Search

The transportation system has a big impact on daily lifestyle and it is essential to energy transition and decarbonization initiatives. Stabilizing the grid and incorporating sustainable energy sources require technologies like the Internet of Energy (IoE) and Internet of Vehicles (IoV). Electric vehicles (EVs) are essential for cutting emissions and reliance on fossil fuels. According to research on flexible charging methods, allowing EVs to trade electricity can maximize travel distances and efficiently reduce traffic. In order to improve grid efficiency and vehicle coordination, this study suggests an ideal method for energy trading in the Internet of Vehicles (IoV) in which EVs bid for electricity and Road Side Units (RSUs) act as buyers. The Taylor Social Optimization Algorithm (TSOA) is employed for this auction process, focusing on energy and pricing to select the best Charging Station (CS). The TSOA integrates the Taylor series and Social Optimization Algorithm (SOA) to facilitate flow redirection post-trading, evaluating each RSU's redirection factor to identify overloaded or underloaded CSs. The Flow-DNET model determines redirection policies for overloaded CSs. The TSOA + Flow-DNET approach achieved a pricing improvement of 0.816% and a redirection success rate of 0.918, demonstrating its effectiveness in optimizing electricity trading and flow management within the IoV framework. [ABSTRACT FROM AUTHOR]

Renewable energy sources (RESs) and energy storage schemes (ESSs) integrated into a microgrid (MG) system have been widely used in power generation and distribution to provide a constant supply of electricity. The power electronics converters, particularly the bidirectional power converters (BPCs), are promising interfaces for MG infrastructure because they control the power management of the whole MG system. The controller of BPCs can be designed using several different control strategies. However, all the existing controllers have system stability, dynamics, and power quality issues. Therefore, this study demonstrates the development of an LCL-filtered grid-connected bidirectional AC–DC converter's (BADC) control strategy based on voltage-oriented control (VOC) to overcome these issues. The proposed VOC-based inner current control loop (ICCL) is implemented in synchronous dq-coordinate with the help of proportional-integral (PI) controllers. An observer-based active damping (AD) is also developed in order to estimate the filter capacitor current from the capacitor voltage instead of directly measuring it. This developed AD system helps to damp the resonance effect of the LCL filter, improves system stability, and also eliminates the practical challenges of measuring capacitor current. The proposed controller with AD is able to realize bidirectional power transfer (BPT) with reduced power losses due to the elimination of passive damping and improved power quality, system dynamics, and stability. The mathematical modeling of the suggested system was developed, and the structure of the system model was established in the MATLAB/Simulink environment. The performance of the proposed system was validated with real-time software-in-the-loop (RT-SIL) simulation using the OPAL-RT simulator for a 16 kVA converter system. The real-time (RT) simulation results show that the BADC with the proposed control scheme can provide better dynamic performance and operate with tolerable total harmonic distortion (THD) of 2.62% and 2.71% for inverter and rectifier modes of operation, respectively. [ABSTRACT FROM AUTHOR]

Currently, the generation of energy relies primarily on the usage of harmful fossil fuels all over the world. New technologies, on the other hand, have enabled renewable energy resources to have a reduced environmental effect, greater long‐term sustainability, and, in some cases, to be cheaper than fossil fuels. Microgrids that use renewable resources can deliver low‐cost clean electricity while also improving local resiliency. They do, however, have certain issues in terms of regulating internal frequency and voltage within a microgrid, which is hampered by the intermittent nature of renewable sources. An islanded Microgrid for San Andres, Colombia has been designed for 24.57 kW peak load composed of a PV‐wind‐storage system by considering dispatch strategy based control in Homer Pro and assessed utilizing Simulink/MATLAB. Lastly, a PLC‐SCADA system along a HMI (Human‐Machine Interface) in C# was created to monitor the Microgrid in real‐time and produce an alarm as the microgrid elements are not operating within their ideal range of operational. The data from HMI is automatically uploaded to a cloud database. This work incorporates the dispatch control based techno‐economic design, assessment and a complete supervisory control strategy for an optimum microgrid. [ABSTRACT FROM AUTHOR]

The heterogeneous network (HetNet) is a specified cellular platform to tackle the rapidly growing anticipated data traffic. From a communications perspective, data loads can be mapped to energy loads that are generally placed on the operator networks. Meanwhile, renewable energy-aided networks offer to curtailed fossil fuel consumption, so to reduce the environmental pollution. This paper proposes a renewable energy based power supply architecture for the off-grid HetNet using a novel energy sharing model. Solar photovoltaics (PV) along with sufficient energy storage devices are used for each macro, micro, pico, or femto base station (BS). Additionally, a biomass generator (BG) is used for macro and micro BSs. The collocated macro and micro BSs are connected through end-to-end resistive lines. A novel-weighted proportional-fair resource-scheduling algorithm with sleep mechanisms is proposed for non-real time (NRT) applications by trading-off the power consumption and communication delays. Furthermore, the proposed algorithm with an extended discontinuous reception (eDRX) and power saving mode (PSM) for narrowband internet of things (IoT) applications extends the battery lifetime for IoT devices. HOMER optimization software is used to perform optimal system architecture, economic, and carbon footprint analyses while the Monte-Carlo simulation tool is used for evaluating the throughput and energy efficiency performances. The proposed algorithms are validated through the practical data of the rural areas of Bangladesh from which it is evident that the proposed power supply architecture is energy-efficient, cost-effective, reliable, and eco-friendly. [ABSTRACT FROM AUTHOR]

Growing demand of energy consumption, subsequent increase in energy generation costs, and increased greenhouse gas (GHG) emissions, as well as global warming from the conventional energy sources, encourages interest worldwide to bring a higher percentage of renewable energy sources such as biogas into the energy mix to build a climate friendly environment for the future. Moreover, due to high investment and maintenance costs, governments are not providing enough support for grid extension and delivering electricity to remote locations or rural areas, in particular, in under-developing countries like Bangladesh. Therefore, this paper presents an Energy Neutral Home System (ENHS) that can meet all its energy requirements from low-cost, locally available, nonpolluting biogas generated from animal waste, in particular, chicken and cow manure. The proposed ENHS has been developed for rural community, typically an area of 200 families, and will not only provide cooking gas and sustainable and affordable power supply to the community with low emissions, but will also facilitate high quality fertilizer for agricultural purposes. In-depth analysis clearly demonstrates that the proposed ENHS not only offers electricity and cooking gas to the community with the lowest costs, but also reduces the energy crisis and GHG emissions and can play an active role in developing socio-economic infrastructure of rural communities in Bangladesh in many ways. [ABSTRACT FROM AUTHOR]

The abundance, availability, and climate-friendly characteristics of solar photovoltaic (PV) energy encourage nations around the globe to adopt it to assist in overcoming global warming as well as build a sustainable society for the future. The intermittent nature of solar energy generation and the associated power electronic inverters with connected consumer loads creates a number of potential challenges in integrating large-scale PV into the grid that affects power quality of the distribution networks. This paper investigates the impacts of varying PV integration into the grid through experimental and simulation studies. Initially, several experiments were conducted with varying PV penetration and load conditions using the Renewable Energy Integration Facility at CSIRO, Newcastle, Australia. Later, a simulation model was developed that mimics the experimental facility used at CSIRO to investigate the adverse impacts on integrating large-scale PV into the grid using the power system simulation software PSS Sincal. Experimental and simulation analyses clearly indicate that integration of PV into the grid causes power quality issues such as voltage instability, harmonic injection, and low power factor into the networks and the level of these impacts increases with the increase of PV penetration. [ABSTRACT FROM AUTHOR]

Given the recent increasing public focus on climate change issues, the share of electricity generation by renewable energy resources is increasing day by day. Increased renewables share will give us robust, sustainable, and climate-friendly energy systems for the future. Renewable energy penetration with the current power systems needs substantial research, planning and development which are now the primary focus throughout the world. In this study, a global renewable energy scenario is explained in detail in contrast with India, considering a case study elucidating the comprehensive review of the Gujarat state in India. The primary focus is on Gujarat state's actions plans to pertain to harvest renewable energy and maximizing its share in the energy mix. This study examines the actions and the policies adopted by the Gujarat government to overcome the potential barriers in order to support non-conventional as well as renewable energy development. It also investigates the numerous techno-economic and social constraints with possible solutions in promoting the deployment of upcoming renewable energy resources across Gujarat. This study can be used as a guideline for the government, policymakers, utilities, stakeholders and researchers to promote an increased renewable energy share in Gujarat as well as at other places around the globe. [ABSTRACT FROM AUTHOR]