Search

The current study focuses on the synthesis of Cerium oxide (CeO2) nanocatalyst via Tragacanth Gum (TG) using the wet impregnation method and its application for sustainable biodiesel production from a novel, non-edible Descurainia sophia (L.) Webb ex Prantl seed oil. The D. sophia seed oil has higher oil content (36 wt%) and free fatty acid (FFA) value (0.6 mg KOH/g). Innovative analytical methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy, were used to characterize the newly synthesized, environmentally friendly, and recyclable CeO2-TG phytonanocatalyst (FT-IR). The results show that the CeO2-TG phytonanocatalyst was 22 nm in diameter with a spherical shape outer morphology, while the inner structure was hexagonal. Due to low FFA content, the D. sophia seed oil was pretreated and transesterified via a single step. Using varying parameters, the optimized process variables were determined via Response Surface Methodology (RSM). The optimum process values were 8:1 methanol to oil molar ratio, 0.3 wt% catalyst concentration, 90 °C temperature, and reaction time of 210 min with 98% biodiesel yield. The recently created phytonanocatalyst was reliable and effective, with three times reusability in the transesterification reaction. Thin layer chromatography (TLC), FT-IR, gas chromatography–mass spectroscopy (GCMS), and Nuclear magnetic resonance (NMR) analyses were used to characterize the synthesized biodiesel. Physico-chemical properties of D. sophia biodiesel, i.e., Kinematic viscosity (4.23 mm2/s), density (0.800 kg/m3), pour point (−7 °C), cloud point (−12 °C), and flash point (73.5 °C) agree well with international biodiesel standards (ASTM-6751, 951), (EU-14214), and China (GB/T 20828) standards. The results show that the synthesized nanocatalyst demonstrated remarkable stability, indicating a bright future for industrial biodiesel production from low-cost feedstock. [ABSTRACT FROM AUTHOR]

[Display omitted] • Cannabis sativa non-edible seed oil as an efficient source for biofuel. • Synthesis of WO 3 nanoparticles to catalyze transesterification. • Use of Central Composite Design CCD for optimization reactions. • Optimum biodiesel yield of 91 wt% was obtained. • Fuel propertied of biodiesel matched well with international standards. Current study focuses on the utilization of non-edible oil seeds of Cannabis sativa as an economical feedstock for synthesizing high quality biodiesel using novel, green and extremely reactive tungsten oxide (WO 3) nano catalyst. The as synthesized green nanoparticles (NPs) were examined using Fourier-transform infrared spectroscopy (FT-IR), X-ray Diffraction (XRD), energy diffraction X-ray (EDX) and scanning electron microscopy (SEM). Results showed that WO 3 has spherical crystal structure with a diameter of 45 nm. Highest biodiesel yield (91 wt%) was achieved under dynamic conditions i.e. , 2 wt% catalyst, 1:7 oil to methanol molar ratio, 80 °C reaction temperature for 120 min. The reaction conditions were optimized via Response Surface Methodology. WO 3 NPs showed catalytic stability up to five rounds. The fuel characteristics of biodiesel met the values set by international standards. Non-edible Cannabis sativa seed oil and novel green WO 3 nano-catalyst are economical choices to assist the sustainable growth of biodiesel industry. [ABSTRACT FROM AUTHOR]