Search

The dc power collected by radio frequency energy harvesting (RFEH) absorbing surfaces is limited by their physical aperture. Here, a compact, conformable, and ultrathin sub-1 GHz large-area RFEH surface is proposed based on electrically small ($ka=0.58$) “wire-type” rectenna elements, with an effective area exceeding its physical aperture size. Using optimized large-signal complex source tuning, the rectifiers achieve up to 36% measured power conversion efficiency (PCE) at =20 dBm. The proposed 15 cm-diameter six-element array generates a 27.5 $\mu \text{W}$ at 1 V output from a $0.17~\mu \text{W}$ /cm2 incident power density across a 40 $\text{k}\Omega $ load. Owing to its series connection, the voltage output is boosted, and the load resistance dependence is suppressed enabling over 60% of the maximum RF-to-dc PCE to be preserved for loads between 7 and 100 $\text{k}\Omega $ , with an area-normalized figure-of-merit nearly 100% higher than previous arrays. The proposed array is integrated with a commercial DC-DC converter and demonstrated powering a Bluetooth low energy (BLE) wireless sensor node (WSN) from an unprecedented incident power density of 0.25 $\mu \text{W}$ /cm2. A practical demonstration using a commercial 3 W, 915 MHz Powercast source is presented, showing an 11 m operation range with a 1 V output and illustrating the impact of polarization mismatch on the proposed array. [ABSTRACT FROM AUTHOR]

This article presents a textile antenna for dual-band simultaneous wireless information and power transfer (SWIPT). The antenna operates as a 2.4 GHz off-body communications antenna and a sub-1 GHz (785–875 MHz) broad-beam rectenna. Incorporated within the broadside microstrip antenna is a high-impedance rectenna for sub-1 GHz power harvesting. Utilizing antenna-rectifier co-design, the rectenna eliminates the rectifier matching network. The textile antenna is fabricated on a felt substrate and utilizes conductive fabrics for the antenna. At 2.4 GHz, the antenna achieves a realized gain of 7.2 dBi on a body phantom and a minimum radiation efficiency of 63%, with and without the rectifier. The rectenna achieves a best-in-class RF to dc efficiency of 62% from 0.8 $\mu \text{W}$ /cm2, representing over 25% improvement over state-of-the-art textile rectennas and demonstrating that SWIPT does not detrimentally affect the energy harvesting or communications performance. The antenna/rectenna occupies an electrically small area of $0.213\times 0.19\,\,\lambda ^{2}_{0}$. This antenna is the first dual-band, dual-mode antenna demonstrated on textiles for SWIPT applications and the first dual-band matching network-free SWIPT rectenna. [ABSTRACT FROM AUTHOR]

Despite the recent advances in textile antennas, in complete systems such as a rectenna, the efficiency of fully textile solutions has been over 46% lower than hybrid textile/rigid implementations. This article presents a fully textile rectenna for ultralow-power sub-μW/cm2 applications. A dual-polarized omnidirectional low-profile textile antenna is presented. The rectenna is based on a compact inductively matched rectifier. The textile-based rectifier occupies 0.22 cm2 and achieves a state-of-the-art power conversion efficiency (PCE) of 41.8% at −20 dBm, at 820 MHz, despite its lossy substrate. A triple-band rectifier is then designed and fabricated to show the scalability of the matching approach. The rectifier is characterized using a new figure of merit “average PCE” over a time period while charging a capacitor. Time-varying S-parameters are used to quantify the impact of the capacitor’s charge on the impedance matching. The rectifier directly charges a 1.32 mF capacitor up to 1 V in 0.41 and 4.5 s from 10 and 0 dBm, respectively. Wireless testing of the proposed rectenna demonstrates over 50% and 40% (PCE) below 1 μW/cm2 in space and on-body, respectively. The rectenna efficiently receives power from mismatched polarization and with a 360° half-power beamwidth. [ABSTRACT FROM AUTHOR]

Millimeter-wave (mmWave) bands, a key part of future 5G networks, represent a potential channel for RF energy harvesting, where the high-gain antenna arrays offer improved end-to-end efficiency compared with sub-6-GHz networks. This article presents a broadband mmWave rectenna, the first rectenna realized on a flexible textile substrate for wearable applications. The proposed novel antenna’s bandwidth extends from 23 to 40 GHz, with a minimum radiation efficiency of 67% up to 30 GHz, over 3-dB improvement compared with a standard patch. A stable gain of more than 8 dB is achieved based on a textile reflector plane. The antenna is directly connected to a textile-based microstrip voltage doubler rectifier utilizing commercial Schottky diodes. The rectifier is matched to the antenna using a tapered line feed for high-impedance matching, achieving broadband high voltage sensitivity. The rectifier has a peak RF–dc efficiency of 12% and a 9.5-dBm 1-V sensitivity from 23 to 24.25 GHz. The integrated rectenna is demonstrated with more than 1.3-V dc output from 12 dBm of mmWave wireless power across a 28% fractional bandwidth from 20 to 26.5 GHz, a 15% half-power fractional bandwidth, and a peak output of 6.5 V from 20 dBm at 24 GHz. [ABSTRACT FROM AUTHOR]

Radio-frequency (RF) energy harvesting (RFEH) and radiative wireless power transfer (WPT) have attracted significant interest as methods of enabling battery-free sustainable wireless networks. Rectifying antennas (rectennas) are the cornerstone of WPT and RFEH systems and critically affect the amount of dc power delivered to the load. The antenna element of the rectenna directly impacts the radiation-to-ac harvesting efficiency, which can vary the harvested power by orders of magnitude. In this article, antenna designs employed in WPT and ambient RFEH applications are reviewed. Reported rectennas are categorized based on two main criteria: the antenna-rectifier impedance bandwidth and the antenna's radiation properties. For each criterion, the figure of merit (FoM) is identified for different applications and reviewed comparatively. [ABSTRACT FROM AUTHOR]

This paper presents a flexible 2.45-GHz wireless power harvesting wristband that generates a net dc output from a −24.3-dBm RF input. This is the lowest reported system sensitivity for systems comprising a rectenna and impedance-matching power management. A complete system has been implemented comprising: a fabric antenna, a rectifier on rigid substrate, a contactless electrical connection between rigid and flexible subsystems, and power electronics impedance matching. Various fabric and flexible materials are electrically characterized at 2.45 GHz using the two-line and the T-resonator methods. Selected materials are used to design an all-textile antenna, which demonstrates a radiation efficiency above 62% on a phantom irrespective of location, and a stable radiation pattern. The rectifier, designed on a rigid substrate, shows a best-in-class efficiency of 33.6% at −20 dBm. A reliable, efficient, and wideband contactless connection between the fabric antenna and the rectifier is created using broadside-coupled microstrip lines, with an insertion loss below 1 dB from 1.8 to over 10 GHz. A self-powered boost converter with a quiescent current of 150 nA matches the rectenna output with a matching efficiency above 95%. The maximum end-to-end efficiency is 28.7% at −7 dBm. The wristband harvester demonstrates net positive energy harvesting from −24.3 dBm, a 7.3-dB improvement on the state of the art. [ABSTRACT FROM PUBLISHER]