Search

High-gravity (HG) technology aims at generating final ethanol concentrations above 50 kg m(-3) in order to reduce the cost of the distillation step. The generation of higher amounts of inhibitors during the pretreatment step is one of the challenges that accompany the increase in initial dry matter. Detoxification of spruce hydrolysate, adaptation of the cells before fermentation, supplementation with nutrients, and washing of solids were the strategies compared in this study. They represent different approaches to cope with the inhibitory effects, and we compared their efficiencies using a thermotolerant strain of Saccharomyces cereuisiae at temperatures from 30 degrees C up to 40 degrees C. The dilute acid-pretreated spruce used as substrate in this study was not fermentable under HG conditions (200 g kg(-1) water-insoluble solids) when no improvement method was applied. In HG simultaneous saccharification and fermentation at 30 degrees C combined with a 24 h pre-hydrolysis step, the detoxification of pretreated spruce with reducing agent (Na2S2O4) gave the best result with an ethanol yield of 57% (on total sugars) of the maximum theoretical and a volumetric productivity of 1.58 g dm(-3) h(-1). In HG separate hydrolysis and fermentation, nutrients supplementation gave better final ethanol yields than detoxification of the material, reaching an ethanol yield of about 60% of the theoretical (on total sugars). The results obtained, showed an increase in severity of inhibitory effects with temperature increase. Improved cell viability was observed when detoxified material was used and also when yeast extract addition was coupled with adaptation of the cells to the hydrolysate. (C) 2014 Published by Elsevier Ltd.

Background Development of more sustainable biofuel production processes is ongoing, and technology to run these processes at a high dry matter content, also called high-gravity conditions, is one option. This paper presents the results of a life cycle assessment (LCA) of such a technology currently in development for the production of bio-ethanol from spruce wood chips. Results The cradle-to-gate LCA used lab results from a set of 30 experiments (or process configurations) in which the main process variable was the detoxification strategy applied to the pretreated feedstock material. The results of the assessment show that a process configuration, in which washing of the pretreated slurry is the detoxification strategy, leads to the lowest environmental impact of the process. Enzyme production and use are the main contributors to the environmental impact in all process configurations, and strategies to significantly reduce this contribution are enzyme recycling and on-site enzyme production. Furthermore, a strong linear correlation between the ethanol yield of a configuration and its environmental impact is demonstrated, and the selected environmental impacts show a very strong cross-correlation (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r^2>0.9$$\end{document}r2>0.9 in all cases) which may be used to reduce the number of impact categories considered from four to one (in this case, global warming potential). Lastly, a comparison with results of an LCA of ethanol production under high-gravity conditions using wheat straw shows that the environmental performance does not significantly differ when using spruce wood chips. For this comparison, it is shown that eutrophication potential also needs to be considered due to the fertilizer use in wheat cultivation. Conclusions The LCA points out the environmental hotspots in the ethanol production process, and thus provides input to the further development of the high-gravity technology. Reducing the number of impact categories based only on cross-correlations should be done with caution. Knowledge of the analyzed system provides further input to the choice of impact categories. Electronic supplementary material The online version of this article (doi:10.1186/s13068-016-0468-3) contains supplementary material, which is available to authorized users.

Second-generation bioethanol produced from various lignocellulosic materials, such as wood, agricultural, or forest residues, has the potential to be a valuable substitute for, or a complement to, gasoline. At least three major factors—rapidly increasing atmospheric CO2 levels, dwindling fossil fuel reserves, and their rising costs—suggest that we now need to accelerate research plans to make greater use of plant-based biomass for energy production and as a chemical feedstock as part of a sustainable energy economy. Optimizing the production of bioethanol to be competitive with petrochemical fuels is the main challenge for the underlying process development. The exhaustive research on enzyme technology during the latest years, resulting in significant advances in the field, show the importance of the enzymatic hydrolysis for a profitable ethanol production process. On the other hand, the persisting challenges in biomass pretreatment, which are the initial steps in most process designs, show the remarkable recalcitrance of the lignocellulosic materials to biological degradation. The recent scientific trends show toward an integrated overall bioconversion process in which fermentation technology and genetic engineering of ethanologenic microorganisms aim not only at maximizing yields and productivities but also at widening the range of fermentation products and applications.

BACKGROUND: The high crystallinity of cellulose underlies the recalcitrance that this polymer presents in enzymatic degradation. Thus, a pre-treatment step is applied in most bioconversion processes. Treatments with ionic liquids are considered an emerging pre-treatment technology, owing to their high efficiency in solvating cellulose, over molecular solvent systems. RESULTS: Crystalline cellulose with and without ionic liquid (1-ethyl-3-methylimidazolium acetate) treatment, both commercially available, were used as substrates in enzymatic hydrolysis reactions using the earlier evaluated cellulolytic system of Fusarium oxysporum. The in situ removal of the hydrolysate during reactions enhanced the reaction rate as well as the overall glucose production. Ionic liquid treatment significantly decreased cellulose crystallinity and enhanced bioconversion yields and rates. The effects of cellulose structural changes during treatment on hydrolysis rate were investigated and the recalcitrance constants were determined. CONCLUSION: The study showed that ionic liquid-treated cellulose became more homogeneous and more easily degradable than the untreated cellulose, a conclusion that was expressed mathematically by the difference in the recalcitrance constants for the two substrates. It was concluded that glucose production from ionic liquid-treated cellulose could achieve very high conversion yields in consolidated bioprocesses or during simultaneous saccharification and fermentation. Copyright © 2012 Society of Chemical Industry

The enzymatic degradation of polysaccharides to monosaccharides is an essential step in bioconversion processes of lignocellulosic materials. Alkali treated brewers spent grain was used as a model substrate for the study of cellulose and hemicellulose hydrolysis by Fusarium oxysporum enzyme extract. The results obtained showed that cellulose and hemicellulose conversions are not affected by the same factors, implementing different strategies for a successful bioconversion. Satisfactory cellulose conversion could be achieved by increasing the enzyme dosage in order to overcome the end-product inhibition, while the complexity of hemicellulose structure imposes the presence of specific enzyme activities in the enzyme mixture used. All the factors investigated were combined in a mathematical model describing and predicting alkali treated brewers spent grain conversion by F. oxysporum enzyme extract.

BACKGROUND: During the pretreatment of lignocellulosic materials, molecules such as carboxylic acids, furan derivatives and phenolic compounds, which inhibit the growth and ethanol fermentation by bacteria, fungi and yeasts, are produced. The present work determines the tolerance levels of the C5, C6 fermenting fungus Fusarium oxysporum, towards individual model inhibitory compounds on aerobic growth, on lignocellulolytic activities and on fermentative performance. RESULTS During the growth stage, maximum biomass production was more affected than the specific growth rate by the presence of inhibitors. The presence of high concentrations of inhibitors resulted, in most cases, in prolongation of the lag phase. The fermentative performance of F. oxysporum was significantly inhibited by carboxylic acids, while the lignocellulolytic activities were affected to a lesser extent. CONCLUSION: The toxicity tolerance of fF. oxysporum was high enough for aerobic growth in the presence of significant concentrations of inhibitors, which in most cases were higher than those generated from various treatments of lignocellulosic materials, while its fermentative performance was relatively more affected by the presence of inhibitors. The decrease of ethanol production in the presence of weak organic acids could be the main obstacle to the application of F. oxysporum in large-scale bioconversion processes of hydrolysates containing inhibitors. Copyright © 2010 Society of Chemical Industry

In this study, the ethanol production by the mesophilic fungus Neurospora crassa from BG was studied and optimized concerning the induction of lignocellulose degrading enzymes and the production phase as well. The production of cellulolytic and hemicellulolytic enzymes was studied under solid-state cultivation (SSC). SSC in a laboratory horizontal bioreactor using the optimized medium, WS and BG in the ratio 1:1 and initial moisture level 61.5%, allowed the large scale production of the multienzymatic system. Similar yields with those from flasks experiments, as high as 1073,56,4.2,1.6,3.1,5.7 and 0.52 U g(-1) carbon source of xylanase, endoglucanase, cellobiohydrolase, beta-glucosidase, alpha-l-arabinofuranosidase, acetyl esterase and feruloyl esterase, respectively, were obtained. Chromogenic (fluorogenic) 4-methylumbelliferyl substrates were used to characterize the major activities of the multienzyme component, after the separation by isoelectric focusing (IEF) electrophoresis. Alkali pre-treated BG was used for ethanol production. A yield of about 74 g of ethanol kg(-1) dry BG (5,6 g L(-1)) was obtained under optimum conditions (aeration 0.1 vvm, pre-treatment with 1g NaOH 10 g(-1)dry BG).

In this study, the factors affecting ferulic acid (FA) release from Brewer’s spent grain (BSG), by the crude enzyme extract of Fusarium oxysporum were investigated. In order to evaluate the importance of the multienzyme preparation on FA release, the synergistic action of feruloyl esterase (FAE, FoFaeC-12213) and xylanase (Trichoderma longibrachiatum M3) monoenzymes was studied. More than double amount of FA release (1 mg g−1 dry BSG) was observed during hydrolytic reactions by the crude enzyme extract compared to hydrolysis by the monoenzymes (0.37 mg g−1 dry BSG). The protease content of the crude extract and the inhibitory effect of FA as an end-product were also evaluated concerning their effect on FA release. The protease treatment prior to hydrolysis by monoenzymes enhanced FA release about 100%, while, for the first time in literature, FA in solution found to have a significant inhibitory effect on FAE activity and on total FA release.

Background Brewer's spent grain (BG), a by-product of the brewing process, is attracting increasing scientific interest as a low-cost feedstock for many biotechnological applications. BG in the present study is evaluated as a substrate for lignocellulolytic enzyme production and for the production of ethanol by the mesophilic fungus Fusarium oxysporum under submerged conditions, implementing a consolidated bioconversion process. Fermentation experiments were performed with sugar mixtures simulating the carbohydrate content of BG in order to determine the utilization pattern that could be expected during the fermentation of the cellulose and hemicellulose hydrolysate of BG. The sugar mixture fermentation study focused on the effect of the initial total sugar concentration and on the effect of the aeration rate on fermenting performance of F. oxysporum. The alkali pretreatment of BG and different aeration levels during the ethanol production stage were studied for the optimization of the ethanol production by F. oxysporum. Results Enzyme yields as high as 550, 22.5, 6.5, 3225, 0.3, 1.25 and 3 U per g of carbon source of endoglucanase, cellobiohydrolase, β-D-glucosidase, xylanase, feruloyl esterase, β-D-xylosidase and α-L-arabinofuranosidase respectively, were obtained during the growth stage under optimized submerged conditions. An ethanol yield of 109 g ethanol per kg of dry BG was obtained with alkali-pretreated BG under microaerobic conditions (0.01 vvm), corresponding to 60% of the theoretical yield based on total glucose and xylose content of BG. Conclusion The enzymatic profile of the extracellular extract from F. oxysporum submerged cultures using BG and corn cob as the carbon source was proved efficient for a successful hydrolysis of BG. The fermentation study carried out using sugar mixtures simulating BG's carbohydrates content and consecutively alkali-pretreated and untreated BG, indicates that BG hydrolysis is the bottleneck of the bioconversion process. However, a considerable bioconversion yield was achieved (60% of the theoretical) making this bioprocess worthy of further investigation for a potential commercial application.