Search

A simulation based on VISSIM and its external driver model dynamic link library (DLL) was used to investigate the efficiency and safety of a two-way left-turn lane (TWLTL) on roads with staggered intersections (SIs). The impacts of traffic volume, ratio of left-turn vehicles, and stagger distance on SIs and conventional cross intersection (CI) were simulated with the following results: (1) SIs with stagger distance shorter than 200 m show few advantages in terms of average delay over a CI irrespective of traffic volume and left-turn ratio; (2) In contrast, SIs with stagger distance longer than 200 m show advantages that, however, disappear with an increase in traffic volume and left-turn ratio; and (3) SIs show a significantly higher number of traffic conflicts than CIs, indicating that they have more serious safety problems. These results should help traffic researchers and practitioners decide whether it is feasible to establish SIs on existing roadways with TWLTLs and the appropriate stagger distance for SIs, as well as whether it is appropriate to change a road that has dense SIs into a TWLTL cross section. [ABSTRACT FROM AUTHOR]

Sight distance at the intersection of a minor road (controlled by a stop sign) and a major road is an important element of road safety. Several models have been recently developed for the analysis of sight distance at intersections involving horizontal curves on the major road. All these models assume that the intersection lies within the horizontal curve. There are situations, however, when the intersection lies within one of the tangents of the horizontal curve. This case would adversely affect sight distance, especially when the horizontal curve is sharp and the minor road is close to the horizontal curve. This paper develops a new mathematical model for sight distance analysis that explicitly addresses the case where the intersection lies within the tangents of the horizontal curve. The obstruction may be located within the tangent or within the horizontal curve, or located inside or outside of the horizontal curve. Using the model, graphical aids for the required obstruction distances from the major and minor roads, to satisfy sight distance requirements, are developed. The developed model can be used to evaluate sight distance for existing or new intersections. [ABSTRACT FROM AUTHOR]