Search

In 100% renewable energy systems, the requirements for flexibility will be greater than for traditional carbon-based energy systems. New technologies and system setups are needed to provide flexibility for balancing the system. Implementing electricity storages in the energy system could provide parts of the required flexible demand and production, though most of these storage solutions have been shown to have relatively high costs. So-called Carnot batteries have been shown to have a relatively lower cost than traditional batteries, but at a reduced electric efficiency. This paper investigates to what extent large-scale integration of Carnot batteries has a role in the transition to and the operation of 100% renewable energy systems. By implementing Carnot batteries in a 100% renewable energy scenario for Denmark, the energy system effects are identified. The results indicate that the potential economic benefit could be as high as 60.5–66.2 EUR/MWh e discharged, not including costs related to investment as well as operation and maintenance of the Carnot batteries. Thus, large-scale integration of Carnot batteries must perform below this economic threshold to be economic relevant. Existing concepts for stand-alone Carnot batteries are not able to achieve these costs today, therefore solutions for cost reductions should be investigated. • Electricity storages could provide parts of future required system flexibility. • Most of these storage solutions have been shown to have relatively high costs. • Carnot batteries have a relatively lower costs but at reduced electric efficiency. • Large-scale integration of Carnot batteries is tested in a renewable energy system. • Carnot battery concepts should aim for a cost lower than 60.5–66.2 EUR/MWh e. [ABSTRACT FROM AUTHOR]

Future renewable energy systems with high shares of variable renewable energy production must also include technologies and measures to balance these production fluctuations. This could be in the form of electricity storage, energy demand adaptation (also known as demand-side management), or sector coupling. Industry electrification couples electricity and industry sectors by replacing the fossil fuel demand with electricity demands, thus enabling further integration of renewable electricity and transitioning the hard-to-abate energy sector. The effects of electrification on 100% renewable energy systems are rarely investigated. When investigated, one 100% renewable energy system scenario is used, which is often created by the same author, actor or organisation and may result in a narrow view of the possibilities for future energy systems. This study quantifies the role of industry electrification in the context of different 100% renewable energy system scenarios created by different relevant actors, to identify how its role may differ based on the scenario investigated. It is found that direct electrification of industrial process heat demands should be favoured over, e.g., a fuel shift to hydrogen-based process systems, even when these provide more flexibility. • Future renewable energy systems must balance variable production fluctuations. • Industry electrification enables integration of renewable electricity. • Industry electrification is analysed in three renewable energy system scenarios. • Direct electrification should be favoured over hydrogen-based process systems. [ABSTRACT FROM AUTHOR]

This paper addresses economic aspects of heat savings in the context of strategic heat planning. The analysis uses the city of Aalborg, Denmark, as a case where municipalisation through a recent acquisition of a coal-fired cogeneration of heat and power (CHP) plant has made an update of a municipal strategic energy plan necessary. Combining datasets on buildings and insulation techniques with economic methods, we investigate how the local district heating tariff can be adapted to improve the conditions for heat savings and support the transition to lower supply temperatures in line with the requirements of future fourth generation district heating systems. The paper concludes that implementing a fully variable heat tariff scheme improves the financial incentive for heat savings, while also making the system development less vulnerable to fluctuations and shortages in capital markets. The paper supplements existing literature on heat savings with novelty in its approach and in its systematic investigation of the interplay between tariff policies and interest rates. [ABSTRACT FROM AUTHOR]

Abstract The transition to a 100% renewable energy system based on variable renewable energy raises technical but also institutional questions. The smart energy system concept integrates variable renewable energy by addressing the technical challenges through the integration of different energy sectors, but integration of variable renewable energy also entails a change in the cost structures, especially related to electricity. The effect of this change in cost structures on market prices is investigated. This is done through simulation of a 100% renewable energy system that utilises a large degree of cross-sector integration but maintaining the current electricity market structure. The paper uses a 100% renewable energy system scenario for a 2050 Danish energy system. This is reflected in the use of wind energy as the primary renewable energy source. It is concluded that the current electricity market structure is not able to financially sustain the amounts of wind power necessary for the transition to a 100% renewable energy system. Since earlier research shows that neither electricity production costs nor the total system costs is higher for the renewable path than the fossil-based alternatives, the conclusion in this paper points towards a need for reshaping the institutional structure of electricity trade. Highlights • Calculates electricity prices in a renewable energy system with current market design. • Calculates private profitability of wind power investments within such system. • The market design cannot financially sustain wind power in a renewable energy system. [ABSTRACT FROM AUTHOR]

Moving towards carbon-neutral societies, both nuclear and renewable energy can potentially supply CO 2 -free electricity. While the cost of renewable energy has decreased significantly, the cost of nuclear has, however, increased in the past decades and now in general exceeds the cost of renewables. However, one cannot compare directly the per unit cost of electricity since temporal behavior in the electricity production differs substantially between the two groups of technologies. Nuclear power inherently aims to provide a constant base load supply of electricity, while renewables generally depend on weather patterns. Thus, the two have different requirements and impact the overall system costs differently regarding flexibility and system design. Focusing on the case of Denmark, this article investigates a future fully sector-coupled energy system in a carbon-neutral society and compares the operation and costs of renewables and nuclear-based energy systems. The study finds that investments in flexibility in the electricity supply are needed in both systems due to the constant production pattern of nuclear and the variability of renewable energy sources. However, the scenario with high nuclear implementation is 1.2 billion EUR more expensive annually compared to a scenario only based on renewables, with all systems completely balancing supply and demand across all energy sectors in every hour. For nuclear power to be cost competitive with renewables an investment cost of 1.55 MEUR/MW must be achieved, which is substantially below any cost projection for nuclear power. • Both renewable energy and nuclear power benefits from sector coupling. • Hourly modelling is required to capture system effects. • Nuclear systems require less flexibility capacity than renewable only systems. • A renewable energy system is cheaper than a nuclear based system. • Lower flexibility costs do not offset the high investment costs in nuclear energy. [ABSTRACT FROM AUTHOR]

Decarbonising the heating sector is one of the key elements to realizing the ambitious dual carbon goals of China, which is the largest carbon emitter and energy consumer globally. Currently, district heating (DH) systems have penetrated approximately 88% of the urban heating areas in Northern China. Nevertheless, around 90% of the heating demand in China still relies on fossil fuels. A larger scale integration of renewable energy and waste heat sources into the DH systems is critical for decarbonising the entire heating sector in China. However, a deeper level of comprehension is required to harness its full potential. This paper provides a thorough investigation of the status, potential, and national policy schemes of renewable energy and waste heat recovery in the DH systems of China. Combined with a critical review of recent literature on relevant areas published in both international and Chinese domestic sources, the trends, challenges, and future perspectives are discussed from scientific research and practical implementation aspects. This paper highlights the synergy of the integration of renewable energy and waste heat sources in DH, the energy efficiency improvements as well as the use of thermal storage technologies through the implementation of 4th generation district heating and smart energy systems that could offer a more economically viable pathway forward. • Focus on renewable energy and waste heat (REWH) in the district heating (DH) systems in China. • A systematic review of REWH in Chinese DH systems from status, policy, and literature aspects. • Identification of research gaps based on the review of both international and Chinese journals. • Policy recommendations proposed to promote REWH in Chinese DH systems. • The introduction of international experiences on REWH in DH for analysis in the Chinese context. [ABSTRACT FROM AUTHOR]