibration. [ABSTRACT FROM AUTHOR]

This study was undertaken to develop a new index, the Main Landing Gear Cumulative Stroke (MLGCS) index, to evaluate airport runway roughness. Using ADAMS/Aircraft software, we first developed and validated a virtual prototype model of the Boeing B737-800 aircraft and then employed the model to predict the aircraft's dynamic responses with regard to roughness. Using this prototype model and comparing it to the International Roughness Index (IRI) that is designed to evaluate roadway roughness, we established a landing gear cumulative stroke (LGCS) model to represent runway roughness. The results show that taxiing speed is an important factor using the LGCS model. According to the most unfavorable scenario, we determined the LGCS of the nose landing gear to be 100 km/h and that of the main landing gear to be 60 km/h. These results underscore that, based on correlation analysis, using the cumulative stroke of the main landing gear is more reasonable than using that of the nose landing gear to evaluate runway roughness. Furthermore, based on measured data for 37 runways, a comparison of commonly used roughness indices indicates that the MLGCS index proposed in this paper is superior to both the Boeing Bump Index and the IRI. [ABSTRACT FROM AUTHOR]

Pavement evaluation is critical for the decision-making process of pavement preservation and rehabilitation. Roughness is a key airport pavement characteristic that has been linked to impacts such as safety and service life. The Boeing Bump is one of the few roughness evaluation methods that has been developed specifically for runways. Although it is superior to the widely used International Roughness Index (IRI), it does not take into account the superposition effect of continuous runway bumps. Based on the ADAMS/Aircraft virtual prototype platform, this paper establishes and verifies five typical models (B737, B747, B757, B777, and B787) and then analyzes the most unfavorable speed (in terms of aircraft vibration) of each model and the dynamic responses caused by multiple bumps. The original Boeing Bump is improved and optimized by determining dynamic response thresholds for the various aircraft types. The results show that the revised Boeing Bump is more realistic than the original version, especially with regard to medium and long wave bands. [ABSTRACT FROM AUTHOR]

Runway roughness is one of the most critical performance factors for runway evaluation, which directly impacts airport operation safety and pavement preservation cost. Properly evaluated runway roughness could optimize the decision-making process for runway preservation and therefore reduce the life cycle cost of the runway pavement asset. In this paper, the excitation effect of runway roughness is analyzed using a coupled aircraft/runway system. The coupled system is composed of a two degrees-of-freedom (2-DOF) aircraft model and a typical asphalt runway structure model established under runway roughness random excitation in this work. The dynamic differential equations for the coupled system are derived based on D'Alembert's principle. The system's vibration responses are determined via the pseudo excitation method and three response laws, i.e., the center of gravity acceleration (CGA), the dynamic load coefficient (DLC) of the landing gear, and the runway structural displacement, which are investigated under different modes. The results show that the first-order mode of the runway structure, vertical deformation, is the most significant of the four modes. Moreover, uneven excitation has a significant effect on the distribution of the aircraft's vibration response. Compared with a single aircraft system, the developed coupled aircraft/runway system has different dynamic responses, and the degree of difference depends on the taxiing speed. The coupled effect on the CGA increases significantly with an increase in speed, with up to a 7.3% percentage difference. The coupled effect on the DLC first increases and then decreases as the aircraft speed increases, reaching a maximum of about 6% percentage difference at 120 km/h. [ABSTRACT FROM AUTHOR]