Search

In order to prevent the power switching devices (e.g., an insulated-gate bipolar transistor, IGBT) from shoot-through in voltage-source converters during a switching period, the dead time is added either in the hardware driver circuits of the IGBTs or implemented in software in pulse width modulation (PWM) schemes. Both solutions will contribute to a degradation of the injected current quality. As a consequence, the harmonics induced by the dead time (referred to as “dead-time harmonics” hereafter) have to be compensated in order to achieve a satisfactory current quality, as required by standards. In this paper, the emission mechanism of dead-time harmonics in single-phase PWM inverters is, thus, presented considering the modulation schemes in detail. More importantly, a repetitive controller has been adopted to eliminate the dead-time effect in single-phase grid-connected PWM converters. The repetitive controller has been plugged into a proportional-resonant-based fundamental-frequency current controller so as to mitigate the dead-time harmonics and also to maintain the control of the fundamental-frequency grid current in terms of dynamics. Simulations and experiments are provided, which confirm that the repetitive controller can effectively compensate the dead-time harmonics and other low-order distortions, and also, it is a simple method without hardware modifications. [ABSTRACT FROM AUTHOR]

This paper proposes a new control structure based on the parallel interconnection of a filtered repetitive controller and a resonant structure applied to uninterruptible power supplies — UPS. In particular, the filter in series with the repetitive controller adjusts the phase angle between resonant and repetitive loops, improving in this way the tracking performance. A particular filter structure is proposed, and an augmented state formulation is derived. Controller design is then carried out by the solution of an optimization problem with linear matrix inequalities constraints. Experimental results on a commercial 3.5kVA UPS illustrate the closed-loop performance. [ABSTRACT FROM AUTHOR]

The dc offset and scaling errors in the voltage measurements cause the injection of undesired dc and harmonic currents into the three-phase output currents of the grid-connected inverter. This study proposes an enhanced current control scheme to eliminate the dc and harmonic currents caused by voltage distortion and voltage measurement error in three-phase grid-connected inverters. The proposed current controller is designed in the synchronous (d-q ) reference frame and composed of a proportional resonant (PR) controller and a repetitive controller (RC). The role of the RC is to regulate the grid current follow the reference value as well as compensate all 6\rmn\omega {\rm{s}} and (6\rmn\pm 2)\omega{\rm{s}}\,(n= 1,\,2,\,3,\ldots) harmonic components caused by distorted grid voltage and scaling errors. Meanwhile, the PR controller helps to compensate the dc current generated by dc offset measurement errors to guarantee that the three-phase grid currents are balanced and sinusoidal with extremely low dc component. Since the RC employed in the proposed current controller reduces to time delay by four times compared to the conventional RC, the proposed control system ensures good steady-state performance of the grid current without deteriorating its fast dynamic response. The effectiveness of the suggested solution is verified by various experimental tests. [ABSTRACT FROM AUTHOR]

This paper investigates a combined resonant–repetitive (RR) control structure for a three-phase four-leg dc/ac converter power supply. The RR control configuration is composed by a resonant controller tuned at the system fundamental frequency working in conjunction with a plug-in-type repetitive controller. The resonant part of the control scheme is used to assure prompt tracking of the inverter output voltage and to achieve as fast as possible system response to load variations; to this purpose, it is tuned at the fundamental frequency. At the same time, the resonant controller is able to stabilize the system without the necessity of any further additional controller; the repetitive part of the scheme is implemented for the fine regulation at the system harmonic frequencies. The proposed control configuration is used to regulate the power supply output voltage, providing very good tracking of the output voltage reference even in the presence of a nonlinear load. Experimental validation from a 40-kVA converter prototype is presented to validate the operation of the proposed converter and control. [ABSTRACT FROM PUBLISHER]

Current control is a common feature in power electronics voltage source converters connected to the grid. In this scenario frequency drifts can entail a big loss in performance of these controllers, significantly worsening the quality of the power delivered to the grid. This article focuses on the study and implementation of current control algorithms for DC-AC voltage source converters (VSCs) that are able of both reducing the harmonic contents of the grid current and maintaining the selectivity of the current control against frequency drifts, so that the stability of the system is preserved. Two types of current control techniques are investigated here, namely, resonant and repetitive controllers. A thorough study of alternative implementation structures is carried out whilst spelling out the frequency-adaptive algorithm in each case. Besides, basic guidelines for their software implementation are given and the computational load for each alternative is analyzed. [ABSTRACT FROM AUTHOR]

This paper investigates the use of adaptive repetitive and resonant control approaches for the control of a single-phase hybrid cascaded multilevel converter designed to interface with power grids of highly distorted voltage waveform. The proposed repetitive/resonant control (RPC/RSC) is used for the extraction of clean phase angle, frequency, and magnitude information of the fundamental grid voltage together with the control of the converter current and mitigation of current harmonics under distorted grid voltage and variable frequency. The RPC time period and the RSC resonant frequency are updated adaptively using the estimated grid frequency while interpolation is used to preserve the RPC rejection capability under noninteger number of time steps per period. Detailed modeling and experimental investigation of the proposed control scheme are carried out. [ABSTRACT FROM AUTHOR]