Search

This paper presents a dual-core two-parameter optical fiber sensor based on the surface plasmonic resonance (SPR) effect. It is analyzed by the finite element method. The proposed sensor is a dual-channel structure designed with photonic crystal fiber (PCF) as the base material: one channel is coated with a gold film to measure the refractive index (RI) of the solution to be measured, and the other channel is coated with a gold film and polydimethylsiloxane to measure the temperature of the solution to be measured. The exposed microslot structure on both sides reduces the complexity of sensing measurements. The results show that the maximum RI sensitivity of the sensor is 19,900 nm/RIU, and the maximum sensitivity to temperature is 8.7 nm/℃. This work is conducive to realizing a PCF sensor with high sensitivity, large measurement range, real-time monitoring, and easy preparation. As a result, the sensor is expected to be widely used in fields such as biology and chemicals. [ABSTRACT FROM AUTHOR]

Surface plasmon resonance (SPR) sensing methods enable highly sensitive, fast response, and label-free analysis of biomolecular interactions. For SPR sensors, sensitivity and full width at half maximum (FWHM) are two incompatible performance parameters. We propose a refractive index (RI) sensor using a dual-core photonic crystal fiber (PCF) and SPR effects to achieve high sensitivity and a narrow FWHM simultaneously. The air holes of the sensor appear in a hexagonal arrangement, and polishing technology introduces two polishing planes into the cladding. A gold film is deposited on one side of the polished plane to form a highly sensitive RI sensing channel. Five gold nanowires are deposited on the other side of the polished plane to form a RI sensing channel with a narrow FWHM. We analyzed and optimized its structural parameters using the finite element method and determined the optimal structural parameters. The numerical results demonstrate that the maximum sensitivity of the sensor is 21,000 nm/RIU with the narrowest FWHM of 31 nm. Therefore, measuring the refractive index simultaneously with two sensing channels increases the detection accuracy of the measurement. In addition, the findings further indicate that variations in structural parameters do not significantly impact the sensing performance of the sensor, which makes the production of the sensor relatively simple. In conclusion, our work provides a new research method for realizing high sensitivity and a narrow FWHM simultaneously. [ABSTRACT FROM AUTHOR]

A D-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor is proposed to measure the refractive index in visible and near-infrared regions. Compared with traditional PCF, the use of D-shaped PCF can avoid filling materials and coatings in the hole. The plasma material of sensors is silver, and graphene is coated on the surface of the silver film. Graphene layer can not only prevent the oxidation of the silver but also improve the performance of the sensor. Then the influence of structural parameters on the sensor performance is studied by the finite element method (FEM). Results show that the performance of the sensor is not sensitive to the structural parameters, which makes the sensor has a good manufacturing tolerance. Moreover, when the refractive index (RI) of the analyte is 1.33 ~ 1.41, the maximum wavelength sensitivity is 13,750 nm/RIU, and the corresponding RI resolution is 7.27 × 10−6 RIU−1. In addition, the maximum figure of merit is 201 RIU−1. The proposed sensor is advanced with high sensitivity, simple structure and big fabrication tolerance, which could become a competitive candidate for water pollution monitoring, medical diagnosis, biochemical analysis, and detection fields. [ABSTRACT FROM AUTHOR]

We have experimentally demonstrated an ultra-high sensitivity gold-based fiber refractive index (RI) sensor whose main structure is composed of multimode fiber (MMF) and photonic crystal fiber (PCF). The gold film is deposited on V-shaped PCF by magnetron sputtering, and sensing experiments are performed based on the principle of surface plasmon resonance (SPR). Numerical simulation results indicate that the cladding mode of the V-shaped PCF is more capable of stimulating the SPR effect than the core mode. The experimental results show that the RI measurement range of the sensor is 1.333–1.421, with a maximum sensitivity of 10015 nm/RIU. In addition to RI sensing, sensing probes can be coated with polydimethylsiloxane (PDMS) on a gold film for temperature sensing. For temperature detection, the range is from 10 to 100 °C and the maximum sensitivity is 3.5 nm/℃. Besides high sensitivity in RI measurement, the proposed sensor also has good sensing performance in temperature sensing. With the advantages of high sensitivity, good stability, and easy preparation, this sensor has become an important reference in the field of high-performance sensing. • This work proposes a refractive index sensor with ultra-high sensitivity, with a maximum sensitivity of 10015 nm/RIU. • The sensor uses PCF with a large cladding area as the substrate and is easy to prepare. • The sensor selects a stable gold film, which is not easily oxidized, as the plasma material. • The maximum sensitivity of this sensor used in the field of temperature sensing is 3.5 nm/°C. [ABSTRACT FROM AUTHOR]

• A broadband dual-parameter sensor is proposed and demonstrated. • The sensor cascaded gold film and silver film, which made the range of parameters to be measured larger. • The two detection channels are independent of each other and do not affect each other. • The sensor is simple in structure and easy to prepare. Dual-parameter sensor has relatively small detection range because of restriction on resonance wavelength range. To overcome this problem, we propose a cascaded gold and silver SPR dual-parameter sensor. As the resonance wavelength ranges of gold and silver are different, cascading the two metals to make one sensor broadens the resonance wavelength range, thus increasing the sensor's detection range. The sensor uses no-core fiber as the probe and multimode fiber (MMF) as the input (output) coupler, which constitutes an MMF-NCF-MMF sensing structure. By using Magnetron sputtering, gold and silver are deposited on the outer surface of NCF. The effects of coating time and NCF length on the sensing performance were experimentally investigated to determine the optimal coating time and NCF length. The experimental results shows that the two channels of the sensor are independent of each other without crosstalk and have an extensive range of parameters to be measured. The maximum sensitivity is 3231 nm/RIU in the RI range of 1.333–1.385. It has a maximum temperature sensitivity of 6.68 nm/°C from 0 to 80 °C. In addition, the sensor has good stability and repeatability. The proposed sensor has a simple and integrated structure and is suitable for applications requiring large detection range sensing. [ABSTRACT FROM AUTHOR]

• A compact dual-channel sensor is proposed and demonstrated. • The sensor can detect temperature and refractive index simultaneously. • The two detection channels are independent and do not interfere with each other. • The sensor structure is simple and easy to prepare. To improve the integration of sensors and meet the trend of miniaturization of devices, we propose and demonstrate a compact dual-channel surface plasmon resonance (SPR) fiber sensor for detecting refractive index (RI) and temperature. In this sensor, we chose the simplest structure of optical fiber: no-core fiber (NCF), as the sensing probe. Then the silver film was deposited on the NCF surface using magnetron sputtering to excite the SPR effect. Two sensing channels were constructed on the NCF, one channel deposited with silver film for RI detection, and another channel deposited with PDMS and silver film for temperature detection. Such a construction makes the sensor compact and small. The performance of the proposed sensor is studied theoretically and experimentally. The experiment shows that the maximum sensitivity of the sensor is 3039 nm/RIU and 3.53 nm/°C when the RI ranges from 1.333 to 1.375 and the temperature ranges from 0 °C to 70 °C, respectively. The significant advantage of our proposed sensor is its simple, compact, and easy-to-prepare structure, which opens up a new direction for device miniaturization. [ABSTRACT FROM AUTHOR]

• This work explains that TiO 2 and ZnO can significantly modulate the resonance wavelength range of SPR sensors. • It is experimentally demonstrated that the two oxide films have the effect of enhancing the sensitivity of the SPR sensor. • The dual-channel sensor prepared using the cascade method of two oxide films has a wide sensing bandwidth. • The performance of the proposed dual-channel sensor is highly stable and not easily oxidized. In order to broaden the bandwidth of SPR dual-channel sensors, this work proposes to tune the resonance wavelength range of the sensors using a cascade of ZnO and TiO 2 films. The two oxides are transversely deposited on Ag-based no-core fiber to form a dual-channel sensor that can be used for refractive index (RI) and temperature measurements. Among them, Ag/ZnO is used for RI sensing and Ag/TiO 2 /PDMS is used for temperature sensing. The simulation and experimental results show that ZnO and TiO 2 have the effect of broadening the resonance wavelength range by 44 nm and 72 nm, respectively. In addition, when the two oxides are added to the Ag-based sensor, the SPR valley is red-shifted, and the sensitivity is enhanced. The experimental results also show that the two oxides make the silver film less susceptible to oxidation and enhance the stability of the sensor. Numerical results show that the maximum RI sensitivity of the sensor is 4630 nm/RIU, and the temperature sensitivity is 5.8 nm/°C. The range of the object to be measured is 1.333–1.385, 0–50 °C. This ability to broaden the sensor bandwidth provides a new direction for designing and applying high-performance multi-channel SPR sensors. [ABSTRACT FROM AUTHOR]

• This work utilizes TiO 2 film to tune the sensing bandwidth and the resonance wavelength range to the near-infrared band. • A dual-channel sensor with wide bandwidth is proposed. • The experimental results show that the RI range of the sensor is 1.333–1.385, and the temperature range is 10–80 ℃. • The sensor has simple structure and good repeatability. Facing the diversity and complexity of the types of parameters to be measured, multi-channel surface plasmon resonance (SPR) fiber sensors provide an excellent solution. However, the sensing bandwidth is a key factor affecting the sensor performance. In this paper, we explore a method to modulate the sensing bandwidth using the TiO 2 film. A dual-channel SPR sensor with a wide sensing bandwidth is proposed. In this sensor, no-core fiber (NCF) is used as the sensing probe, and multimode fibers are used for the transmission of optical signals. The sensor has a cascaded composite film structure, the region coated with Ag film as the refractive index sensing region and the region coated with Ag/TiO 2 /PDMS as the temperature sensing region. The experimental results show that the sensing bandwidth of the sensor varies for different TiO 2 coating times. It indicates that the TiO 2 film can regulate the sensing bandwidth flexibly. Therefore, to achieve the optimal sensing effect, the TiO 2 coating time can be flexibly adjusted according to the RI characteristics of the environment. The maximum sensitivity of this dual-channel sensor is 4.5 nm/°C and 3151 nm/RU when the temperature range is between 10 and 80 °C and the RI range is between 1.333 and 1.385, respectively. In addition, we discuss the repeatability and stability of this dual-channel sensor. [ABSTRACT FROM AUTHOR]