Search

One of the main goals of the National Aeronautics and Space Administration (NASA) Global Precipitation Measurement (GPM) mission is to retrieve parameters of the raindrop size distribution (DSD) globally. As a standard product of the Dual-Frequency Precipitation Radar (DPR) on board the GPM Core Observatory satellite, the mass-weighted mean diameter Dm and the normalized intercept parameter Nw are estimated in three dimensions at the resolution of the radar. These are two parameters of the three-parameter gamma model DSD adopted by the GPM algorithms. This study investigates the accuracy of the Dm retrieval through a comparative study of C-band ground radars (GRs) and GPM products over Italy. The reliability of the ground reference is tested by using two different approaches to estimate Dm. The results show good agreement between the ground-based and spaceborne-derived Dm, with an absolute bias being generally lower than 0.5 mm over land in stratiform precipitation for the DPR algorithm and the combined DPR–GMI algorithm. For the DPR–GMI algorithm, the good agreement extends to convective precipitation as well. Estimates of Dm from the DPR high-sensitivity (HS) Ka-band data show slightly worse results. A sensitivity study indicates that the accuracy of the Dm estimation is independent of the height above surface (not shown) and the distance from the ground radar. On the other hand, a nonuniform precipitation pattern (interpreted both as high variability and as a patchy spatial distribution) within the DPR footprint is usually associated with a significant error in the DPR-derived estimate of Dm. [ABSTRACT FROM AUTHOR]

Volcanic activity is observed worldwide with a variety of ground and space-based remote sensing instruments, each with advantages and drawbacks. No single system can give a comprehensive description of eruptive activity, and so, a multi-sensor approach is required. This work integrates infrared and microwave volcanic ash retrievals obtained from the geostationary Meteosat Second Generation (MSG)-Spinning Enhanced Visible and Infrared Imager (SEVIRI), the polar-orbiting Aqua-MODIS and ground-based weather radar. The expected outcomes are improvements in satellite volcanic ash cloud retrieval (altitude, mass, aerosol optical depth and effective radius), the generation of new satellite products (ash concentration and particle number density in the thermal infrared) and better characterization of volcanic eruptions (plume altitude, total ash mass erupted and particle number density from thermal infrared to microwave). This approach is the core of the multi-platform volcanic ash cloud estimation procedure being developed within the European FP7-APhoRISM project. The Mt. Etna (Sicily, Italy) volcano lava fountaining event of 23 November 2013 was considered as a test case. The results of the integration show the presence of two volcanic cloud layers at different altitudes. The improvement of the volcanic ash cloud altitude leads to a mean difference between the SEVIRI ash mass estimations, before and after the integration, of about the 30%. Moreover, the percentage of the airborne "fine" ash retrieved from the satellite is estimated to be about 1%-2% of the total ash emitted during the eruption. Finally, all of the estimated parameters (volcanic ash cloud altitude, thickness and total mass) were also validated with ground-based visible camera measurements, HYSPLIT forward trajectories, Infrared Atmospheric Sounding Interferometer (IASI) satellite data and tephra deposits. [ABSTRACT FROM AUTHOR]

Microphysical and dynamical features of volcanic tephra due to Plinian and sub-Plinian eruptions can be quantitatively monitored by using ground-based microwave weather radars. The methodological rationale and unique potential of this remote-sensing technique are illustrated and discussed. Volume data, acquired by ground-based weather radars, are processed to automatically classify and estimate ash particle concentration and fallout. The physical- statistical retrieval algorithm is based on a backscattering microphysical model of fine, coarse, and lapilli ash particles, used within a Bayesian classification and optimal estimation methodology. The experimental evidence of the usefulness and limitations of radar acquisitions for volcanic ash monitoring is supported by describing several case studies of volcanic eruptions all over the world. The radar sensitivity due to the distance and the system noise, as well as the various radar bands and configurations (i.e., Doppler and dual polarized), are taken into account. The discussed examples of radar-derived ash concentrations refer to the case studies of the Augustine volcano eruption in 2002, observed in Alaska by an S-band radar; the Grímsvötn volcano eruptions in 2004 and 2011, observed in Iceland by C- and X-band weather radars and compared with in situ samples; and the Mount Etna volcano eruption in 2011, observed by an X-band polarimetric radar. These applications demonstrate the variety of radar-based products that can be derived and exploited for the study of explosive volcanism. [ABSTRACT FROM AUTHOR]

Radar-rainfall estimation is a complex process that involves several error sources, some of which are related to the environmental context. The presence of orographic obstacles heavily affects the quality of the retrieved radar products. In relatively flat terrain conditions, dual-polarization capability has been proven either to increase the data quality or to improve the rainfall estimate. The potential benefit of using polarimetric techniques for precipitation retrieval is evaluated here using data coming from two radar systems operating in Italy under complex-orography conditions. The analysis outlines encouraging results that might open new scenarios for operational applications. Indeed, the applied rainfall algorithm employing specific differential phase mostly outperformed the examined reflectivity-based retrieval techniques except for the analyzed winter storm. In the latter case, the likely contamination by frozen or melting snow tended to degrade the performance of the examined Kdp-based rainfall algorithms. [ABSTRACT FROM AUTHOR]

Recent research has demonstrated the value of polarimetric measurements for the correction of rain-path attenuation at X-band radar frequency and the estimation of rain parameters including drop-size distributions (DSD). The issue this paper is concerned with is to what degree uncertainties in attenuation correction can affect the estimation of DSD. Since attenuation-correction uncertainty enhances with rain path, our hypothesis is that DSD retrieval uncertainty at X-band may deteriorate with range. In this paper, we evaluate the relative accuracy of X-band DSD retrieval against DSD estimates from S-band radar observations and in situ disdrometer spectra. We present comparisons of various techniques for estimating DSD model parameters from attenuation-corrected X-band dual-polarization radar data. Coincident X-band polarimetric-radar (XPOL) and S-band polarimetric-radar dual-polarized radar measurements from the International H2O Project experiment as well as coincident XPOL (MP-X) measurements over disdrometer during a typhoon storm case in Japan are used to assess the accuracy of the different DSD retrieval algorithms applied to X-band radar measurements. [ABSTRACT FROM AUTHOR]

Hydrometeorological and radio propagation applications can benefit from the capability to model the time evolution of raindrop size distribution (RSD). A new stochastic vector autoregressive semi-Markov model is proposed to randomly synthesize (generate) the temporal series of the three driving parameters of a normalized Gamma RSD. Rainfall intermittence is reproduced through a discrete semi-Markov process, modeled from disdrometer measurements using two-state analytical statistics of rain and dry period duration. The overall model is set up by means of a large set of disdrometer measurements, collected from 2003 to 2005 at Chilbolton, U.K. The driving parameters of the retrieved RSD are estimated using three approaches: the Gamma moment method and the 1-D and 3-D maximum-likelihood methods. Interestingly, these methodologies lead to quite different results, particularly when one is interested in evaluating RSD higher order moments such as the rain rate. The accuracy of the proposed RSD time-series generation technique is evaluated against available disdrometer measurements, providing excellent statistical scores. [ABSTRACT FROM AUTHOR]

In this paper, a Bayesian statistical approach for supervised classification and estimation of hydrometeors, using a C-band polarimetric radar, is presented and discussed. The Bayesian Radar Algorithm for Hydrometeor Classification at C-band (BRAHCC) is supervised by a backscattering microphysical model, aimed at representing ten different hydrometeor classes in water, ice, and mixed phase. The expected error budget is evaluated by means of contingency tables on the basis of C-band radar noisy and attenuated synthetic data. Its accuracy is better than that obtained from a previously developed fuzzy logic C-band classification algorithm. As a second step of the overall retrieval algorithm, a multivariate regression is adopted to derive water content statistical estimators, exploiting simulated polarimetric radar data for each hydrometeor class. The BRAHCC methodology is then applied to a convective hail event, observed by two C-band dual-polarized radars in a network configuration. The hydrometeor classification along the line of sight, connecting the two C-band radars, is performed using the BRAHCC applied to path-attenuation-corrected data. Qualitative results are consistent with those derived from the fuzzy logic algorithm. Hydrometeor water content temporal evolution is tracked along the radar line of sight. Hail vertical occurrence is derived and compared with an empirical hail detection index applied along the radar connection line during the whole event. [ABSTRACT FROM AUTHOR]

Operating a meteorological radar is generally a challenging task when in presence of a significant beam blockage as in complex orography. Apart from enhanced ground clutter, mountainous obstructions of the radar beam can significantly reduce the radar visibility and, thus, its monitoring capabilities. Self-consistent adaptive techniques to reconstruct vertical profiles of reflectivity (VPR) and near-surface rain-rate fields' from high-elevation reflectivity bins are here proposed, compared, and tested for ranges up to 60 km. The methodology is based on statistical estimators trained by a large reflectivity volumetric datasets, classified into stratiform and convective rain regimes and resampled onto a uniform Cartesian grid by means of a modified Cressman technique. For what concerns reflectivity vertical profiles, two methods, respectively named statistical nonlinear reconstruction (NSR) and neural network reconstruction (NNR), are considered. The NSR method is based on the principal component analysis, applied to the radar dataset, in order to extract significant reflectivity-profile variance. A retrieval technique, based on a nonlinear multiple regression scheme, is then used to infer near-surface reflectivity from available high-altitude echoes at a given range. The NNR is based on a three-layer artificial neural network trained by means a feed forward backpropagation algorithm. For what concerns the near-surface rain retrieval, besides a power-law reflectivity-rain-rate (ZR) approach, a three-layer neural network technique is also set up in order to estimate surface rain rate from reconstructed VPR. The proposed reconstruction techniques are here illustrated by using volumetric data acquired by the C-band Doppler single-polarization radar, operated in L'.Aquila, Italy. A case study, related to a rainfall event that occurred during fall 2000, is discussed. Using a test area within 60 km from the radar site and simulating the presence of beam obstructions, a comparison of NSR and NNR with conventional area average reconstruction techniques shows that the percentage improvement of both NSR and NNR approaches is significant, both for the error bias (by 30% to more than 50%, depending on attitude) and variance (by 10% to more than 20%). A sensitivity test indicates that the VPR reconstruction procedure is fairly robust to missing data, especially in terms of error bias. The comparison of estimated radar rainfall with rain gauge data measurement is also illustrated. The mean field bias closer to its optimal value and an error variance much smaller is obtained when neural network techniques are applied than with conventional ZR methods for both techniques of reconstruction. With respect to the latter, the obtained improvement is more than 40% in terms of root mean square error and is comparable when estimating near-surface rain rate using either NSR or NNR methods to reconstruct the reflectivity vertical profiles. Limitations, potential, and future developments of the proposed adaptive reconstruction techniques are finally discussed. [ABSTRACT FROM AUTHOR]

In this paper, precipitation estimates derived from the Italian ground radar network (IT GR) are used in conjunction with Spinning Enhanced Visible and InfraRed Imager (SEVIRI) measurements to develop an operational oriented algorithm (RAdar INfrared Blending algorithm for Operational Weather monitoring (RAINBOW)) able to provide precipitation pattern and intensity. The algorithm evaluates surface precipitation over five geographical boxes (in which the study area is divided). It is composed of two main modules that exploit a second-degree polynomial relationship between the SEVIRI brightness temperature at 10.8 µm TB10.8 and the precipitation rate estimates from IT GR. These relationships are applied to each acquisition of SEVIRI in order to provide a surface precipitation map. The results, based on a number of case studies, show good performance of RAINBOW when it is compared with ground reference (precipitation rate map from interpolated rain gauge measurements), with high Probability of Detection (POD) and low False Alarm Ratio (FAR) values, especially for light to moderate precipitation range. At the same time, the mean error (ME) values are about 0 mmh−1, while root mean square error (RMSE) is about 2 mmh−1, highlighting a limited variability of the RAINBOW estimations. The precipitation retrievals from RAINBOW have been also compared with the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT) Satellite Application Facility on Support to Operational Hydrology and Water Management (H SAF) official microwave (MW)/infrared (IR) combined product (P-IN-SEVIRI). RAINBOW shows better performances than P-IN-SEVIRI, in terms of both detection and estimates of precipitation fields when they are compared to the ground reference. RAINBOW has been designed as an operational product, to provide complementary information to that of the national radar network where the IT GR coverage is absent, or the quality (expressed in terms of Quality Index (QI)) of the RAINBOW estimates is low. The aim of RAINBOW is to complement the radar and rain gauge network supporting the operational precipitation monitoring. [ABSTRACT FROM AUTHOR]

Recently, the interest on snowfall remote sensing and quantitative precipitation estimation is becoming a popular topic by both the scientific and operational communities. As a matter of fact, snow plays a key role in the hydrological cycle and Earth energy budget and clearly represents a meteorological hazard that can seriously compromise human activities and properties. In this study, we used a dual-polarization X-band weather radar to quantify the near-surface liquid equivalent snowfall rate, proposing a new parameterization based on the use of radar reflectivity factor and specific differential phase shift. This effort adds to several recent works, mainly focused on S-band weather radar systems, demonstrating that the use of the radar specific differential phase shift (K dp) is able to enhance the estimation precision with respect to the more customary approaches making use of radar reflectivity factor alone. To demonstrate this concept also at X-band, some case studies were collected from December 2018 to May 2019 in the Southern Apennine Mountains in the area of Naples (Italy). They were used to compare the proposed radar based liquid equivalent snowfall rate estimations, based on Z and K dp , with reference laser-optical disdrometer time series collected in the close reference site of Montevergine observatory. Findings show that also at X band the use of K dp produces a better score between the radar-derived liquid equivalent snowfall rate and the reference one from the disdrometer. • The use of specific differential phase shift improves the radar-based estimation of snowfall rate. • Snow estimators based on equivalent radar reflectivity factor can be corrupted by melting layer effects. • In snow conditions, strong horizontal winds can corrupt laser-optical disdrometer measurements. [ABSTRACT FROM AUTHOR]