Search

In light of the proposed space segment of Europe's future CO2 monitoring system, we investigate the spectral resolution of the CO2 spectrometer, which measures earthshine radiance in the three relevant spectral bands at 0.76, 1.61, and 2.06 µm. The Orbiting Carbon Observatory-2 (OCO-2) mission covers these bands with fine spectral resolution but limited spatial coverage, which hampers the monitoring of localized anthropogenic CO2 emission. The future European CO2 monitoring constellation, currently undergoing feasibility studies at the European Space Agency (ESA), is targeting a moderate spectral resolution of 0.1, 0.3, and 0.3–0.55 nm in the three spectral bands with a high signal-to-noise ratio (SNR) as well as a spatial resolution of 4 km2 and an across-track swath width >250 km. This spectral and radiometric sizing is deemed to be favorable for large-swath imaging of point sources of CO2 emission. To assess this choice, we use real and synthetic OCO-2 satellite observations, which we spectrally degrade to the envisaged lower spectral resolution. We evaluate the corresponding CO2 retrieval accuracy by taking the Total Carbon Column Observing Network (TCCON) observations as reference. Here, a lower spectral resolution enhances the scatter error of the retrieved CO2 column mixing ratio (XCO2) but has little effect on the station-to-station variation in the biases. We show that the scatter error gradually increases with decreasing spectral resolution. Part of the scatter error increase can be attributed to the retrieval noise error which can be compensated for by a future instrument with improved SNR. Moreover, we consider the effect of the reduced spectral resolution on the capability to capture regional XCO2 variations and XCO2 plumes from selected OCO-2 orbits. The investigation using measurements from the Greenhouse gases Observing SATellite (GOSAT) and synthetic measurements confirms our finding and indicates that one major source of uncertainties regarding CO2 retrieval is the insufficient information on aerosol properties that can be inferred from the observations. We hence recommend the implementation of simultaneous, co-located measurements that have a larger information content on aerosols with an auxiliary instrument in the future European observing system.

Passive remote sensing of atmospheric carbon dioxide uses spectroscopic measurements of sunlight backscattered by the Earth's surface and atmosphere. The current state-of-the-art retrieval methods use three different spectral bands, the oxygen A band at 0.76 µm and the weak and strong CO2 absorption bands at 1.61 and 2.06 µm, respectively, to infer information on light scattering and the carbon dioxide column-averaged dry-air mole fraction XCO2. In this study, we propose a one-band XCO2 retrieval technique which uses only the 2.06 µm band measurements from the Orbiting Carbon Observatory-2 (OCO-2) satellite. We examine the data quality by comparing the OCO-2 XCO2 with collocated ground-based measurements from the Total Carbon Column Observing Network (TCCON). Over land and ocean the OCO-2 one-band retrieval shows differences from TCCON observations with a standard deviation of ∼1.30 ppm and a station-to-station variability of ∼0.50 ppm. Moreover, we compare one-band and three-band retrievals over Europe, the Middle East, and Africa and see high correlation between the two retrievals with a SD of 0.93 ppm. Compared to the three-band retrievals, XCO2 retrievals using only the 2.06 µm band have similar retrieval accuracy, precision, and data yield.

SPEXone is a Multi-Angle Polarimeter instrument that is baselined to fly on the NASA Plankton, Aerosol, Cloud, and ocean Ecosystem (PACE) mission, to be launched in 2022. It will perform hyper-spectral measurements of radiance and polarization in the spectral range 385–770 nm at 5 viewing angles ( ± 57o, ± 20o, 0o) with high accuracy (0.003) on the Degree of Linear Polarization (DoLP). Based on linear error analysis and retrievals on synthetic data, we conclude that SPEXone has the capability to significantly advance the accuracy of retrievals of optical and microphysical aerosol properties compared to past, present, and planned satellite instruments, as required for better quantification of the effect of aerosols on climate. The products that SPEXone will provide are Aerosol Optical Depth (AOD), Single Scattering Albedo (SSA), Aerosol Layer Height (ALH), effective radius, effective variance, complex refractive index, particle number column for both the fine and coarse mode as well as a shape parameter for the coarse mode. PACE will carry two other instrument: the Ocean Color Instrument (OCI) which is the main instrument and the Hyper-Angular Rainbow Polarimeter-2 (HARP-2). The synergistic use of SPEXone with these instruments will further increase retrieval accuracy, in particular for coarse mode parameters and absorption, and will provide unprecedented capability for aerosol above cloud retrievals.

Passive remote sensing of atmospheric carbon dioxide uses spectroscopic measurements of sunlight back-scattered by the Earth's surface and atmosphere. The current state-of-the-art retrieval methods use three different spectral bands, the oxygen A band at 0.76 μm and the weak and strong CO2 absorption bands at 1.61 and 2.06 μm, respectively, to infer information on light scattering and the carbon dioxide column-averaged dry-air mole fraction XCO2. In this study, we propose a one-band XCO2 retrieval technique which uses only the 2.06 μm band measurements from the OCO-2 satellite. We examine the data quality by comparing the OCO-2 XCO2 with collocated ground based measurements from the Total Carbon Column Observing Network (TCCON). Over land and ocean the OCO-2 one-band retrieval shows differences to TCCON observations with a standard deviation of ~ 1.30 ppm and a station-to-station variability of ~ 0.50 ppm. Moreover, we compare one-band and three-band retrievals over Europe,the Middle East and Africa region and see high correlation between the two retrievals with a SD of 0.93 ppm. Compared to the three-band retrievals, using only the 2.06 μm band similar XCO2 retrieval accuracy and precision can be obtained while retaining a similar data yield.

We demonstrate that multi-angle polarization measurements in the near-UV and blue part of the spectrum are very well suited for passive remote sensing of aerosol layer height. For this purpose we use simulated measurements with different set-ups (different wavelength ranges, with and without polarization, different polarimetric accuracies) as well as airborne measurements from the Research Scanning Polarimeter (RSP) obtained over the continental USA. We find good agreement of the retrieved aerosol layer height from RSP with measurements from the Cloud Physics Lidar (CPL) showing a mean absolute difference of less than 1 km. Furthermore, we found that the information on aerosol layer height is provided for large part by the multi-angle polarization measurements with high accuracy rather than the multi-angle intensity measurements. The information on aerosol layer height is significantly decreased when the shortest RSP wavelength (410 nm) is excluded from the retrieval and is virtually absent when 550 nm is used as shortest wavelength.

In this paper, an algorithm for the retrieval of aerosol and land surface properties from airborne spectropolarimetric measurements – combining neural networks and an iterative scheme based on Phillips–Tikhonov regularization – is described. The algorithm – which is an extension of a scheme previously designed for ground-based retrievals – is applied to measurements from the Research Scanning Polarimeter (RSP) on board the NASA ER-2 aircraft. A neural network, trained on a large data set of synthetic measurements, is applied to perform aerosol retrievals from real RSP data, and the neural network retrievals are subsequently used as a first guess for the Phillips–Tikhonov retrieval. The resulting algorithm appears capable of accurately retrieving aerosol optical thickness, fine-mode effective radius and aerosol layer height from RSP data. Among the advantages of using a neural network as initial guess for an iterative algorithm are a decrease in processing time and an increase in the number of converging retrievals.

Several single-platform satellite missions have been designed during the past decades in order to retrieve the atmospheric concentrations of anthropogenic greenhouse gases (GHG), initiating worldwide efforts towards better monitoring of their sources and sinks. To set up a future operational system for anthropogenic GHG emission monitoring, both revisit frequency and spatial resolution need to be improved. The Space CARBon Observatory (SCARBO) project aims at significantly increasing the revisit frequency of spaceborne GHG measurements, while reaching state-of-the-art precision requirements, by implementing a concept of small satellite constellation. It would accommodate a miniaturized GHG sensor named NanoCarb coupled with an aerosol instrument, the multi-angle polarimeter SPEXone. More specifically, the NanoCarb sensor is a static Fabry-Perot imaging interferometer with a 2.3 × 2.3 km2 spatial resolution and 200 km swath. It samples a truncated interferogram at optical path differences (OPDs) optimally sensitive to all the geophysical parameters necessary to retrieve column-averaged dry-air mole fractions of CO2 and CH4 (hereafter XCO2 and XCH4). In this work, we present the Level 2 performance assessment of the concept proposed in the SCARBO project. We perform inverse radiative transfer to retrieve XCO2 and XCH4 directly from synthetic NanoCarb truncated interferograms, and provide their systematic and random errors, column vertical sensitivities and degrees of freedom as a function of five scattering error-critical atmospheric and observational parameters. We show that NanoCarb XCO2 and XCH4 systematic retrieval errors can be greatly reduced with SPEXone posterior outputs used as improved prior aerosol constraints. For two thirds of the soundings, located at the centre of the 200 km NanoCarb swath, XCO2 and XCH4 random errors span 0.5–1 ppm and 4–6 ppb, respectively, compliant with their respective 1-ppm and 6-ppb precision objectives. Finally, these Level 2 performance results are parameterized as a function of the explored scattering error-critical atmospheric and observational parameters in order to time-efficiently compute extensive L2 error maps for future CO2 and CH4 flux estimation performance studies.