Search

The development of dual phase soft magnetic laminate for advanced electric machines at General Electric is summarized, including alloy development, properties, manufacturing trials, prototype experience, potential applications, and future material development. Dual phase soft magnetic laminates provide the flexibility to tune magnetic/non-magnetic state at the desired locations, using solution nitriding treatment with protective mask/coating. This enabling material technology benefits electric machine performance by reducing flux leakage in the laminates. It also decouples the electromagnetic and mechanical design, which opens up the design space for advanced electric machines. Magnetic and mechanical properties of dual phase laminates were compared to commercial FeSi and FeCo soft magnetic laminates. Driven by the market needs for high power density and high-speed electric machines, a synchronous reluctance (SynRel) machine without PMs using dual phase soft magnetic laminates was assessed in machine electromagnetic performance as well as rotor stress analysis by finite element simulation. Successful prototype build and testing further retired manufacturing risks and advanced the technology maturity level. Future material development with higher mechanical strength, higher saturation magnetization, higher permeability, and lower loss are highly desired for ground and air transportation electrification. [ABSTRACT FROM AUTHOR]

Outer-rotor switched reluctance machines (SRMs) have drawn much attention as promising candidates for in-wheel direct-drive motors of future electric vehicles. This article presents a systematic performance comparison of three outer-rotor SRM topologies for in-wheel traction applications in terms of the specific torque, electromagnetic efficiency, torque ripple, radial force, and mechanical aspects. A generalized design optimization framework for SRMs is proposed to enable the fast evaluation of large numbers of designs generated from the differential evolution by incorporating an analytical current profile estimation into the transient finite element analysis. The relationship between the saliency ratio and converter volt-ampere rating is also discussed. The calculations are then benchmarked with the experimental results from an existing prototype. The effectiveness of the performance prediction method and the proposed optimization approach is validated. [ABSTRACT FROM AUTHOR]

Switched reluctance (SR) machines are attractive because they present relatively high efficiency and torque density in spite of lacking permanent magnets. This paper focuses on a two-objective optimization of an external rotor SR motor with a stator that has concentrated coils and a rotor with magnetically isolated modules. The objectives are minimum loss and mass, and 11 independent dimensionless geometric variables are considered as inputs that affect them. A combined design of experiments (DOE) and differential evolution (DE) approach is proposed. The DOE methodology is used to reduce the search space by eliminating from consideration input variable values, leading to poor-performing designs. Following this initial DOE study, an optimization study based on DE is run over the reduced search space, which leads to significant savings in computation time. Furthermore, a directed graph-based method for comparing different designs on the Pareto front to rank the best compromise designs is proposed. [ABSTRACT FROM AUTHOR]

A novel automated design optimization procedure based on the application of an ultrafast computationally efficient finite-element analysis (CE-FEA) for current-regulated synchronous reluctance machines supplied from power electronic converters is proposed. The CE-FEA uses only a minimum number of magnetostatic solutions in order to comprehensively evaluate performance, including ripple torque and core losses. The optimization algorithm is based on differential evolution, and uses as independent variables the torque angle and ratios for a generic rotor topology with four flux barriers. Two problems, one with two and the other with three objectives, are studied and results are compared. Global performance indices and objectives incorporate the effect of average torque output, losses, torque ripple, and power factor at fixed cost. It is shown that through optimal studies with more than 5000 candidate designs, high output power, high efficiency, and low torque ripple can be achieved, while the relatively low power factor remains an inherent limitation of synchronous reluctance technology. Simulations are validated versus tests from a 10-hp 1800-r/min prototype. [ABSTRACT FROM AUTHOR]

A motor for in-wheel electric vehicle (EV) requires high efficiency and specific torque. In view of this, permanent-magnet brushless dc (PM BLDC) motor is most commonly employed for this application. However, due to the increasing cost of PMs, machines that do not use PMs are attracting interest. Switched reluctance motor (SRM), with its simple and robust construction, along with fault tolerant operation, is a viable option for in-wheel EV application. However, the SRM has low specific torque as compared with BLDC. Therefore, design improvements are required to make SRM a viable alternative to BLDC motor. In this paper, a new 12/26 pole SRM with high specific torque is proposed for in-wheel EV application. This machine has segmented-rotor-type construction. Also, concentrated-winding arrangement is used, ensuring low end-winding volume and copper loss. The developed machine also has high efficiency. In order to verify the design, the prototype of the machine is fabricated, and experimental results are presented. [ABSTRACT FROM AUTHOR]