Search

Purpose: To quantify cellular senescence in supraspinatus tendon and subacromial bursa of humans with rotator cuff tears and to investigate the in vitro efficacy of the senolytic dasatinib + quercetin (D+Q) to eliminate senescent cells and alter tenogenic differentiation., Methods: Tissue was harvested from 41 patients (mean age, 62 years) undergoing arthroscopic rotator cuff repairs. In part 1 (n = 35), senescence was quantified using immunohistochemistry and gene expression for senescent cell markers (p16 and p21) and the senescence-associated secretory phenotype (SASP) (interleukin [IL] 6, IL-8, matrix metalloproteinase [MMP] 3, monocyte chemoattractant protein [MCP] 1). Senescence was compared between patients <60 and ≥60 years old. In part 2 (n = 6) , an in vitro model of rotator cuff tears was treated with D+Q or control. D+Q, a chemotherapeutic and plant flavanol, respectively, kill senescent cells. Gene expression analysis assessed the ability of D+Q to kill senescent cells and alter markers of tenogenic differentiation., Results: Part 1 revealed an age-dependent significant increase in the relative expression of p21, IL-6, and IL-8 in tendon and p21, p16, IL-6, IL-8, and MMP-3 in bursa (P < .05). A significant increase was seen in immunohistochemical staining of bursa p21 (P = .028). In part 2, D+Q significantly decreased expression of p21, IL-6, and IL-8 in tendon and p21 and IL-8 in bursa (P < .05). Enzyme-linked immunosorbent assay analysis showed decreased release of the SASP (IL-6, MMP-3, MCP-1; P = .002, P = .024, P < .001, respectively). Tendon (P = .022) and bursa (P = .027) treated with D+Q increased the expression of COL1A1., Conclusions: While there was an age-dependent increase in markers of cellular senescence, this relationship was not consistently seen across all markers and tissues. Dasatinib + quercetin had moderate efficacy in decreasing senescence in these tissues and increasing COL1A1 expression., Clinical Relevance: This study reveals that cellular senescence may be a therapeutic target to alter the biological aging of rotator cuffs and identifies D+Q as a potential therapy., (Copyright © 2023 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To evaluate the effect of an irreparable posterosuperior rotator cuff tear (PSRCT) on glenohumeral joint loads and to quantify improvement after superior capsular reconstruction (SCR) using an acellular dermal allograft., Methods: Ten fresh-frozen cadaveric shoulders were tested using a validated dynamic shoulder simulator. A pressure mapping sensor was placed between the humeral head and glenoid surface. Each specimen underwent the following conditions: (1) native, (2) irreparable PSRCT, and (3) SCR using a 3-mm-thick acellular dermal allograft. Glenohumeral abduction angle (gAA) and superior humeral head migration (SM) were measured using 3-dimensional motion-tracking software. Cumulative deltoid force (cDF) and glenohumeral contact mechanics, including glenohumeral contact area and glenohumeral contact pressure (gCP), were assessed at rest, 15°, 30°, 45°, and maximum angle of glenohumeral abduction., Results: The PSRCT resulted in a significant decrease of gAA along with an increase in SM, cDF, and gCP (P < .001, respectively). SCR did not restore native gAA (P < .001); however, SM was significantly reduced (P < .001). Further, SCR significantly reduced deltoid forces at 30° (P = .007) and 45° of abduction (P = .007) when compared with the PSRCT. SCR did not restore native cDF at 30° (P = .015), 45° (P < .001), and maximum angle (P < .001) of glenohumeral abduction. Compared with the PSRCT, SCR resulted in a significant decrease of gCP at 15° (P = .008), 30° (P = .002), and 45° (P = .006). However, SCR did not completely restore native gCP at 45° (P = .038) and maximum abduction angle (P = .014)., Conclusions: In this dynamic shoulder model, SCR only partially restored native glenohumeral joint loads. However, SCR significantly decreased glenohumeral contact pressure, cumulative deltoid forces, and superior migration, while increasing abduction motion, when compared with the posterosuperior rotator cuff tear., Clinical Relevance: These observations raise concerns regarding the true joint-preserving potential of SCR for an irreparable posterosuperior rotator cuff tear, along with its ability to delay progression of cuff tear arthropathy and eventual conversion to reverse shoulder arthroplasty., (Copyright © 2023 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: Lower trapezius transfer (LTT) has been proposed for restoring the anteroposterior muscular force couple in the setting of an irreparable posterosuperior rotator cuff tear (PSRCT). Adequate graft tensioning during surgery may be a factor critical for sufficient restoration of shoulder kinematics and functional improvement., Purpose/hypothesis: The purpose was to evaluate the effect of tensioning during LTT on glenohumeral kinematics using a dynamic shoulder model. It was hypothesized that LTT, while maintaining physiological tension on the lower trapezius muscle, would improve glenohumeral kinematics more effectively than undertensioned or overtensioned LTT., Study Design: Controlled laboratory study., Methods: A total of 10 fresh-frozen cadaveric shoulders were tested using a validated shoulder simulator. Glenohumeral abduction angle, superior migration of the humeral head, and cumulative deltoid force were compared across 5 conditions: (1) native, (2) irreparable PSRCT, (3) LTT with a 12-N load (undertensioned), (4) LTT with a 24-N load (physiologically tensioned according to the cross-sectional area ratio of the lower trapezius muscle), and (5) LTT with a 36-N load (overtensioned). Glenohumeral abduction angle and superior migration of the humeral head were measured using 3-dimensional motion tracking. Cumulative deltoid force was recorded in real time throughout dynamic abduction motion by load cells connected to actuators., Results: Physiologically tensioned (Δ13.1°), undertensioned (Δ7.3°), and overtensioned (Δ9.9°) LTT each significantly increased the glenohumeral abduction angle compared with the irreparable PSRCT ( P < .001 for all). Physiologically tensioned LTT achieved a significantly greater glenohumeral abduction angle than undertensioned LTT (Δ5.9°; P < .001) or overtensioned LTT (Δ3.2°; P = .038). Superior migration of the humeral head was significantly decreased with LTT compared with the PSRCT, regardless of tensioning. Physiologically tensioned LTT resulted in significantly less superior migration of the humeral head compared with undertensioned LTT (Δ5.3 mm; P = .004). A significant decrease in cumulative deltoid force was only observed with physiologically tensioned LTT compared with the PSRCT (Δ-19.2 N; P = .044). However, compared with the native state, LTT did not completely restore glenohumeral kinematics, regardless of tensioning., Conclusion: LTT was most effective in improving glenohumeral kinematics after an irreparable PSRCT when maintaining physiological tension on the lower trapezius muscle at time zero. However, LTT did not completely restore native glenohumeral kinematics, regardless of tensioning., Clinical Relevance: Tensioning during LTT for an irreparable PSRCT may be important to sufficiently improve glenohumeral kinematics and may be an intraoperatively modifiable key variable to ensure postoperative functional success.

Background: In the setting of irreparable posterosuperior rotator cuff tears (PSRCTs), lower trapezius transfer (LTT) may be anatomically better positioned for restoring the muscular force couple compared with latissimus dorsi transfer (LDT). The purpose of the study was to evaluate the effect of LTT and LDT on glenohumeral kinematics using a dynamic shoulder model., Methods: Ten fresh-frozen cadaveric shoulders (mean age: 56.5 ± 17.2 years) were tested using a dynamic shoulder simulator. The maximum abduction angle (MAA), superior humeral head migration (SHM), and cumulative deltoid forces (CDFs) were compared across 4 conditions: (1) native; (2) irreparable PSRCT; (3) LTT using an Achilles tendon allograft; and (4) LDT. MAA and SHM were measured using 3-dimensional motion tracking. CDF was recorded in real time throughout the dynamic abduction motion by load cells connected to actuators., Results: Compared to the native state, the PSRCT resulted in a significant decrease (Δ-24.1°; P < .001) in MAA, with a subsequent significant increase after LTT (Δ13.1°; P < .001) and LDT (Δ8.9°; P < .001). LTT achieved a significantly greater MAA than LDT (Δ4.2°; P = .004). Regarding SHM, both LTT (Δ-9.4 mm; P < .001) and LDT (Δ-5.0 mm; P = .008) demonstrated a significant decrease compared with the PSRCT state. LTT also achieved significantly less SHM compared with the LDT (Δ-4.4 mm; P = .011). Further, only the LTT resulted in a significant decrease in CDF compared with the PSRCT state (Δ-21.3 N; P = .048), whereas LTT and LDT showed similar CDF (Δ-11.3 N; P = .346). However, no technique was able to restore the MAA, SHM, and CDF of the native shoulder (P < .001, respectively)., Conclusion: LTT and LDT both achieved a significant increase in MAA along with significantly less SHM compared with the PSRCT state. Although LTT required significantly less compensatory deltoid forces compared with the PSRCT state, this was not observed for the LDT. Further, the LTT prevented loss of abduction motion and SHM more sufficiently. In the challenging treatment of irreparable PSRCTs, LTT may restore native glenohumeral kinematics more sufficiently, potentially leading to improved postoperative functional outcomes., (Copyright © 2022 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: It has been shown that subacromial bursa (SAB) harbors connective tissue progenitor cells. The purpose of this study was to evaluate the effects of implantation of SAB-derived cells (SBCs) suspended in a fibrin sealant bead and implantation of SAB tissue at rotator cuff repair site on biomechanical properties of the repair in a mouse (C57Bl/6) model of supraspinatus tendon (ST) detachment and repair., Methods: Part 1: Murine SAB tissue was harvested and cultured. Viability of SBCs suspended in 10 μL of fibrin sealant beads was confirmed in vitro and in vivo. Eighty mice underwent right ST detachment and repair augmented with either fibrin sealant bead (control group) or fibrin sealant bead with 100,000 SBCs (study group) applied at the repair site. Part 2: 120 mice underwent right ST detachment and repair and were randomized equally into 4 groups: (1) a tissue group, which received a piece of freshly harvested SAB tissue; (2) a cell group, which received SBCs suspended in fibrin sealant bead; (3) a fibrin sealant group, which received plain fibrin sealant bead without cells; and (4) a control group, which received nothing at the ST repair site. An equal number of mice in each group were killed at 2 and 4 weeks. Specimens underwent biomechanical testing to evaluate failure force (part 1 and 2) and histologic analysis of the repair site (part 1 only)., Results: Part 1: The mean failure force in the study group was significantly higher than controls at 2 and 4 weeks (3.25 ± 1.03 N vs. 2.43 ± 0.56 N, P = .01, and 4.08 ± 0.99 N vs. 3.02 ± 0.8 N, P = .004, respectively). Mean cell density of the ST at the repair site was significantly lower in the study group at 2 weeks than in controls (18,292.13 ± 1706.41 vs. 29,501.90 ± 3627.49, P = .001). Study group specimens had lower proteoglycan contents than controls, but this difference was not statistically significant. Part 2: There was no difference in failure force between cell and tissue groups at the 2- and 4-week time points (P = .994 and P = .603, respectively). There was no difference in failure force between fibrin sealant bead and control groups at the 2- and 4-week time points (P = .978 and P = .752, respectively)., Conclusion: This study shows that the application of SBCs and SAB tissue at the rotator cuff repair site increases the strength of repair in a murine model of rotator cuff detachment and repair., (Copyright © 2022. Published by Elsevier Inc.)

Failed rotator cuff repairs present a complex issue for treating surgeons. Many methods of management exist for this pathology including revision repair with biologic augmentation, repairs with allograft, tendon transfers, superior capsular reconstruction, balloon arthroplasty, bursal acromial reconstruction, and reverse total shoulder arthroplasty. This review discusses the current literature associated with these management options., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: Superior capsular reconstruction (SCR) can be used for massive irreparable rotator cuff tears in the absence of significant degenerative changes; however, those who fail an SCR may require reverse shoulder arthroplasty (RSA). The effect of a previously performed SCR on outcomes following RSA remains unknown., Methods: Subjects who underwent RSA from May 2015 to January 2021 at 2 separate institutions were retrospectively identified through prospectively collected databases. Patients who underwent RSA after failed SCR were matched to those who underwent RSA after failed rotator cuff repair (RCR) based on the number of previous ipsilateral shoulder procedures (n = 1, 2, ≥3) and secondarily by age within 5 years. American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score, Single Assessment Numeric Evaluation (SANE), visual analog scale (VAS) for pain, and Western Ontario Osteoarthritis of the Shoulder index (WOOS) scores were compared between groups. The minimal clinically important difference (MCID), substantial clinical benefit (SCB), and patient acceptable symptomatic state (PASS) thresholds were calculated to determine clinically relevant differences between groups., Results: Forty-five patients were included (32 RSA following RCR, 13 following SCR). There were more smokers (P = .001) and worker's compensation cases (P = .034) in the SCR group. The RCR cohort was older (P = .007) and had a greater incidence of mental health (P > .999) and somatic disorders (P = .698), although these did not reach statistical significance. The mean follow-up for the RCR and SCR groups were 24.2 ± 23.3 and 20.4 ± 14.9 months following RSA, respectively (P = .913). The time from index RCR or SCR to RSA were 94.4 ± 22.2 and 89.2 ± 5.3 months, respectively (P = .003). Pre- and postoperative range of motion were similar between groups, as was the overall change in forward flexion (P = .879), abduction (P = .971), and external rotation (P = .968) following RSA. The RCR group had lower postoperative VAS pain (P = .009), higher SANE (P = .015), higher ASES (P = .008), and higher WOOS (P = .018) scores. The percentage achieving the MCID (P = .676) and SCB (P > .999) were similar; however, 56.7% of the RCR group met the SANE PASS threshold compared with 0.0% in the SCR group (P = .005). There were no differences in postoperative complications (P = .698) or revision rates (P = .308) following RSA between cohorts., Conclusion: When matched for number of previous procedures to the ipsilateral extremity and age, patients who underwent RSA following failed SCR had worse clinical outcome scores than their RSA following failed RCR counterparts. No patient in the SCR group met the SANE PASS threshold, whereas more than half of the RCR group did., (Published by Elsevier Inc.)

Purpose: To evaluate the effect of an isolated full-thickness supraspinatus (SSP) tear on glenohumeral kinematics and contact mechanics, as well as to quantify improvement following rotator cuff repair (RCR)., Methods: Ten fresh-frozen cadaveric shoulders (mean age: 63.1 ± 4.6 years) were tested using a dynamic shoulder simulator. A pressure-mapping sensor was placed between the humeral head and the glenoid. Each specimen underwent the following three conditions: 1) native, 2) isolated full-thickness SSP tear, and 3) RCR. Maximum abduction angle (MAA) and superior humeral head migration (SHM) were measured using 3D motion tracking software. Cumulative deltoid force (CDF) and glenohumeral contact mechanics, including contact area (GCA) and contact pressure (GCP), were assessed at the resting position, as well as at 15°, 30°, 45°, and 60° of glenohumeral abduction., Results: Compared to native, the SSP tear resulted in a significant decrease in MAA (Δ-8.3°; P < .001) along with a SHM of 6.4 ± 3.8 mm, while significantly increasing CDF (Δ20.5 N; P = .008), GCP (Δ63.1 kPa; P < .001), and peak GCP (Δ278.6 kPa; P < .001), as well as decreasing GCA (Δ-45.8 mm 2 ; P < .001) at each degree of abduction. RCR reduced SHM to 1.2 ± 2.5 mm, while restoring native MAA, CDF (Δ1.8 N), GCA (Δ4.5 mm 2 ), GCP (Δ-4.5 kPa) and peak GCP (Δ19.9 kPa) at each degree of abduction (P > .999, respectively)., Conclusion: In a dynamic biomechanical cadaveric model, increased glenohumeral joint loads due to a full-thickness SSP tear can be reversed with RCR. More specifically, RCR restored native glenohumeral contact area and contact pressure, while preventing superior humeral head migration and decreasing compensatory deltoid forces., Clinical Relevance: These time 0 observations indicate that undergoing rotator cuff repair may prevent the development of degenerative changes by significantly reducing glenohumeral joint loads and ensuring sufficiently stable joint kinematics., (Copyright © 2021 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose/aim: The purpose of this study is to identify a cell population within the murine subcromial bursal-derived cells with characteristics compatible to an accepted mesenchymal stem cell description given by the International Society for Cellular Therapy (ISCT)., Materials and Methods: Murine subacromial bursa was harvested using microsurgical technique. Subacromial bursal-derived cells were classified through colony-forming units, microscopic morphology, fluorescent-activated cell sorting, and differentiation into chondrogenic, adipogenic, and osteogenic lineages., Results: Subacromial bursal samples exhibited cell growth out of the tissue for an average of 115 ± 29 colony-forming units per 1 mL of complete media. Subacromial bursal-derived cells exhibited a long, spindle-shaped, fibroblast-like morphology. Subacromial bursal-derived cells positively expressed mesenchymal stem cell markers CD73, CD90, and CD105, and negatively expressed mesenchymal stem cell markers CD31 and CD45. Subacromial bursal-derived cells, examined by Image J analysis and quantitative gene expression, were found to differentiate into chondrogenic, adipogenic, and osteogenic lineages., Conclusions: This study demonstrated the feasibility of harvesting murine subacromial bursal tissue and identified a cell population within the subacromial bursa with characteristics compatible to an accepted mesenchymal stem cell description. The results of this study suggest that the mouse subacromial bursal-derived cell population harbors mesenchymal stem cells. Murine subacromial bursal tissue is a potential source for obtaining cells with mesenchymal stem cell characteristics for future utilization in orthopedic research to look into treatment of rotator cuff pathology.

Purpose: To build upon previous literature to identify a complete analysis of cellular contents of subacromial bursal tissue as well as the matrix surrounding the rotator cuff., Methods: Samples of subacromial bursal tissue and surrounding matrix milieu from above the rotator cuff tendon and above the rotator cuff muscle bellies were obtained from 10 patients undergoing arthroscopic rotator cuff repair. Samples were analyzed using fluorescent-activated cell sorting and histologic analysis with staining protocols (Oil Red O, Alcian Blue, and Picro-Sirius Red), for identification of matrix components, including fat, proteoglycans, and collagen., Results: Progenitor cells and fibroblast-type cells were present in significant amounts in subacromial bursal tissue in both tissues obtained from over the tendinous and muscle belly portions. Markers for neural tissue, myeloid cells, and megakaryocytes also were present to a lesser extent. There were prominent amounts of fat and proteoglycans present in the matrix, based on ImageJ analysis of stained histologic slides., Conclusions: The subacromial bursal tissue and surrounding matrix of patients undergoing rotator cuff repair contains progenitor cells in significant concentrations both over the tendon and muscle belly of the rotator cuff., Clinical Relevance: This presence of progenitor cells, in particular, in the subacromial bursal tissue provides a potential basis for future applications of augmentation purposes in rotator cuff healing, and calls into question the practice of routine bursectomy. As the potential role of bursal tissue contents in growth and regeneration in the setting of rotator cuff healing is more well understood, maintaining this tissue may become more relevant. Concentration of these cellular components for use in autologous re-implantation is also an avenue of interest., (Copyright © 2021 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To investigate the effect of bursal acromial reconstruction (BAR) using an acellular dermal allograft on glenohumeral joint kinematics including maximum abduction angle, glenohumeral superior translation, cumulative deltoid force, and subacromial contact pressure., Methods: In this dynamic biomechanical cadaveric shoulder study, 8 fresh-frozen cadaveric shoulders (age 53.4 ± 14.2 years, mean ± standard deviation) were tested using a dynamic shoulder testing system. Maximum abduction angle (MAA), glenohumeral superior translation (ghST), maximum cumulative deltoid force (cDF), and subacromial peak contact pressure (sCP) were compared across 3 conditions: (1) intact shoulder; (2) massive retracted irreparable posterosuperior rotator cuff tear (psRCT) according to Patte III; and (3) BAR. Additionally, humeral head containment was measured using contact pressure., Results: Compared with the simulated psRCT, BAR significantly increased mean MAA and significantly decreased ghST (P < .001, respectively) and cDF (P = .017) Additionally, BAR was found to significantly decrease sCP compared with psRCT (P = .024)., Conclusion: In a dynamic biomechanical cadaveric shoulder simulator, resurfacing the undersurface of the acromion using the BAR technique leads to significantly improved ghST, MAA, cDF, and sCP compared with the irreparable rotator cuff tear., Clinical Relevance: With the BAR technique, native humeral containment may be restored, which can potentially delay progressive subacromial and glenoidal abrasive wear and improve overall shoulder function. As such, the proposed BAR technique can be considered as a technically feasible and potentially cost- and timesaving procedure, as no bone anchors are needed, glenoidal or humeral side graft ruptures can be avoided, and postoperative rehabilitation can be started immediately. However, future clinical studies are needed., (Copyright © 2021 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Objective: The purpose of this guide is to illustrate an arthroscopic rotator cuff repair (RCR) with two techniques for biologically enhanced patch augmentation., Indications: Massive rotator cuff tears (> 5 cm) and revision RCR., Contraindications: Active joint or systemic infection; severe fatty muscle atrophy; severe glenohumeral arthropathy; American Society of Anesthesiologists Physical Status (ASA PS) IV., Surgical Technique: Dermal allograft patch augmented with concentrated bone marrow aspirate (cBMA), platelet-rich plasma (PRP) and platelet-poor plasma (PPP); or Regeneten patch augmented with bursa, PRP, PPP, and autologous thrombin., Postoperative Management: A 30° abduction sling for 6 weeks; unrestricted active-assisted external rotation and forward elevation after 12 weeks; focus on restoration of scapular stability and strength., Results: A total of 22 patients received revision massive RCR using a dermal allograft patch enhanced with cBMA and PRP with a mean follow-up of 2.5 years (1.0-5.8 years). There was a significant improvement in the preoperative Simple Shoulder Test (SST). There was also a trend towards improved pain and American Shoulder and Elbow Surgeons (ASES) Shoulder Score. In this cohort, 45% reached the minimal clinically important difference (MCID), 41% achieved substantial clinical benefit (SCB), and 32% had a patient-acceptable symptomatic state (PASS) for the ASES score. Preliminary data using the Regeneten patch technique with bursa, PRP, PPP, and autologous thrombin was prospectively collected in five patients between 05/2020 and 03/2021 at the author's institution. Mean follow-up was 6.5 ± 1.3 (6-8 months). There was an improvement from preop to postop in pain, ASES, SANE, Constant-Murley (CM) score and active range of motion., (© 2021. The Author(s), under exclusive licence to Springer Medizin Verlag GmbH, ein Teil von Springer Nature.)

Purpose: To evaluate whether nucleated cell count (NCC) could serve as an approximation for the number of colony-forming units (CFUs) in concentrated bone marrow aspirate (cBMA) obtained from the proximal humerus., Methods: Bone marrow aspirate (BMA) was harvested from the proximal humerus in 96 patients (mean age 56.2 ± 7.0 years) during arthroscopic rotator cuff repair. Following concentration of the aspirate, nucleated cells of each sample were counted. The total number of CFUs was evaluated under the microscope at their first appearance, usually after 5 to 10 days in culture. Fluorescence-activated cell sorting analysis and assays for osteogenic, adipogenic, and chondrogenic differentiation were performed. Linear regression was assessed to predict the number of CFUs by using NCC. Age, sex, and body mass index (BMI) were evaluated as independent variables., Results: The average volume of the obtained BMA was 86.7 ± 35.2 mL. The cBMA contained a mean of 26.3 ± 6.8 × 10 6 nucleated cells per mL, which yielded a mean of 1421.7 ± 802.7 CFUs in cell culture. There were no significant differences in NCC or number of CFUs when sex, volume of BMA, age, or BMI was examined independently (P >.05, respectively). Linear regression found that NCC was of limited predictive value for the total number of CFUs being yielded after cell culture (r 2  = 0.28 with a root mean square error of 679.4)., Conclusion: NCC was of negligible predictive value for the total number of CFUs for connective tissue progenitor cells in BMA harvested from the proximal humerus during arthroscopic rotator cuff repair., Clinical Relevance: NCC is often used to assess the quality of cBMA samples for biological augmentation during surgery. The limited predictive value of this measurement tool is of clinical importance, because effectiveness of BMA applications has been suggested to depend on the concentration of progenitor cells within the sample., (Copyright © 2021 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: The role of subacromial bursa in rotator cuff pathology is unclear. Along with recognized inflammatory potential, current data demonstrate the presence of mesenchymal stem cells and potential regenerative properties of the bursa. The purpose of this study was to (1) approximate an in vitro co-culture model that represents interaction between torn rotator cuff tendon and subacromial bursa, (2) quantify the cellular activity of tendon and bursa and their interactions, (3) use this model to induce a state of inflammation present with rotator cuff pathology., Methods: In part 1, tendon and bursa samples were obtained from 6 patients undergoing rotator cuff repair. Tendon and bursa were cultured alone and together in co-culture wells for 21 days. Markers specific for tenocyte gene expression (tenascin C, decorin, etc) were measured in both tendon and bursa alone and compared to co-culture models. In part 2 of the study, an inflammatory state was induced with interleukin-1β treatment, and markers of inflammation were measured via protein assay at 0 and 21 days in samples from 7 additional patients., Results: There was an increase in tendon and bursa markers in nearly all groups as evidenced by increased gene expression of known tendon and bursa markers. There was a significant increase in gene expression when torn tendon was co-cultured with bursa compared with culturing alone. Additionally, a state of inflammation was induced as evidenced by increased markers of inflammation, inflammatory protein concentration, and inflammatory cells and disruption of histologic morphology., Conclusion: There is a clear interaction between rotator cuff tendon and the milieu produced by the subacromial bursa in this in vitro co-culture system that is significantly different when compared to an isolated culture of tendon and bursa. This system was successfully used to induce a state of inflammation that may represent in vivo inflammation. This in vitro model of rotator cuff pathology can aid investigators in testing effects of agents proposed to improve rotator cuff healing. This can lead to further knowledge regarding effective treatment options., (Copyright © 2020 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: In the past decade, superior capsular reconstruction has emerged as a potential surgical approach in young patients with irreparable posterosuperior rotator cuff tears (RCT) and absence of severe degenerative changes. Recently, the use of locally available and biological viable autografts, such as the long head of the biceps tendon (LHBT) for SCR has emerged, with promising early results., Purpose/hypothesis: The purpose of this study was to investigate the effect of using the LHBT for reconstruction of the superior capsule on shoulder kinematics, along with different fixation constructs in a dynamic biomechanical model. The authors hypothesized that each of the 3 proposed fixation techniques would restore native joint kinematics, including glenohumeral superior translation (ghST), maximum abduction angle (MAA), maximum cumulative deltoid force (cDF), and subacromial peak contact pressure (sCP)., Study Design: Controlled laboratory study., Methods: Eight fresh-frozen cadaveric shoulders (mean age, 53.4 ± 14.2 years) were tested using a dynamic shoulder simulator. Each specimen underwent the following 5 conditions: (1) intact, (2) irreparable posterosuperior rotator cuff tear (psRCT), (3) V-shaped LHBT reconstruction, (4) box-shaped LHBT reconstruction, and (5) single-stranded LHBT reconstruction. MAA, ghST, cDF and sCP were assessed in each tested condition., Results: Each of the 3 LHBT techniques for reconstruction of the superior capsule significantly increased MAA while significantly decreasing ghST and cDF compared with the psRCT ( P < .001 and P < .001, respectively). Additionally, the V-shaped and box-shaped techniques significantly decreased sCP ( P = .009 and P = .016, respectively) compared with the psRCT. The V-shaped technique further showed a significantly increased MAA ( P < .001, respectively) and decreased cDF ( P = .042 and P = .039, respectively) when compared with the box-shaped and single-stranded techniques, as well as a significantly decreased ghST ( P = .027) when compared with the box-shaped technique., Conclusion: In a dynamic biomechanical cadaveric model, using the LHBT for reconstruction of the superior capsule improved shoulder function by preventing superior humeral migration, decreasing deltoid forces and sCP. As such, the development of rotator cuff tear arthropathy in patients with irreparable psRCTs could potentially be delayed., Clinical Relevance: Using a biologically viable and locally available LHBT autograft is a cost-effective, potentially time-saving, and technically feasible alternative for reconstruction of the superior capsule, which may result in favorable outcomes in irreparable psRCTs. Moreover, each of the 3 techniques restored native shoulder biomechanics, which may help improve shoulder function by preventing superior humeral head migration and the development of rotator cuff tear arthropathy in young patients with irreparable rotator cuff tears.

Purpose: To investigate the influence of patient demographics and rotator cuff tear characteristics on the cellular proliferation potential of subacromial bursa-derived cells (SBDCs)., Methods: Patients undergoing arthroscopic rotator cuff repair between December 2017 and February 2019 were considered for enrollment in the study. Basic demographic information as well as medical and surgical history were obtained for each patient. Subacromial bursa was harvested from over the rotator cuff tendon. Cellular proliferation was evaluated after 3 weeks of incubation by counting nucleated SBDCs. Fluorescence-activated cell sorting (FACS) analysis was performed to confirm the presence of mesenchymal stem cell (MSC) specific surface markers. Using preoperative radiographs and magnetic resonance imaging (MRI), acromiohumeral distance (AHD), severity of cuff tear arthropathy, and rotator cuff tear characteristics were evaluated., Results: Seventy-three patients (mean age: 57.2 ± 8.5 years) were included in the study. There was no significant difference in cellular proliferation of SBDCs when evaluating the influence of age, sex, body mass index (BMI), smoking status, and presence of systemic comorbidities (p > .05, respectively). Similarly, there was no significant difference in cellular proliferation of SBDCs when looking at rotator cuff tear characteristics (size, tendon retraction, fatty infiltration, muscle atrophy), AHD, or severity of cuff tear arthropathy (p > .05). FACS analysis confirmed nucleated SBDCs to have a high positive rate of MSC specific surface markers., Conclusion: Subacromial bursa consistently demonstrated a high cellular proliferation potential regardless of patient demographics, rotator cuff tear characteristics, and severity of glenohumeral joint degeneration., Clinical Relevance: These findings may alleviate concerns that subacromial bursa might lose cellular proliferation potential when being used for biologic augmentation in massive and degenerated rotator cuff tears, thus assisting in predicting tendon healing and facilitating surgical decision-making., (Copyright © 2020 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To evaluate the clinical outcomes of patients who underwent biologically enhanced patch augmentation repair for the treatment of revision massive rotator cuff tears., Methods: Twenty-two patients who underwent arthroscopic and mini-open rotator cuff repair using a patch augmented with platelet-rich plasma and concentrated bone marrow aspirate (cBMA) for revision massive (≥2 tendons) rotator cuff tears from 2009 to 2014, with a minimum 1-year follow-up, were included in the study. In this procedure the medial side of the graft is secured to the rotator cuff tendon remaining medially. American Shoulder and Elbow Surgeons (ASES), Simple Shoulder Test, and postoperative Single Assessment Numerical Evaluation scores were evaluated. To determine the clinical relevance of ASES scores, the minimal clinically important difference, substantial clinical benefit (SCB), and the patient-acceptable symptomatic state (PASS) thresholds were used. Clinical success or failure was defined based on whether the patient reached the SCB threshold. In the laboratory, cellular counting along with the concentration of connective tissue progenitor cells were performed on patch samples from the day of surgery. Scaffolds were processed histologically at days 0, 7,14, and 21 of culture., Results: Patients had significant improvement in the Simple Shoulder Test (2.6 ± 3.0 pre vs 5.2 ± 4.2 post , P = .01), whereas improvement in pain scores was found to be nonsignificant (5.6 ± 2.5 pre vs 4.2 ± 3.4 post, P = .11) at final follow-up. Mean ASES improved by Δ14.6 ± 33.4 points; however, this did not reach statistical significance (40.2 ± 21.6 pre vs 53.9 ± 31.4 post, P = .10). With regards to ASES score, 45% of patients achieved the minimal clinically important difference, 41% the SCB, and 32% reached or exceeded the PASS criteria. At 21 days, there was a significantly greater cell count in scaffolds from patients who had clinical success than those who were failures (P = .02)., Conclusions: Only 41% of patients undergoing biologically enhanced patch augmentation repair reached substantial clinical benefit, whereas 32% reached or exceeded the PASS criteria., Level of Evidence: Case Series: Level IV., (Copyright © 2020 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To biomechanically compare the effect of superior capsule reconstruction (SCR) using a 3- and 6-mm thick acellular dermal allograft for the treatment of irreparable rotator cuff tears., Methods: Eight fresh-frozen cadaveric shoulders were tested using a dynamic shoulder model. Maximum abduction angle (MAA), glenohumeral superior translation (ghST), subacromial peak contact pressure (sPCP), and cumulative deltoid force (cDF) were compared among 4 conditions: (1) intact shoulder, (2) simulated irreparable rotator cuff tear (RCT), (3) SCR using a 3-mm-thick acellular dermal allograft, (4) SCR using a 6-mm-thick acellular dermal allograft., Results: Compared with the intact state, simulated irreparable RCTs significantly decreased MAA (P < .001), while significantly increasing ghST (P = .001), sPCP (P < .001), and cDF (P < .001). SCR with a 3-mm-thick graft significantly increased MAA (P = .01) and decreased ghST (P = .01) compared with the RCT state, however, showed similar sPCP and cDF. Compared with the torn state, SCR with a 6-mm-thick graft significantly increased MAA (P < .001) and significantly decreased ghST (P < .001), sPCP (P < .001), and cDF (P = .001). Using a 6-mm-thick graft demonstrated similar MAA, ghST, sPCP, and cDF compared with the intact state. When comparing the 3-mm to the 6-mm thick graft, significant differences were found in ghST (P = .03), sPCP (P < .001), and cDF (P = .02)., Conclusions: SCR with a 6-mm-thick acellular dermal allograft better restored normal glenohumeral joint position and forces compared with a 3-mm-thick graft for the treatment of irreparable RCTs., Clinical Relevance: Graft thickness may affect the clinical success following SCR with commercially available dermal allografts. Using a thicker (>3 mm) graft was able to biomechanically better restore native glenohumeral joint properties., (Copyright © 2019 Arthroscopy Association of North America. All rights reserved.)

Purpose: To evaluate the clinical success rate, along with risk factors for failure, in patients undergoing latissimus dorsi transfer for the treatment of massive, irreparable, previously failed rotator cuff tears., Methods: We performed a retrospective chart review of prospectively collected data from an institutional shoulder outcome registry. All patients who underwent latissimus dorsi transfer for previously failed rotator cuff repair between 2006 and 2013 with a minimum follow-up period of 1 year were included in the study. The indications for inclusion were large (≥2 tendons), retracted, chronic rotator cuff tears with fatty infiltration or atrophy for which prior surgical repair had failed. Preoperative and postoperative American Shoulder and Elbow Surgeons (ASES) and Simple Shoulder Test scores were collected, along with postoperative Single Assessment Numerical Evaluation scores. Complications and clinical failures (Δ in ASES score <17) were recorded. Patient demographic and tear characteristics were evaluated as potential risk factors for failure., Results: A total of 22 patients (mean age, 53 ± 6 years) were included in the study, with a mean follow-up time of 3.4 ± 1.1 years. Over 63% of patients (n = 14) reported undergoing 2 or more prior failed rotator cuff repairs. Patients undergoing latissimus dorsi transfer showed significant improvements in ASES scores (from 35.2 ± 21.9 preoperatively to 55.8 ± 22.9 postoperatively, P = .001), Simple Shoulder Test scores (from 3.5 ± 3.1 preoperatively to 5.2 ± 3.4 postoperatively, P = .002), and pain scores (from 5.9 ± 2.8 preoperatively to 4.6 ± 4.3 postoperatively, P = .002) at final follow-up. The complication rate after latissimus transfer was 27%. The rate of revision to reverse total shoulder arthroplasty was 13.6% (n = 3) after a mean of 2.7 years, and the clinical failure rate was 41% (n = 9) at final follow-up. An acromiohumeral interval of less than 7 mm (P = .04) and high-grade fatty infiltration (grade 3 or greater, P = .004) were significant preoperative risk factors for clinical failure., Conclusions: Latissimus dorsi tendon transfer resulted in a clinical failure rate of 41% and complication rate of 27%, with an acromiohumeral interval of less than 7 mm and high-grade fatty infiltration being associated with postoperative failure., Level of Evidence: Level IV., (Copyright © 2019 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To identify an effective, nonenzymatic method for maximizing the yield of subacromial bursa-derived nucleated cells for augmenting rotator cuff repair., Methods: Subacromial bursa (minimum 0.2 g) was collected prospectively over the supraspinatus from patients (n = 7) with at least one full-thickness tendon tear undergoing arthroscopic primary rotator cuff repair. Samples were processed and analyzed prospectively using 4 different methods: (1) mechanical digestion with scissors (chopping), (2) collagenase digestion, (3) mechanical digestion with a tissue homogenizer, and (4) whole tissue with minimal manipulation. Tissue from each method were plated and cultured in a low oxygen tension, humidified incubator for 7 days. Following incubation, cellularity was assessed with nucleated cell count using a Coulter Counter. Flow cytometry was performed on the non-enzymatic method that demonstrated the greatest cell count to confirm the presence of mesenchymal stem cells (MSCs). The Kruskal-Wallis H test and post hoc Dunn's test were used for statistical analysis., Results: Following incubation, mean nucleated cell counts (cells/mL) were (1) 102,681 ± 73,249 for chopping, (2) 76,190 ± 66,275 for collagenase, (3) 31,686 ± 29,234 for homogenization, and (4) 11,162 ± 4016 for whole tissue. There was no significant difference between chopping and collagenase (P = .45) or between homogenization and collagenase (P = .52). Both chopping (P = .003) and collagenase (P = .03) produced significantly more cells when compared with whole tissue. Flow cytometry confirmed the presence of MSC markers on samples processed by chopping., Conclusions: Mechanical isolation of subacromial bursa-derived cells using a chopping technique demonstrated similar nucleated cell count compared with collagenase, along with the confirmed presence of MSCs., Clinical Relevance: This study demonstrated a nonenzymatic, mechanical method for isolating subacromial bursa-derived cells to potentially augment rotator cuff repair. Further clinical studies are required to assess its possible advent in the tendon-bone healing process., (Copyright © 2019 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To compare the potency of mesenchymal stem cells between the cells derived from the subacromial bursa to concentrated bone marrow aspirate (cBMA) taken from patients undergoing rotator cuff (RC) repair., Methods: Subacromial bursa and cBMA were harvested arthroscopically from 13 patients (age 57.4 ± 5.2 years, mean ± standard deviation) undergoing arthroscopic primary RC repair. Bone marrow was aspirated from the proximal humerus and concentrated using an automated system (Angel System; Arthrex). Subacromial bursa was collected from 2 sites (over the RC tendon and muscle) and digested with collagenase to isolate a single cellular fraction. Proliferation, number of colony-forming units, differentiation potential, and gene expression were compared among the cells derived from each specimen., Results: The cells derived from subacromial bursa showed significantly higher proliferation compared with the cells derived from cBMA after 5, 7, and 10 days (P = .018). Regarding colony-forming units, the subacromial bursa had significantly more colonies than cBMA (P = .002). Subacromial bursal cells over the RC tendon produced significantly more colonies than cells over both the RC muscle and cBMA (P = .033 and P = .028, respectively). Moreover, when compared with cBMA, cells derived from subacromial bursa showed significantly higher differentiation ability and higher gene expression indicative of chondrogenesis, osteogenesis, and adipogenesis., Conclusion: The subacromial bursa is an easily accessible tissue that can be obtained during RC repair, with significant pluripotent stem cell potency for tendon healing. Compared with cBMA taken from the proximal humerus, bursal cells showed significantly increased differentiation ability and gene expression over time., Clinical Relevance: Failed RC repairs have been partly attributed to a poor healing environment. Biologic augmentation of the repair site may help increase healing potential and incorporation of the cuff at the tendon-bone interface., (Copyright © 2019 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To assess whether preoperative subpectoral tenderness in patients with rotator cuff tears was associated with arthroscopic findings of tendinopathy of the long head of the biceps, as well as whether they had resolution of their subpectoral tenderness postoperatively after tenodesis or tenotomy., Methods: Patients presenting between 2011 and 2016 undergoing arthroscopic rotator cuff repair were evaluated preoperatively with the subpectoral biceps test (SBT). This test is performed with the arm adducted and internally rotated to allow palpation of the biceps as it courses under the pectoralis major tendon. Preoperative SBT findings determined operative management with either tenodesis or tenotomy during rotator cuff repair. Patients were followed up postoperatively to assess resolution of subpectoral tenderness with a repeated SBT. Preoperative and postoperative Single Assessment Numeric Evaluation (SANE), American Shoulder and Elbow Surgeons, and Constant-Murley scores were recorded in all patients., Results: A total of 128 patients were enrolled in the study, with a mean age of 58 years (range, 33-82 years). Patients with a positive preoperative SBT (n = 68) had significantly lower SANE and Constant-Murley scores preoperatively (P < .01) than patients with a negative SBT (n = 60). All patients with a positive preoperative SBT underwent either tenodesis or tenotomy, with 94% of patients (n = 64) having resolution of subpectoral pain and tenderness at final follow-up. Intraoperatively, 93% of patients with a positive SBT showed gross pathologic changes in the tendon (fraying, erythema, tears, or subluxation) compared with only 65% of patients with negative preoperative examination findings (P < .01). American Shoulder and Elbow Surgeons, Constant-Murley, and SANE scores were significantly increased postoperatively in all patients (P = .02)., Conclusions: In this group of patients with rotator cuff tears surgically treated with concomitant biceps tenodesis or tenotomy, 94% had resolution of their subpectoral tenderness. A positive SBT was associated with gross pathologic changes of the biceps in 93% of patients., Level of Evidence: Level III, prospective comparative study., (Copyright © 2019 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: The primary objective was to assess whether a patient's early postoperative quality of life (QOL) correlates with the retear rate following single-tendon double-row rotator cuff repair., Methods: We performed a secondary analysis of a randomized clinical trial of 58 patients who underwent single-tendon arthroscopic rotator cuff repair of full-thickness tears performed by a single surgeon. Patients were randomized to an early- or delayed-motion protocol. At 6 months, all patients underwent magnetic resonance imaging to assess whether the rotator cuffs were intact or retorn. QOL was assessed preoperatively and at 3 weeks, 6 weeks, 12 weeks, 6 months, and 12 months postoperatively using the Western Ontario Rotator Cuff (WORC) index., Results: After 6 months of rehabilitation, 41 patients (71%) had intact rotator cuff repairs whereas 17 (29%) had full-thickness tears. Patients with torn rotator cuffs at 6 months postoperatively had significantly lower WORC scores at 6 weeks postoperatively (P = .041). Patients with greater improvements in QOL perioperatively (preoperative WORC score minus 6-week postoperative WORC score > 264.5) were more likely to have full-thickness tears by 6 months postoperatively. Compliant patients assigned to the delayed-motion protocol had a failure rate of 11% (2 of 19) compared with 38% (15 of 39) in the noncompliant and early-motion protocol patients (P < .01). Overall, patients who were noncompliant with the shoulder immobilizer were 8.2 times more likely to have a failed repair on magnetic resonance imaging (P = .01)., Conclusions: Patients with better QOL shortly after arthroscopic rotator cuff repair were more likely to have retears by 6 months., (Copyright © 2019 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Purpose: To compare a conventional single-row (SR) repair technique and 2 double-row (DR) repair techniques to restore and protect the superolateral aspect of the subscapularis (SSC) tendon and ensure SSC leading-edge reconstruction in a cadaveric model., Methods: The native footprint was measured in 15 pairs of human cadaveric shoulders (N = 30) with a mean age of 67.2 years. According to the Fox-Romeo classification, a 25% defect or 50% defect in a superior-inferior direction was created. Specimens were mounted onto a servohydraulic test system to analyze contact variables at 0° and 20° of abduction with a force-controlled ramped program up to 50 N. In addition, each specimen was cyclically loaded (10-100 N, 300 cycles). The tears were repaired with 1 of 3 constructs: a 2-anchor medially based conventional SR construct, a 2-anchor-based hybrid DR construct, or a 3-anchor-based DR construct. The outcome variables were ultimate tensile load, displacement, and pressurized footprint coverage., Results: All reconstructions resulted in stable constructs with peak loads exceeding 450 N (P = .68). The overall displacement during cyclic loading was between 1.2 and 3.0 mm (P = .70). A significant difference was seen when the 2 arm positions of 0° and 20° of abduction were compared, showing a constant reduction of pressurized footprint coverage with the arm abducted (P = .01). Analyzing footprint coverage with respect to the region of interest-the leading edge of the SSC-we observed a significant difference between the SR construct and a construct using a superolaterally placed anchor (25% defect, P = .01; 50% defect, P = .01), whereas no statistical differences were detectable between the hybrid DR construct and the DR construct., Conclusions: The leading edge of the SSC tendon can best be restored by using a superolateral anchor, whereas no statistical difference in load to failure in comparison with an SR construct or with the addition of a third anchor was detectable., Clinical Relevance: The SSC is critical for proper shoulder function. Without an increase in the number of implants, a significantly better footprint reconstruction can be achieved by placing an anchor superior and lateral to the native footprint area close to the entrance of the bicipital groove., (Copyright © 2019 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: The objective of this biomechanical study is to compare two variations of single-row knotless techniques (Knotless repair and Rip-stop Knotless repair) against a single-row double-loaded anchor (DL) repair, focused on evaluating contact pressure and contact area amongst three different single-row techniques for rotator cuff repairs., Methods: A total of 24 fresh frozen human shoulders were tested. Specimens were randomly assigned into one of the three single-row (SR) repair groups: A Knotted single-row double-loaded anchor (DL) repair, a Knotless (K) repair, or a Knotless Rip-Stop (KRS) repair. The footprint was measured after complete detachment of the supraspinatus tendon from the greater tuberosity, introducing pressure sensors between bony footprint and detached rotator cuff, and finally reconstructing it. All specimens were mounted onto a servohydraulic test system to analyze contact variables at 0° and 30° of abduction with 0 N, 30 N and 50 N of tension., Results: Groups did not differ significantly in their footprint sizes: DL group 359.75 ± 58.37 mm 2 , K group 386.5 ± 102.13 mm 2 , KRS group 415.87 ± 93.80 mm 2 (p = 0.84); nor in bone mineral density: DL group 0.25 ± 0.14 g/cm 2 , K group 0.32 ± 0.19 g/cm 2 , KRS group 0.32 ± 0.13 g/cm 2 , (p = 0.75) or average age. The highest mean pressurized contact area measured for the K repair was 248.1 ± 50.9 mm 2 , which equals a reconstruction of 67.1 ± 19.3% at 0° abduction and a 50 N supraspinatus load. This reconstructed area was significantly greater compared with the DL repair 152.8 ± 73.1 mm 2 , reconstructing 42.0 ± 18.5% on average when under the same conditions (p = 0.04). The mean contact pressure did not significantly differ amongst groups (p = 1.0): DL group 30.8 ± 17.4 psi, K group 30.9 ± 17.4 psi and KRS group 30.0 ± 10.9 psi. Neither the 30° abduction angle nor the supraspinatus load had a significant influence on the contact pressure in our study., Conclusion: Both single-row knotless techniques resulted in significantly higher footprint reconstruction, providing larger contact area and a more uniform pressure distribution when compared with the single-row Knotted techniques. The mean contact pressure did not differ among groups significantly. These knotless techniques may be an alternative if the surgeon decides to perform a single-row rotator cuff repair., Level of Evidence: Basic Science Study, Biomechanics.

Background: Delamination in rotator cuff tears has been identified as a prognostic factor for negative outcome after repair, with a reported prevalence between 38% and 88%., Purpose: To compare biomechanical properties of 3 repair techniques for delaminated rotator cuff tears., Study Design: Controlled laboratory study., Methods: Eighteen fresh-frozen cadaveric shoulders were used to evaluate rotator cuff footprint reconstruction, contact area and pressure, displacement under cyclical loading, and load to failure of 3 double-row repair configurations: double-row suture repair with medial row knots (medially knotted bridge, mkB); knotless double-row repair using suture tapes (knotless bridge, klB); and knotless double-row, double-layer-specific repair (double-layer, DL). Dynamic pressure sensors were used to assess contact patterns at the footprint region in 0°, 30°, and 60° of glenohumeral abduction and 5 rotational positions (0°, 30° of internal rotation, 30° of external rotation, 60° of internal rotation, 60° of external rotation). Optical markers were used to document whole tendon and individual layer displacement after rotator cuff repair under cyclical loading for 200 cycles (10 N to 100 N at 1 Hz). Specimens were then loaded monotonically to failure at a rate of 33 mm/min., Results: Mean contact area and footprint restoration were highest in the DL group at 60° of glenohumeral abduction for all rotational positions (mkB mean ± SD, 195.4 ± 54.3 mm 2 , 66.7% ± 19.7%; klB, 250.6 ± 34.9 mm 2 , 76.2% ± 10.3%; DL, 318.4 ± 36.6 mm 2 , 109.1% ± 24.0%; P < .001). The double-layer-specific repair showed the least displacement under cyclical loading (mkB mean ± SD, 0.53 ± 0.18 mm; klB, 0.79 ± 0.37 mm; DL, 0.31 ± 0.24 mm; P = .029), most closely resembling the native tendon. Peak loads at failure were comparable between repair groups (mkB mean ± SD, 366.92 ± 70.59 N; klB, 280.05 ± 77.66 N; DL, 398.35 ± 109.04 N; P = .083)., Conclusion: Anatomic restoration of the superior capsular and tendon insertion in delaminated rotator cuff tears with a double-layer-specific repair configuration demonstrated superior footprint restoration with increasing abduction, while providing construct displacement comparable to the native tendon under cyclical loading. Peak load at failure was comparable between repair constructs., Clinical Relevance: The prevalence and clinical importance of delaminated rotator cuff tears have long been underestimated. Anatomically correct individual reconstruction of the superior capsule and rotator cuff could restore near-native biomechanics and potentially reduce the risk of rotator cuff repair failure.

Purpose: To evaluate the effect of critical shoulder angle (CSA), acromion index (AI), and glenoid inclination (GI) on the postoperative healing rate after arthroscopic supraspinatus tendon repair., Methods: Patients after arthroscopic repair of a symptomatic, unilateral, single-tendon, full-thickness supraspinatus tear in whom nonoperative management had failed were retrospectively reviewed. Magnetic resonance imaging (MRI) studies were obtained 6 months postoperatively and were evaluated by 2 independent observers. Repair integrity was classified as either intact or torn. Preoperative true anteroposterior radiographs were used to measure CSA, AI, and GI., Results: Fifty-seven patients were evaluated 6 months postoperatively. The mean patient age at surgery was 54.7 ± 7.7 years. On MRI studies, 41 patients (71.9%) had an intact repair and 16 patients (28.1%) had a full-thickness retear. There were no significant differences between the intact and retear group in regard to patient age (P = .648), initial tear size (P = .205), or fatty degeneration (P = .508). The mean CSA for the retear group (37° ± 4°) was significantly higher than that in the intact group (35° ± 3°; P = .014). If the CSA was >38°, the odds ratio of having a retear was 3.78 (95% confidence interval 1.05 to 13.58; P = .042). Average AI for the retear group (0.73 ± 0.09) was significantly higher than that in the intact group (0.69 ± 0.06; P = .049). The mean GI was 17° ± 6° for the intact group and 16° ± 6° for the retear group (P = .739)., Conclusions: At short-term follow-up, higher CSA and AI significantly increased the retear risk after arthroscopic supraspinatus tendon repair. CSA >38° increased the retear risk almost 4-fold. Overall GI was elevated but did not correlate with failure rate., Level of Evidence: III, case control study., (Copyright © 2018 Arthroscopy Association of North America. All rights reserved.)

Background: Previous biomechanical studies regarding deltoid function during glenohumeral abduction have primarily used static testing protocols., Hypotheses: (1) Deltoid forces required for scapular plane abduction increase as simulated rotator cuff tears become larger, and (2) maximal abduction decreases despite increased deltoid forces., Study Design: Controlled laboratory study., Methods: Twelve fresh-frozen cadaveric shoulders with a mean age of 67 years (range, 64-74 years) were used. The supraspinatus and anterior, middle, and posterior deltoid tendons were attached to individual shoulder simulator actuators. Deltoid forces and maximum abduction were recorded for the following tear patterns: intact, isolated subscapularis (SSC), isolated supraspinatus (SSP), anterosuperior (SSP + SSC), posterosuperior (infraspinatus [ISP] + SSP), and massive (SSC + SSP + ISP). Optical triads tracked 3-dimensional motion during dynamic testing. Fluoroscopy and computed tomography were used to measure critical shoulder angle, acromial index, and superior humeral head migration with massive tears. Mean values for maximum glenohumeral abduction and deltoid forces were determined. Linear mixed-effects regression examined changes in motion and forces over time. Pearson product-moment correlation coefficients ( r) among deltoid forces, critical shoulder angles, and acromial indices were calculated., Results: Shoulders with an intact cuff required 193.8 N (95% CI, 125.5 to 262.1) total deltoid force to achieve 79.8° (95% CI, 66.4° to 93.2°) of maximum glenohumeral abduction. Compared with native shoulders, abduction decreased after simulated SSP (-27.2%; 95% CI, -43.3% to -11.1%, P = .04), anterosuperior (-51.5%; 95% CI, -70.2% to -32.8%, P < .01), and massive (-48.4%; 95% CI, -65.2% to -31.5%, P < .01) cuff tears. Increased total deltoid forces were required for simulated anterosuperior (+108.1%; 95% CI, 68.7% to 147.5%, P < .01) and massive (+57.2%; 95% CI, 19.6% to 94.7%, P = .05) cuff tears. Anterior deltoid forces were significantly greater in anterosuperior ( P < .01) and massive ( P = .03) tears. Middle deltoid forces were greater with anterosuperior tears ( P = .03). Posterior deltoid forces were greater with anterosuperior ( P = .02) and posterosuperior ( P = .04) tears. Anterior deltoid force was negatively correlated ( r = -0.89, P = .01) with critical shoulder angle (34.3°; 95% CI, 32.0° to 36.6°). Deltoid forces had no statistical correlation with acromial index (0.55; 95% CI, 0.48 to 0.61). Superior migration was 8.3 mm (95% CI, 5.5 to 11.1 mm) during testing of massive rotator cuff tears., Conclusion: Shoulders with rotator cuff tears require considerable compensatory deltoid function to prevent abduction motion loss. Anterosuperior tears resulted in the largest motion loss despite the greatest increase in deltoid force., Clinical Relevance: Rotator cuff tears place more strain on the deltoid to prevent abduction motion loss. Fatigue or injury to the deltoid may result in a precipitous decline in abduction, regardless of tear size.

Background: Numerous studies have identified factors that may affect the chances of rotator cuff healing after surgery. Intraoperative tendon quality may be used to predict healing and to determine type of repair and/or consideration of augmentation. There are no data that correlate how gross tendon morphology and degree of tendinopathy affect patient outcome or postoperative tendon healing. Purpose/Hypothesis: The purposes of this study were to (1) compare the gross appearance of the tendon edge during arthroscopic rotator cuff repair with its histological degree of tendinopathy and (2) determine if gross appearance correlated with postoperative repair integrity. The hypothesis was that gross (macroscopic) tendon with normal thickness, no delamination, and elastic tissue before repair would have a correlation with low Bonar scores, higher postoperative American Shoulder and Elbow Surgeons (ASES) scores, and increased rates of postoperative tendon healing on ultrasound., Study Design: Cross-sectional study; Level of evidence, 3., Methods: A total of 105 patients undergoing repair of medium-size (1-3 cm) full-thickness rotator cuff tears were enrolled in the study. Intraoperatively, the supraspinatus tendon was rated on thickness, fraying, and stiffness. Tendon tissue was recovered for histological analysis based on the Bonar scoring system. Postoperative ASES and ultrasound assessment of healing were obtained 1 year after repair. Correlation between gross appearance of the tendon and rotator cuff histology was determined., Results: Of the 105 patients, 85 were followed the study to completion. The mean age of the patients was 61.6 years; Bonar score, 7.5; preoperative ASES score, 49; and postoperative ASES score, 86. Ninety-one percent of repairs were intact on ultrasound. Gross appearance of torn rotator cuff tendon tissue did not correlate with histological appearance. Neither histological (Bonar) score nor gross appearance correlated with multivariate analysis of ASES score, postoperative repair status, or demographic data., Conclusion: The degree of tendinopathy did not correlate with morphological appearance of the tendon. Neither of these parameters correlated with healing or patient outcome. This study suggests that the degree of tendinopathy, unlike muscle atrophy, may not be predictive of outcomes and that, on appearance, poor quality tendon has adequate healing capacity. Therefore, abnormal gross tendon appearance should not affect the repair effort or technique.

Purpose: To compare the effect of early versus delayed motion protocols on quality of life, clinical outcomes, and repair integrity in patients who have undergone arthroscopic single-tendon rotator cuff repair., Methods: This was a prospective, randomized, investigator-blinded clinical trial. Seventy-three patients from a single surgeon's practice who underwent arthroscopic repair of a single-tendon rotator cuff tear were randomized to either an early motion protocol (starting 2 to 3 days after surgery) or a delayed motion protocol (starting 28 days after surgery). The primary outcome measure was the Western Ontario Rotator Cuff index (WORC). Secondary outcome measures included clinical outcome scores, integrity of the repair on 6-month magnetic resonance imaging scans, pain scores, physical examination data, and ultrasonography. Study participants were followed up at 3, 6, and 12 weeks; 6 months; and 1 year postoperatively., Results: There was no statistically significant difference in WORC scores at 6 months (529 ± 472 in delayed group vs 325 ± 400 in early group, P = .08). Mixed-effects analysis indicated the early group maintained lower WORC scores throughout the postoperative period (estimated difference of 191, P = .04). The proportions of patients with tears on the 6-month postoperative magnetic resonance imaging scan were comparable (31% in delayed group vs 34% in early group, P = .78)., Conclusions: There was no difference between the delayed and early motion groups in WORC scores at 6 months after surgery. Early motion was associated with lower WORC scores throughout the postoperative period; however, both groups had a similar trajectory of improvement, suggesting both protocols have the same effect on patient-reported improvement. Although failure rates were similar between the groups, the sample size was not sufficient to support a statement regarding the relation between tear morphology and the rehabilitation protocol., Level of Evidence: Level II, lesser-quality randomized controlled trial., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Rotator cuff (RC) tears represent a large proportion of musculoskeletal injuries attended to at the clinic and thereby make RC repair surgeries one of the most widely performed musculoskeletal procedures. Despite the high incidence rate of RC tears, operative treatments have provided minimal functional gains and suffer from high re-tear rates. The hypocellular nature of tendon tissue poses a limited capacity for regeneration. In recent years, great strides have been made in the area of tendonogenesis and differentiation towards tendon cells due to a greater understanding of the tendon stem cell niche, development of advanced materials, improved scaffold fabrication techniques, and delineation of the phenotype development process. Though in vitro models for tendonogenesis have shown promising results, in vivo models have been less successful. The present work investigates structured matrices mimicking the tendon microenvironment as cell delivery vehicles in a rat RC tear model. RC injuries augmented with a matrix delivering rat mesenchymal stem cells (rMSCs) showed enhanced regeneration over suture repair alone or repair with augmentation, at 6 and 12-weeks post-surgery. The local delivery of rMSCs led to increased mechanical properties and improved tissue morphology. We hypothesize that the mesenchymal stem cells function to modulate the local immune and bioactivity environment through autocrine/paracrine and/or cell homing mechanisms. This study provides evidence for improved tendon healing with biomimetic matrices and delivered MSCs with the potential for translation to larger, clinical animal models. The enhanced regenerative healing response with stem cell delivering biomimetic matrices may represent a new treatment paradigm for massive RC tendon tears.

Purpose of this study: To elucidate the origin of cell populations that contribute to rotator cuff healing, we developed a mouse surgical model where a full-thickness, central detachment is created in the supraspinatus., Materials and Methods: Three different inducible Cre transgenic mice with Ai9-tdTomato reporter expression (PRG4-9, αSMA-9, and AGC-9) were used to label different cell populations in the shoulder. The defect was created surgically in the supraspinatus. The mice were injected with tamoxifen at surgery to label the cells and sacrificed at 1, 2, and 5 weeks postoperatively. Frozen sections were fluorescently imaged then stained with Toluidine Blue and re-imaged., Results: Three notable changes were apparent postoperatively. (1) A long thin layer of tissue formed on the bursal side overlying the supraspinatus tendon. (2) The tendon proximal to the defect initially became hypercellular and disorganized. (3) The distal stump at the insertion underwent minimal remodeling. In the uninjured shoulder, tdTomato expression was seen in the tendon midsubstance and paratenon cell on the bursal side in PRG4-9, in paratenon, blood vessels, and periosteum of acromion in SMA-9, and in articular cartilage, unmineralized fibrocartilage of supraspinatus enthesis, and acromioclavicular joint in AGC-9 mice. In the injured PRG4-9 and SMA-9 mice, the healing tissues contained an abundant number of tdTomato+ cells, while minimal contribution of tdTomato+ cells was seen in AGC-9 mice., Conclusions: The study supports the importance of the bursal side of the tendon to rotator cuff healing and PRG4 and αSMA may be markers for these progenitor cells., Competing Interests: DECLARATION OF INTEREST Augustus D. Mazzocca has received research support from Arthrex, Inc, Naples, Florida.

Background: Rotator cuff reconstructions may be improved by adding growth factors, cells, or other biologic factors into the repair zone. This usually requires a biological carrier (scaffold) to be integrated into the construct and placed in the area of tendon-to-bone healing. This needs to be done without affecting the constructs mechanics. Hypothesis/, Purpose: The hypothesis was that scaffold placement, as an interposition, has no adverse effects on biomechanical properties of double-row rotator cuff repair. The purpose of this study was to examine the effect of scaffold interposition on the initial strength of rotator cuff repairs., Study Design: Controlled laboratory study., Methods: Twenty-five fresh-frozen shoulders (mean age: 65.5 ± 8.9 years) were randomly assigned to 5 groups. Groups were chosen to represent a broad spectrum of commonly used scaffold types: (1) double-row repair without augmentation, (2) double-row repair with interposition of a fibrin clot (Viscogel), (3) double-row repair with interposition of a collagen scaffold (Mucograft) between tendon and bone, (4) double-row repair with interposition of human dermis patch (ArthroFlex) between tendon and bone, and (5) double-row repair with human dermis patch (ArthroFlex) placed on top of the repair. Cyclic loading to measure displacement was performed to 3000 cycles at 1 Hz with an applied 10- to 100-N load. The ultimate load to failure was determined at a rate of 31 mm/min., Results: There were no significant differences in mean displacement under cyclic loading, slope, or energy absorbed to failure between all groups (P = .128, P = .981, P = .105). Ultimate load to failure of repairs that used the collagen patch as an interposition (573.3 ± 75.6 N) and a dermis patch on top of the reconstruction (575.8 ± 22.6 N) was higher compared with the repair without a scaffold (348.9 ± 98.8 N; P = .018 and P = .025). No significant differences were found for repairs with the fibrin clot as an interposition (426.9 ± 103.6 N) and the decellularized dermis patch as an interposition (469.9 ± 148.6 N; P = .73 and P = .35)., Conclusion: Scaffold augmentation did not adversely affect the zero time strength of the tested standard double-row rotator cuff repairs. An increased ultimate load to failure was observed for 2 of the augmentation methods (collagen patch as an interposition and decellularized dermis patch on top of the reconstruction) compared with the nonaugmented repairs., Clinical Relevance: Scaffolds intended for application of growth factors or cellular components in a repair situation did not adversely jeopardize the stability of the operative construct.

Purpose: The purpose of this study was to determine the interobserver reliability of 3 commonly used classification systems in describing preoperative magnetic resonance imaging (MRI) studies of patients undergoing surgery for full-thickness rotator cuff tears., Methods: Thirty-one patients who underwent arthroscopic rotator cuff repair and had preoperative MRI studies available were selected over a 2-year period. Three board-certified shoulder surgeons independently reviewed these images. Each was instructed in the published method for determining the Patte score on the T2 coronal images, supraspinatus and infraspinatus atrophy on the T1 sagittal images as described by Warner et al., and the Goutallier score of fatty infiltration of the supraspinatus on the T1 coronal/sagittal images. Statistical analysis was then performed to determine the interobserver agreement using the κ statistic, with the level of significance set a priori at P < .01., Results: None of the classification systems studied yielded excellent or high interobserver reliability. The strongest agreement was found with the Patte classification assessing tendon retraction in the frontal plane (κ = 0.58). The Goutallier classification, which grades fatty infiltration of the supraspinatus, showed moderate interobserver agreement (κ = 0.53) when dichotomized into none to mild (grades 0, 1, and 2) and moderate to severe (grades 3 and 4). Muscle atrophy of both the supraspinatus and infraspinatus yielded the worst interobserver reliability, with only 28% agreement., Conclusions: The Goutallier, Patte, and Warner MRI classification systems for describing rotator cuff tears did not have high interobserver reliability among 3 experienced orthopaedic surgeons. Fatty infiltration of the supraspinatus and tendon retraction in the frontal planes showed only moderate reliability and moderate to high reliability, respectively. These findings have potential implications in the evaluation of the literature regarding the preoperative classification of rotator cuff tears and subsequent treatment algorithms., Level of Evidence: Level III, diagnostic agreement study with nonconsecutive patients., (Copyright © 2012 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: The purpose of this study was to compare tendon-bone footprint contact area over time under physiologic loads for 4 different rotator cuff repair techniques: single row (SR), triangle double row (DR), chain-link double row (CL), and diamondback double row (DBK)., Methods: A supraspinatus tear was created in 28 human cadavers. Tears were fixed with 1 of 4 constructs: SR, DR, CL, or DBK. Immediate post-repair measurements of pressurized contact area were taken in neutral rotation and 0° of abduction. After a static tensile load, pressurized contact area was observed over a 160-minute period after repair. Cyclic loading was then performed., Results: The DBK repair had the highest pressurized contact area initially, as well as the highest pressurized contact area and lowest percentage decrease in pressurized contact area after 160 minutes of testing. The DBK repair had significantly larger initial pressurized contact than CL (P = .003) and SR (P = .004) but not DR (P = .06). The DBK technique was the only technique that produced a pressurized contact area that exceeded the native footprint both at initial repair (P = .01) and after 160 minutes of testing (P = .01). DBK had a significantly larger mean pressurized contact area than all the repairs after 160 minutes of testing (P = .01). DBK had a significantly larger post-cyclic loading pressurized contact area than CL (P = .01) and SR (P = .004) but not DR (P = .07)., Conclusions: This study showed that a diamondback repair (a modification of the transosseous repair) can significantly increase the rotator cuff pressurized contact area in comparison with other standard rotator cuff repair constructs when there is sufficient tendon mobility to perform a double-row repair without excessive tension on the repair site., Clinical Relevance: The persistent pressurized contact area of a DBK repair may be desirable to enhance healing potential when there is sufficient tendon mobility to perform a double-row repair, particularly for large or massive rotator cuff tears where it is important to optimize footprint area and contact to encourage biologic healing., (Copyright © 2012 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: There are few biomechanical studies regarding partial-thickness rotator cuff tears and subsequent repair., Hypothesis: Partial-thickness intra-articular supraspinatus tendon tears increase articular-sided tendon strain as they increase in size. Repair of these tears will return strain to the intact state., Study Design: Controlled laboratory study., Methods: Twenty fresh-frozen human cadaveric shoulders were prepared by dissecting to the supraspinatus tendon and leaving the native footprint intact. The tendon footprint was measured with digital calipers and divided into thirds (anterior, middle, and posterior). The middle third was the area where a consistent partial tear was created based on the thickness of the specimens' particular footprint. Created were 25%, 50%, and 75% tears. Image analysis software and differential variable reluctance transducers strain gauges were used to measure strain. A 100 N load at 1 Hz for 30 cycles was conducted for glenohumeral angles of 45 degrees, 60 degrees, and 90 degrees. This was completed for the intact tendon, 25%, 50%, and 75% tears. Shoulders were then repaired using the in situ fixation method. The in situ method consisted of either a parachute anchor or metal corkscrew anchor. Eight shoulders were examined for load-to-failure testing with the Materials Testing System., Results: There was a significant difference (P < .05) in rotator cuff strain between the intact rotator cuff tendon and 50% and 75% partial-thickness tears. The cuff strain was returned to the intact state with repair. This was consistent for 3 different glenohumeral abduction angles and for all 3 intra-articular tendon areas. The bursal strain did not have any significant differences between groups., Conclusion: Articular-sided tendon strain increases consistently across the supraspinatus tendon with greater partial tears. Repair returned strain close to the intact state., Clinical Relevance: This study may add credence to the clinical practice of repairing intra-articular partial-thickness rotator cuff tears greater than 50%.

The purpose of this study is to evaluate ultrasonic suture welding of monofilament suture in an animal model of rotator cuff repair with biomechanical and histologic analyses. We randomly assigned 46 shoulders in 23 rabbits to 1 of 3 treatment groups: sham-operated (n = 15), knotted (n = 15), and welded (n = 16). Supraspinatus defects were surgically created and acutely repaired with suture anchors loaded with either No. 2-0 Ethibond for knotted group or No. 2-0 nylon for welded shoulders. Eighteen weeks postoperatively, all animals were killed, and the shoulders underwent either biomechanical testing or histologic analysis. The maximum stress of the sham-operated group (20.6 N/mm2) was significantly greater than that of both the knotted (10.2 N/mm2) and welded (8.3 N/mm2) groups (P < .05), but no differences were observed between the knotted and welded groups. Although some histologic changes were noted, none was considered to be significant to distinguish either group.

Background: In young patients with irreparable subscapularis deficiency (SSC-D) and absence of severe osteoarthritis, anterior latissimus dorsi transfer (aLDT) has been proposed as a treatment option to restore the anteroposterior muscular force couple to regain sufficient shoulder function. However, evidence regarding the biomechanical effect of an aLDT on glenohumeral kinematics remains sparse. Purpose/Hypothesis: The purpose of this study was to investigate the effects of an aLDT on range of glenohumeral abduction motion, superior migration of the humeral head (SM), and cumulative deltoid force (cDF) in a simulated SSC-D model using a dynamic shoulder model. It was hypothesized that an aLDT would restore native shoulder kinematics by reestablishing the insufficient anteroposterior force couple. Study Design: Controlled laboratory study. Methods: Eight fresh-frozen cadaveric shoulders were tested using a validated shoulder simulator. Glenohumeral abduction angle (gAA), SM, and cDF were compared across 3 conditions: (1) native, (2) SSC-D, and (3) aLDT. gAA and SM were measured using 3-dimensional motion tracking, while cDF was recorded in real time during dynamic abduction motion by load cells connected to actuators. Results: The SSC-D significantly decreased gAA (Δ–9.8°; 95% CI, –14.1° to −5.5°; P <.001) and showed a significant increase in SM (Δ2.0 mm; 95% CI, 0.9 to 3.1 mm; P =.003), while cDF was similar (Δ7.8 N; 95% CI, –9.2 to 24.7 N; P =.586) when compared with the native state. Performing an aLDT resulted in a significantly increased gAA (Δ3.8°; 95% CI, 1.8° to 5.7°; P <.001), while cDF (Δ–36.1 N; 95% CI, –48.7 to −23.7 N; P <.001) was significantly reduced compared with the SSC-D. For the aLDT, no anterior subluxation was observed. However, the aLDT was not able to restore native gAA (Δ–6.1°; 95% CI, –8.9° to −3.2°; P <.001). Conclusion: In this cadaveric study, performing an aLDT for an irreparable subscapularis insufficiency restored the anteroposterior force couple and prevented superior and anterior humeral head migration, thus improving glenohumeral kinematics. Furthermore, compensatory deltoid forces were reduced by performing an aLDT. Clinical Relevance: Given the favorable effect of the aLDT on shoulder kinematics in this dynamic shoulder model, performing an aLDT may be considered as a treatment option in patients with irreparable SSC-D. [ABSTRACT FROM AUTHOR]

Reverse total shoulder arthroplasty (RSA) primarily varies between 2 implant design options: a 135 humeral stem inclination that closely resembles anatomic orientation, versus the Grammont-style 155 humeral stem inclination that further medializes and distalizes the center of rotation (COR). The purpose of this study was to compare deltoid force, glenoid strain, and simulated glenohumeral range of motion (ROM) between RSA 135 and RSA 155 designs, with a series of standardized permutations of glenosphere offset and rotator cuff pathology. Twelve fresh-frozen cadaveric shoulder specimens were studied using a shoulder simulator. Native shoulder motion profiles for reproducible abduction range of motion were established using a customized testing device. Optical 3-dimensional tracking and pressure sensors were used to accurately record glenohumeral range of motion (ROM), deltoid force, and glenoid strain for RSA 135 and RSA 155 designs. For each cohort, all combinations of glenosphere offsets and rotator cuff tendon involvement were evaluated. There was no significant difference in the overall abduction ROM between the 155 and the 135 humeral stem implants (P =.75). Resting abduction angle and maximum abduction angle were significantly greater with a 155 + STD (standard offset) construct than with a 135 + STD construct (P <.001 and P =.01, respectively). Both stem inclinations decreased combined deltoid force requirements as compared the native shoulder with a massive cuff tear. Effective glenoid strain did not vary significantly between 135 + STD and 155 + STD constructs (P =.66). Overall, range of motion between the 135 and the 155 humeral stem inclinations was not significantly different. The cumulative deltoid force was lower in RSA shoulders when compared to native shoulders with massive rotator cuff tears, highlighting the utility of both implant designs. The Grammont-style 155 stem coupled with a 2.5 mm inferior offset glenosphere required less deltoid force to reach maximum abduction than did the more anatomic, lateralized 135 stem coupled with a 4 mm lateral offset glenosphere. Controlled Laboratory Study [Display omitted] [ABSTRACT FROM AUTHOR]

Background: Traumatic labral tears involving the anterior, inferior, and posterior aspects of the glenoid fossa represent a unique subpopulation of shoulder instability. Purpose: This study was undertaken to evaluate prospectively the clinical results of patients who underwent arthroscopic repair of 270° labral tears. Study Design: Case series; Level of evidence, 4. Methods: This was a prospective outcomes analysis of patients who underwent arthroscopic stabilization of a 270° labral tear. Inclusion criteria included patients with traumatic injury and primarily anteroinferior instability but several had posterior instability as well. Imaging revealed extensive labral injury in all patients. Indications for repair included symptomatic instability, 2+ anterior-inferior and posterior-inferior load-shift testing, and arthroscopic confirmation of labral lesions that extended anteriorly, inferiorly, and with extension to the midglenoid posteriorly. Exclusion criteria were SLAP (superior labrum anterior and posterior) lesions, revisions, and nontraumatic injuries. All patients underwent an arthroscopic repair utilizing modern suture anchor technique. Outcome measures included preoperative and postoperative Rowe, American Shoulder and Elbow Surgeons (ASES), Simple Shoulder Test (SST), and Constant Murley scores. The Western Ontario Shoulder Instability Index (WOSI) and the Single Assessment Numeric Evaluation (SANE) scores were collected postoperatively. Failure was defined as any days missed from sport activity or work due to an instability event. Results: Twenty-three 270° labral repairs were performed in 21 patients by a single surgeon. Twenty shoulders in 19 patients (92%) were followed for a mean of 28 months (range, 14-47 months) postoperatively. The mean preoperative and postoperative outcome scores showed statistically significant improvements (P ≤ .001): Rowe (59 to 92), ASES (76 to 93), SST (9 to 11), and Constant scores (73 to 95). The mean SANE score was 91 of 100 and the mean WOSI score was 302. Three of the 20 shoulders (in 19 patients) had subsequent episodes of instability for a failure rate of 15%. One required a second procedure for continued instability for a revision rate of 5%. Two patients developed adhesive capsulitis postoperatively of which one required an arthroscopic arthrolysis. Conclusion: Arthroscopic repair of these extensive labral injuries involving 270° of the glenoid fossa was an effective surgical treatment and restored mechanical stability of the shoulder. The arthroscopic approach allowed for complete visualization and repair of all labral pathology. [ABSTRACT FROM AUTHOR]

Background: pulmonary embolism (PE) is a rare and serious complication of arthroscopic orthopaedic surgery. Currently there is great paucity in the literature regarding PE events following arthroscopic rotator cuff (ARCR) surgery. The purpose of this case series was to (1) report our known incidence rate of symptomatic PE following ARCR for a single surgeon and (2) describe five cases of pulmonary embolism following ARCR, detailing patient medical history and potential perioperative risk factors. Methods: the number of PE events were queried retrospectively from the institutional database with the ICD-9 code 415.1 within a 10 year time frame (2003-2013). Cases of PE identified by ICD-9 query were reviewed for type of procedure, postoperative day of event, and surgeon. Only patients with a confirmed diagnosis by computed tomography (CT) scan or post-mortem exam, were included in this study. Patient medical records belonging to affected patients were ordered and reviewed by a single investigator. Pre, intra, and postoperative information was obtained and summarized. Results: 5 cases of PE were identified, two of which were fatal. All events occurred in the perioperative period following ARCR. The 10 year incidence rate for PE following ARCR was 0.89%. Medical record review revealed significant risk factors for these patients when compared to current VTE prophylactic guidelines. Conclusions: our ten year incidence rate of PE following arthroscopic shoulder surgery and ARCR was 0.25 and 0.89% respectively. These rates were found to be considerably higher than reported rates of PE in the general population and following arthroscopic shoulder surgery. In addition, our methods failed to detect subclinical PE events, resulting in the likelihood of this value to be an underestimate of the true incidence. Medical record review revealed risk factors which would qualify patients for chemoprophylaxis under certain guidelines, however, the validity of available risk stratification methods continue to be a topic of debate. Level of Evidence: Level IV; case series. [ABSTRACT FROM AUTHOR]